PARALLEL IN PARALLEL OUT Digital Shift Registers 64

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	No. of Bits	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
CD4035BMT	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	2000000 Hz	CMOS	4	5	5/15	SMALL OUTLINE	SOP16,.25	500 ns	Shift Registers	1.27 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	8 MHz	R-PDSO-G16	1	18 V	1.75 mm	3.9 mm	Not Qualified	CONFIGURABLE	3 V	J AND K BAR SERIAL INPUT	e4	30	260	9.9 mm	4000/14000/40000
MC100E141FNG	Onsemi	PARALLEL IN PARALLEL OUT	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	700000000 Hz	ECL	8	5	-4.5	CHIP CARRIER	LDCC28,.5SQ	.975 ns	Shift Registers	1.27 mm	85 Cel	BIDIRECTIONAL	OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN	QUAD	700 MHz	S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V; SIPO OPERATION ALSO AVAILABLE	e3		260	11.505 mm	100E
MC100EP142FAG	Onsemi	PARALLEL IN PARALLEL OUT	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL	9	3.3	+-3.3/+-5	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.8 ns	Shift Registers	.8 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD	3000 MHz	S-PQFP-G32	2	5.5 V	1.6 mm	7 mm	Not Qualified	TRUE	3 V	ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V; SIPO OPERATION ALSO AVAILABLE	e3	30	260	7 mm	100E
MC100EP142FAR2G	Onsemi	PARALLEL IN PARALLEL OUT	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL	9	3.3	+-3.3/+-5	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.8 ns	Shift Registers	.8 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN	QUAD	3000 MHz	S-PQFP-G32	2	5.5 V	1.6 mm	7 mm	Not Qualified	TRUE	3 V	ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V; SIPO OPERATION ALSO AVAILABLE	e3	30	260	7 mm	100E
MC10E142FNG	Onsemi	PARALLEL IN PARALLEL OUT	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	700000000 Hz	ECL	9	5	-5.2	CHIP CARRIER	LDCC28,.5SQ	1 ns	Shift Registers	1.27 mm	85 Cel	RIGHT	OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN	QUAD	700 MHz	S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V; SIPO OPERATION ALSO AVAILABLE	e3		260	11.505 mm	10E
MC10E142FNR2G	Onsemi	PARALLEL IN PARALLEL OUT	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	700000000 Hz	ECL	9	5	-5.2	CHIP CARRIER	LDCC28,.5SQ	1 ns	Shift Registers	1.27 mm	85 Cel	RIGHT	OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN	QUAD	700 MHz	S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V; SIPO OPERATION ALSO AVAILABLE	e3		260	11.505 mm	10E
MC10EP142FAG	Onsemi	PARALLEL IN PARALLEL OUT	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL	9	3.3	+-3.3/+-5	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.8 ns	Shift Registers	.8 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN	QUAD	3000 MHz	S-PQFP-G32	2	5.5 V	1.6 mm	7 mm	Not Qualified	TRUE	3 V	ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V; SIPO OPERATION ALSO AVAILABLE	e3		260	7 mm	10E
MC10EP142FAR2G	Onsemi	PARALLEL IN PARALLEL OUT	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL	9	3.3	+-3.3/+-5	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.8 ns	Shift Registers	.8 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN	QUAD	3000 MHz	S-PQFP-G32	2	5.5 V	1.6 mm	7 mm	Not Qualified	TRUE	3 V	ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V; SIPO OPERATION ALSO AVAILABLE	e3		260	7 mm	10E
MC10H141FNG	Onsemi	PARALLEL IN PARALLEL OUT	COMMERCIAL EXTENDED	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	250000000 Hz	ECL	4			CHIP CARRIER	LDCC20,.4SQ	2 ns	Shift Registers	1.27 mm	75 Cel	BIDIRECTIONAL		POSITIVE EDGE	0 Cel	TIN	QUAD	250 MHz	S-PQCC-J20			4.57 mm	8.965 mm	Not Qualified	TRUE			e3		260	8.965 mm	10H
MC10H141FNR2G	Onsemi	PARALLEL IN PARALLEL OUT	COMMERCIAL EXTENDED	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	250000000 Hz	ECL	4			CHIP CARRIER	LDCC20,.4SQ	2 ns	Shift Registers	1.27 mm	75 Cel	BIDIRECTIONAL		POSITIVE EDGE	0 Cel	TIN	QUAD	250 MHz	S-PQCC-J20	3		4.57 mm	8.965 mm	Not Qualified	TRUE			e3	30	260	8.965 mm	10H
CD4034BM96E4	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	2000000 Hz	CMOS	8	5	5/15	SMALL OUTLINE	SOP24,.4	700 ns	Shift Registers	1.27 mm	125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-55 Cel		DUAL	7 MHz	R-PDSO-G24		18 V	2.65 mm	7.5 mm	Not Qualified	TRUE	3 V	COMMON I/O PINS, SERIAL INPUT-PARALLEL OUTPUT AND SERIAL INPUT-SERIAL OUTPUT OPERATION AVAILABLE		NOT SPECIFIED	NOT SPECIFIED	15.4 mm	4000/14000/40000
CD4035BPWE4	Texas Instruments	PARALLEL IN PARALLEL OUT	MILITARY	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	2000000 Hz	CMOS	4	5	5/15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	500 ns	Shift Registers	.65 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-55 Cel		DUAL	8 MHz	R-PDSO-G16		18 V	1.2 mm	4.4 mm	Not Qualified	CONFIGURABLE	3 V	J AND K BAR SERIAL INPUT		NOT SPECIFIED	NOT SPECIFIED	5 mm	4000/14000/40000
MC100E142FNG	Onsemi	PARALLEL IN PARALLEL OUT	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	700000000 Hz	ECL	9	5	-4.5	CHIP CARRIER	LDCC28,.5SQ	1 ns	Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	0 Cel	TIN	QUAD	700 MHz	S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V; SIPO OPERATION ALSO AVAILABLE	e3		260	11.505 mm	100E
MC100E142FNR2G	Onsemi	PARALLEL IN PARALLEL OUT	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	700000000 Hz	ECL	9	5	-4.5	CHIP CARRIER	LDCC28,.5SQ	1 ns	Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	0 Cel	TIN	QUAD	700 MHz	S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V; SIPO OPERATION ALSO AVAILABLE	e3		260	11.505 mm	100E
MC100EP142MNR4G	Onsemi	PARALLEL IN PARALLEL OUT	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL	9	3.3	+-3.3/+-5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	.8 ns	Shift Registers	.5 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN	QUAD		S-PQCC-N32	1	5.5 V	1 mm	5 mm	Not Qualified	TRUE	3 V	ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V; SIPO OPERATION ALSO AVAILABLE	e3	30	260	5 mm	100E
MC10EP142MNG	Onsemi	PARALLEL IN PARALLEL OUT	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL	9	3.3	+-3.3/+-5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	.8 ns	Shift Registers	.5 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN	QUAD		S-PQCC-N32	1	5.5 V	1 mm	5 mm	Not Qualified	TRUE	3 V	ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V; SIPO OPERATION ALSO AVAILABLE	e3	30	260	5 mm	10E

Digital Shift Registers

Digital shift registers are electronic circuits that can store and shift data in a serial-in, serial-out (SISO) or parallel-in, serial-out (PISO) fashion. They are commonly used in digital systems for data storage, data transfer, and signal processing applications.

Shift registers can be designed using various types of flip-flops, such as D flip-flops, JK flip-flops, and T flip-flops. They can also be designed using various technologies, including transistor-transistor logic (TTL), complementary metal-oxide-semiconductor (CMOS), and field-programmable gate arrays (FPGAs).

Digital shift registers can be classified into various types based on their operation mode and the direction of data shift. The most common types of shift registers include:

1. Serial-in, serial-out (SISO) shift registers: These shift registers have one serial input and one serial output. They can shift data in one direction, either left or right, and can be used for data storage, delay generation, and signal processing applications.

2. Parallel-in, serial-out (PISO) shift registers: These shift registers have multiple parallel inputs and one serial output. They can shift data from multiple inputs to a single output in a serial fashion and can be used for data transfer and signal processing applications.

3. Serial-in, parallel-out (SIPO) shift registers: These shift registers have one serial input and multiple parallel outputs. They can shift data from a single input to multiple outputs in a parallel fashion and can be used for data storage and signal processing applications.

4. Parallel-in, parallel-out (PIPO) shift registers: These shift registers have multiple parallel inputs and multiple parallel outputs. They can shift data from multiple inputs to multiple outputs in a parallel fashion and can be used for data transfer and signal processing applications.

Digital shift registers are used in various applications, including serial-to-parallel conversion, parallel-to-serial conversion, data storage, data transfer, and signal processing. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.