OTHER Clock Drivers & Buffers 57

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Input Conditioning	No. of Functions	Technology	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Maximum Same Edge Skew (tskwd)	Minimum Operating Temperature	Terminal Finish	No. of True Outputs	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
NB3N3010BDG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			3.3			SMALL OUTLINE					1.27 mm	85 Cel		.7 ns	0 Cel	TIN	2	DUAL	12.3187 MHz	R-PDSO-G8	1	3.465 V	1.75 mm	3.9 mm	Not Qualified	3.135 V			e3	30	260	4.9 mm	3N
NB3N3010BDR2G	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			3.3			SMALL OUTLINE					1.27 mm	85 Cel		.7 ns	0 Cel	MATTE TIN	2	DUAL	12.3187 MHz	R-PDSO-G8	1	3.465 V	1.75 mm	3.9 mm	Not Qualified	3.135 V			e3	30	260	4.9 mm	3N
P3MS650100H-4CR	Onsemi	PLL BASED CLOCK DRIVER	OTHER	NO LEAD	4	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			1.8			SMALL OUTLINE, VERY THIN PROFILE					.5 mm	85 Cel			-20 Cel	NICKEL PALLADIUM GOLD	1	DUAL	30 MHz	R-PDSO-N4	1	2 V	.8 mm	1 mm		1.6 V		ALSO OPERATES FROM 2.3 TO 3.6V SUPPLY	e4	30	260	1.2 mm	3M
AD9512UCPZ-EP	Analog Devices	LOW SKEW CLOCK DRIVER	OTHER	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1	CMOS		3.3	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	1.76 ns		Clock Drivers	.5 mm	85 Cel		.65 ns	-55 Cel	NICKEL PALLADIUM GOLD	10	QUAD	1200 MHz	S-XQCC-N48	3	3.465 V	1 mm	7 mm	Not Qualified	3.135 V			e4	30	260	7 mm	9512
AD9578BCPZ-REEL7	Analog Devices	PLL BASED CLOCK DRIVER	OTHER	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1			2.5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					.5 mm	85 Cel	3-STATE		-25 Cel		8	QUAD	919 MHz	S-XQCC-N48	3	2.625 V	.8 mm	7 mm		2.375 V		ALSO OPERATES AT 3.3V NOMINAL SUPPLY VOLTAGE		30	260	7 mm	9578
AD9578BCPZ	Analog Devices	PLL BASED CLOCK DRIVER	OTHER	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1			2.5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					.5 mm	85 Cel	3-STATE		-25 Cel		8	QUAD	919 MHz	S-XQCC-N48	3	2.625 V	.8 mm	7 mm		2.375 V		ALSO OPERATES AT 3.3V NOMINAL SUPPLY VOLTAGE		30	260	7 mm	9578
HPA00441ZALR	Texas Instruments	PLL BASED CLOCK DRIVER	OTHER	BALL	176	TFBGA	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1						GRID ARRAY, THIN PROFILE, FINE PITCH					.65 mm	85 Cel			0 Cel	Tin/Silver/Copper (Sn/Ag/Cu)	0	BOTTOM		S-PBGA-B176	3		1.2 mm	8 mm					e1	NOT SPECIFIED	260	13.5 mm	SSQE
AD9508SCPZ-EP	Analog Devices	LOW SKEW CLOCK DRIVER	OTHER	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1	CMOS		2.5	2.5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	3.14 ns	10 Amp	Clock Driver	.5 mm	105 Cel		.965 ns	-55 Cel	NICKEL SILVER GOLD	8	QUAD	1200 MHz	S-XQCC-N24	3	2.625 V	.8 mm	4 mm	Not Qualified	2.375 V					260	4 mm	9508
AD9508SCPZ-EP-R7	Analog Devices	LOW SKEW CLOCK DRIVER	OTHER	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1			2.5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.14 ns			.5 mm	105 Cel		.965 ns	-55 Cel	NICKEL PALLADIUM GOLD	8	QUAD	1200 MHz	S-XQCC-N24	3	2.625 V	.8 mm	4 mm		2.375 V			e4	30	260	4 mm	9508
AD246JY	Analog Devices	LOW SKEW CLOCK DRIVER	OTHER	THROUGH-HOLE	4	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	1	HYBRID		15	15		VERTICAL IN-LINE	ZIP4/13,.1,.1			Clock Drivers	1.27 mm	85 Cel			-25 Cel		1	DUAL		R-PDXA-T4			15.9 mm	2.5 mm	Not Qualified	14.25 V				NOT SPECIFIED	NOT SPECIFIED		AD24
CDC2509CPWR	Texas Instruments	PLL BASED CLOCK DRIVER	OTHER	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		TR	3.3	3.3	30 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		12 Amp	Clock Drivers	.65 mm	85 Cel	SERIES-RESISTOR	.2 ns	0 Cel	NICKEL PALLADIUM GOLD	9	DUAL	125 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V	.01 mA		e4	30	260	7.8 mm	2509
CDC2510CPWR	Texas Instruments	PLL BASED CLOCK DRIVER	OTHER	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		TR	3.3	3.3	30 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		12 Amp	Clock Driver	.65 mm	85 Cel	SERIES-RESISTOR	.2 ns	0 Cel	NICKEL PALLADIUM GOLD	10	DUAL	125 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V			e4	30	260	7.8 mm	2510
CDCVF2509PWG4	Texas Instruments	PLL BASED CLOCK DRIVER	OTHER	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS	TUBE	3.3	3.3	25 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25	3.9 ns	12 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE WITH SERIES RESISTOR	.1 ns	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	9	DUAL	175 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V			e4	NOT SPECIFIED	260	7.8 mm	2509
CDC857-3DGGG4	Texas Instruments	PLL BASED CLOCK DRIVER	OTHER	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			2.5	2.5,3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	6 ns	12 Amp	Clock Drivers	.5 mm	85 Cel	3-STATE	.1 ns	0 Cel		10	DUAL		R-PDSO-G48		2.7 V	1.2 mm	6.1 mm	Not Qualified	2.3 V		ALSO REQUIRES 3.3V PLL VOLTAGE		NOT SPECIFIED	NOT SPECIFIED	12.5 mm
CDC857-2DGGRG4	Texas Instruments	PLL BASED CLOCK DRIVER	OTHER	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			2.5	2.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	6 ns	12 Amp	Clock Drivers	.5 mm	85 Cel	3-STATE	.1 ns	0 Cel	NICKEL PALLADIUM GOLD	10	DUAL		R-PDSO-G48	2	2.7 V	1.2 mm	6.1 mm	Not Qualified	2.3 V			e4	30	260	12.5 mm
NBSG11MAG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	BALL	16	TBGA	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		2.5	-2.5/-3.3/2.5/3.3		GRID ARRAY, THIN PROFILE	LGA16,4X4,40	.16 ns		Clock Drivers	1 mm	70 Cel		.015 ns	-40 Cel	MATTE TIN	2	BOTTOM	10709 MHz	S-PBGA-B16		3.465 V	1.03 mm	4 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V	e3			4 mm	11
NBSG53AMAG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	BALL	16	TBGA	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			2.5	-2.5/-3.3/2.5/3.3		GRID ARRAY, THIN PROFILE	BGA16,4X4,40	.27 ns		Clock Drivers	1 mm	70 Cel			-40 Cel	Matte Tin (Sn)	1	BOTTOM		S-PBGA-B16		3.465 V	1.03 mm	4 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V	e3	40	260	4 mm	53
8524AYLFT	Integrated Device Technology	LOW SKEW CLOCK DRIVER	OTHER	GULL WING	64	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			3.3	3.3		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP64,.47SQ	2.7 ns		Clock Drivers	.5 mm	85 Cel		.08 ns	0 Cel	MATTE TIN	22	QUAD	500 MHz	S-PQFP-G64	3	3.465 V	1.2 mm	10 mm	Not Qualified	3.135 V			e3	30	260	10 mm	8524
SN74SSQEB32882ZALR	Texas Instruments	PLL BASED CLOCK DRIVER	OTHER	BALL	176	TFBGA	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1		TR	1.35	1.25/1.5		GRID ARRAY	BGA176,11X20,25			Other Logic ICs	.65 mm	85 Cel			0 Cel	TIN SILVER COPPER	0	BOTTOM	945 MHz	S-PBGA-B176	3		1.2 mm	8 mm	Not Qualified				e1	30	260	13.5 mm	S
NBSG111BAR2	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	BALL	49	LBGA	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		2.5	-2.5/-3.3/2.5/3.3		GRID ARRAY, LOW PROFILE	BGA49,7X7,40	.35 ns		Clock Drivers	1 mm	70 Cel		.02 ns	-40 Cel	TIN LEAD	10	BOTTOM		S-PBGA-B49	3	3.465 V	1.4 mm	8 mm	Not Qualified	2.375 V		NECL OPERATING RANGE: VCC = 0 V WITH VEE = -2.375 V TO -3.465 V	e0			8 mm	111
NBSG11BAR2	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	BALL	16	LBGA	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		2.5	-2.5/-3.3/2.5/3.3		GRID ARRAY, LOW PROFILE	BGA16,4X4,40	.16 ns		Clock Drivers	1 mm	70 Cel		.015 ns	-40 Cel	TIN LEAD	2	BOTTOM	10709 MHz	S-PBGA-B16	3	3.465 V	1.4 mm	4 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V	e0			4 mm	11
NBSG11BA	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	BALL	16	LBGA	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		2.5	-2.5/-3.3/2.5/3.3		GRID ARRAY, LOW PROFILE	BGA16,4X4,40	.16 ns		Clock Drivers	1 mm	70 Cel		.015 ns	-40 Cel	TIN LEAD	2	BOTTOM	10709 MHz	S-PBGA-B16	3	3.465 V	1.4 mm	4 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V	e0			4 mm	11
NBSG14BA	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	BALL	16	LBGA	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		2.5	-2.5/-3.3/2.5/3.3		GRID ARRAY, LOW PROFILE	BGA16,4X4,40	.15 ns		Clock Drivers	1 mm	70 Cel	SERIES-RESISTOR	.015 ns	-40 Cel	TIN LEAD	4	BOTTOM	10700 MHz	S-PBGA-B16	3	3.465 V	1.4 mm	4 mm	Not Qualified	2.375 V		RSNECL MODE: VCC = 0 V WITH VEE = -2.375 V TO -3.465 V	e0			4 mm	14
NB100EP223FAR2	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	GULL WING	64	HLFQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		3.3	1.8,3.3		FLATPACK, HEAT SINK/SLUG, LOW PROFILE, FINE PITCH	QFP64,.47SQ,20	1.2 ns		Clock Drivers	.5 mm	85 Cel		.065 ns	0 Cel	TIN LEAD	22	QUAD		S-PQFP-G64	2	3.6 V	1.6 mm	10 mm	Not Qualified	3 V			e0		235	10 mm	100E
NB100EP223FA	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	GULL WING	64	HLFQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		3.3	1.8,3.3		FLATPACK, HEAT SINK/SLUG, LOW PROFILE, FINE PITCH	QFP64,.47SQ,20	1.2 ns		Clock Drivers	.5 mm	85 Cel		.065 ns	0 Cel	TIN LEAD	22	QUAD		S-PQFP-G64	2	3.6 V	1.6 mm	10 mm	Not Qualified	3 V			e0		235	10 mm	100E
NB100LVEP224FAR2	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		2.5	-2.5/-3.3/2.5/3.3		FLATPACK, LOW PROFILE, FINE PITCH	QFP64,.47SQ,20	.75 ns		Clock Drivers	.5 mm	85 Cel		.04 ns	0 Cel	TIN LEAD	24	QUAD		S-PQFP-G64		3.8 V	1.6 mm	10 mm	Not Qualified	2.375 V		NECL MODE: VCC=0 WITH VEE = -2.375V TO -3.8V	e0		235	10 mm	100LVE
NBSG53ABAR2	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	BALL	16	LBGA	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			2.5	-2.5/-3.3/2.5/3.3		GRID ARRAY, LOW PROFILE	BGA16,4X4,40	.275 ns		Clock Drivers	1 mm	70 Cel			-40 Cel	TIN LEAD	1	BOTTOM		S-PBGA-B16	3	3.465 V	1.4 mm	4 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V	e0			4 mm	53
NBSG53ABA	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	BALL	16	LBGA	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			2.5	-2.5/-3.3/2.5/3.3		GRID ARRAY, LOW PROFILE	BGA16,4X4,40	.275 ns		Clock Drivers	1 mm	70 Cel			-40 Cel	TIN LEAD	1	BOTTOM		S-PBGA-B16	3	3.465 V	1.4 mm	4 mm	Not Qualified	2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V	e0			4 mm	53
CDC2509CPW	Texas Instruments	PLL BASED CLOCK DRIVER	OTHER	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		TUBE	3.3	3.3	30 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		12 Amp	Clock Drivers	.65 mm	85 Cel	SERIES-RESISTOR	.2 ns	0 Cel	NICKEL PALLADIUM GOLD	9	DUAL	125 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V	.01 mA		e4	30	260	7.8 mm	2509
CDCVF2509APWR	Texas Instruments	PLL BASED CLOCK DRIVER	OTHER	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS	TR	3.3	3.3	25 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25	3.9 ns	12 Amp	Clock Drivers	.65 mm	85 Cel	SERIES-RESISTOR	.1 ns	0 Cel	NICKEL PALLADIUM GOLD	9	DUAL	175 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V			e4	30	260	7.8 mm	2509
CDCVF2509APW	Texas Instruments	PLL BASED CLOCK DRIVER	OTHER	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS	TUBE	3.3	3.3	25 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25	3.9 ns	12 Amp	Clock Drivers	.65 mm	85 Cel	SERIES-RESISTOR	.1 ns	0 Cel	NICKEL PALLADIUM GOLD	9	DUAL	175 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V			e4	30	260	7.8 mm	2509
CDCVF2510APWR	Texas Instruments	PLL BASED CLOCK DRIVER	OTHER	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		TR	3.3	3.3	25 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25	3.9 ns	12 Amp	Clock Driver	.65 mm	85 Cel	SERIES-RESISTOR	.1 ns	0 Cel	NICKEL PALLADIUM GOLD	10	DUAL	175 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V			e4	30	260	7.8 mm	2510
CDCVF2510APW	Texas Instruments	PLL BASED CLOCK DRIVER	OTHER	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		TUBE	3.3	3.3	25 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25	3.9 ns	12 Amp	Clock Drivers	.65 mm	85 Cel	SERIES-RESISTOR	.1 ns	0 Cel	NICKEL PALLADIUM GOLD	10	DUAL	175 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V			e4	30	260	7.8 mm	2510
CDCVF2510APWRG4	Texas Instruments	PLL BASED CLOCK DRIVER	OTHER	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			3.3	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25	3.9 ns	12 Amp	Clock Drivers	.65 mm	85 Cel		.1 ns	0 Cel	NICKEL PALLADIUM GOLD	10	DUAL	175 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	3 V			e4	30	260	7.8 mm
MC100E210FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2	ECL		5	-4.5		CHIP CARRIER	LDCC28,.5SQ	.75 ns		Clock Drivers	1.27 mm	85 Cel		.075 ns	0 Cel	TIN	4	QUAD		S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	11.505 mm	100E
MC100H641FNG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL LATCHED	1	ECL		5	5		CHIP CARRIER	LDCC28,.5SQ	6.9 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel		.35 ns	0 Cel	TIN	9	QUAD	65 MHz	S-PQCC-J28		5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	100H
MC100H641FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL LATCHED	1	ECL		5	5		CHIP CARRIER	LDCC28,.5SQ	6.9 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel		.35 ns	0 Cel	TIN	9	QUAD	65 MHz	S-PQCC-J28		5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	100H
MC100H642FNG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5	5		CHIP CARRIER	LDCC28,.5SQ	5.75 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel		.5 ns	0 Cel	TIN	8	QUAD	100 MHz	S-PQCC-J28	3	5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	100H
MC100H642FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5	5		CHIP CARRIER	LDCC28,.5SQ	5.75 ns		Clock Drivers	1.27 mm	85 Cel		.5 ns	0 Cel	TIN	8	QUAD	100 MHz	S-PQCC-J28		5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	100H
MC100H646FNG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5	5		CHIP CARRIER	LDCC28,.5SQ	6.4 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.5 ns	0 Cel	TIN	8	QUAD		S-PQCC-J28	3	5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	100H
MC100H646FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5	5		CHIP CARRIER	LDCC28,.5SQ	6.4 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.5 ns	0 Cel	TIN	8	QUAD		S-PQCC-J28	3	5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	100H
MC10E211FNG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5	-5.2		CHIP CARRIER	LDCC28,.5SQ	1.125 ns		Clock Drivers	1.27 mm	85 Cel	OPEN-EMITTER	.075 ns	0 Cel	TIN	6	QUAD		S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	4.2 V		NECL MODE: VCC = 0 WITH VEE = -4.2V TO -5.7V	e3		260	11.505 mm	10E
MC10E411FNG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		5	-5.2		CHIP CARRIER	LDCC28,.5SQ	.68 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	0 Cel	TIN	9	QUAD		S-PQCC-J28		5.5 V	4.57 mm	11.505 mm	Not Qualified	4.5 V		NECL MODE: VCC = 0V WITH VEE = -4.5V TO -5.5V	e3		260	11.505 mm	10E
MC10H640FNG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5	5		CHIP CARRIER	LDCC28,.5SQ	6 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel		.5 ns	0 Cel	TIN	6	QUAD	135 MHz	S-PQCC-J28	3	5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	10H
MC10H641FNG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL LATCHED	1	ECL		5	5		CHIP CARRIER	LDCC28,.5SQ	6.9 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel		.35 ns	0 Cel	TIN	9	QUAD	65 MHz	S-PQCC-J28	3	5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	10H
MC10H641FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL LATCHED	1	ECL		5	5		CHIP CARRIER	LDCC28,.5SQ	6.9 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel		.35 ns	0 Cel	TIN	9	QUAD	65 MHz	S-PQCC-J28	3	5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	10H
MC10H642FNG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5	5		CHIP CARRIER	LDCC28,.5SQ	5.75 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel		.5 ns	0 Cel	TIN	8	QUAD	100 MHz	S-PQCC-J28		5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	10H
MC10H642FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5	5		CHIP CARRIER	LDCC28,.5SQ	5.75 ns		Clock Drivers	1.27 mm	85 Cel		.5 ns	0 Cel	TIN	8	QUAD	100 MHz	S-PQCC-J28	3	5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	10H

Clock Drivers & Buffers

Clock drivers and buffers are two electronic components commonly used in digital systems to control the timing and distribution of clock signals.

Clock drivers are electronic components that generate a clock signal and distribute it to multiple components or devices within a digital system. The clock signal is a periodic waveform that synchronizes the timing of different operations within the system. The clock driver typically amplifies and shapes the clock signal to ensure that it meets the timing requirements of the system.

Buffers, on the other hand, are electronic components that amplify and isolate signals. In digital systems, buffers are often used to distribute clock signals to multiple components without degrading the quality of the signal. Buffers can help to reduce signal distortion, noise, and jitter, which can be particularly important in high-speed digital systems.

Buffers can also be used to isolate signals and prevent interference between different components or devices. They can be particularly useful in situations where the output of one device or component could damage another device or component.

Clock drivers and buffers can be used together to distribute clock signals throughout a digital system while maintaining signal integrity. The clock driver generates the clock signal and distributes it to the buffers, which then amplify and isolate the signal before distributing it to the various components or devices within the system.