RECTANGULAR Digital Shift Registers 311

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Schmitt Trigger	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SN74LV594ADE4	Texas Instruments	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1		CMOS		8	TUBE	2.5	3.3	50 pF	SMALL OUTLINE	SOP16,.25	18.6 ns	12 Amp	Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	115 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V	.02 mA	PARALLEL OUTPUT IS REGISTERED	e4	NOT SPECIFIED	260	9.9 mm	LV/LV-A/LVX/H
SN74LV594ANSRE4	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	50000000 Hz	CMOS		8		2.5	3.3		SMALL OUTLINE	SOP16,.3	18.6 ns		Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	115 MHz	R-PDSO-G16		5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V		PARALLEL OUTPUT IS REGISTERED		NOT SPECIFIED	NOT SPECIFIED	10.2 mm	LV/LV-A/LVX/H
SN74LV594APWRE4	Texas Instruments	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	30000000 Hz	CMOS		8	TR	2.5	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	18.6 ns	12 Amp	Shift Registers	.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	115 MHz	R-PDSO-G16	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V	.02 mA	PARALLEL OUTPUT IS REGISTERED	e4	NOT SPECIFIED	260	5 mm	LV/LV-A/LVX/H
SN74LV594APWRG4	Texas Instruments	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1		CMOS		8	TR, 13 INCH	2.5	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	18.6 ns	12 Amp	Shift Registers	.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	115 MHz	R-PDSO-G16	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V	.02 mA	PARALLEL OUTPUT IS REGISTERED	e4	NOT SPECIFIED	260	5 mm	LV/LV-A/LVX/H
SN74LV594APWTG4	Texas Instruments	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1		CMOS		8	TR	2.5	2.5/5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	18.6 ns	12 Amp	Shift Registers	.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	85 MHz	R-PDSO-G16	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V	.02 mA	PARALLEL OUTPUT IS REGISTERED	e4	NOT SPECIFIED	260	5 mm	LV/LV-A/LVX/H
SN74LV595ADBRE4	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	50000000 Hz	CMOS		8		2.5	3.3		SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	25.5 ns		Shift Registers	.65 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	45 MHz	R-PDSO-G16		5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V		PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT		NOT SPECIFIED	NOT SPECIFIED	6.2 mm	LV/LV-A/LVX/H
SN74LV595APWRG4	Texas Instruments	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	40000000 Hz	CMOS		8	TR, 13 INCH	2.5	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	25.5 ns	16 Amp	Shift Register	.65 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	45 MHz	R-PDSO-G16	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V	.02 mA	PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT	e4	NOT SPECIFIED	260	5 mm	LV/LV-A/LVX/H
SN74HC595NE4	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	NO	1	25000000 Hz	CMOS		8	TUBE	5	2/6	150 pF	IN-LINE	DIP16,.3	250 ns	7.8 Amp	Shift Registers	2.54 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	29 MHz	R-PDIP-T16		6 V	5.08 mm	7.62 mm	Not Qualified	TRUE	2 V	.08 mA	PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT	e4	NOT SPECIFIED	NOT SPECIFIED	19.305 mm	HC/UH
SN74HC595PWRE4	Texas Instruments	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	25000000 Hz	CMOS		8	TR	5	2/6	150 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	250 ns	7.8 Amp	Shift Registers	.65 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	29 MHz	R-PDSO-G16	1	6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V	.08 mA	PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT	e4	30	260	5 mm	HC
CD74HC595MT	Texas Instruments	SERIAL IN PARALLEL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	25000000 Hz	CMOS		8	TR	5	2/6	50 pF	SMALL OUTLINE	SOP16,.25	300 ns	7.8 Amp	Shift Registers	1.27 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V	.16 mA		e4	30	260	9.9 mm	HC
SN74HC165QDREP	Texas Instruments	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	25000000 Hz	CMOS		8		5	2/6		SMALL OUTLINE	SOP16,.25	225 ns		Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	25 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V		CLOCK INHIBIT	e4	30	260	9.9 mm	HC/UH
SN74HC166AIDREP	Texas Instruments	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	25000000 Hz	CMOS		8	TR	5	2/6	50 pF	SMALL OUTLINE	SOP16,.25	190 ns	4 Amp	Shift Register	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	29 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V	.08 mA	SISO OPERATION ALSO AVAILABLE	e4	30	260	9.9 mm	HC
SN74HC166AIPWRQ1	Texas Instruments	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	25000000 Hz	CMOS	AEC-Q100	8		5	2/6		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	190 ns		Shift Registers	.65 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	29 MHz	R-PDSO-G16		6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V		CLOCK INHIBIT		NOT SPECIFIED	NOT SPECIFIED	5 mm	HC/UH
TPIC6A595DWG4	Texas Instruments	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1				8	TUBE	5		30 pF	SMALL OUTLINE					1.27 mm	125 Cel	RIGHT	OPEN-DRAIN	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G24	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	5 mA	PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT	e4	30	260	15.4 mm	6A
TPIC6A595DWRG4	Texas Instruments	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1				8	TR	5		30 pF	SMALL OUTLINE					1.27 mm	125 Cel	RIGHT	OPEN-DRAIN	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G24	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	5 mA	PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT	e4	30	260	15.4 mm	6A
TPIC6A596DWG4	Texas Instruments	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	10000000 Hz			8	TUBE	5		30 pF	SMALL OUTLINE				Shift Register	1.27 mm	125 Cel	RIGHT	OPEN-DRAIN	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	10 MHz	R-PDSO-G24	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	5 mA	PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT	e4	30	260	15.4 mm	6A
CD4094BEE4	Texas Instruments	SERIAL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	NO	1	1250000 Hz	CMOS		8	TUBE	5	5/15	50 pF	IN-LINE	DIP16,.3	840 ns	4.2 Amp	Shift Register	2.54 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-55 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	3 MHz	R-PDIP-T16		18 V	5.08 mm	7.62 mm	Not Qualified	TRUE	3 V	3 mA	COMPLIMENTARY SERIAL OUTPUT ALSO AVAILABLE	e4	NOT SPECIFIED	NOT SPECIFIED	19.305 mm	4000/14000/40000
CD74HCT4094EE4	Texas Instruments	SERIAL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	NO	1	20000000 Hz	CMOS		8	TUBE	5	5	50 pF	IN-LINE	DIP16,.3	43 ns	4 Amp	Shift Registers	2.54 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDIP-T16		5.5 V	5.08 mm	6.35 mm	Not Qualified	TRUE	4.5 V	.16 mA	PARALLEL OUTPUT IS LATCHED; SERIAL OUTPUT LATCHED WITH SHIFT CLOCK ALSO AVAILABLE	e4			19.3 mm	HCT
SN74LS165ANE4	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	NO	1	25000000 Hz	TTL		8	TUBE	5	5	15 pF	IN-LINE	DIP16,.3	25 ns	8 Amp	Shift Registers	2.54 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	25 MHz	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.75 V	30 mA	SISO OPERATION ALSO AVAILABLE	e4	NOT SPECIFIED	NOT SPECIFIED	19.305 mm	LS
CD4015BEE4	Texas Instruments	SERIAL IN PARALLEL OUT	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	NO	2	3000000 Hz	CMOS		4	TUBE	5	5/15	50 pF	IN-LINE	DIP16,.3	320 ns	4.2 Amp	Shift Registers	2.54 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	8.5 MHz	R-PDIP-T16		18 V	5.08 mm	7.62 mm	Not Qualified	TRUE	3 V	3 mA	INDIVIDUAL CLOCK & CLEAR FOR EACH SHIFT REGISTER	e4			19.305 mm	4000/14000/40000
NLV74VHC595DTR2G	Onsemi	SERIAL IN PARALLEL OUT	MILITARY	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS	AEC-Q100	8	TR	5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		16.5 ns			.65 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-55 Cel		DUAL	135 MHz	R-PDSO-G16		5.5 V	1.2 mm	4.4 mm		TRUE	2 V				NOT SPECIFIED	NOT SPECIFIED	5 mm	AHC/VHC/H/U/V
TC74HC595AF(EL,F)	Toshiba	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	25000000 Hz	CMOS		8		5	2/6		SMALL OUTLINE	SOP16,.3	155 ns		Shift Registers	1.27 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	28 MHz	R-PDSO-G16		6 V	1.9 mm	5.3 mm	Not Qualified	TRUE	2 V						10.3 mm	HC/UH
HEF4021BT-Q100,118	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS	AEC-Q100	8		5			SMALL OUTLINE		250 ns			1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDSO-G16		15 V	1.75 mm	3.9 mm		TRUE	3 V						9.9 mm	4000/14000/40000

Digital Shift Registers

Digital shift registers are electronic circuits that can store and shift data in a serial-in, serial-out (SISO) or parallel-in, serial-out (PISO) fashion. They are commonly used in digital systems for data storage, data transfer, and signal processing applications.

Shift registers can be designed using various types of flip-flops, such as D flip-flops, JK flip-flops, and T flip-flops. They can also be designed using various technologies, including transistor-transistor logic (TTL), complementary metal-oxide-semiconductor (CMOS), and field-programmable gate arrays (FPGAs).

Digital shift registers can be classified into various types based on their operation mode and the direction of data shift. The most common types of shift registers include:

1. Serial-in, serial-out (SISO) shift registers: These shift registers have one serial input and one serial output. They can shift data in one direction, either left or right, and can be used for data storage, delay generation, and signal processing applications.

2. Parallel-in, serial-out (PISO) shift registers: These shift registers have multiple parallel inputs and one serial output. They can shift data from multiple inputs to a single output in a serial fashion and can be used for data transfer and signal processing applications.

3. Serial-in, parallel-out (SIPO) shift registers: These shift registers have one serial input and multiple parallel outputs. They can shift data from a single input to multiple outputs in a parallel fashion and can be used for data storage and signal processing applications.

4. Parallel-in, parallel-out (PIPO) shift registers: These shift registers have multiple parallel inputs and multiple parallel outputs. They can shift data from multiple inputs to multiple outputs in a parallel fashion and can be used for data transfer and signal processing applications.

Digital shift registers are used in various applications, including serial-to-parallel conversion, parallel-to-serial conversion, data storage, data transfer, and signal processing. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.