SQUARE Clock Drivers & Buffers 401

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Input Conditioning	No. of Functions	Technology	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Maximum Same Edge Skew (tskwd)	Minimum Operating Temperature	Terminal Finish	No. of True Outputs	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
NB7L11MMNR2	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1			2.5	2.5/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	.15 ns		Clock Drivers	.5 mm	85 Cel		.015 ns	-40 Cel	TIN LEAD	2	QUAD	8000 MHz	S-XQCC-N16		3.465 V	1 mm	3 mm	Not Qualified	2.375 V			e0		235	3 mm	7L
NB7L11MMN	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1			2.5	2.5/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	.15 ns		Clock Drivers	.5 mm	85 Cel		.015 ns	-40 Cel	TIN LEAD	2	QUAD	8000 MHz	S-XQCC-N16		3.465 V	1 mm	3 mm	Not Qualified	2.375 V			e0		235	3 mm	7L
NB7L14MMNR2	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1			2.5	2.5/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	.15 ns		Clock Drivers	.5 mm	85 Cel		.015 ns	-40 Cel	TIN LEAD	4	QUAD	8000 MHz	S-XQCC-N16		3.465 V	1 mm	3 mm	Not Qualified	2.375 V			e0		235	3 mm	7L
NB7L14MMN	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1			2.5	2.5/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	.15 ns		Clock Drivers	.5 mm	85 Cel		.015 ns	-40 Cel	TIN LEAD	4	QUAD	8000 MHz	S-XQCC-N16		3.465 V	1 mm	3 mm	Not Qualified	2.375 V			e0		235	3 mm	7L
CDCU877ARTBR	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	CMOS		1.8	1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20		9 Amp	Clock Drivers	.5 mm	85 Cel	3-STATE	.035 ns	-40 Cel		10	QUAD	340 MHz	S-PQCC-N40		1.9 V	.9 mm	6 mm	Not Qualified	1.7 V				NOT SPECIFIED	NOT SPECIFIED	6 mm	877
NB2305AC1DTG	Onsemi	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1	CMOS		3.3	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25		12 Amp	Clock Drivers	.65 mm	70 Cel		.25 ns	0 Cel	TIN	4	DUAL	133.33 MHz	S-PDSO-G8	1	3.6 V	1.2 mm	3 mm	Not Qualified	3 V			e3		260	4.4 mm	2305
NB2305AC1HDTG	Onsemi	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1	CMOS		3.3	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25		12 Amp	Clock Drivers	.65 mm	70 Cel		.25 ns	0 Cel	TIN	4	DUAL	133.33 MHz	S-PDSO-G8	1	3.6 V	1.2 mm	3 mm	Not Qualified	3 V			e3		260	4.4 mm	2305
NB2305AI1HDTG	Onsemi	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1	CMOS		3.3	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25		12 Amp	Clock Drivers	.65 mm	85 Cel		.25 ns	-40 Cel	TIN	4	DUAL	133.33 MHz	S-PDSO-G8	3	3.6 V	1.2 mm	3 mm	Not Qualified	3 V			e3	30	260	4.4 mm	2305
CDC586PAHG4	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	52	TQFP	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		3.3	3.3		FLATPACK, THIN PROFILE	TQFP52,.47SQ		32 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE	.5 ns	0 Cel	NICKEL PALLADIUM GOLD	12	QUAD	100 MHz	S-PQFP-G52	4	3.6 V	1.2 mm	10 mm	Not Qualified	3 V			e4	30	260	10 mm	586
NB7L111MMN	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	52	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1			2.5	2.5/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC52,.31SQ,20	.28 ns		Clock Drivers	.5 mm	85 Cel		.02 ns	-40 Cel	TIN LEAD	10	QUAD		S-XQCC-N52		2.625 V	1 mm	8 mm	Not Qualified	2.375 V		ALSO OPERATES WITH 3.3V SUPPLY	e0		235	8 mm	7L
MC100LVEP11DTG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL	TUBE	2.5	+-2.375/+-3.8		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.31 ns		Clock Drivers	.65 mm	85 Cel		.02 ns	-40 Cel	MATTE TIN	2	DUAL		S-PDSO-G8	3	3.8 V	1.1 mm	3 mm	Not Qualified	2.375 V	50 mA	NECL MODE : VCC = 0V WITH VEE = -2.375V TO -3.8V	e3	30	260	3 mm	100LVE
MC100LVEP11MNR4	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1	ECL		2.5	+-2.375/+-3.8		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20	.31 ns		Clock Drivers	.5 mm	85 Cel		.02 ns	-40 Cel	TIN	2	DUAL		S-XDSO-N8	1	3.8 V	1 mm	2 mm	Not Qualified	2.375 V		NECL MODE : VCC = 0V WITH VEE = -2.375V TO -3.8V	e3			2 mm	100LVE
CDCLVD110VFG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			2.5	2.5		FLATPACK, LOW PROFILE	QFP32,.35SQ,32	3 ns		Clock Driver	.8 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	10	QUAD	150 MHz	S-PQFP-G32	1	2.625 V	1.6 mm	7 mm	Not Qualified	2.375 V			e4	30	260	7 mm	110
CDCLVD110VFRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		TR	2.5	2.5		FLATPACK, LOW PROFILE	QFP32,.35SQ,32	3 ns		Clock Driver	.8 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	10	QUAD	150 MHz	S-PQFP-G32	1	2.625 V	1.6 mm	7 mm	Not Qualified	2.375 V	130 mA		e4	30	260	7 mm	110
CDCLVP110VFRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		TR	2.5	-2.5/-3.3/2.5/3.3		FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.37 ns	5 Amp	Clock Drivers	.8 mm	85 Cel		.03 ns	-40 Cel	NICKEL PALLADIUM GOLD	10	QUAD	3500 MHz	S-PQFP-G32	1	3.8 V	1.6 mm	7 mm	Not Qualified	2.375 V	380 mA	LVECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V; ALSO OPERATES AT 3.3 V SUPPLY	e4	30	260	7 mm	110
MC100LVE222FAG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	52	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		3.3	-3.3/-5		FLATPACK, LOW PROFILE	QFP52,.47SQ	1.33 ns		Clock Drivers	.65 mm	85 Cel		.05 ns	-40 Cel	TIN	15	QUAD	1500 MHz	S-PQFP-G52	2	3.8 V	1.7 mm	10 mm	Not Qualified	3 V		NECL MODE: VCC=0V WITH VEE = -3V TO -3.8V	e3		260	10 mm	100LVE
MC10EL11DTG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		5	-5.2		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.34 ns		Clock Drivers	.65 mm	85 Cel		.02 ns	-40 Cel	TIN	2	DUAL		S-PDSO-G8	3	5.7 V	1.1 mm	3 mm	Not Qualified	4.2 V		NECL MODE: VCC=0 WITH VEE= -4.2V TO -5.7V	e3	30	260	3 mm	10EL
NB100LVEP221FAG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	52	HLQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		2.5	-2.5/-3.3/2.5/3.3		FLATPACK, HEAT SINK/SLUG, LOW PROFILE	QFP52,.47SQ	.71 ns		Clock Drivers	.65 mm	85 Cel		.05 ns	-40 Cel	TIN	20	QUAD		S-PQFP-G52	3	3.8 V	1.7 mm	10 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V	e3		260	10 mm	100LVE
AD9511BCPZ	Analog Devices	PLL BASED CLOCK DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1			3.3			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	1.76 ns			.5 mm	85 Cel		1.43 ns	-40 Cel	MATTE TIN	5	QUAD	1200 MHz	S-XQCC-N48	3	3.465 V	1 mm	7 mm	Not Qualified	3.135 V			e3	30	260	7 mm	9511
CDCE62002RHBR	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	MUX	1		TR	3.3		5 pF	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					.5 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	4	QUAD	1175 MHz	S-PQCC-N32	2	3.6 V	1 mm	5 mm	Not Qualified	3 V			e4	30	260	5 mm	CDCE
SN65LVELT23DGK	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	STANDARD	2		TUBE	3.3		20 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		2.5 ns	24 Amp		.65 mm	85 Cel		.18 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL	180 MHz	S-PDSO-G8	1	3.6 V	1.1 mm	3 mm	Not Qualified	3 V			e4	30	260	3 mm	65LVEL
AD9510BCPZ	Analog Devices	PLL BASED CLOCK DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1	BICMOS		3.3	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC64,.35SQ,20	1.76 ns		Clock Drivers	.5 mm	85 Cel		1.43 ns	-40 Cel	MATTE TIN	8	QUAD	1200 MHz	S-XQCC-N64	3	3.465 V	1 mm	9 mm	Not Qualified	3.135 V			e3	30	260	9 mm	9510
MC100E310FNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5	+-5		CHIP CARRIER	LDCC28,.5SQ	.8 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	TIN	8	QUAD	700 MHz	S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	4.2 V		NECL MODE: 0V VCC WITH VEE = -4.2V TO -5.7V	e3		260	11.505 mm	100E
MC100LVE111FNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		3.3	+-3/+-3.8		CHIP CARRIER	LDCC28,.5SQ	.68 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	MATTE TIN	9	QUAD		S-PQCC-J28	3	3.8 V	4.57 mm	11.505 mm	Not Qualified	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e3	30	260	11.505 mm	100LVE
MC100LVE111FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		3.3	+-3/+-3.8		CHIP CARRIER	LDCC28,.5SQ	.68 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	MATTE TIN	9	QUAD		S-PQCC-J28	3	3.8 V	4.57 mm	11.505 mm	Not Qualified	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e3	30	260	11.505 mm	100LVE
MC100EL11DTG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		5	-4.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.34 ns		Clock Drivers	.65 mm	85 Cel		.02 ns	-40 Cel	TIN	2	DUAL		S-PDSO-G8	3	5.7 V	1.1 mm	3 mm	Not Qualified	4.2 V		NECL MODE: VCC=0 WITH VEE= -4.2V TO -5.7V	e3	30	260	3 mm	100EL
CDCU877RHAT	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		TR	1.8	1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20		9 Amp	Clock Drivers	.5 mm	85 Cel	3-STATE	.035 ns	-40 Cel	NICKEL PALLADIUM GOLD	10	QUAD	340 MHz	S-PQCC-N40	3	1.9 V	1 mm	6 mm	Not Qualified	1.7 V			e4	30	260	6 mm	877
AD9512BCPZ-REEL7	Analog Devices	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1	CMOS		3.3	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	1.76 ns		Clock Drivers	.5 mm	85 Cel		1.43 ns	-40 Cel	MATTE TIN	5	QUAD	1200 MHz	S-XQCC-N48	3	3.465 V	1 mm	7 mm	Not Qualified	3.135 V			e3	30	260	7 mm	9512
AD9512BCPZ	Analog Devices	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1	CMOS		3.3	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	1.76 ns		Clock Drivers	.5 mm	85 Cel		1.43 ns	-40 Cel	MATTE TIN	5	QUAD	1200 MHz	S-XQCC-N48	3	3.465 V	1 mm	7 mm	Not Qualified	3.135 V			e3	30	260	7 mm	9512
CDCU877RHARG4	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		TR	1.8	1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20		9 Amp	Clock Drivers	.5 mm	85 Cel	3-STATE	.035 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	10	QUAD	340 MHz	S-PQCC-N40	3	1.9 V	1 mm	6 mm	Not Qualified	1.7 V			e4	NOT SPECIFIED	260	6 mm	877
CDCU877RHATG4	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		TR	1.8	1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20		9 Amp	Clock Drivers	.5 mm	85 Cel	3-STATE	.035 ns	-40 Cel	NICKEL PALLADIUM GOLD	10	QUAD	340 MHz	S-PQCC-N40	3	1.9 V	1 mm	6 mm	Not Qualified	1.7 V			e4	30	260	6 mm	877
MC100E210FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2	ECL		5	-4.5		CHIP CARRIER	LDCC28,.5SQ	.75 ns		Clock Drivers	1.27 mm	85 Cel		.075 ns	0 Cel	TIN	4	QUAD		S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	11.505 mm	100E
MC100EP11DTG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		3.3	-3.0/-5.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.3 ns		Clock Drivers	.65 mm	85 Cel		.12 ns	-40 Cel	MATTE TIN	2	DUAL		S-PDSO-G8	3	5.5 V	1.1 mm	3 mm	Not Qualified	3 V		NECL MODE: VCC=0 WITH VEE = -3.0V TO -5.5V	e3	30	260	3 mm	10EP
MC100EP210SFAG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2	ECL		2.5	2.5		FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.65 ns		Clock Drivers	.8 mm	85 Cel		.025 ns	-40 Cel	MATTE TIN	5	QUAD		S-PQFP-G32	2	2.625 V	1.6 mm	7 mm	Not Qualified	2.375 V			e3	30	260	7 mm	100E
MC100EP809FAG	Onsemi	LOW SKEW CLOCK DRIVER	COMMERCIAL EXTENDED	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		3.3	1.8,3.3		FLATPACK, LOW PROFILE	QFP32,.35SQ,32	1 ns		Clock Drivers	.8 mm	85 Cel	OPEN-EMITTER	.05 ns	0 Cel	MATTE TIN	9	QUAD	500 MHz	S-PQFP-G32	2	3.6 V	1.6 mm	7 mm	Not Qualified	3 V			e3	30	260	7 mm	100E
MC100H641FNG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL LATCHED	1	ECL		5	5		CHIP CARRIER	LDCC28,.5SQ	6.9 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel		.35 ns	0 Cel	TIN	9	QUAD	65 MHz	S-PQCC-J28		5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	100H
MC100H641FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL LATCHED	1	ECL		5	5		CHIP CARRIER	LDCC28,.5SQ	6.9 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel		.35 ns	0 Cel	TIN	9	QUAD	65 MHz	S-PQCC-J28		5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	100H
MC100H642FNG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5	5		CHIP CARRIER	LDCC28,.5SQ	5.75 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel		.5 ns	0 Cel	TIN	8	QUAD	100 MHz	S-PQCC-J28	3	5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	100H
MC100H642FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5	5		CHIP CARRIER	LDCC28,.5SQ	5.75 ns		Clock Drivers	1.27 mm	85 Cel		.5 ns	0 Cel	TIN	8	QUAD	100 MHz	S-PQCC-J28		5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	100H
MC100H643FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	COMMERCIAL EXTENDED	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL LATCHED	1	ECL		5	-4.5		CHIP CARRIER	LDCC28,.5SQ	5.5 ns	48 Amp	Clock Drivers	1.27 mm	85 Cel		.5 ns	0 Cel	TIN	8	QUAD		S-PQCC-J28		5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	100H
MC100H646FNG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5	5		CHIP CARRIER	LDCC28,.5SQ	6.4 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.5 ns	0 Cel	TIN	8	QUAD		S-PQCC-J28	3	5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	100H
MC100H646FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5	5		CHIP CARRIER	LDCC28,.5SQ	6.4 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.5 ns	0 Cel	TIN	8	QUAD		S-PQCC-J28	3	5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	100H
MC100LVE210FNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2	ECL		3.3	-3.3		CHIP CARRIER	LDCC28,.5SQ	.9 ns		Clock Drivers	1.27 mm	85 Cel		.075 ns	-40 Cel	TIN	4	QUAD		S-PQCC-J28	3	3.8 V	4.57 mm	11.505 mm	Not Qualified	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e3		260	11.505 mm	100LVE
MC100LVE210FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2	ECL		3.3	-3.3		CHIP CARRIER	LDCC28,.5SQ	.9 ns		Clock Drivers	1.27 mm	85 Cel		.075 ns	-40 Cel	TIN	4	QUAD		S-PQCC-J28		3.8 V	4.57 mm	11.505 mm	Not Qualified	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e3		260	11.505 mm	100LVE
MC100LVE310FNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		3.3	-3.3		CHIP CARRIER	LDCC28,.5SQ	.8 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	TIN	8	QUAD		S-PQCC-J28	3	3.8 V	4.57 mm	11.505 mm	Not Qualified	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e3		260	11.505 mm	100LVE
MC10E211FNG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5	-5.2		CHIP CARRIER	LDCC28,.5SQ	1.125 ns		Clock Drivers	1.27 mm	85 Cel	OPEN-EMITTER	.075 ns	0 Cel	TIN	6	QUAD		S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	4.2 V		NECL MODE: VCC = 0 WITH VEE = -4.2V TO -5.7V	e3		260	11.505 mm	10E
MC10E411FNG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		5	-5.2		CHIP CARRIER	LDCC28,.5SQ	.68 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	0 Cel	TIN	9	QUAD		S-PQCC-J28		5.5 V	4.57 mm	11.505 mm	Not Qualified	4.5 V		NECL MODE: VCC = 0V WITH VEE = -4.5V TO -5.5V	e3		260	11.505 mm	10E
MC10EP11DTG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		3.3	-3.0/-5.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.3 ns		Clock Drivers	.65 mm	85 Cel		.12 ns	-40 Cel	MATTE TIN	2	DUAL		S-PDSO-G8	3	5.5 V	1.1 mm	3 mm	Not Qualified	3 V		NECL MODE: VCC=0 WITH VEE = -3.0V TO -5.5V	e3	30	260	3 mm	10EP

Clock Drivers & Buffers

Clock drivers and buffers are two electronic components commonly used in digital systems to control the timing and distribution of clock signals.

Clock drivers are electronic components that generate a clock signal and distribute it to multiple components or devices within a digital system. The clock signal is a periodic waveform that synchronizes the timing of different operations within the system. The clock driver typically amplifies and shapes the clock signal to ensure that it meets the timing requirements of the system.

Buffers, on the other hand, are electronic components that amplify and isolate signals. In digital systems, buffers are often used to distribute clock signals to multiple components without degrading the quality of the signal. Buffers can help to reduce signal distortion, noise, and jitter, which can be particularly important in high-speed digital systems.

Buffers can also be used to isolate signals and prevent interference between different components or devices. They can be particularly useful in situations where the output of one device or component could damage another device or component.

Clock drivers and buffers can be used together to distribute clock signals throughout a digital system while maintaining signal integrity. The clock driver generates the clock signal and distributes it to the buffers, which then amplify and isolate the signal before distributing it to the various components or devices within the system.