COMMERCIAL Latches & Flip-Flops 81

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Schmitt Trigger	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	No. of Inputs	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Trigger Type	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SN74ALS29842NT	Texas Instruments	D LATCH	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		10		5	5		IN-LINE	DIP24,.3		48 Amp	FF/Latches	2.54 mm	70 Cel	3-STATE			DUAL		R-PDIP-T24					Not Qualified			85 mA
SN74LS604DW	Texas Instruments	JBAR-KBAR FLIP-FLOP	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	8		TTL							SMALL OUTLINE	SOP28,.4			FF/Latches	1.27 mm	70 Cel	3-STATE	POSITIVE EDGE		DUAL		R-PDSO-G28					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74F377ADW	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	110000000 Hz	TTL		8	TUBE	5	5	50 pF	SMALL OUTLINE	SOP20,.4	10.5 ns	20 Amp	FF/Latch	1.27 mm	70 Cel		POSITIVE EDGE	NICKEL PALLADIUM GOLD	DUAL	110 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	90 mA	WITH HOLD MODE	e4	30	260	12.8 mm	F/FAST
SN74ALS259D	Texas Instruments	D LATCH	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1		TTL		8	TUBE	5	5	50 pF	SMALL OUTLINE	SOP16,.25	13 ns	8 Amp	FF/Latch	1.27 mm	70 Cel		LOW LEVEL	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V	22 mA	1:8 DMUX FOLLOWED BY LATCH; RESET ACTIVE ONLY WHEN LATCH ENABLE IS HIGH	e4	30	260	9.9 mm	ALS
SN74AS74AN	Texas Instruments	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	2	105000000 Hz	TTL		1	TUBE	5	5	50 pF	IN-LINE	DIP14,.3	9 ns	20 Amp	FF/Latches	2.54 mm	70 Cel		POSITIVE EDGE	NICKEL PALLADIUM GOLD	DUAL	105 MHz	R-PDIP-T14		5.5 V	5.08 mm	6.35 mm	Not Qualified	COMPLEMENTARY	4.5 V	16 mA		e4			19.3 mm	AS
SN74F377ADWR	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	110000000 Hz	TTL		8	TR	5	5	50 pF	SMALL OUTLINE	SOP20,.4	10.5 ns	20 Amp	FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	NICKEL PALLADIUM GOLD	DUAL	110 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	90 mA	WITH HOLD MODE	e4	30	260	12.8 mm	F/FAST
SN74LS399N3	Texas Instruments	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	2	4		5	5	15 pF	IN-LINE	DIP16,.3	32 ns		Multiplexer/Demultiplexers	2.54 mm	70 Cel		POSITIVE EDGE		DUAL		R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	13 mA	FOUR 2:1 MUX FOLLOWED BY REGISTER		NOT SPECIFIED	NOT SPECIFIED	19.305 mm	LS
SN74174N-10	Texas Instruments	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		6		5		15 pF	IN-LINE		35 ns			2.54 mm	70 Cel		POSITIVE EDGE		DUAL	25 MHz	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	65 mA					19.305 mm	TTL/H/L
SN74AS533FN	Texas Instruments	D LATCH	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES	1		TTL		8		5	5		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel	3-STATE			QUAD		S-PQCC-J20					Not Qualified
SN74LS76AN3	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	2		TTL		2		5	5		IN-LINE	DIP16,.3	20 ns		FF/Latches	2.54 mm	70 Cel		NEGATIVE EDGE		DUAL	45 MHz	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.75 V		MASTER SLAVE OPERATION		NOT SPECIFIED	NOT SPECIFIED	19.305 mm	LS
SN74LS76ADR	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2		TTL		2	TR	5	5	15 pF	SMALL OUTLINE	SOP16,.25	20 ns		FF/Latches	1.27 mm	70 Cel		NEGATIVE EDGE		DUAL	45 MHz	R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.75 V	6 mA	MASTER SLAVE OPERATION		NOT SPECIFIED	NOT SPECIFIED	9.9 mm	LS
SN74LS173ADR	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	25000000 Hz	TTL		4	TR	5	5	45 pF	SMALL OUTLINE	SOP16,.25	35 ns	24 Amp	FF/Latches	1.27 mm	70 Cel	3-STATE	POSITIVE EDGE		DUAL	30 MHz	R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	24 mA	WITH HOLD MODE; WITH DUAL OUTPUT ENABLE; DISABLE TIME CL = 5PF		NOT SPECIFIED	NOT SPECIFIED	9.9 mm	LS
SN74LS377NS	Motorola	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		8		5	5		IN-LINE	DIP20,.3	27 ns		FF/Latches	2.54 mm	70 Cel		POSITIVE EDGE	TIN LEAD	DUAL	40 MHz	R-PDIP-T20		5.25 V	4.19 mm	7.62 mm	Not Qualified	TRUE	4.75 V		WITH HOLD MODE	e0			26.415 mm	LS
SN74LS74ANS	Motorola	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	2		TTL		1		5	5		IN-LINE	DIP14,.3	40 ns		FF/Latches	2.54 mm	70 Cel		POSITIVE EDGE	TIN LEAD	DUAL	33 MHz	R-PDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.75 V			e0			18.86 mm	LS
SN74ALS990N	Texas Instruments	D LATCH	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		8	TUBE	5	5	50 pF	IN-LINE	DIP20,.3	26 ns	24 Amp	FF/Latches	2.54 mm	70 Cel	3-STATE	HIGH LEVEL	NICKEL PALLADIUM GOLD	DUAL		R-PDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	70 mA	WITH READ-BACK	e4			24.325 mm	ALS
SN74ALS990DWR	Texas Instruments	D LATCH	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		8	TR	5	5	50 pF	SMALL OUTLINE	SOP20,.4	26 ns	24 Amp	FF/Latches	1.27 mm	70 Cel	3-STATE	HIGH LEVEL	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	70 mA	WITH READ-BACK	e4	30	260	12.8 mm	ALS
SN74ALS990DW	Texas Instruments	D LATCH	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		8	TUBE	5	5	50 pF	SMALL OUTLINE	SOP20,.4	26 ns	24 Amp	FF/Latches	1.27 mm	70 Cel	3-STATE	HIGH LEVEL	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	70 mA	WITH READ-BACK	e4	30	260	12.8 mm	ALS
SN74ALS994NT	Texas Instruments	D LATCH	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		10	TUBE	5	5	50 pF	IN-LINE	DIP24,.3	27 ns		FF/Latches	2.54 mm	70 Cel	3-STATE	HIGH LEVEL	NICKEL PALLADIUM GOLD	DUAL		R-PDIP-T24		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	82 mA	WITH READ-BACK	e4			31.64 mm	ALS
SN74AS175AD	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		4		5	5	50 pF	SMALL OUTLINE	SOP16,.25	10 ns		FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE		DUAL	100 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V	34 mA			NOT SPECIFIED	NOT SPECIFIED	9.9 mm	AS
SN74ALS175DR	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	50000000 Hz	TTL		4	TR	5	5	50 pF	SMALL OUTLINE	SOP16,.25	17 ns	8 Amp	FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	NICKEL PALLADIUM GOLD	DUAL	50 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.91 mm	Not Qualified	COMPLEMENTARY	4.5 V	14 mA		e4	30	260	9.9 mm	ALS
SN74AS174DR	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		6	TR	5		50 pF	SMALL OUTLINE	SOP16,.25	10 ns		FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE		DUAL	100 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V	45 mA			NOT SPECIFIED	NOT SPECIFIED	9.9 mm	AS
SN74ALS174NSR	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	50000000 Hz	TTL		6	TR	5	5	50 pF	SMALL OUTLINE	SOP16,.3	17 ns	8 Amp	FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	NICKEL PALLADIUM GOLD	DUAL	50 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V	19 mA		e4	30	260	10.3 mm	ALS
SN74ALS109ADG4	Texas Instruments	J-KBAR FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	2	34000000 Hz	TTL		2	TUBE	5	5	50 pF	SMALL OUTLINE	SOP16,.25	18 ns	8 Amp	FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	NICKEL PALLADIUM GOLD	DUAL	34 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.91 mm	Not Qualified	COMPLEMENTARY	4.5 V	4 mA		e4	30	260	9.9 mm	ALS
SN74AS109ADRG4	Texas Instruments	J-KBAR FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2		TTL		2	TR	5			SMALL OUTLINE	SOP16,.25	9 ns		FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE		DUAL	105 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V				NOT SPECIFIED	NOT SPECIFIED	9.9 mm	AS
SN74AS174DRG4	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		6	TR	5			SMALL OUTLINE	SOP16,.25	10 ns		FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE		DUAL	100 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V				NOT SPECIFIED	NOT SPECIFIED	9.9 mm	AS
SN74AS175BDRG4	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		4	TR	5	5		SMALL OUTLINE	SOP16,.25	10 ns		FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE		DUAL	100 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V				NOT SPECIFIED	NOT SPECIFIED	9.9 mm	AS
SN74F109DG4	Texas Instruments	J-KBAR FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	90000000 Hz	TTL		2	TUBE	5	5		SMALL OUTLINE	SOP16,.25	9.2 ns	20 Amp	FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	NICKEL PALLADIUM GOLD	DUAL	90 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V	17 mA		e4	30	260	9.9 mm	F/FAST
SN74LS107ADRG4	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	30000000 Hz	TTL		2	TR	5	5		SMALL OUTLINE	SOP14,.25	20 ns	8 Amp	FF/Latches	1.27 mm	70 Cel		NEGATIVE EDGE		DUAL	30 MHz	R-PDSO-G14		5.25 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.75 V	6 mA			NOT SPECIFIED	NOT SPECIFIED	8.65 mm	LS
SN74LS173ADRG4	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	25000000 Hz	TTL		4	TR	5	5		SMALL OUTLINE	SOP16,.25	35 ns	24 Amp	FF/Latches	1.27 mm	70 Cel	3-STATE	POSITIVE EDGE		DUAL	30 MHz	R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	24 mA	WITH HOLD MODE; WITH DUAL OUTPUT ENABLE; DISABLE TIME CL = 5PF		NOT SPECIFIED	NOT SPECIFIED	9.9 mm	LS
SSTU32866EC/G,551	NXP Semiconductors	D FLIP-FLOP	COMMERCIAL	BALL	96	LFBGA	RECTANGULAR	PLASTIC/EPOXY		YES	1				25		1.8			GRID ARRAY, LOW PROFILE, FINE PITCH		1.8 ns			.8 mm	70 Cel	OPEN-DRAIN	POSITIVE EDGE		BOTTOM	450 MHz	R-PBGA-B96	2	1.9 V	1.5 mm	5.5 mm	Not Qualified	TRUE	1.7 V		14 BIT 1:2 CONFIGURATION ALSO POSSIBLE				13.5 mm	SSTU
SSTUA32866EC/G,518	NXP Semiconductors	D FLIP-FLOP	COMMERCIAL	BALL	96	LFBGA	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		14		1.8			GRID ARRAY, LOW PROFILE, FINE PITCH		1.8 ns			.8 mm	70 Cel	OPEN-DRAIN	POSITIVE EDGE		BOTTOM	450 MHz	R-PBGA-B96	2	2 V	1.5 mm	5.5 mm	Not Qualified	COMPLEMENTARY	1.7 V						13.5 mm	32866
SSTUB32868ET/G,518	NXP Semiconductors	D FLIP-FLOP	COMMERCIAL	BALL	176	TFBGA	RECTANGULAR	PLASTIC/EPOXY		YES	1				28		1.8			GRID ARRAY, THIN PROFILE, FINE PITCH		3 ns			.65 mm	70 Cel		POSITIVE EDGE		BOTTOM	450 MHz	R-PBGA-B176		2 V	1.15 mm	6 mm	Not Qualified	TRUE	1.7 V						15 mm	32868
SSTUG32866EC/G,518	NXP Semiconductors	D FLIP-FLOP	COMMERCIAL	BALL	96	LFBGA	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		25		1.8			GRID ARRAY, LOW PROFILE, FINE PITCH		1.5 ns			.8 mm	70 Cel	OPEN-DRAIN	POSITIVE EDGE		BOTTOM	550 MHz	R-PBGA-B96	2	2 V	1.5 mm	5.5 mm	Not Qualified	COMPLEMENTARY	1.7 V						13.5 mm	32866
SSTUG32868ET/G,518	NXP Semiconductors	D FLIP-FLOP	COMMERCIAL	BALL	176	TFBGA	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		28		1.8			GRID ARRAY, THIN PROFILE, FINE PITCH		1.5 ns			.65 mm	70 Cel	OPEN-DRAIN	POSITIVE EDGE		BOTTOM	450 MHz	R-PBGA-B176	2	2 V	1.15 mm	6 mm	Not Qualified	COMPLEMENTARY	1.7 V						15 mm	32868
SSTUH32866EC/G,518	NXP Semiconductors	D FLIP-FLOP	COMMERCIAL	BALL	96	LFBGA	RECTANGULAR	PLASTIC/EPOXY		YES	1				25		1.8			GRID ARRAY, LOW PROFILE, FINE PITCH		1.8 ns			.8 mm	70 Cel		POSITIVE EDGE		BOTTOM	450 MHz	R-PBGA-B96	2	1.9 V	1.5 mm	5.5 mm	Not Qualified	TRUE	1.7 V						13.5 mm	SSTU
SSTUH32866EC/G,551	NXP Semiconductors	D FLIP-FLOP	COMMERCIAL	BALL	96	LFBGA	RECTANGULAR	PLASTIC/EPOXY		YES	1				25		1.8			GRID ARRAY, LOW PROFILE, FINE PITCH		1.8 ns			.8 mm	70 Cel		POSITIVE EDGE		BOTTOM	450 MHz	R-PBGA-B96	2	1.9 V	1.5 mm	5.5 mm	Not Qualified	TRUE	1.7 V						13.5 mm	SSTU
SSTUP32866EC/G,518	NXP Semiconductors	D FLIP-FLOP	COMMERCIAL	BALL	96	LFBGA	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		25		1.8			GRID ARRAY, LOW PROFILE, FINE PITCH		1.8 ns			.8 mm	70 Cel	OPEN-DRAIN	POSITIVE EDGE		BOTTOM	450 MHz	R-PBGA-B96	2	2 V	1.5 mm	5.5 mm	Not Qualified	COMPLEMENTARY	1.7 V						13.5 mm	32866
SN74F112NSRG4	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	2	100000000 Hz	TTL		2	TR	5	5	50 pF	SMALL OUTLINE	SOP16,.3	7.5 ns	20 Amp	FF/Latches	1.27 mm	70 Cel		NEGATIVE EDGE	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	100 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	4.5 V	19 mA		e4	NOT SPECIFIED	260	10.2 mm	F/FAST
SN74LS173ANSRG4	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	25000000 Hz	TTL		4	TR	5	5		SMALL OUTLINE	SOP16,.3	35 ns	24 Amp	FF/Latches	1.27 mm	70 Cel	3-STATE	POSITIVE EDGE		DUAL	30 MHz	R-PDSO-G16		5.25 V	2 mm	5.3 mm	Not Qualified	TRUE	4.75 V	24 mA			NOT SPECIFIED	NOT SPECIFIED	10.2 mm	LS
HSTL16918DGG,512	NXP Semiconductors	D LATCH	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1				9		3.3	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	5.2 ns		FF/Latches	.5 mm	70 Cel		LOW LEVEL	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G48	1	3.45 V	1.2 mm	6.1 mm	Not Qualified	TRUE	3.15 V			e4		260	12.5 mm	HSTL
N74F112D,602	NXP Semiconductors	J-K FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	80000000 Hz	TTL		2		5	5	50 pF	SMALL OUTLINE	SOP16,.25	7.5 ns	20 Amp	FF/Latches	1.27 mm	70 Cel		NEGATIVE EDGE	NICKEL PALLADIUM GOLD	DUAL	80 MHz	R-PDSO-G16	1	5.5 V			Not Qualified	COMPLEMENTARY	4.5 V	21 mA		e4				F/FAST
N74F112D,623	NXP Semiconductors	J-K FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	80000000 Hz	TTL		2	TR	5	5	50 pF	SMALL OUTLINE	SOP16,.25	7.5 ns	20 Amp	FF/Latches	1.27 mm	70 Cel		NEGATIVE EDGE	NICKEL PALLADIUM GOLD	DUAL	80 MHz	R-PDSO-G16	1	5.5 V			Not Qualified	COMPLEMENTARY	4.5 V	21 mA		e4				F/FAST
N74F112N,602	NXP Semiconductors	J-K FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	2	80000000 Hz	TTL		2		5	5	50 pF	IN-LINE	DIP16,.3	7.5 ns	20 Amp	FF/Latches	2.54 mm	70 Cel		NEGATIVE EDGE	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	80 MHz	R-PDIP-T16		5.5 V	4.2 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.5 V	21 mA		e4	40	245	19.025 mm	F/FAST
N74F174N,602	NXP Semiconductors	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	80000000 Hz	TTL		6		5	5	50 pF	IN-LINE	DIP16,.3	11 ns	20 Amp	FF/Latches	2.54 mm	70 Cel		POSITIVE EDGE	NICKEL PALLADIUM GOLD	DUAL	80 MHz	R-PDIP-T16		5.5 V	4.2 mm	7.62 mm	Not Qualified	TRUE	4.5 V	45 mA		e4			19.025 mm	F/FAST
N74F175AD,602	NXP Semiconductors	D FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	125000000 Hz	TTL		4		5	5	50 pF	SMALL OUTLINE	SOP16,.25	9 ns	20 Amp	FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	NICKEL PALLADIUM GOLD	DUAL	125 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V	31 mA		e4			9.9 mm	F/FAST
N74F175AD,623	NXP Semiconductors	D FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	125000000 Hz	TTL		4	TR	5	5	50 pF	SMALL OUTLINE	SOP16,.25	9 ns	20 Amp	FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	NICKEL PALLADIUM GOLD	DUAL	125 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V	31 mA		e4			9.9 mm	F/FAST
N74F175AN,602	NXP Semiconductors	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	125000000 Hz	TTL		4	TUBE	5	5	50 pF	IN-LINE	DIP16,.3	9 ns	20 Amp	FF/Latches	2.54 mm	70 Cel		POSITIVE EDGE	NICKEL PALLADIUM GOLD	DUAL	125 MHz	R-PDIP-T16		5.5 V	4.2 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.5 V	31 mA		e4			19.025 mm	F/FAST
N74F259D,602	NXP Semiconductors	D LATCH	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		1		5	5	50 pF	SMALL OUTLINE	SOP16,.25	10 ns	20 Amp	FF/Latches	1.27 mm	70 Cel		LOW LEVEL	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G16	1	5.5 V			Not Qualified	TRUE	4.5 V	75 mA	1:8 DMUX FOLLOWED BY LATCH; RESET ACTIVE ONLY WHEN LATCH ENABLE IS HIGH	e4				F/FAST

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.