Clock Drivers & Buffers

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Input Conditioning	No. of Functions	Technology	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	No. of Inverted Outputs	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Maximum Same Edge Skew (tskwd)	Minimum Operating Temperature	Terminal Finish	No. of True Outputs	Terminal Position	Control Type	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
ISPPAC-CLK5410D-01SN64I	Lattice Semiconductor	PLL BASED CLOCK DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1	CMOS			3.3	3.3		0	CHIP CARRIER	LCC64,.35SQ,20		9 Amp	Clock Drivers	.5 mm	85 Cel	3-STATE	.01 ns	-40 Cel		4	QUAD		400 MHz	S-XQCC-N64		3.6 V	1 mm	9 mm	Not Qualified		3 V						9 mm	AC
CDC2582PAH	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	52	TQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	BICMOS			3.3	3.3		0	FLATPACK, THIN PROFILE	TQFP52,.47SQ		12 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns	0 Cel	NICKEL PALLADIUM GOLD	12	QUAD		100 MHz	S-PQFP-G52	4	3.6 V	1.2 mm	10 mm	Not Qualified		3 V			e4	30	260	10 mm	CDC
CY2305SI-1H	Cypress Semiconductor	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS			3.3	3.3		0	SMALL OUTLINE	SOP8,.25	8.7 ns		Clock Drivers	1.27 mm	85 Cel	3-STATE	.25 ns	-40 Cel	TIN LEAD	8	DUAL		133.33 MHz	R-PDSO-G8	1	3.6 V	1.727 mm	3.8985 mm	Not Qualified		3 V			e0		220	4.889 mm	2305
CY2305SI-1	Cypress Semiconductor	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS			3.3	3.3		0	SMALL OUTLINE	SOP8,.25	8.7 ns		Clock Drivers	1.27 mm	85 Cel	3-STATE	.25 ns	-40 Cel	TIN LEAD	4	DUAL		133.33 MHz	R-PDSO-G8	3	3.6 V	1.727 mm	3.8985 mm	Not Qualified		3 V			e0		220	4.889 mm	2305
MC100LVEP111FAR2	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL			2.5	-4.5		0	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.5 ns		Clock Drivers	.8 mm	85 Cel	OPEN-EMITTER	.025 ns	-40 Cel	TIN LEAD	10	QUAD			S-PQFP-G32		3.8 V	1.6 mm	7 mm	Not Qualified		2.375 V		NECL MODE OPERATING RANGE: VCC = 0V WITH VEE = -2.375V TO -3.8V	e0		235	7 mm	100LVE
MC100LVEP111FA	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL			2.5	-4.5		0	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.5 ns		Clock Drivers	.8 mm	85 Cel	OPEN-EMITTER	.025 ns	-40 Cel	TIN LEAD	10	QUAD			S-PQFP-G32		3.8 V	1.6 mm	7 mm	Not Qualified		2.375 V		NECL MODE OPERATING RANGE: VCC = 0V WITH VEE = -2.375V TO -3.8V	e0		235	7 mm	100LVE
MC100LVEP14DTR2	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL			2.5	-4.5		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	.475 ns		Clock Drivers	.65 mm	85 Cel	OPEN-EMITTER	.025 ns	-40 Cel	NICKEL PALLADIUM GOLD	5	DUAL		2000 MHz	R-PDSO-G20		3.8 V	1.2 mm	4.4 mm	Not Qualified		2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V	e4		260	6.5 mm	100LVE
MC100LVEP14DT	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL			2.5	-4.5		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	.475 ns		Clock Drivers	.65 mm	85 Cel	OPEN-EMITTER	.025 ns	-40 Cel	NICKEL PALLADIUM GOLD	5	DUAL		2000 MHz	R-PDSO-G20	1	3.8 V	1.2 mm	4.4 mm	Not Qualified		2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V	e4	30	260	6.5 mm	100LVE
CDC208DWR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS	4	TR	5	5	50 pF	0	SMALL OUTLINE	SOP20,.4	11.7 ns	24 Amp	Bus Driver/Transceivers	1.27 mm	85 Cel	3-STATE	1 ns	-40 Cel	NICKEL PALLADIUM GOLD	4	DUAL	ENABLE LOW	60 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	.08 mA		e4	30	260	12.8 mm	208
CDC328ADR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		TR	5	5		0	SMALL OUTLINE	SOP16,.25	5 ns	48 Amp	Clock Drivers	1.27 mm	85 Cel		1 ns	-40 Cel	NICKEL PALLADIUM GOLD	6	DUAL		100 MHz	R-PDSO-G16	1	5.25 V	1.75 mm	3.9 mm	Not Qualified		4.75 V		COMBINATIONS OF TRUE AND COMPLEMENTARY OUTPUTS POSSIBLE WITH POLARITY-CONTROL INPUTS	e4	30	260	9.9 mm	328
CDC328AD	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		TUBE	5	5		0	SMALL OUTLINE	SOP16,.25	5 ns	48 Amp	Clock Drivers	1.27 mm	85 Cel		1 ns	-40 Cel	NICKEL PALLADIUM GOLD	6	DUAL		100 MHz	R-PDSO-G16	1	5.25 V	1.75 mm	3.9 mm	Not Qualified		4.75 V		COMBINATIONS OF TRUE AND COMPLEMENTARY OUTPUTS POSSIBLE WITH POLARITY-CONTROL INPUTS	e4	30	260	9.9 mm	328
MC10LVEP11DTR2	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL			2.5	+-2.375/+-3.8		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.31 ns		Clock Drivers	.65 mm	85 Cel		.02 ns	-40 Cel	TIN LEAD	2	DUAL			S-PDSO-G8	1	3.8 V	1.1 mm	3 mm	Not Qualified		2.375 V		NECL MODE : VCC = 0V WITH VEE = -2.375V TO -3.8V	e0		235	3 mm	10LVE
CDC339DW	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		TUBE	5	5		0	SMALL OUTLINE	SOP20,.4	9 ns	48 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.9 ns	-40 Cel	NICKEL PALLADIUM GOLD	8	DUAL		80 MHz	R-PDSO-G20	1	5.25 V	2.65 mm	7.5 mm	Not Qualified		4.75 V	85 mA		e4	30	260	12.8 mm	CDC
870919BRI-01LFT	Integrated Device Technology	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	MUX	1	CMOS			3.3	3.3		0	SMALL OUTLINE	SSOP28,.25		24 Amp	Clock Drivers	.635 mm	85 Cel		.5 ns	-40 Cel	MATTE TIN	6	DUAL		160 MHz	R-PDSO-G28	1	3.6 V	1.75 mm	3.9 mm	Not Qualified		3 V			e3	30	260	9.9 mm	5V
870931ARI-01LFT	Integrated Device Technology	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1				3.3	3.3		0	SMALL OUTLINE	SSOP20,.25		24 Amp	Clock Drivers	.635 mm	85 Cel	3-STATE	.3 ns	-40 Cel	MATTE TIN	6	DUAL		80 MHz	R-PDSO-G28	1	3.6 V	1.75 mm	3.9 mm	Not Qualified		3 V			e3	30	260	8.65 mm	931
CDCLVC1108PW	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS		TUBE	2.5	3.3		0	SMALL OUTLINE	TSSOP16,.25	2.6 ns	12 Amp	Clock Driver	.65 mm	85 Cel		.05 ns	-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL		250 MHz	R-PDSO-G16	1	2.7 V	1.2 mm	4.4 mm	Not Qualified		2.3 V			e4	30	260	5 mm	CDC
CDCLVC1110PW	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS		TUBE	2.5	3.3		0	SMALL OUTLINE	TSSOP20,.25	2.6 ns	12 Amp	Clock Driver	.65 mm	85 Cel		.05 ns	-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL		250 MHz	R-PDSO-G20	1	2.7 V	1.2 mm	4.4 mm	Not Qualified		2.3 V			e4	30	260	6.5 mm	CDC
CDCLVC1112PW	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS		TUBE	2.5	3.3		0	SMALL OUTLINE	TSSOP24,.25	2.6 ns	12 Amp	Clock Driver	.65 mm	85 Cel		.05 ns	-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL		250 MHz	R-PDSO-G24	1	2.7 V	1.2 mm	4.4 mm	Not Qualified		2.3 V			e4	30	260	7.8 mm	CDC
CDCLVD2102RGTT	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2			TR	2.5	2.5		0	CHIP CARRIER	LCC16,.12SQ,20	2.5 ns		Clock Driver	.5 mm	85 Cel		.015 ns	-40 Cel	NICKEL PALLADIUM GOLD	1	QUAD		800 MHz	S-PQCC-N16	2	2.625 V	1 mm	3 mm	Not Qualified		2.375 V	106 mA		e4	30	260	3 mm	CDC
CDCLVD2104RHDT	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	28	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2			TR	2.5	2.5		0	CHIP CARRIER	LCC28,.2SQ,20	2.5 ns		Clock Drivers	.5 mm	85 Cel		.035 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	4	QUAD		800 MHz	S-PQCC-N28	2	2.625 V	1 mm	5 mm	Not Qualified		2.375 V			e4	NOT SPECIFIED	260	5 mm	CDC
CDC2351DWR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		TR	3.3	3.3	50 pF	0	SMALL OUTLINE	SOP24,.4	4.8 ns	12 Amp	Clock Drivers	1.27 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	10	DUAL		100 MHz	R-PDSO-G24	1	3.6 V	2.65 mm	7.5 mm	Not Qualified		3 V	15 mA		e4	NOT SPECIFIED	260	15.4 mm	2351
CDC2351QDBR	Texas Instruments	LOW SKEW CLOCK DRIVER	AUTOMOTIVE	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		TR	3.3	3.3	50 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP24,.3	11 ns	12 Amp	Clock Drivers	.65 mm	125 Cel	3-STATE WITH SERIES RESISTOR	2.5 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	10	DUAL		100 MHz	R-PDSO-G24	1	3.6 V	2 mm	5.3 mm	Not Qualified		3 V	15 mA		e4	NOT SPECIFIED	260	8.2 mm	2351
CDC351DWR	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		TR	3.3	3.3	50 pF	0	SMALL OUTLINE	SOP24,.4	4.2 ns	32 Amp	Clock Drivers	1.27 mm	70 Cel	3-STATE	.8 ns	0 Cel	NICKEL PALLADIUM GOLD	10	DUAL		100 MHz	R-PDSO-G24	1	3.6 V	2.65 mm	7.5 mm	Not Qualified		3 V	25 mA		e4	30	260	15.4 mm	351
CDCVF2505D	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			TUBE	3.3	3.3	25 pF	0	SMALL OUTLINE	SOP8,.25	.15 ns	12 Amp	Clock Driver	1.27 mm	85 Cel	3-STATE WITH SERIES RESISTOR	.15 ns	-40 Cel	NICKEL PALLADIUM GOLD	4	DUAL		200 MHz	R-PDSO-G8	1	3.6 V	1.75 mm	3.9 mm	Not Qualified		3 V			e4	30	260	4.9 mm	2505
CDC2510APWR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		12 Amp	Clock Drivers	.65 mm	70 Cel	SERIES-RESISTOR	.2 ns	0 Cel		10	DUAL		100 MHz	R-PDSO-G24		3.6 V	1.2 mm	4.4 mm	Not Qualified		3 V				NOT SPECIFIED	NOT SPECIFIED	7.8 mm	2510
MC10EP11DTR2	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL			3.3	-3.0/-5.5		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.3 ns		Clock Drivers	.65 mm	85 Cel		.12 ns	-40 Cel	TIN LEAD	2	DUAL			S-PDSO-G8	1	5.5 V	1.1 mm	3 mm	Not Qualified		3 V		NECL MODE: VCC=0 WITH VEE = -3.0V TO -5.5V	e0		235	3 mm	10EP
MC100EP139DTR2	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL			3.3	-3.0/-5.5/3.3/5.0		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	.9 ns		Clock Drivers	.65 mm	85 Cel		.1 ns	-40 Cel	NICKEL PALLADIUM GOLD	4	DUAL		1000 MHz	R-PDSO-G20		5.5 V	1.2 mm	4.4 mm	Not Qualified		3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e4		260	6.5 mm	100E
MC100EP809FAR2	Onsemi	LOW SKEW CLOCK DRIVER	COMMERCIAL EXTENDED	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL			3.3	1.8,3.3		0	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	1 ns		Clock Drivers	.8 mm	85 Cel	OPEN-EMITTER	.05 ns	0 Cel	TIN LEAD	9	QUAD		500 MHz	S-PQFP-G32		3.6 V	1.6 mm	7 mm	Not Qualified		3 V			e0		235	7 mm	100E
MC100EP809FA	Onsemi	LOW SKEW CLOCK DRIVER	COMMERCIAL EXTENDED	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL			3.3	1.8,3.3		0	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	1 ns		Clock Drivers	.8 mm	85 Cel	OPEN-EMITTER	.05 ns	0 Cel	TIN LEAD	9	QUAD		500 MHz	S-PQFP-G32	2	3.6 V	1.6 mm	7 mm	Not Qualified		3 V			e0		235	7 mm	100E
NB3N3020DTG	Onsemi	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				3.3			1	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					.65 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL			R-PDSO-G16	1	3.63 V	1.2 mm	4.4 mm	Not Qualified		2.97 V			e4	30	260	5 mm	3N
CDCVF25081DG4	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			TUBE	3.3	3.3	25 pF	0	SMALL OUTLINE	SOP16,.25	6 ns	12 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE WITH SERIES RESISTOR	.15 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	8	DUAL		200 MHz	R-PDSO-G16	1	3.6 V	1.75 mm	3.9 mm	Not Qualified		3 V			e4	NOT SPECIFIED	260	9.9 mm	25081
CDCV855IPWG4	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			TUBE	2.5	2.5	14 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	4.5 ns	12 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE	.05 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	4	DUAL		180 MHz	R-PDSO-G28	1	2.7 V	1.2 mm	4.4 mm	Not Qualified		2.3 V			e4	NOT SPECIFIED	260	9.7 mm	855
CDCV855PWG4	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			TUBE	2.5	2.5	14 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	4.5 ns	12 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE	.05 ns	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	4	DUAL		180 MHz	R-PDSO-G28	1	2.7 V	1.2 mm	4.4 mm	Not Qualified		2.3 V			e4	NOT SPECIFIED	260	9.7 mm	855
MC100H643FNG	Onsemi	LOW SKEW CLOCK DRIVER	COMMERCIAL EXTENDED	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL LATCHED	1	ECL			5	5,-4.5		0	CHIP CARRIER	LDCC28,.5SQ	5.5 ns	48 Amp	Clock Drivers	1.27 mm	85 Cel		.5 ns	0 Cel	TIN	8	QUAD			S-PQCC-J28		5.25 V	4.57 mm	11.505 mm	Not Qualified		4.75 V			e3		260	11.505 mm	100H
MC10H643FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	COMMERCIAL EXTENDED	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL LATCHED	1	ECL			5	5,-5.2		0	CHIP CARRIER	LDCC28,.5SQ	5.5 ns	48 Amp	Clock Drivers	1.27 mm	85 Cel		.5 ns	0 Cel	TIN	8	QUAD			S-PQCC-J28		5.25 V	4.57 mm	11.505 mm	Not Qualified		4.75 V			e3		260	11.505 mm	10H
NB100LVEP222FARG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	52	HLQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL			2.5	-2.5/-3.3/2.5/3.3		0	FLATPACK, HEAT SINK/SLUG, LOW PROFILE	QFP52,.47SQ	1 ns		Clock Drivers	.65 mm	85 Cel		.06 ns	-40 Cel	TIN	4	QUAD			S-PQFP-G52	3	3.8 V	1.7 mm	10 mm	Not Qualified		2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V	e3		260	10 mm	100LVE
CDC509PWRG4	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			TR	3.3	3.3	30 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		20 Amp	Clock Drivers	.65 mm	70 Cel		.2 ns	0 Cel	NICKEL PALLADIUM GOLD	9	DUAL		125 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified		3 V			e4	30	260	7.8 mm	509
SN0305042RTHR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			TR	3.3			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		2.6 ns	12 Amp		.5 mm	85 Cel	3-STATE	.03 ns	-40 Cel	NICKEL PALLADIUM GOLD	4	QUAD		800 MHz	S-PQCC-N24	2	3.6 V	1 mm	4 mm	Not Qualified		3 V		3 LVPECL DIFFERENTIAL CLOCK OUTPUTS AND SINGLE ENDED LVCMOS OUTPUT	e4	30	260	4 mm	1803
MC100EP139MNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	20	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1	ECL			3.3	-3.0/-5.5/3.3/5.0		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.16SQ,20	.9 ns		Clock Drivers	.5 mm	85 Cel		.1 ns	-40 Cel	TIN	4	QUAD			S-XQCC-N20	1	5.5 V	1 mm	4 mm	Not Qualified		3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3		260	4 mm	100E
NB3N2304NZMNR4G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	STANDARD	1				3.3	3.3		0	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20	5 ns	25 Amp	Clock Drivers	.5 mm	85 Cel		.1 ns	-40 Cel	NICKEL GOLD PALLADIUM	4	DUAL		140 MHz	S-XDSO-N8	1	3.6 V	1 mm	2 mm	Not Qualified		3 V				30	260	2 mm	3N
NB4L6254FAG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	BIPOLAR			2.5	2.5/3.3		0	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.485 ns		Clock Drivers	.8 mm	85 Cel	3-STATE	.05 ns	-40 Cel	TIN	6	QUAD		3000 MHz	S-PQFP-G32	2	3.465 V	1.6 mm	7 mm	Not Qualified		2.375 V			e3		260	7 mm	4L
NB4L6254FAR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	BIPOLAR			2.5	2.5/3.3		0	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.485 ns		Clock Drivers	.8 mm	85 Cel	3-STATE	.05 ns	-40 Cel	MATTE TIN	6	QUAD		3000 MHz	S-PQFP-G32	2	3.465 V	1.6 mm	7 mm	Not Qualified		2.375 V			e3	30	260	7 mm	4L
SN65LVELT23DGKR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	STANDARD	2			TR	3.3		20 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		2.5 ns	24 Amp		.65 mm	85 Cel		.18 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL		180 MHz	S-PDSO-G8	1	3.6 V	1.1 mm	3 mm	Not Qualified		3 V			e4	30	260	3 mm	65LVEL
CDCLVD110AVFR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			TR	2.5	2.5	5 pF	0	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	3 ns		Clock Driver	.8 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	10	QUAD		1100 MHz	S-PQFP-G32	1	2.625 V	1.6 mm	7 mm	Not Qualified		2.375 V	160 mA		e4	30	260	7 mm	110
CDCLVD110AVF	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			TRAY	2.5	2.5	5 pF	0	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	3 ns		Clock Driver	.8 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	10	QUAD		1100 MHz	S-PQFP-G32	1	2.625 V	1.6 mm	7 mm	Not Qualified		2.375 V	160 mA		e4	30	260	7 mm	110
NB6L11MMNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1				2.5	+-2.5/+-3.3		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	.325 ns		Clock Drivers	.5 mm	85 Cel		.015 ns	-40 Cel	NICKEL GOLD PALLADIUM	2	QUAD			S-XQCC-N16	1	3.63 V	1 mm	3 mm	Not Qualified		2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V		30	260	3 mm	6L
CDC351IDBG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		TUBE	3.3	3.3	50 pF	0	SMALL OUTLINE	SSOP24,.3	4.2 ns	32 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.9 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	10	DUAL		100 MHz	R-PDSO-G24	1	3.6 V	2.65 mm	7.5 mm	Not Qualified		3 V	25 mA		e4	NOT SPECIFIED	260	15.4 mm	351
CDC351IDWG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		TUBE	3.3	3.3	50 pF	0	SMALL OUTLINE	SOP24,.4	4.2 ns	32 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.9 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	10	DUAL		100 MHz	R-PDSO-G24	1	3.6 V	2.65 mm	7.5 mm	Not Qualified		3 V	25 mA		e4	NOT SPECIFIED	260	15.4 mm	351

Clock drivers and buffers are two electronic components commonly used in digital systems to control the timing and distribution of clock signals.

Clock drivers are electronic components that generate a clock signal and distribute it to multiple components or devices within a digital system. The clock signal is a periodic waveform that synchronizes the timing of different operations within the system. The clock driver typically amplifies and shapes the clock signal to ensure that it meets the timing requirements of the system.

Buffers, on the other hand, are electronic components that amplify and isolate signals. In digital systems, buffers are often used to distribute clock signals to multiple components without degrading the quality of the signal. Buffers can help to reduce signal distortion, noise, and jitter, which can be particularly important in high-speed digital systems.

Buffers can also be used to isolate signals and prevent interference between different components or devices. They can be particularly useful in situations where the output of one device or component could damage another device or component.

Clock drivers and buffers can be used together to distribute clock signals throughout a digital system while maintaining signal integrity. The clock driver generates the clock signal and distributes it to the buffers, which then amplify and isolate the signal before distributing it to the various components or devices within the system.