RECTANGULAR Multiplexer & Demultiplexer 393

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Technology	Screening Level	No. of Inputs	Packing Method	Nominal Supply Voltage / Vsup (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	No. of Outputs	Peak Reflow Temperature (C)	Length	Family
TC74VCX157FT(EL)	Toshiba	MULTIPLEXER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	4	CMOS		2		1.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		35 ns		.65 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G16		3.6 V	1.2 mm	4.4 mm	TRUE	1.2 V			NOT SPECIFIED	1	NOT SPECIFIED	5 mm	ALVC/VCX/A
74AHC157D-Q100J	Nexperia	MULTIPLEXER	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	4	CMOS	AEC-Q100	2	TR, 13 INCH	5		SMALL OUTLINE		16.5 ns		1.27 mm	125 Cel		-40 Cel	NICKEL PALLADIUM GOLD SILVER	DUAL	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	TRUE	2 V		e4	30	1	260	9.9 mm	AHC/VHC/H/U/V
74AHCT157BQ-Q100X	Nexperia	MULTIPLEXER	AUTOMOTIVE	NO LEAD	16	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	4	CMOS	AEC-Q100	2	TR, 7 INCH	5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		11 ns		.5 mm	125 Cel		-40 Cel	NICKEL PALLADIUM GOLD SILVER	QUAD	R-PQCC-N16	1	5.5 V	1 mm	2.5 mm	TRUE	4.5 V		e4	30	1	260	3.5 mm	AHCT/VHCT/VT
74AHCT157D-Q100J	Nexperia	MULTIPLEXER	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	4	CMOS	AEC-Q100	2	TR, 13 INCH	5		SMALL OUTLINE		11 ns		1.27 mm	125 Cel		-40 Cel	NICKEL PALLADIUM GOLD SILVER	DUAL	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	TRUE	4.5 V		e4	30	1	260	9.9 mm	AHCT/VHCT/VT
74HC257D-Q100J	Nexperia	MULTIPLEXER	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	4	CMOS	AEC-Q100	2	TR, 13 INCH	5		SMALL OUTLINE		165 ns		1.27 mm	125 Cel	3-STATE	-40 Cel	NICKEL PALLADIUM GOLD SILVER	DUAL	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	TRUE	2 V		e4	30	1	260	9.9 mm	HC/UH
74HC257PW-Q100J	Nexperia	MULTIPLEXER	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	4	CMOS	AEC-Q100	2	TR, 13 INCH	5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		165 ns		.65 mm	125 Cel	3-STATE	-40 Cel	NICKEL PALLADIUM GOLD SILVER	DUAL	R-PDSO-G16	1	5.5 V	1.1 mm	4.4 mm	TRUE	2 V		e4	30	1	260	5 mm	HC/UH
74HCT257PW-Q100J	Nexperia	MULTIPLEXER	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	4	CMOS	AEC-Q100	2	TR, 13 INCH	5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		45 ns		.65 mm	125 Cel	3-STATE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	5.5 V	1.1 mm	4.4 mm	TRUE	4.5 V		e4	30	1	260	5 mm	HCT
NL7SZ19DBVT1G	Onsemi	MULTIPLEXER AND DEMUX/DECODER	MILITARY	GULL WING	6	TSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS		1	TR	3.3	50 pF	SMALL OUTLINE, THIN PROFILE	TSOP6,.11,37	11 ns	24 Amp	.95 mm	125 Cel		-55 Cel	MATTE TIN	DUAL	R-PDSO-G6	1	5.5 V	1.1 mm	1.5 mm	COMPLEMENTARY	1.65 V	.01 mA	e3	30	2	260	3 mm	LVC/LCX/Z
SN74HC257AN	Texas Instruments	MULTIPLEXER		THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	YES	4	CMOS		2	TUBE	5	150 pF	IN-LINE	DIP16,.3	190 ns	7.8 Amp	2.54 mm	85 Cel	3-STATE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		6 V	5.08 mm	7.62 mm	TRUE	2 V	.08 mA	e4		1		19.305 mm	HC/UH

Multiplexer & Demultiplexer

Multiplexers and demultiplexers are electronic circuits that are used to transmit and receive multiple signals over a single channel. They are essential components of digital systems and are used to reduce the number of transmission lines required to transmit multiple signals.

A multiplexer, also known as a mux, is a digital circuit that can select one of several input signals and transmit it to a single output line based on a control signal. A multiplexer can have two or more inputs and a single output, and the selection of the input is determined by the binary value of the control signal. Multiplexers are used to reduce the number of transmission lines required to transmit multiple signals over a long distance.

A demultiplexer, also known as a demux, is a digital circuit that can distribute a single input signal to one of several output lines based on a control signal. A demultiplexer can have a single input and two or more outputs, and the selection of the output is determined by the binary value of the control signal. Demultiplexers are used to receive multiple signals transmitted over a single line.

Multiplexers and demultiplexers are commonly used together in digital systems to transmit and receive multiple signals over a single channel. They are used in various applications, including digital signal processing, telecommunications, and data storage systems. Multiplexers and demultiplexers are also used in memory systems to store and retrieve data from memory cells.

Multiplexers and demultiplexers can be designed using various technologies, including transistor-transistor logic (TTL), complementary metal-oxide-semiconductor (CMOS), and field-programmable gate arrays (FPGAs). They can also be cascaded together to increase the number of inputs or outputs.