GULL WING Latches & Flip-Flops 491

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Schmitt Trigger	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SN74ALS74ADRE4	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	34000000 Hz	TTL		1	TR	5	5	50 pF	SMALL OUTLINE	SOP14,.25	18 ns	8 Amp	FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	34 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.91 mm	Not Qualified	COMPLEMENTARY	4.5 V	4 mA		e4	30	260	8.65 mm	ALS
SN74AUC1G74DCURE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	VSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	200000000 Hz	CMOS		1	TR	1.2	1.2/2.5	15 pF	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	3.8 ns	9 Amp	FF/Latches	.5 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	275 MHz	R-PDSO-G8	1	2.7 V	.9 mm	2 mm	Not Qualified	COMPLEMENTARY	.8 V	.01 mA		e4	NOT SPECIFIED	260	2.3 mm	AUC
SN74AUC2G79DCURE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	VSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	200000000 Hz	CMOS		1	TR	1.2	1.2/2.5	15 pF	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	3.9 ns	5 Amp	FF/Latches	.5 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	275 MHz	R-PDSO-G8	1	2.7 V	.9 mm	2 mm	Not Qualified	TRUE	.8 V			e4	30	260	2.3 mm	AUC
SN74AUC2G80DCURE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	VSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	200000000 Hz	CMOS		1	TR	1.2	1.2/2.5	15 pF	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	3.9 ns	5 Amp	FF/Latches	.5 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	275 MHz	R-PDSO-G8	1	2.7 V	.9 mm	2 mm	Not Qualified	INVERTED	.8 V			e4	30	260	2.3 mm	AUC
SN74HC259DRE4	Texas Instruments	D LATCH	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1		CMOS		8	TR	5	2/6	50 pF	SMALL OUTLINE	SOP16,.25	165 ns	5.2 Amp	FF/Latches	1.27 mm	85 Cel		LOW LEVEL	-40 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G16	1	6 V	1.75 mm	3.91 mm	Not Qualified	TRUE	2 V	.08 mA	1:8 DMUX FOLLOWED BY LATCH	e4	30	260	9.9 mm	HC
SN74HC273DWRE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	21000000 Hz	CMOS		8	TR	5	2/6	50 pF	SMALL OUTLINE	SOP20,.4	200 ns	5.2 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	25 MHz	R-PDSO-G20	1	6 V	2.65 mm	7.5 mm	Not Qualified	TRUE	2 V	.08 mA	DUMMY VAL	e4	NOT SPECIFIED	260	12.8 mm	HC/UH
SN74HC74DRE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	25000000 Hz	CMOS		1	TR	5	2/6	50 pF	SMALL OUTLINE	SOP14,.25	220 ns	5.2 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	29 MHz	R-PDSO-G14	1	6 V	1.75 mm	3.91 mm	Not Qualified	COMPLEMENTARY	2 V	.04 mA		e4	30	260	8.65 mm	HC
SN74HC74DRG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	25000000 Hz	CMOS		1	TR	5	2/6	50 pF	SMALL OUTLINE	SOP14,.25	220 ns	5.2 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	29 MHz	R-PDSO-G14	1	6 V	1.75 mm	3.91 mm	Not Qualified	COMPLEMENTARY	2 V	.04 mA		e4	30	260	8.65 mm	HC
SN74HC74PWG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	25000000 Hz	CMOS		1	TUBE	5	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	220 ns	5.2 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	29 MHz	R-PDSO-G14	1	6 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V	.04 mA		e4	30	260	5 mm	HC
SN74HCT273DWE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	20000000 Hz	CMOS		8	TUBE	5	5	50 pF	SMALL OUTLINE	SOP20,.4	42 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	23 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	.08 mA		e4	NOT SPECIFIED	260	12.8 mm	HCT
SN74LS109ADRE4	Texas Instruments	J-KBAR FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	2	25000000 Hz	TTL		2	TR	5	5	15 pF	SMALL OUTLINE	SOP16,.25	40 ns	8 Amp	FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	25 MHz	R-PDSO-G16	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.75 V	8 mA	INVERTED K INPUT	e4	NOT SPECIFIED	260	9.9 mm	LS
SN74LS112ADRE4	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	2	30000000 Hz	TTL		2	TR	5	5	15 pF	SMALL OUTLINE	SOP16,.25	20 ns	8 Amp	FF/Latches	1.27 mm	70 Cel		NEGATIVE EDGE	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	45 MHz	R-PDSO-G16	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.75 V	6 mA		e4	NOT SPECIFIED	260	9.9 mm	LS
SN74LS279ADE4	Texas Instruments	R-S LATCH	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	4		TTL		2	TUBE	5	5	15 pF	SMALL OUTLINE	SOP16,.25	27 ns	8 Amp	FF/Latches	1.27 mm	70 Cel		LOW LEVEL	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL		R-PDSO-G16	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	7 mA	WITH DUAL S INPUT FOR TWO FUNCTIONS	e4	NOT SPECIFIED	260	9.9 mm	LS
SN74LS375NSRE4	Texas Instruments	D LATCH	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2		TTL		2	TR	5	5		SMALL OUTLINE	SOP16,.3	30 ns	8 Amp	FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel		DUAL		R-PDSO-G16		5.25 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	4.75 V	12 mA	DUMMY VAL		NOT SPECIFIED	NOT SPECIFIED	10.2 mm	LS
SN74LV174ADE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	50000000 Hz	CMOS		6	TUBE	2.5	3.3	50 pF	SMALL OUTLINE	SOP16,.25	23 ns	12 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	110 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V	.02 mA		e4	NOT SPECIFIED	260	9.9 mm	LV/LV-A/LVX/H
SN74LV273APWE4	Texas Instruments	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	45000000 Hz	CMOS		8	TUBE	3.3	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	27 ns	12 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	100 MHz	R-PDSO-G20	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V	.02 mA		e4	30	260	6.5 mm	LV/LV-A/LVX/H
SN74LV74APWRE4	Texas Instruments	D FLIP-FLOP	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	45000000 Hz	CMOS		1	TUBE	2.5	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	23 ns	6 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	110 MHz	R-PDSO-G14	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	5 mm	LV/LV-A/LVX/H
SN74LVC2G74DCURE4	Texas Instruments	D FLIP-FLOP	AUTOMOTIVE	GULL WING	8	VSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	175000000 Hz	CMOS		1	TR	1.8	3.3		SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	14.4 ns	32 Amp	FF/Latches	.5 mm	125 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	200 MHz	R-PDSO-G8	1	5.5 V	.9 mm	2 mm	Not Qualified	COMPLEMENTARY	1.65 V	.01 mA		e4	NOT SPECIFIED	260	2.3 mm	LVC/LCX/Z
SN74LVC74ADBRG4	Texas Instruments	D FLIP-FLOP	AUTOMOTIVE	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	150000000 Hz	CMOS		1	TR	1.8	3.3	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP14,.3	7.1 ns	24 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	150 MHz	R-PDSO-G14	1	3.6 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	1.65 V	.01 mA		e4	NOT SPECIFIED	260	6.2 mm	LVC/LCX/Z
SN74LVC74ADE4	Texas Instruments	D FLIP-FLOP	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	150000000 Hz	CMOS		1	TUBE	1.8	3.3	50 pF	SMALL OUTLINE	SOP14,.25	7.1 ns	24 Amp	FF/Latch	1.27 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	150 MHz	R-PDSO-G14	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	1.65 V	.01 mA		e4	NOT SPECIFIED	260	8.65 mm	LVC/LCX/Z
SN74LVC74ADG4	Texas Instruments	D FLIP-FLOP	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	150000000 Hz	CMOS		1	TUBE	1.8	3.3	50 pF	SMALL OUTLINE	SOP14,.25	7.1 ns	24 Amp	FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	150 MHz	R-PDSO-G14	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	1.65 V			e4	30	260	8.65 mm	LVC/LCX/Z
SN74LVC74ADRG4	Texas Instruments	D FLIP-FLOP	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	150000000 Hz	CMOS		1	TR	1.8	3.3	50 pF	SMALL OUTLINE	SOP14,.25	7.1 ns	24 Amp	FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	150 MHz	R-PDSO-G14	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	1.65 V			e4	30	260	8.65 mm	LVC/LCX/Z
SN74LVC74APWTG4	Texas Instruments	D FLIP-FLOP	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	150000000 Hz	CMOS		1	TR	1.8	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	7.1 ns	24 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	150 MHz	R-PDSO-G14	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	1.65 V	.01 mA		e4	NOT SPECIFIED	260	5 mm	LVC/LCX/Z
SN74LVTH273DWRE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	150000000 Hz	BICMOS		8	TR	3.3	3.3	50 pF	SMALL OUTLINE	SOP20,.4	5.5 ns	64 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	150 MHz	R-PDSO-G20	1	3.6 V	2.65 mm	7.5 mm	Not Qualified	TRUE	2.7 V	5 mA		e4	30	260	12.8 mm	LVT
SN74SSTVF16859GRG4	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	64	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	500000000 Hz	CMOS		13	TR	2.5	2.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP64,.32,20	2.5 ns	16 Amp	Other Logic ICs	.5 mm	70 Cel		POSITIVE EDGE	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	500 MHz	R-PDSO-G64	2	2.7 V	1.2 mm	6.1 mm	Not Qualified	TRUE	2.3 V			e4	NOT SPECIFIED	260	17 mm	SSTV
74HSTL162822DGGRE4	Texas Instruments	D LATCH	INDUSTRIAL	GULL WING	64	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1				14		3.3	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP64,.32,20	5.7 ns		FF/Latches	.5 mm	90 Cel	SERIES-RESISTOR	LOW LEVEL	-40 Cel		DUAL		R-PDSO-G64		3.45 V	1.2 mm	6.1 mm	Not Qualified	TRUE	3.15 V				NOT SPECIFIED	NOT SPECIFIED	17 mm	TTL/H/L
74SSTV16859DGGRG4	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	64	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	200000000 Hz	CMOS		13	TR	2.5	2.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP64,.32,20	2.8 ns	20 Amp	Other Logic ICs	.5 mm	70 Cel	3-STATE	POSITIVE EDGE	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	200 MHz	R-PDSO-G64	2	2.7 V	1.2 mm	6.1 mm	Not Qualified	TRUE	2.3 V			e4	NOT SPECIFIED	260	17 mm	SSTV
CD74HC377PW	Texas Instruments	D FLIP-FLOP	MILITARY	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	20000000 Hz	CMOS		8	TUBE	5	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	265 ns	5.2 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	23 MHz	R-PDSO-G20	1	6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V	.08 mA	WITH HOLD MODE	e4	30	260	6.5 mm	HC
SN74HC273QDWRQ1	Texas Instruments	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	18000000 Hz	CMOS	AEC-Q100	8	TR	5	2/6	50 pF	SMALL OUTLINE	SOP20,.4	240 ns	4 Amp	FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	21 MHz	R-PDSO-G20		6 V	2.65 mm	7.5 mm	Not Qualified	TRUE	2 V				NOT SPECIFIED	NOT SPECIFIED	12.8 mm	HC/UH
SN74AUP1G79DBVRG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	220000000 Hz	CMOS		1	TR	1.2	1.2/3.3	30 pF	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	24 ns	4 Amp	FF/Latches	.95 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	260 MHz	R-PDSO-G5	1	3.6 V	1.45 mm	1.6 mm	Not Qualified	TRUE	.8 V	.0009 mA		e4	NOT SPECIFIED	260	2.9 mm	AUP/ULP/V
SN74AUP1G80DCKRE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	260000000 Hz	CMOS		1	TR	1.2	1.2/3.3	30 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	28.7 ns	4 Amp	FF/Latches	.65 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	260 MHz	R-PDSO-G5	1	3.6 V	1.1 mm	1.25 mm	Not Qualified	INVERTED	.8 V	.0009 mA		e4	NOT SPECIFIED	260	2 mm	AUP/ULP/V
SN74LVC1G175DCKR	Texas Instruments	D FLIP-FLOP	AUTOMOTIVE	GULL WING	6	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	1000000 Hz	CMOS		1	TR	1.8	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	15.4 ns	32 Amp	FF/Latches	.65 mm	125 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	175 MHz	R-PDSO-G6	1	5.5 V	1.1 mm	1.25 mm	Not Qualified	TRUE	1.65 V	.01 mA		e4	NOT SPECIFIED	260	2 mm	LVC/LCX/Z
SN74ALS273DWRG4	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		8	TR	5	5	50 pF	SMALL OUTLINE	SOP20,.4	15 ns	24 Amp	FF/Latch	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	35 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	29 mA		e4	30	260	12.8 mm	ALS
SN74AUC1G79DCKRE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	200000000 Hz	CMOS		1	TR	1.2	1.2/2.5	15 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	3.9 ns	9 Amp	FF/Latches	.65 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	275 MHz	R-PDSO-G5	1	2.7 V	1.1 mm	1.25 mm	Not Qualified	TRUE	.8 V	.01 mA		e4	30	260	2 mm	AUC
SN74LVC1G79DCKRE4	Texas Instruments	D FLIP-FLOP	AUTOMOTIVE	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	160000000 Hz	CMOS		1	TR	1.8	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	20.5 ns	32 Amp	FF/Latches	.65 mm	125 Cel	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	160 MHz	R-PDSO-G5	1	5.5 V	1.1 mm	1.25 mm	Not Qualified	TRUE	1.65 V	.01 mA		e4	30	260	2 mm	LVC/LCX/Z
SN74LVC1G80DCKRE4	Texas Instruments	D FLIP-FLOP	AUTOMOTIVE	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	160000000 Hz	CMOS		1	TR	1.8	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	9.9 ns	32 Amp	FF/Latches	.65 mm	125 Cel	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	160 MHz	R-PDSO-G5	1	5.5 V	1.1 mm	1.25 mm	Not Qualified	INVERTED	1.65 V	.01 mA		e4	30	260	2 mm	LVC/LCX/Z
MC100EP29DTG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	2		ECL		1	RAIL	3.3	-4.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	.575 ns		FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G20	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	3 V	60 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e4	30	260	6.5 mm	100E
MC10EP29DTR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	2		ECL		1	TR	3.3	-5.2		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	.5 ns		FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G20	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	3 V	60 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e4	30	260	6.5 mm	10E
MC10H175MG	Onsemi	D LATCH	COMMERCIAL EXTENDED	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		ECL		5	RAIL				SMALL OUTLINE	SOP16,.3	2 ns		FF/Latches	1.27 mm	75 Cel		LOW LEVEL	0 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G16			2.05 mm	5.275 mm	Not Qualified	TRUE		107 mA		e4		260	10.2 mm	10H
MC74VHC74MELG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	75000000 Hz	CMOS		1	TR	3.3	2/5.5	50 pF	SMALL OUTLINE	SOP14,.3	17.5 ns	8 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	110 MHz	R-PDSO-G14	3	5.5 V	2.05 mm	5.275 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	10.2 mm	AHC/VHC
MC10H176MG	Onsemi	D FLIP-FLOP	COMMERCIAL EXTENDED	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	250000000 Hz	ECL		6	RAIL				SMALL OUTLINE	SOP16,.3	2.2 ns		FF/Latches	1.27 mm	75 Cel		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	250 MHz	R-PDSO-G16			2.05 mm	5.275 mm	Not Qualified	TRUE		123 mA		e4		260	10.2 mm	10H
MC74HC112ADG	Onsemi	J-K FLIP-FLOP	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	20000000 Hz	CMOS		1	TUBE	4.5	2/6	50 pF	SMALL OUTLINE	SOP16,.25	250 ns	4 Amp	FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-55 Cel	MATTE TIN	DUAL	35 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V			e3	30	260	9.9 mm	HC/UH
SN74LVTH273MNSREP	Texas Instruments	D FLIP-FLOP	MILITARY	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	150000000 Hz	BICMOS		8	TR	3.3	3.3	50 pF	SMALL OUTLINE	SOP20,.3	7 ns	64 Amp	FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	150 MHz	R-PDSO-G20	1	3.6 V	2 mm	5.3 mm	Not Qualified	TRUE	2.7 V	5 mA		e4	30	260	12.6 mm	LVT
SN74AUP1G74DCURG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	VSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	40000000 Hz	CMOS		1	TR	1.2	1.2/3.3	30 pF	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	27 ns	4 Amp	FF/Latches	.5 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	180 MHz	R-PDSO-G8	1	3.6 V	.9 mm	2 mm	Not Qualified	COMPLEMENTARY	.8 V	.0009 mA		e4	NOT SPECIFIED	260	2.3 mm	AUP/ULP/V
74AHC259D-Q100J	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS	AEC-Q100	1	TR	5	2/5.5	50 pF	SMALL OUTLINE	SOP16,.25	19 ns	8 Amp	FF/Latches	1.27 mm	125 Cel		LOW LEVEL	-40 Cel		DUAL		R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V						9.9 mm	AHC/VHC/H/U/V
74AHCT259D-Q100J	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS	AEC-Q100	1	TR	5	5	50 pF	SMALL OUTLINE	SOP16,.25	13 ns	8 Amp	FF/Latches	1.27 mm	125 Cel		LOW LEVEL	-40 Cel		DUAL		R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V						9.9 mm	AHCT/VHCT/VT
74AHCT259PW-Q100J	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS	AEC-Q100	1	TR	5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	13 ns	8 Amp	FF/Latches	.65 mm	125 Cel		LOW LEVEL	-40 Cel		DUAL		R-PDSO-G16		5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	4.5 V						5 mm	AHCT/VHCT/VT
SSTV16857DGG,118	NXP Semiconductors	D FLIP-FLOP	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1				14		2.5	2.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	2.8 ns		Other Logic ICs	.5 mm	70 Cel		POSITIVE EDGE	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	200 MHz	R-PDSO-G48		2.7 V	1.2 mm	6.1 mm	Not Qualified	TRUE	2.3 V			e4			12.5 mm	SSTV

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.