RECTANGULAR Motion Control ICs 879

  1. Home
  2. Motion Control ICs
Manufacturers
    • Allegro MicroSystems
    • Analog Devices
    • Atmel
    • Beckhoff Automation
    • Broadcom
    • Carlo Gavazzi Holding Ag
    • Cybernetic Micro Systems
    • Diodes Incorporated
    • Elmos Semiconductor Ag
    • Ericsson Power Modules Ab
    • Fairchild Semiconductor
    • Freescale Semiconductor
    • Fuji Electric
    • Infineon Technologies
    • International Rectifier
    • Maxim Integrated
    • Maxon Motor Ag
    • Micrel
    • Microchip Technology
    • Mitsubishi Electric
    • Monolithic Power Systems
    • Motorola
    • NXP Semiconductors
    • New Japan Radio
    • Omron
    • Onsemi
    • Performance Motion Devices
    • Power Integrations
    • ROHM
    • Renesas Electronics
    • Rifa Capacitors
    • STMicroelectronics
    • Samsung
    • Sanken Electric
    • Sony
    • Sprague Electric
    • Texas Instruments
    • Toshiba
    • Trinamic Motion Control & Kg
    • Unitrode
    • Vishay Intertechnology
Other IC type
    • 3-PHASE BRUSHLESS DC MOTOR CONTROLLER
    • AC MOTOR CONTROLLER
    • AC MOTOR DRIVER
    • AC SERVO MOTOR CONTROLLER
    • BRUSH DC MOTOR CONTROLLER
    • BRUSHLESS DC MOTOR CONTROLLER
    • DISK DRIVE MOTOR CONTROLLER
    • FULL BRIDGE BRUSH DC MOTOR CONTROLLER
    • HALF BRIDGE BRUSH DC MOTOR CONTROLLER
    • INTELLIGENT POWER MODULE(IPM)
    • STEPPER MOTOR CONTROLLER
    • UNIVERSAL MOTOR CONTROLLER
    • VOICE COIL MOTOR CONTROLLER
Temperature Grade
    • AUTOMOTIVE
    • COMMERCIAL
    • COMMERCIAL EXTENDED
    • INDUSTRIAL
    • MILITARY
    • OTHER
No. of Terminals
    • 10
    • 100
    • 11
    • 12
    • 13
    • 14
    • 144
    • 15
    • 16
    • 18
    • 19
    • 20
    • 21
    • 22
    • 23
    • 24
    • 25
    • 26
    • 27
    • 28
    • 29
    • 3
    • 30
    • 31
    • 32
    • 34
    • 35
    • 36
    • 37
    • 38
    • 39
    • 4
    • 40
    • 42
    • 43
    • 44
    • 47
    • 48
    • 49
    • 5
    • 52
    • 54
    • 56
    • 6
    • 60
    • 64
    • 68
    • 7
    • 8
    • 80
    • 89
    • 9
Package Code
    • BCC
    • BGA
    • BLFQFP
    • DFM
    • DFP
    • DIE
    • DIP
    • DMA
    • FBGA
    • FQFP
    • HDFM
    • HDIP
    • HLFQFP
    • HLQFP
    • HLSOP
    • HLSSOP
    • HQCCN
    • HQFF
    • HQFP
    • HSDIP
    • HSIP
    • HSON
    • HSOP
    • HSSOP
    • HSZIP
    • HTFQFP
    • HTQFP
    • HTSON
    • HTSSOP
    • HVQCCN
    • HVSON
    • HVSSOP
    • HZIP
    • LFQFP
    • LGA
    • LQFP
    • LSOF
    • LSOP
    • LSSOP
    • QCCJ
    • QCCN
    • QFI
    • QFP
    • QMA
    • SDIP
    • SFM
    • SIP
    • SOF
    • SON
    • SOP
    • SSOP
    • SZIP
    • TFBGA
    • TFQFP
    • TO-220
    • TO-263
    • TO-52
    • TO-92
    • TQFP
    • TSOP
    • TSSOP
    • UFBGA
    • VBGA
    • VFBGA
    • VFLGA
    • VQCCN
    • VSOF
    • VSON
    • VSOP
    • VSSOF
    • VSSOP
    • XFM
    • XMA
    • ZFM
    • ZIP
    • ZMA
    • xma
Package Shape (1)
    • RECTANGULAR
    • ROUND
    • SQUARE
    • UNSPECIFIED
Surface Mount
    • NO
    • YES
Package Body Material
    • CERAMIC
    • CERAMIC, GLASS-SEALED
    • CERAMIC, METAL-SEALED COFIRED
    • METAL
    • PLASTIC/EPOXY
    • UNSPECIFIED
Maximum Supply Current (Isup)
    • .005 mA
    • .01 mA
    • .015 mA
    • .02 mA
    • .045 mA
    • .05 mA
    • .06 mA
    • .075 mA
    • .1 mA
    • .12 mA
    • .155 mA
    • .16 mA
    • .2 mA
    • .23 mA
    • .3 mA
    • .4 mA
    • .475 mA
    • .5 mA
    • .6 mA
    • .65 mA
    • .7 mA
    • .75 mA
    • .8 mA
    • .9 mA
    • 1 mA
    • 1.2 mA
    • 1.3 mA
    • 1.35 mA
    • 1.4 mA
    • 1.5 mA
    • 1.6 mA
    • 1.7 mA
    • 1.8 mA
    • 1.9 mA
    • 1.95 mA
    • 10 mA
    • 10.5 mA
    • 100 mA
    • 105 mA
    • 11 mA
    • 11.5 mA
    • 110 mA
    • 12 mA
    • 12.5 mA
    • 120 mA
    • 13 mA
    • 13.5 mA
    • 1300 mA
    • 14 mA
    • 14.5 mA
    • 145 mA
    • 15 mA
    • 155 mA
    • 16 mA
    • 17 mA
    • 18 mA
    • 18.5 mA
    • 18.76 mA
    • 18.8 mA
    • 19 mA
    • 2 mA
    • 2.1 mA
    • 2.2 mA
    • 2.3 mA
    • 2.4 mA
    • 2.5 mA
    • 2.7 mA
    • 2.8 mA
    • 20 mA
    • 200 mA
    • 21 mA
    • 22 mA
    • 22.5 mA
    • 23 mA
    • 24 mA
    • 25 mA
    • 25.3 mA
    • 26 mA
    • 27 mA
    • 27500 mA
    • 28 mA
    • 29 mA
    • 29.5 mA
    • 29500 mA
    • 3 mA
    • 3.1 mA
    • 3.2 mA
    • 3.3 mA
    • 3.35 mA
    • 3.4 mA
    • 3.5 mA
    • 3.6 mA
    • 3.65 mA
    • 3.7 mA
    • 30 mA
    • 30.4 mA
    • 30.5 mA
    • 30.9 mA
    • 31 mA
    • 32 mA
    • 33 mA
    • 35 mA
    • 36 mA
    • 36.5 mA
    • 38 mA
    • 4 mA
    • 4.2 mA
    • 4.4 mA
    • 4.5 mA
    • 4.6 mA
    • 4.7 mA
    • 4.9 mA
    • 40 mA
    • 41 mA
    • 42 mA
    • 45 mA
    • 47 mA
    • 48 mA
    • 48.5 mA
    • 5 mA
    • 5.5 mA
    • 5.7 mA
    • 50 mA
    • 51 mA
    • 5200 mA
    • 55 mA
    • 6 mA
    • 6.25 mA
    • 6.4 mA
    • 6.5 mA
    • 6.8 mA
    • 60 mA
    • 64 mA
    • 65 mA
    • 67 mA
    • 68 mA
    • 7 mA
    • 7.4 mA
    • 7.5 mA
    • 7.8 mA
    • 70 mA
    • 75 mA
    • 78 mA
    • 8 mA
    • 8.2 mA
    • 8.5 mA
    • 8.8 mA
    • 80 mA
    • 85 mA
    • 9 mA
    • 9.1 mA
    • 9.5 mA
    • 9.6 mA
    • 92 mA
    • 95 mA
Maximum Output Current
    • -.01 A
    • .001 A
    • .002 A
    • .003 A
    • .005 A
    • .006 A
    • .01 A
    • .015 A
    • .02 A
    • .025 A
    • .03 A
    • .04 A
    • .05 A
    • .07 A
    • .085 A
    • .1 A
    • .1023 A
    • .12 A
    • .13 A
    • .14 A
    • .145 A
    • .15 A
    • .17 A
    • .192 A
    • .2 A
    • .25 A
    • .26 A
    • .3 A
    • .35 A
    • .36 A
    • .4 A
    • .45 A
    • .48 A
    • .5 A
    • .55 A
    • .6 A
    • .7 A
    • .75 A
    • .8 A
    • .81 A
    • .85 A
    • .9 A
    • .96 A
    • 1 A
    • 1.1 A
    • 1.2 A
    • 1.3 A
    • 1.35 A
    • 1.4 A
    • 1.5 A
    • 1.6 A
    • 1.7 A
    • 1.75 A
    • 1.76 A
    • 1.8 A
    • 1.9 A
    • 10 A
    • 10.3 A
    • 100 A
    • 11 A
    • 110 A
    • 12 A
    • 13 A
    • 13.9 A
    • 14 A
    • 140 A
    • 144 A
    • 15 A
    • 150 A
    • 16 A
    • 17 A
    • 18 A
    • 180 A
    • 2 A
    • 2.1 A
    • 2.2 A
    • 2.25 A
    • 2.3 A
    • 2.4 A
    • 2.5 A
    • 2.6 A
    • 2.65 A
    • 2.8 A
    • 20 A
    • 200 A
    • 21 A
    • 21.6 A
    • 22 A
    • 24 A
    • 25 A
    • 27 A
    • 3 A
    • 3.1 A
    • 3.2 A
    • 3.3 A
    • 3.5 A
    • 3.6 A
    • 3.7 A
    • 3.8 A
    • 3.9 A
    • 30 A
    • 300 A
    • 32 A
    • 35 A
    • 38 A
    • 4 A
    • 4.1 A
    • 4.2 A
    • 4.4 A
    • 4.5 A
    • 4.6 A
    • 40 A
    • 400 A
    • 45 A
    • 46 A
    • 49 A
    • 5 A
    • 5.2 A
    • 5.6 A
    • 5.8 A
    • 50 A
    • 51 A
    • 55 A
    • 56 A
    • 6 A
    • 6.5 A
    • 6.8 A
    • 60 A
    • 600 A
    • 68 A
    • 69 A
    • 7 A
    • 7.5 A
    • 70 A
    • 75 A
    • 76 A
    • 8 A
    • 8.1 A
    • 8.2 A
    • 8.7 A
    • 80 A
    • 9 A
    • 9.4 A
    • 90 A
No. of Functions
    • 1
    • 2
    • 3
    • 4
    • 6
No. of Channels
    • 1
Technology
    • BCD
    • BCDMOS
    • BICMOS
    • BIMOS
    • BIPOLAR
    • CDMOS
    • CMOS
    • DMOS
    • HVCMOS
    • HYBRID
    • MOS
    • NMOS
    • SMARTMOS
Screening Level
    • 38535V;38534K;883S
    • AEC-Q100
    • MIL-PRF-38535 Class V
    • MIL-STD-883
    • MIL-STD-883 Class B
    • TS 16949
Terminal Form
    • BALL
    • BUTT
    • FLAT
    • GULL WING
    • J BEND
    • NO LEAD
    • PIN/PEG
    • THROUGH-HOLE
    • UNSPECIFIED
    • WIRE
Nominal Negative Supply Voltage (Vsup)
    • -15 V
    • -5 V
Nominal Supply Voltage (Vsup)
    • 1 V
    • 1.2 V
    • 1.5 V
    • 1.8 V
    • 1.9 V
    • 10 V
    • 100 V
    • 12 V
    • 12.5 V
    • 12.8 V
    • 13 V
    • 13.2 V
    • 13.5 V
    • 14 V
    • 14.4 V
    • 14.5 V
    • 14.8 V
    • 15 V
    • 15.3 V
    • 15.5 V
    • 150 V
    • 16 V
    • 18 V
    • 2 V
    • 2.3 V
    • 2.4 V
    • 2.6 V
    • 2.8 V
    • 2.9 V
    • 20 V
    • 22.5 V
    • 220 V
    • 24 V
    • 27 V
    • 28 V
    • 280 V
    • 3 V
    • 3.2 V
    • 3.25 V
    • 3.3 V
    • 3.5 V
    • 3.6 V
    • 3.7 V
    • 30 V
    • 300 V
    • 310 V
    • 32 V
    • 35 V
    • 36 V
    • 37 V
    • 4.2 V
    • 4.3 V
    • 4.5 V
    • 4.8 V
    • 400 V
    • 42 V
    • 450 V
    • 460 V
    • 48 V
    • 5 V
    • 5.5 V
    • 50 V
    • 500 V
    • 6 V
    • 6.3 V
    • 6.7 V
    • 600 V
    • 7 V
    • 7.2 V
    • 7.3 V
    • 7.4 V
    • 7.5 V
    • 7.75 V
    • 8 V
    • 9 V
Power Supplies (V)
    • +-15
    • +-5
    • +-5,+-15
    • 1.2
    • 1.5
    • 1.5,3,4.75
    • 1.5,3.3
    • 1.8,3.3
    • 1.8,3/3.3
    • 1.8/3.3
    • 1.8/4.5
    • 1.8/5
    • 1.8/8
    • 1.9
    • 10
    • 10,15
    • 10/42
    • 10/44
    • 12
    • 12,18
    • 12,24
    • 12,50
    • 12/18
    • 12/24
    • 12/52
    • 13
    • 14.4
    • 14.5
    • 15
    • 15,141
    • 15,280
    • 15,300
    • 15,325
    • 15,400
    • 15,600
    • 15,800
    • 15.3
    • 16
    • 16/34
    • 18/50
    • 2.2/16
    • 2.3
    • 2.4
    • 2.4,3.2
    • 2.5/10
    • 2.5/10.8
    • 2.5/5
    • 2.5/6.5
    • 2.5/9
    • 2.7/6
    • 2.8
    • 2.9
    • 20
    • 20/30
    • 24
    • 28/48
    • 3
    • 3,12
    • 3,24
    • 3,4.5
    • 3,4.75
    • 3,5
    • 3,6
    • 3.3
    • 3.3,12
    • 3.3,24
    • 3.3,5
    • 3.3,6
    • 3.3,6/28
    • 3.3,6/30
    • 3.3,7/28
    • 3.3/5
    • 3.3/5,3.3/50
    • 3.3/5,32
    • 3.3/5,35
    • 3.3/5,36
    • 3.3/5,45
    • 3.3/5,5.5/40
    • 3.3/5,6/28
    • 3.3/5,7/16
    • 3.3/5,7/28.5
    • 3.3/5,7/34
    • 3.3/5,8/35
    • 3.5
    • 3.7
    • 3.8/16
    • 3/10
    • 3/18,4/18
    • 3/3.3
    • 3/3.3,3/5
    • 3/5
    • 3/5.5
    • 3/6
    • 3/6.5
    • 3/9
    • 35
    • 4.2
    • 4.3
    • 4.5
    • 4.5,5
    • 4.5/13
    • 4.5/18
    • 4.75/30
    • 4/12
    • 4/18
    • 4/24
    • 4/28,5
    • 40
    • 42
    • 48
    • 5
    • 5,10/40
    • 5,10/45
    • 5,10/46
    • 5,12
    • 5,15
    • 5,16
    • 5,16/42
    • 5,2/15
    • 5,20
    • 5,24
    • 5,27
    • 5,30
    • 5,32
    • 5,36
    • 5,38
    • 5,40
    • 5,42
    • 5,45
    • 5,5/50
    • 5,50
    • 5,6.5/29
    • 5,6/30
    • 5,7/36
    • 5,7/50
    • 5,8
    • 5,8/16
    • 5,8/24
    • 5,8/40
    • 5.5/18
    • 5.5/29
    • 5.9/45
    • 5/10
    • 5/12
    • 5/16
    • 5/28
    • 5/36
    • 5/50
    • 5/6
    • 50
    • 6
    • 6,12
    • 6.3
    • 6.5/15.5
    • 6.5/18.5
    • 6.5/29
    • 6.5/45
    • 6.7
    • 6/10
    • 6/14
    • 6/16
    • 6/17
    • 6/18
    • 6/25
    • 6/29
    • 6/30
    • 6/35
    • 6/45
    • 7
    • 7,15
    • 7.2
    • 7.5
    • 7.5,48
    • 7/16
    • 7/18
    • 7/26
    • 7/38
    • 7/40
    • 7/45
    • 7/60
    • 8
    • 8.2/45
    • 8.2/60
    • 8/16
    • 8/18
    • 8/20
    • 8/27
    • 8/28
    • 8/32
    • 8/36
    • 8/38
    • 8/40
    • 8/45
    • 8/60
    • 9
    • 9,12
    • 9/15
    • 9/16
    • 9/17
    • 9/18
Package Style (Meter)
    • CHIP CARRIER
    • CHIP CARRIER, HEAT SINK/SLUG
    • CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
    • CHIP CARRIER, VERY THIN PROFILE
    • CYLINDRICAL
    • FLANG MOUNT
    • FLANGE MOUNT
    • FLATPACK
    • FLATPACK, BUMPER, LOW PROFILE, FINE PITCH
    • FLATPACK, FINE PITCH
    • FLATPACK, HEAT SINK/SLUG
    • FLATPACK, HEAT SINK/SLUG, LOW PROFILE
    • FLATPACK, HEAT SINK/SLUG, LOW PROFILE, FINE PITCH
    • FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH
    • FLATPACK, LOW PROFILE
    • FLATPACK, LOW PROFILE, FINE PITCH
    • FLATPACK, THIN PROFILE
    • FLATPACK, THIN PROFILE, FINE PITCH
    • GRID ARRAY
    • GRID ARRAY, FINE PITCH
    • GRID ARRAY, THIN PROFILE, FINE PITCH
    • GRID ARRAY, ULTRA THIN PROFILE, FINE PITCH
    • GRID ARRAY, VERY THIN PROFILE
    • GRID ARRAY, VERY THIN PROFILE, FINE PITCH
    • IN-LINE
    • IN-LINE, HEAT SINK/SLUG
    • IN-LINE, HEAT SINK/SLUG, SHRINK PITCH
    • IN-LINE, SHRINK PITCH
    • MICROELECTRONIC ASSEMBLY
    • SMALL OUTLINE
    • SMALL OUTLINE, HEAT SINK/SLUG
    • SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE
    • SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE, SHRINK PITCH
    • SMALL OUTLINE, HEAT SINK/SLUG, SHRINK PITCH
    • SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE
    • SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH
    • SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE
    • SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE, SHRINK PITCH
    • SMALL OUTLINE, LOW PROFILE
    • SMALL OUTLINE, LOW PROFILE, SHRINK PITCH
    • SMALL OUTLINE, SHRINK PITCH
    • SMALL OUTLINE, THIN PROFILE
    • SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
    • SMALL OUTLINE, VERY THIN PROFILE
    • SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH
    • UNCASED CHIP
Package Equivalence Code
    • BGA10,2X5,20
    • BGA11,3X7,11
    • BGA144,12X12,40
    • BGA18,3X6,16
    • BGA32,6X6,16
    • BGA36,6X7,16
    • BGA49,7X7,25
    • BGA6,2X3,16
    • BGA6,2X3,20
    • BGA64,10X10,20
    • BGA8,2X4,20
    • BGA8,3X3,20
    • BGA9,3X3,16
    • BGA9,3X3,20
    • DIP10,.3
    • DIP12/16,.3TB
    • DIP14,.3
    • DIP16,.3
    • DIP18,.3
    • DIP20,.3
    • DIP20,.5
    • DIP20,.6
    • DIP22,.4
    • DIP24,.3
    • DIP24,.5
    • DIP24,.6
    • DIP26(UNSPEC)
    • DIP28,.3
    • DIP28,.6
    • DIP30,.4
    • DIP36/44,2
    • DIP37/44,2
    • DIP39(UNSPEC)
    • DIP40,.6
    • DIP8,.3
    • FFC,16PADS
    • FL34,2,150
    • FL34,2,150FL
    • FL6,.047,20
    • FL6,.1,60
    • FL8,.1,25
    • FL8,.12,25
    • FLIP CHIP
    • GWHDIP20,.67
    • HDIP20,.6
    • HQFP48,.28SQ
    • HQFP48,.35SQ,20
    • HQFP48,.47SQ
    • HQFP64,.40SQ,20
    • HQFP74,.75X1.0,32
    • LCC10,.06X.07,16
    • LCC12,.12SQ,20
    • LCC14,.12X.18(UNSPEC)
    • LCC16(UNSPEC)
    • LCC16,.10SQ,20
    • LCC16,.11SQ,20
    • LCC16,.12SQ,20
    • LCC16,.16SQ,25
    • LCC16,.1SQ,20
    • LCC16,.20SQ,32
    • LCC16,4SQ,25
    • LCC18/24,.16SQ,20
    • LCC20,.11SQ,16
    • LCC20,.12SQ,20
    • LCC20,.16SQ,20
    • LCC20,.35SQ
    • LCC24(UNSPEC)
    • LCC24,.12SQ,16
    • LCC24,.13SQ,16
    • LCC24,.13SQ,20
    • LCC24,.15SQ,20
    • LCC24,.16SQ,20
    • LCC24,.19SQ,20
    • LCC24,.20SQ,25
    • LCC24/28,.14X.2,20
    • LCC26,.20SQ,20
    • LCC27(UNSPEC)
    • LCC28,.14SQ,16
    • LCC28,.16SQ,16
    • LCC28,.16X.2,20
    • LCC28,.25SQ,25
    • LCC28,.2SQ,20
    • LCC28,.45SQ
    • LCC29(UNSPEC)
    • LCC32(UNSPEC)
    • LCC32,.16SQ,16
    • LCC32,.27SQ,25
    • LCC32,.2SQ,16
    • LCC32,.2SQ,20
    • LCC32,.32SQ,32
    • LCC36(UNSPEC)
    • LCC36,.16X.2,16
    • LCC36,.25SQ,20
    • LCC36,.2SQ,20
    • LCC36,.35SQ,32
    • LCC37(UNSPEC)
    • LCC38,.2X.27,20
    • LCC39(UNSPEC)
    • LCC40,.15,20
    • LCC40,.19X.27,20
    • LCC40,.24SQ,20
    • LCC40,.25SQ,20
    • LCC40,.2SQ,16
    • LCC40,.2X.27,20
    • LCC40,.2X.28,20
    • LCC44,.24SQ,16
    • LCC44,.28SQ,20
    • LCC44,.2SQ,16
    • LCC47/56,.31SQ,20
    • LCC48,.27SQ,20
    • LCC48,.28SQ,20
    • LCC48,.35SQ,25
    • LCC52,.28SQ,16
    • LCC52,.31SQ,20
    • LCC56,.31SQ,20
    • LCC64,.35SQ,20
    • LCC8,.08SQ,25
    • LDCC20,.4SQ
    • LDCC28,.5SQ
    • LDCC44,.7SQ
    • LDCC52,.8SQ
    • LDCC68,1.0SQ
    • LGA6,2X3,16
    • LGA64,8X8,25
    • LGA68,11X11,20
    • MODULE(UNSPEC)
    • MODULE,10LEAD,4.3
    • MODULE,18LEAD,2.6
    • MODULE,19LEAD,1.4
    • MODULE,20LEAD,1.0
    • MODULE,20LEAD,1.5
    • MODULE,22LEAD,4.3
    • MODULE,23LEAD(UNSPEC)
    • MODULE,23LEAD,.55
    • MODULE,23LEAD,.6
    • MODULE,23LEAD,0.7
    • MODULE,23LEAD,1.05
    • MODULE,24LEAD(UNSPEC)
    • MODULE,24LEAD,1.19
    • MODULE,25LEAD(UNSPEC)
    • MODULE,25LEAD,1.1
    • MODULE,26LEAD,.67
    • MODULE,26LEAD,1.1
    • MODULE,27LEAD,1.2
    • MODULE,27LEAD,1.6
    • MODULE,29LEAD,1.4
    • MODULE,30LEAD,1.4
    • MODULE,32LEAD,1.4
    • MODULE,34LEAD,1.3
    • MODULE,37LEAD,.48
    • MODULE,39LEAD,1.4
    • MODULE,40LEAD,.5SQ
    • MODULE,42LEAD,1.4
    • QFP100,.63SQ,20
    • QFP144,.87SQ,20
    • QFP30/36,.54SQ,40
    • QFP32,.35SQ,32
    • QFP36,.5SQ,40
    • QFP44,.47SQ,32
    • QFP44,.5SQ,32
    • QFP44,.63SQ,40
    • QFP44,.7SQ,32
    • QFP48,.35SQ,20
    • QFP48,.6SQ,32
    • QFP52,.47SQ
    • QFP52,.52SQ
    • QFP64,.35SQ,16
    • QFP64,.47SQ,20
    • QFP64,.5SQ
    • QFP64,.66SQ,32
    • QFP64,.7X.95,40
    • QFP64,.9,40
    • QFP80,.7X.9,32
    • QUIP20/27A,.9/1.2,100/67
    • SDIP10,.3
    • SDIP24,.3
    • SDIP28,.5
    • SDIP30,.4
    • SDIP32,.4
    • SDIP42,.6
    • SIP10,.05
    • SIP10,.06
    • SIP10,.07TB
    • SIP11/12,.11,79
    • SIP12,.06TB
    • SIP12,.07
    • SIP12,.07TB
    • SIP12,.1,78
    • SIP12,.11,79
    • SIP12,.11,79TB
    • SIP12,.1TB
    • SIP12H,1.1,79
    • SIP13,.05,79
    • SIP15,.1,50TB
    • SIP15,.1,79
    • SIP16,.1
    • SIP16,.11
    • SIP18/22H,1.3FL
    • SIP22,.11,80
    • SIP23H,1.1,79
    • SIP28,.11,79
    • SIP28,.11,79TB
    • SIP3,.05,90
    • SIP3,.06,60
    • SIP4,.03,50
    • SIP4,.04,50
    • SIP4,.04,70
    • SIP5,.02,37
    • SIP5,.03,37
    • SIP5,.04,50TB
    • SIP5,.05,78
    • SIP5,.1,67TB
    • SIP7,.05
    • SIP7,.05TB
    • SIP7,.07TB
    • SIP7,.1
    • SIP7,.1,50TB
    • SIP7/15,.1,50TB
    • SIP8,.1TB
    • SIP9,.03TB
    • SIP9,.05
    • SIP9,.06
    • SIP9,.07TB
    • SIP9,.1
    • SIP9,.1TB
    • SMSIP22H,.2
    • SMSIP7H,.4,50TB
    • SMSIP7H,.55,50TB
    • SOLCC10,.08,20
    • SOLCC10,.1,20
    • SOLCC10,.11,20
    • SOLCC10,.11,24
    • SOLCC12,.08,20
    • SOLCC12,.11SQ
    • SOLCC6,.08,25
    • SOLCC8(UNSPEC)
    • SOLCC8,.06,20
    • SOLCC8,.08,20
    • SOLCC8,.12,20
    • SOLCC8,.12,25
    • SOP10,.24,40
    • SOP10,.25,40
    • SOP14,.25
    • SOP14,.25,40
    • SOP16,.25
    • SOP16,.25,32
    • SOP16,.25,40
    • SOP16,.3
    • SOP16,.31,26
    • SOP16,.37,40
    • SOP16,.4
    • SOP16,.55,32
    • SOP16/24,.3,40
    • SOP16/24,.37,40
    • SOP18,.25,32
    • SOP20,.3
    • SOP20,.4
    • SOP20,.45
    • SOP20,.56
    • SOP20/24,.54,30
    • SOP22,.3
    • SOP24,.3
    • SOP24,.3,25
    • SOP24,.3,32
    • SOP24,.3,40
    • SOP24,.4
    • SOP24,.4,32
    • SOP28,.4
    • SOP28,.46,40
    • SOP28,.5,32
    • SOP28/34,.4,32
    • SOP28/36,.3,32
    • SOP28/36,.4,32
    • SOP28/38,.47,32
    • SOP28/42,.4,32
    • SOP30,.3,32
    • SOP30,.4,40
    • SOP30,.47,40
    • SOP30,.56,106/40
    • SOP30,.57,32
    • SOP30,.57,40
    • SOP30,.75,40
    • SOP31,.5,32
    • SOP31/42,.47,32
    • SOP32,.3,32
    • SOP32,.4,32
    • SOP34,.4,32
    • SOP34,.5,32
    • SOP36,.3,32
    • SOP36,.4
    • SOP36,.4,32
    • SOP36,.47,32
    • SOP36/44,.4,32
    • SOP42,.4,32
    • SOP42,.5,32
    • SOP44,.4,32
    • SOP8,.24,40
    • SOP8,.25
    • SOP8,.4
    • SSOP14/20,.25
    • SSOP16,.25
    • SSOP16,.3,20
    • SSOP20,.25
    • SSOP20,.25,20
    • SSOP20,.47,39
    • SSOP24,..4,50
    • SSOP24,.24
    • SSOP24,.25
    • SSOP24,.25,20
    • SSOP24,.3
    • SSOP24,.4,20
    • SSOP28,.25
    • SSOP30,.25,20
    • SSOP30,.3
    • SSOP30,.75,40
    • SSOP32,.4
    • SSOP36(UNSPEC)
    • SSOP36,.4
    • SSOP36,.4,20
    • SSOP36,.5
    • SSOP36,.56
    • SSOP36/48,.48
    • SSOP38,.3
    • SSOP40,.3
    • SSOP44,.3
    • SSOP48,.4
    • SSOP48,.48
    • SSOP48/54,.4
    • SSOP54,.4
    • SSOP8,.19
    • TO-243,5 LEAD
    • TQFP32,.35SQ,32
    • TQFP48,.35SQ
    • TQFP64,.35SQ,16
    • TQFP64,.47SQ
    • TQFP80,.55SQ
    • TSOP28,.25,25
    • TSOP5/6,.11,37
    • TSOP6,.11,37
    • TSSOP10,.19,20
    • TSSOP12,.19,20
    • TSSOP14,.25
    • TSSOP14/20,.25
    • TSSOP16,.12,20
    • TSSOP16,.25
    • TSSOP20,.25
    • TSSOP20,.25,20
    • TSSOP24,.25
    • TSSOP24,.25,20
    • TSSOP24,.3
    • TSSOP28(UNSPEC)
    • TSSOP28,.19,20
    • TSSOP28,.25
    • TSSOP30,.3
    • TSSOP36,.3,20
    • TSSOP38,.25,20
    • TSSOP38,.32
    • TSSOP44,.29
    • TSSOP44,.32
    • TSSOP44,.33
    • TSSOP48,.3,20
    • TSSOP56,.3,20
    • TSSOP8,.19
    • TSSOP8,.25
    • ZIP11,.2,.17,67TB
    • ZIP12,.08,.08,70TB
    • ZIP12,.08,.1,70TB
    • ZIP13/19,.15,.16,40FL
    • ZIP14,.06,.09,70
    • ZIP15,.1,.14TB
    • ZIP15,.1,.1TB
    • ZIP15,.16,80
    • ZIP15,.2,.17TB
    • ZIP15H,.1,.8TB
    • ZIP18,.16,66TB
    • ZIP18,.2TB
    • ZIP18/22,.18,.14,100FL
    • ZIP18/22,.2,.4,100FL
    • ZIP19,.15,.16,40FL
    • ZIP19,.16,40
    • ZIP19/23,.2,.1,78FL
    • ZIP19/23H,.2,.1,78FL
    • ZIP19/23H,.2,1,78FL
    • ZIP19/24,.19,.12,79TB
    • ZIP19H,.15,.64,40
    • ZIP20,.1
    • ZIP20/24,.19,.12,80TB
    • ZIP20/24H,.19,1.3,80TB
    • ZIP21,.1
    • ZIP21/29,.2,.12FL
    • ZIP21/29H,.2,.12FL
    • ZIP21/29H,.2,1.1FL
    • ZIP23,.09TB
    • ZIP23,.2TB
    • ZIP23H,.09,.6TB
    • ZIP23H,.1,.7TB
    • ZIP25,.08
    • ZIP25,.08,.1
    • ZIP25,.16,.16,40
    • ZIP25/35H,.2,1.13FL
    • ZIP25H,.14,.7,40
    • ZIP5,.15,.2,67TB
    • ZIP5H,.15,.7,67TB
    • ZIP7,.12,.17TB
    • ZIP7,.15,.2TB
    • ZIP7H,.16,.7TB
    • sop14,.23
    • sop20,.25,20
Sub-Category
    • Automotive Circuits
    • Motion Control Electronics
    • Other Analog ICs
    • Switching Regulator or Controllers
Terminal Pitch
    • .4 mm
    • .5 mm
    • .6 mm
    • .635 mm
    • .65 mm
    • .75 mm
    • .8 mm
    • .89 mm
    • .95 mm
    • 1 mm
    • 1.016 mm
    • 1.27 mm
    • 1.4 mm
    • 1.5 mm
    • 1.65 mm
    • 1.7 mm
    • 1.778 mm
    • 1.78 mm
    • 1.8 mm
    • 1.98 mm
    • 2 mm
    • 2.03 mm
    • 2.2 mm
    • 2.3 mm
    • 2.54 mm
    • 3 mm
    • 3.81 mm
    • 3.9 mm
Maximum Operating Temperature
    • 100 Cel
    • 105 Cel
    • 110 Cel
    • 115 Cel
    • 120 Cel
    • 125 Cel
    • 130 Cel
    • 135 Cel
    • 145 Cel
    • 150 Cel
    • 175 Cel
    • 45 Cel
    • 50 Cel
    • 55 Cel
    • 60 Cel
    • 65 Cel
    • 70 Cel
    • 75 Cel
    • 80 Cel
    • 85 Cel
    • 90 Cel
    • 95 Cel
Minimum Operating Temperature
    • -10 Cel
    • -15 Cel
    • -20 Cel
    • -25 Cel
    • -30 Cel
    • -35 Cel
    • -40 Cel
    • -45 Cel
    • -5 Cel
    • -55 Cel
    • 0 Cel
Terminal Finish
    • COPPER NICKEL PALLADIUM
    • GOLD
    • MATTE TIN
    • MATTE TIN OVER NICKEL
    • Matte Tin (Sn)
    • Matte Tin (Sn) - annealed
    • NICKEL
    • NICKEL GOLD PALLADIUM
    • NICKEL GOLD PALLADIUM SILVER
    • NICKEL PALLADIUM GOLD
    • NICKEL PALLADIUM GOLD SILVER
    • Nickel/Gold/Palladium/Silver (Ni/Au/Pd/Ag)
    • Nickel/Palladium/Gold (Ni/Pd/Au)
    • Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag)
    • TIN
    • TIN BISMUTH
    • TIN COPPER
    • TIN COPPER/TIN SILVER
    • TIN LEAD
    • TIN NICKEL
    • TIN NICKEL COPPER
    • TIN SILVER
    • TIN SILVER COPPER
    • TIN/NICKEL PALLADIUM GOLD
    • TIN/TIN COPPER
    • Tin (Sn)
    • Tin/Bismuth (Sn/Bi)
    • Tin/Copper (Sn/Cu)
    • Tin/Lead (Sn/Pb)
    • Tin/Lead (Sn85Pb15)
    • Tin/Nickel (Sn/Ni)
    • Tin/Nickel/Copper (Sn/Ni/Cu)
    • Tin/Silver (Sn/Ag)
    • Tin/Silver/Copper (Sn/Ag/Cu)
Maximum Output Voltage
    • 20 V
    • 3.6 V
    • 5.3 V
    • 5.5 V
    • 50 V
Terminal Position
    • BOTTOM
    • DUAL
    • QUAD
    • SINGLE
    • UNSPECIFIED
    • UPPER
    • ZIG-ZAG
JESD-30 Code
    • O-MBCY-W3
    • O-PBCY-T3
    • O-XXMA-X
    • R-CDFM-T26
    • R-CDFP-F52
    • R-CDIP-T18
    • R-CDIP-T24
    • R-GDIP-T16
    • R-GDIP-T18
    • R-GDIP-T20
    • R-GDIP-T24
    • R-GDIP-T28
    • R-MDFM-F43
    • R-MDFM-X24
    • R-PBGA-B10
    • R-PBGA-B18
    • R-PBGA-B32
    • R-PBGA-B36
    • R-PBGA-B6
    • R-PBGA-B8
    • R-PBGA-B9
    • R-PDFM-F34
    • R-PDFM-F43
    • R-PDFM-T26
    • R-PDFP-F34
    • R-PDFP-F43
    • R-PDFP-F8
    • R-PDIP-T10
    • R-PDIP-T12
    • R-PDIP-T14
    • R-PDIP-T16
    • R-PDIP-T18
    • R-PDIP-T20
    • R-PDIP-T22
    • R-PDIP-T23
    • R-PDIP-T24
    • R-PDIP-T25
    • R-PDIP-T26
    • R-PDIP-T28
    • R-PDIP-T30
    • R-PDIP-T32
    • R-PDIP-T34
    • R-PDIP-T39
    • R-PDIP-T40
    • R-PDIP-T42
    • R-PDIP-T56
    • R-PDIP-T8
    • R-PDMA-G26
    • R-PDMA-T24
    • R-PDMA-T25
    • R-PDMA-T26
    • R-PDMA-T37
    • R-PDSO-F5
    • R-PDSO-F6
    • R-PDSO-F8
    • R-PDSO-G10
    • R-PDSO-G12
    • R-PDSO-G14
    • R-PDSO-G16
    • R-PDSO-G18
    • R-PDSO-G20
    • R-PDSO-G22
    • R-PDSO-G23
    • R-PDSO-G24
    • R-PDSO-G25
    • R-PDSO-G26
    • R-PDSO-G28
    • R-PDSO-G30
    • R-PDSO-G31
    • R-PDSO-G32
    • R-PDSO-G34
    • R-PDSO-G36
    • R-PDSO-G38
    • R-PDSO-G40
    • R-PDSO-G42
    • R-PDSO-G44
    • R-PDSO-G48
    • R-PDSO-G5
    • R-PDSO-G52
    • R-PDSO-G54
    • R-PDSO-G56
    • R-PDSO-G6
    • R-PDSO-G8
    • R-PDSO-N10
    • R-PDSO-N12
    • R-PDSO-N22
    • R-PDSO-N28
    • R-PDSO-N8
    • R-PQCC-J44
    • R-PQCC-N14
    • R-PQCC-N16
    • R-PQCC-N24
    • R-PQCC-N28
    • R-PQCC-N36
    • R-PQCC-N40
    • R-PQFP-B28
    • R-PQFP-B44
    • R-PQFP-G32
    • R-PQFP-G44
    • R-PQFP-G64
    • R-PQFP-G80
    • R-PQMA-N31
    • R-PQMA-N37
    • R-PSFM-P10
    • R-PSFM-T10
    • R-PSFM-T12
    • R-PSFM-T15
    • R-PSFM-T20
    • R-PSFM-T22
    • R-PSFM-T23
    • R-PSFM-T3
    • R-PSFM-T5
    • R-PSFM-T7
    • R-PSFM-T9
    • R-PSIP-T10
    • R-PSIP-T12
    • R-PSIP-T22
    • R-PSIP-T23
    • R-PSIP-T28
    • R-PSIP-T3
    • R-PSIP-T4
    • R-PSIP-T5
    • R-PSIP-T7
    • R-PSIP-T8
    • R-PSIP-T9
    • R-PSSO-G15
    • R-PSSO-G16
    • R-PSSO-G6
    • R-PSSO-G7
    • R-PXFM-T26
    • R-PXMA-N32
    • R-PZFM-G19
    • R-PZFM-T12
    • R-PZFM-T15
    • R-PZFM-T18
    • R-PZFM-T20
    • R-PZFM-T21
    • R-PZFM-T23
    • R-PZFM-T24
    • R-PZFM-T25
    • R-PZFM-T7
    • R-PZIP-T11
    • R-PZIP-T14
    • R-PZIP-T15
    • R-PZIP-T18
    • R-PZIP-T19
    • R-PZIP-T20
    • R-PZIP-T21
    • R-PZIP-T23
    • R-PZIP-T25
    • R-PZIP-T26
    • R-PZIP-T5
    • R-PZIP-T7
    • R-PZMA-T26
    • R-XBCC-B6
    • R-XBGA-B
    • R-XBGA-B6
    • R-XBGA-N6
    • R-XDFM-F43
    • R-XDFM-G23
    • R-XDFM-T19
    • R-XDFM-T20
    • R-XDFM-T21
    • R-XDFM-T24
    • R-XDFM-T25
    • R-XDFM-T26
    • R-XDFM-T27
    • R-XDFM-T30
    • R-XDFM-T31
    • R-XDFM-T38
    • R-XDFM-T39
    • R-XDFM-X19
    • R-XDFM-X20
    • R-XDFM-X24
    • R-XDFM-X26
    • R-XDFM-X34
    • R-XDIP-T28
    • R-XDIP-T39
    • R-XDMA-G23
    • R-XDMA-G26
    • R-XDMA-P18
    • R-XDMA-P26
    • R-XDMA-P29
    • R-XDMA-P31
    • R-XDMA-P38
    • R-XDMA-T14
    • R-XDMA-T20
    • R-XDMA-T21
    • R-XDMA-T22
    • R-XDMA-T23
    • R-XDMA-T24
    • R-XDMA-T25
    • R-XDMA-T26
    • R-XDMA-T27
    • R-XDMA-T29
    • R-XDMA-T30
    • R-XDMA-T31
    • R-XDMA-T32
    • R-XDMA-T34
    • R-XDMA-T36
    • R-XDMA-T37
    • R-XDMA-T39
    • R-XDMA-T42
    • R-XDMA-X20
    • R-XDSO-F5
    • R-XQCC-N12
    • R-XQCC-N28
    • R-XQCC-N32
    • R-XQCC-N36
    • R-XQCC-N38
    • R-XQCC-N39
    • R-XQCC-N48
    • R-XQCC-N89
    • R-XSFM-P18
    • R-XSFM-T12
    • R-XSFM-T15
    • R-XSFM-T18
    • R-XSFM-T19
    • R-XSFM-T20
    • R-XSFM-T21
    • R-XSFM-T23
    • R-XSFM-T28
    • R-XSFM-T7
    • R-XSFM-T8
    • R-XSIP-T4
    • R-XSIP-T5
    • R-XSMA-T21
    • R-XUFM-P26
    • R-XUFM-T29
    • R-XUFM-X10
    • R-XUFM-X20
    • R-XUFM-X25
    • R-XUFM-X36
    • R-XUFM-X8
    • R-XXFM-P26
    • R-XXFM-T24
    • R-XXFM-X
    • R-XXFM-X19
    • R-XXFM-X22
    • R-XXMA-T23
    • R-XXMA-T25
    • R-XXMA-T27
    • R-XXMA-T42
    • R-XXMA-X
    • R-XXMA-X11
    • R-XXMA-X13
    • R-XXMA-X19
    • R-XXMA-X20
    • R-XXMA-X22
    • R-XXMA-X25
    • R-XXMA-X26
    • R-XZFM-P29
    • R-XZFM-T12
    • R-XZFM-T13
    • R-XZFM-T15
    • R-XZFM-T18
    • R-XZFM-T19
    • R-XZFM-T21
    • R-XZFM-T23
    • R-XZFM-T24
    • R-XZFM-T25
    • R-XZFM-T26
    • R-XZFM-T27
    • R-XZFM-T29
    • R-XZFM-T35
    • R-XZIP-T14
    • R-XZIP-T25
    • R-XZMA-T20
    • R-XZMA-T23
    • R-XZMA-T25
    • R-XZMA-T26
    • S-CQCC-N20
    • S-CQCC-N28
    • S-PBCC-N39
    • S-PBGA-B144
    • S-PBGA-B32
    • S-PBGA-B49
    • S-PBGA-B64
    • S-PBGA-B8
    • S-PBGA-B9
    • S-PBGA-N64
    • S-PBGA-N68
    • S-PDSO-F8
    • S-PDSO-G10
    • S-PDSO-G8
    • S-PDSO-N10
    • S-PDSO-N12
    • S-PDSO-N6
    • S-PDSO-N8
    • S-PQCC-J20
    • S-PQCC-J28
    • S-PQCC-J44
    • S-PQCC-J52
    • S-PQCC-J68
    • S-PQCC-N10
    • S-PQCC-N12
    • S-PQCC-N16
    • S-PQCC-N18
    • S-PQCC-N20
    • S-PQCC-N24
    • S-PQCC-N27
    • S-PQCC-N28
    • S-PQCC-N32
    • S-PQCC-N36
    • S-PQCC-N40
    • S-PQCC-N44
    • S-PQCC-N48
    • S-PQCC-N52
    • S-PQCC-N56
    • S-PQCC-N8
    • S-PQFP-G100
    • S-PQFP-G144
    • S-PQFP-G28
    • S-PQFP-G30
    • S-PQFP-G32
    • S-PQFP-G44
    • S-PQFP-G48
    • S-PQFP-G52
    • S-PQFP-G60
    • S-PQFP-G64
    • S-PQFP-G80
    • S-PQMA-N27
    • S-PQMA-N36
    • S-PQMA-N37
    • S-PQMA-N40
    • S-PXMA-N30
    • S-XBGA-B9
    • S-XDMA-P15
    • S-XDMA-P19
    • S-XDSO-N10
    • S-XQCC-N16
    • S-XQCC-N20
    • S-XQCC-N24
    • S-XQCC-N26
    • S-XQCC-N27
    • S-XQCC-N28
    • S-XQCC-N32
    • S-XQCC-N36
    • S-XQCC-N38
    • S-XQCC-N40
    • S-XQCC-N44
    • S-XQCC-N47
    • S-XQCC-N48
    • S-XQCC-N52
    • S-XQCC-N64
    • S-XQCC-N8
    • S-XQFP-G48
    • S-XQFP-G64
    • S-XUUC-N10
    • S-XZFM-T18
    • X-XUUC-N
    • X-XUUC-N15
Moisture Sensitivity Level (MSL)
    • 1
    • 2
    • 2A
    • 3
    • 4
    • 5
    • NOT APPLICABLE
Maximum Supply Voltage (Vsup)
    • 1.9 V
    • 1.98 V
    • 10 V
    • 10.5 V
    • 10.8 V
    • 100 V
    • 11 V
    • 12 V
    • 12.5 V
    • 13 V
    • 13.2 V
    • 13.5 V
    • 13.6 V
    • 13.8 V
    • 14 V
    • 14.4 V
    • 14.5 V
    • 15 V
    • 15.5 V
    • 15.6 V
    • 16 V
    • 16.5 V
    • 16.8 V
    • 17 V
    • 17.25 V
    • 17.5 V
    • 18 V
    • 18.5 V
    • 19 V
    • 2.7 V
    • 20 V
    • 200 V
    • 21 V
    • 22 V
    • 24 V
    • 240 V
    • 242 V
    • 25 V
    • 26 V
    • 26.4 V
    • 26.5 V
    • 264 V
    • 27 V
    • 27.6 V
    • 28 V
    • 29 V
    • 3.3 V
    • 3.5 V
    • 3.6 V
    • 3.63 V
    • 30 V
    • 31 V
    • 32 V
    • 33 V
    • 34 V
    • 34.5 V
    • 35 V
    • 36 V
    • 37 V
    • 37.5 V
    • 38 V
    • 39 V
    • 4 V
    • 4.3 V
    • 4.5 V
    • 4.8 V
    • 40 V
    • 400 V
    • 42 V
    • 44 V
    • 45 V
    • 450 V
    • 46 V
    • 46.2 V
    • 47 V
    • 48 V
    • 5 V
    • 5.15 V
    • 5.2 V
    • 5.25 V
    • 5.3 V
    • 5.5 V
    • 5.6 V
    • 5.7 V
    • 5.75 V
    • 50 V
    • 500 V
    • 52 V
    • 52.5 V
    • 528 V
    • 55 V
    • 59 V
    • 6 V
    • 6.5 V
    • 6.7 V
    • 6.8 V
    • 60 V
    • 65 V
    • 7 V
    • 7.2 V
    • 7.5 V
    • 7.6 V
    • 75 V
    • 77 V
    • 8 V
    • 8.6 V
    • 800 V
    • 9 V
    • 9.5 V
    • 90 V
Maximum Seated Height
    • .212 mm
    • .3 mm
    • .33 mm
    • .36 mm
    • .55 mm
    • .56 mm
    • .6 mm
    • .625 mm
    • .63 mm
    • .64 mm
    • .65 mm
    • .69 mm
    • .75 mm
    • .8 mm
    • .85 mm
    • .9 mm
    • .93 mm
    • .95 mm
    • 1 mm
    • 1.03 mm
    • 1.05 mm
    • 1.06 mm
    • 1.07 mm
    • 1.08 mm
    • 1.1 mm
    • 1.15 mm
    • 1.2 mm
    • 1.25 mm
    • 1.28 mm
    • 1.35 mm
    • 1.4 mm
    • 1.45 mm
    • 1.5 mm
    • 1.55 mm
    • 1.6 mm
    • 1.65 mm
    • 1.7 mm
    • 1.71 mm
    • 1.73 mm
    • 1.75 mm
    • 1.753 mm
    • 1.8 mm
    • 1.85 mm
    • 1.879 mm
    • 1.9 mm
    • 1.92 mm
    • 10.16 mm
    • 12.1 mm
    • 12.19 mm
    • 128 mm
    • 13.2 mm
    • 13.34 mm
    • 14.5 mm
    • 14.55 mm
    • 15.7 mm
    • 16.3 mm
    • 16.5 mm
    • 17.3 mm
    • 17.6 mm
    • 18.2 mm
    • 19.37 mm
    • 2 mm
    • 2.005 mm
    • 2.03 mm
    • 2.05 mm
    • 2.1 mm
    • 2.11 mm
    • 2.135 mm
    • 2.15 mm
    • 2.2 mm
    • 2.3 mm
    • 2.35 mm
    • 2.4 mm
    • 2.45 mm
    • 2.47 mm
    • 2.5 mm
    • 2.54 mm
    • 2.55 mm
    • 2.59 mm
    • 2.64 mm
    • 2.6416 mm
    • 2.642 mm
    • 2.65 mm
    • 2.7 mm
    • 2.72 mm
    • 2.75 mm
    • 2.79 mm
    • 2.85 mm
    • 2.9 mm
    • 2.92 mm
    • 23 mm
    • 24 mm
    • 27 mm
    • 273 mm
    • 29.1 mm
    • 3 mm
    • 3.1 mm
    • 3.15 mm
    • 3.3 mm
    • 3.35 mm
    • 3.4 mm
    • 3.45 mm
    • 3.5 mm
    • 3.55 mm
    • 3.6 mm
    • 3.8 mm
    • 3.85 mm
    • 3.9 mm
    • 3.93 mm
    • 3.94 mm
    • 32.5 mm
    • 4 mm
    • 4.07 mm
    • 4.2 mm
    • 4.25 mm
    • 4.3 mm
    • 4.32 mm
    • 4.37 mm
    • 4.4 mm
    • 4.44 mm
    • 4.45 mm
    • 4.5 mm
    • 4.57 mm
    • 4.6 mm
    • 4.67 mm
    • 4.69 mm
    • 4.7 mm
    • 4.8 mm
    • 4.83 mm
    • 4.9 mm
    • 5.06 mm
    • 5.08 mm
    • 5.1 mm
    • 5.17 mm
    • 5.25 mm
    • 5.27 mm
    • 5.3 mm
    • 5.33 mm
    • 5.334 mm
    • 5.4 mm
    • 5.405 mm
    • 5.45 mm
    • 5.5 mm
    • 5.6 mm
    • 5.7 mm
    • 5.8 mm
    • 5.84 mm
    • 6 mm
    • 6.45 mm
    • 6.5 mm
    • 7 mm
    • 7.1 mm
    • 7.2 mm
    • 7.3 mm
    • 7.5 mm
    • 7.6 mm
    • 7.7 mm
    • 7.9 mm
    • 8.05 mm
    • 8.1 mm
    • 8.2 mm
    • 8.3 mm
    • 8.4 mm
    • 8.7 mm
    • 8.8 mm
    • 9.2 mm
Width (mm)
    • .68 mm
    • .72 mm
    • .766 mm
    • .77 mm
    • .78 mm
    • .87 mm
    • .965 mm
    • 1.2 mm
    • 1.21 mm
    • 1.44 mm
    • 1.47 mm
    • 1.549 mm
    • 1.55 mm
    • 1.56 mm
    • 1.6 mm
    • 1.62 mm
    • 1.625 mm
    • 1.7 mm
    • 10 mm
    • 10.16 mm
    • 11 mm
    • 11.2 mm
    • 11.4 mm
    • 11.43 mm
    • 11.505 mm
    • 11.5062 mm
    • 11.88 mm
    • 12 mm
    • 12.45 mm
    • 12.7 mm
    • 12.9 mm
    • 14 mm
    • 14.4 mm
    • 15.24 mm
    • 16 mm
    • 16.585 mm
    • 16.5862 mm
    • 16.59 mm
    • 16.66 mm
    • 17.018 mm
    • 17.145 mm
    • 18 mm
    • 18.2 mm
    • 19 mm
    • 19.05 mm
    • 2 mm
    • 2.0125 mm
    • 2.3 mm
    • 2.4 mm
    • 2.45 mm
    • 2.47 mm
    • 2.5 mm
    • 2.55 mm
    • 2.56 mm
    • 2.6 mm
    • 2.7 mm
    • 2.8 mm
    • 20 mm
    • 21 mm
    • 21.8 mm
    • 22 mm
    • 23 mm
    • 24 mm
    • 25.22 mm
    • 26 mm
    • 26.1 mm
    • 26.5 mm
    • 26.7 mm
    • 26.8 mm
    • 27 mm
    • 29.4 mm
    • 3 mm
    • 3.2 mm
    • 3.25 mm
    • 3.3 mm
    • 3.43 mm
    • 3.5 mm
    • 3.9 mm
    • 3.91 mm
    • 3.9116 mm
    • 3.95 mm
    • 31 mm
    • 33 mm
    • 33.5 mm
    • 34 mm
    • 34.8 mm
    • 37.34 mm
    • 4 mm
    • 4.4 mm
    • 4.5 mm
    • 4.6 mm
    • 4.91 mm
    • 45 mm
    • 496 mm
    • 5 mm
    • 5.2 mm
    • 5.3 mm
    • 5.4 mm
    • 5.6 mm
    • 50.8 mm
    • 6 mm
    • 6.1 mm
    • 6.2 mm
    • 6.21 mm
    • 6.4 mm
    • 67 mm
    • 68 mm
    • 7 mm
    • 7.2 mm
    • 7.21 mm
    • 7.49 mm
    • 7.5 mm
    • 7.518 mm
    • 7.5184 mm
    • 7.52 mm
    • 7.6 mm
    • 7.62 mm
    • 7.9 mm
    • 75 mm
    • 8 mm
    • 8.3 mm
    • 8.4 mm
    • 8.41 mm
    • 8.5 mm
    • 8.7 mm
    • 8.8 mm
    • 8.89 mm
    • 8.965 mm
    • 9 mm
    • 9.015 mm
    • 9.2 mm
    • 9.25 mm
    • 9.4 mm
Qualification
    • Not Qualified
    • Qualified
Minimum Supply Voltage (Vsup)
    • .7 V
    • .8 V
    • 0 V
    • 1 V
    • 1.2 V
    • 1.5 V
    • 1.62 V
    • 1.65 V
    • 1.7 V
    • 1.8 V
    • 1.9 V
    • 10 V
    • 10.2 V
    • 10.5 V
    • 10.8 V
    • 11 V
    • 11.5 V
    • 12 V
    • 12.5 V
    • 12.75 V
    • 13 V
    • 13.5 V
    • 14 V
    • 14.5 V
    • 14.6 V
    • 15 V
    • 16 V
    • 17.5 V
    • 18 V
    • 187 V
    • 19 V
    • 2 V
    • 2.1 V
    • 2.2 V
    • 2.3 V
    • 2.4 V
    • 2.5 V
    • 2.65 V
    • 2.7 V
    • 2.75 V
    • 2.8 V
    • 2.97 V
    • 20 V
    • 20.4 V
    • 200 V
    • 21.6 V
    • 28 V
    • 3 V
    • 3.15 V
    • 3.2 V
    • 3.3 V
    • 3.5 V
    • 3.6 V
    • 3.8 V
    • 300 V
    • 323 V
    • 4 V
    • 4.2 V
    • 4.25 V
    • 4.3 V
    • 4.4 V
    • 4.5 V
    • 4.6 V
    • 4.7 V
    • 4.75 V
    • 4.8 V
    • 4.85 V
    • 5 V
    • 5.1 V
    • 5.2 V
    • 5.3 V
    • 5.5 V
    • 5.6 V
    • 5.9 V
    • 6 V
    • 6.1 V
    • 6.2 V
    • 6.4 V
    • 6.5 V
    • 6.7 V
    • 6.8 V
    • 6.9 V
    • 7 V
    • 7.2 V
    • 7.5 V
    • 8 V
    • 8.2 V
    • 8.5 V
    • 9 V
    • 9.5 V
    • 9.6 V
    • 90 V
Additional Features
    • ADDITIONAL 12V SUPPLY REQUIRED
    • ADDITIONAL 2.8V TO 8V POWER SUPPLY ALSO REQUIRED
    • ADDITIONAL 5V TO 50V VBB POWER SUPPLY ALSO REQUIRED
    • ALSO AVAILABLE WITH 3 PHASE INPUT 100 TO 480 +/10%; IOUT=6A
    • ALSO AVAILABLE WITH 10V TO 42V VCC INPUT
    • ALSO CONTROLS DC MOTOR
    • ALSO DRIVES STEPPER MOTOR
    • ALSO HAS INPUT SUPPLY VOLTAGE FROM 187VRMS TO 253 VRMS
    • ALSO HAS INTERNAL LOGIC POWER SUPPLY FROM 4.75V TO 5.25V
    • ALSO HAS SUPPLY VOLTAGE= 3V TO 5.5V
    • ALSO IT CAN CONTROLE DC BRUSH AND STEP MOTOR
    • ALSO NEED MOTOR SUPPLY VOLTAGE 10 TO 38V
    • ALSO NEED SUPPLY 5.5 TO 16V
    • ALSO NEED SUPPLY 50 TO 185V; SEATED HGT-CALCULATED
    • ALSO NEED SUPPLY 50 TO 450V; SEATED HGT-CALCULATED
    • ALSO NEED SUPPLY VCC VOLTAGE 7 TO 18V
    • ALSO NEED SUPPLY VOLTAGE 5.5 TO 22V
    • ALSO NEEDS 4.5V TO 5.25V LOGIC SUPPLY
    • ALSO NEEDS 4.5V TO 5.25V VDD SUPPLY
    • ALSO NEEDS 4.75V TO 5.5V VDD SUPPLY
    • ALSO NEEDS 50V TO 185V VBB SUPPLY; SEATED HGT-CALCULATED
    • ALSO NEEDS 50V TO 400V VBB SUPPLY
    • ALSO NEEDS 50V TO 450V VBB SUPPLY
    • ALSO NEEDS 50V TO 450V VBB SUPPLY; SEATED HGT-CALCULATED
    • ALSO NEEDS A SUPPLY OF 2.7 TO 3.6 VOLTS
    • ALSO NEEDS A SUPPLY OF 4.75 TO 5.25V
    • ALSO NEEDS VCC TO 9 VOLTS SUPPLY
    • ALSO OPEARSTES WITH 4.5V TO 5.5V
    • ALSO OPEARSTES WITH 5.5V TO 6.5V
    • ALSO OPEARTAE WITH (0-11)V MOTOR SUPPLY VOLTAGE
    • ALSO OPERATES AT -20V
    • ALSO OPERATES AT 5 VOLT
    • ALSO OPERATES AT 5V
    • ALSO OPERATES AT 5V NOMINAL SUPPLY
    • ALSO OPERATES AT 5V NOMINAL SUPPLY AND 21 TO 42 VOLT
    • ALSO OPERATES FROM 4.5V TO 40V
    • ALSO OPERATES IN 0 TO 42V SUPPLY, SEATED HT-CALCULATED, SEATED HGT-NOM
    • ALSO OPERATES IN 0 TO 46 SUPPLY
    • ALSO OPERATES IN 0 TO 46 SUPPLY, SEATED HT-CALCULATED, SEATED HGT-NOM
    • ALSO OPERATES IN 0 TO 46V SUPPLY
    • ALSO OPERATES IN 0 TO 46V SUPPLY, SEATED HT-CALCULATED, SEATED HGT-NOM
    • ALSO OPERATES IN 1.5 TO 15V SUPPLY
    • ALSO OPERATES IN 1.5 TO 15V SUPPLY, SEATED HGT-NOM
    • ALSO OPERATES IN 1.6 TO 7.5 SUPPLY, SEATED HT-CALCULATED
    • ALSO OPERATES IN 10 TO 28V SUPPLY
    • ALSO OPERATES IN 10 TO 42 SUPPLY
    • ALSO OPERATES IN 10 TO 42 SUPPLY, SEATED HT-CALCULATED, SEATED HGT-NOM
    • ALSO OPERATES IN 10 TO 42V SUPPLY
    • ALSO OPERATES IN 10 TO 42V SUPPLY, SEATED HT-CALCULATED, SEATED HGT-NOM
    • ALSO OPERATES IN 10 TO 44.5V SUPPLY
    • ALSO OPERATES IN 10 TO 45 SUPPLY
    • ALSO OPERATES IN 10 TO 45 SUPPLY, SEATED HGT-NOM
    • ALSO OPERATES IN 10 TO 45 SUPPLY, SEATED HT-CALCULATED, SEATED HGT-NOM
    • ALSO OPERATES IN 10 TO 45V SUPPLY
    • ALSO OPERATES IN 10 TO 45V SUPPLY, SEATED HGT-NOM
    • ALSO OPERATES IN 10 TO 46 SUPPLY
    • ALSO OPERATES IN 10 TO 46 SUPPLY, SEATED HT-CALCULATED, SEATED HGT-NOM
    • ALSO OPERATES IN 12 V NOMINAL SUPPLY VOLTAGE
    • ALSO OPERATES IN 16 TO 30 SUPPLY
    • ALSO OPERATES IN 16 TO 30 SUPPLY, SEATED HT-CALCULATED, SEATED HGT-NOM
    • ALSO OPERATES IN 18 TO 185V SUPPLY
    • ALSO OPERATES IN 2 TO 10.5V SUPPLY
    • ALSO OPERATES IN 2 TO 15V SUPPLY
    • ALSO OPERATES IN 2 TO 6.5V SUPPLY
    • ALSO OPERATES IN 2 TO 7V
    • ALSO OPERATES IN 2 TO 7V SUPPLY
    • ALSO OPERATES IN 2.2 TO 9V SUPPLY
    • ALSO OPERATES IN 3 TO 15 SUPPLY
    • ALSO OPERATES IN 3 TO 15V SUPPLY
    • ALSO OPERATES IN 3 TO 7.4V SUPPLY
    • ALSO OPERATES IN 3.5 TO 16V SUPPLY
    • ALSO OPERATES IN 4 TO 15V SUPPLY
    • ALSO OPERATES IN 4 TO 16V SUPPLY
    • ALSO OPERATES IN 4.5 TO 5.5V SUPPLY
    • ALSO OPERATES IN 5.5 TO 6.5V SUPPLY
    • ALSO OPERATES IN 5.5 TO 7V SUPPLY
    • ALSO OPERATES IN 6 TO 34V SUPPLY
    • ALSO OPERATES IN 8 TO 17V SUPPLY
    • ALSO OPERATES IN 8 TO 28V SUPPLY
    • ALSO OPERATES IN 9 TO 35V SUPPLY
    • ALSO OPERATES IN 9 TO 55 SUPPLY
    • ALSO OPERATES IN 9.5 TO 30V SUPPLY
    • ALSO OPERATES IN SUPPLY 3 TO 5.5V
    • ALSO OPERATES IN SUPPLY VOLTAGE 4.7 TO 5.4V
    • ALSO OPERATES IN SUPPLY VOLTAGE FROM 4.5 TO 5.5 V
    • ALSO OPERATES WITH 10-42V SUPPLY
    • ALSO OPERATES WITH 10-42V SUPPLY, SEATED HT-CALCULATED, SEATED HGT-NOM
    • ALSO OPERATES WITH 10V TO 42V SUPPLY
    • ALSO OPERATES WITH 3 TO 7.4V SUPPLY
    • ALSO OPERATES WITH 3.9V TO 6V
    • ALSO OPERATES WITH 4.5V TO 5.5V AND REQUIRE 10V TO 45V
    • ALSO OPERATES WITH 5 TO 18V SUPPLY
    • ALSO OPERATES WITH 7V TO 18V
    • ALSO OPERATES WITH RANGE OF 0V TO 5.5V SUPPLY
    • ALSO OPERATES WITH THE RANGE OF 0V TO 11V SUPPLY
    • ALSO OPERATES WITH THE RANGE OF 0V TO 42V SUPPLY
    • ALSO OPERATES WITH THE RANGE OF 0V TO 42V SUPPLY, SEATED HT-CALCULATED
    • ALSO OPERATES WITH THE RANGE OF 0V TO 46V SUPPLY
    • ALSO OPERATES WITH THE RANGE OF 0V TO 46V SUPPLY, SEATED HT-CALCULATED
    • ALSO OPERATES WITH THE RANGE OF 0V TO 5.5V SUPPLY
    • ALSO OPERATES WITH THE RANGE OF 1.5V TO 15V SUPPLY
    • ALSO OPERATES WITH THE RANGE OF 1.8V TO 11V SUPPLY
    • ALSO OPERATES WITH THE RANGE OF 1.9V TO 6.5V SUPPLY
    • ALSO OPERATES WITH THE RANGE OF 10V TO 42V SUPPLY
    • ALSO OPERATES WITH THE RANGE OF 18V TO 185V SUPPLY
    • ALSO OPERATES WITH THE RANGE OF 18V TO 40V SUPPLY
    • ALSO OPERATES WITH THE RANGE OF 2.2V TO 9V SUPPLY
    • ALSO OPERATES WITH THE RANGE OF 2.7V TO 5.5V SUPPLY
    • ALSO OPERATES WITH THE RANGE OF 2V TO 11V SUPPLY
    • ALSO OPERATES WITH THE RANGE OF 2V-6.8V SUPPLY
    • ALSO OPERATES WITH THE RANGE OF 3V TO 40V SUPPLY
    • ALSO OPERATES WITH THE RANGE OF 4.5V TO 18V AND 18V TO 26.5V SUPPLY
    • ALSO OPERATES WITH THE RANGE OF 4.5V TO 18V AND 18V TO 28.5V SUPPLY
    • ALSO OPERATES WITH THE RANGE OF 4.5V TO 5.5V SUPPLY
    • ALSO OPERATES WITH THE RANGE OF 5.5V TO 40V SUPPLY
    • ALSO OPERATES WITH THE RANGE OF 5V-50V SUPPLY
    • ALSO OPERATES WITH THE RANGE OF 6.5V TO 36V SUPPLY
    • ALSO OPERATES WITH THE RANGE OF 8V-35V SUPPLY
    • ALSO OPERATES WITH THE RANGE OF 9.5V TO 35V SUPPLY
    • ALSO OPERATES WITH THE RANGE OF 9V TO 32V SUPPLY, SEATED HT-CALCULATED
    • ALSO REQUIRE 1.8V TO 9V
    • ALSO REQUIRE 10V TO 45V
    • ALSO REQUIRE 13V TO 18.5V SUPPLY
    • ALSO REQUIRE 13V TO 18.5V; 0V TO 400 SUPPLY VOLTAGES
    • ALSO REQUIRE 13V TO 18V; 0V TO 400V SUPPLY
    • ALSO REQUIRE 3.15V TO 5.25V
    • ALSO REQUIRE 5.5V TO 50V
    • ALSO REQUIRE 5V TO 50V
    • ALSO REQUIRE 7.45V TO 45V
    • ALSO REQUIRE 7V TO 50V
    • ALSO REQUIRE MOTOR SUPPLY FROM 10V TO 35V
    • ALSO REQUIRE MOTOR SUPPLY FROM 2.5V TO 15V
    • ALSO REQUIRE MOTOR SUPPLY FROM 4.5V TO 35V
    • ALSO REQUIRE POWER SUPPLY 5.5V TO 40V
    • ALSO REQUIRE SUPPLY UP TO 800V FOR IGBT DRIVING
    • ALSO REQUIRED 10.8V TO 13.2V SUPPLY
    • ALSO REQUIRED 10V TO 38V AND 10V TO 42V
    • ALSO REQUIRED 8 V TO 40 V SUPPLY
    • ALSO REQUIRED BRIDGE SUPPLY VOLTAGE OF 7V TO 28.5V OR 7V TO 34V
    • ALSO REQUIRED LOAD SUPPLY VOLTAGE 8 TO 40 V
    • ALSO REQUIRED LOAD SUPPLY VOLTAGE OF 10V TO 40V
    • ALSO REQUIRED MAIN SUPPLY 4.5 TO 32 V
    • ALSO REQUIRED MAIN SUPPLY 4.5V TO 32V
    • ALSO REQUIRED MOTOR SUPPLY VOLTAGE OF 10V TO 44V
    • ALSO REQUIRED MOTOR SUPPLY VOLTAGE OF 12V TO 50V
    • ALSO REQUIRED SUPPLY VOLTAGE 1.8 TO 9 VOLT
    • ALSO REQUIRED SUPPLY VOLTAGE 6 TO 30V
    • ALSO REQUIRED VBB SUPPLY 7 TO 28V
    • ALSO REQUIRED VBB SUPPLY 7 TO 50V
    • ALSO REQUIRED VBB SUPPLY FROM 7 TO 28V
    • ALSO REQUIRED VCC1 SUPPLY 10 TO 42V
    • ALSO REQUIRES 3.3V TO 5.25V IO SUPPLY VOLTAGE
    • ALSO REQUIRES -10V SUPPLY
    • ALSO REQUIRES -15 V SUPPLY
    • ALSO REQUIRES -2.5V TO -18V SUPPLY; IT CAN ALSO OPERATE FROM A SINGLE 5V TO 36V SUPPLY
    • ALSO REQUIRES -2.5V TO -20V SUPPLY
    • ALSO REQUIRES 10V TO 40V SUPPLY
    • ALSO REQUIRES 10V TO 44V SUPPLY
    • ALSO REQUIRES 10V TO 45V SUPPLY, SEATED HT-CALCULATED, SEATED HGT-NOM
    • ALSO REQUIRES 10V TO 45V VBB SUPPLY
    • ALSO REQUIRES 15V POWER SUPPLY
    • ALSO REQUIRES 15V TO 50V VBB SUPPLY
    • ALSO REQUIRES 2.7V TO 3.6V SUPPLY
    • ALSO REQUIRES 3 VOLTS SUPPLY
    • ALSO REQUIRES 3V TO 50V VBB SUPPLY
    • ALSO REQUIRES 4.5V TO 13.2V SUPPLY
    • ALSO REQUIRES 4.5V TO 45V SUPPLY
    • ALSO REQUIRES 4.75V TO 30V VBB SUPPLY
    • ALSO REQUIRES 4V TO 18V SUPPLY
    • ALSO REQUIRES 5.5V TO 7V SUPPLY
    • ALSO REQUIRES 50V TO 185V VBB SUPPLY
    • ALSO REQUIRES 50V TO 400V SUPPLY
    • ALSO REQUIRES 50V TO 400V VBB SUPPLY
    • ALSO REQUIRES 5V TO 50V VBB SUPPLY
    • ALSO REQUIRES 7V TO 20V SUPPLY
    • ALSO REQUIRES 7V TO 50V VBB SUPPLY
    • ALSO REQUIRES 8V TO 24V SUPPLY
    • ALSO REQUIRES 8V TO 35V VBB SUPPLY
    • ALSO REQUIRES 8V TO 36V VBB SUPPLY
    • ALSO REQUIRES 8V TO 50V VBB SUPPLY
    • ALSO REQUIRES 9V TO 50V VBB SUPPLY
    • ALSO REQUIRES A 10 TO 44 V SUPPLY
    • ALSO REQUIRES A 10 TO 45 V SUPPLY
    • ALSO REQUIRES A 2.7V TO 10V SUPPLY
    • ALSO REQUIRES A 3.5V TO 9.0V SUPPLY
    • ALSO REQUIRES A 4.75V TO 30V SUPPLY
    • ALSO REQUIRES A 5V TO 50V SUPPLY
    • ALSO REQUIRES A 7V TO 45V SUPPLY
    • ALSO REQUIRES A 8V TO 35V SUPPLY
    • ALSO REQUIRES DRIVER SUPPLY 5.5 TO 40 VOLTS
    • ALSO REQUIRES VCC TO 30V VBB SUPPLY
    • ALSO REQURIED SUPPLY VOLTAGE IS 5.5V TO 22V
    • ALSO WORKS ON 4.5 TO 5.5V SUPPLY
    • Also Require Motor supply from 4.5V to 34V
    • CAN ALSO BE OPERATED AT 10.8 TO 13.2V
    • CAN ALSO BE OPERATED AT 10.8 TO 13.2V, 1.2A IS AVAILABLE FOR VOICE COIL MOTOR DRIVER
    • CAN ALSO BE OPERATED AT 4.5 TO 5V VCC POWER SUPPLY; SEATED HEIGHT-NOM
    • CAN BE USED FOR DC, DC BRUSHLESS, AND STEP MOTOR CONTROL
    • CAN CONTROL TWO MOTORS THAT DO NOT OPERATE AT THE SAME TIME
    • CAN DRIVE TWO STEPPING MOTORS AT THE SAME TIME
    • CAN SIMULTANEOUSLY DRIVE 2 STEPPER & 2 DC MOTORS; CHANNEL 1 TO 4 O/P CURRENT IS +/-0.6 AMP/CHANNEL
    • CAN SIMULTANEOUSLY DRIVE TWO STEPPER MOTORS
    • CONTAINS DC MOTOR DRIVER
    • CONTAINS DUAL BIPOLAR STEPPING MOTOR AND ONE DC MOTOR DRIVER
    • CONTAINS DUAL BIPOLAR STEPPING MOTOR DRIVER
    • CONTROL FOR TWO DC MOTORS
    • CONTROL FOR TWO DC MOTORS; ALSO REQUIRES A 12 VOLTS TO 40 VOLTS SUPPLY
    • CONTROL FOR TWO DC MOTORS; ALSO REQUIRES A 4.5 VOLTS TO 10 VOLTS SUPPLY
    • CONTROL SUPPLY VOLTAGE(VCC)= 15V
    • CONTROL SUPPLY VOLTAGE= 15V
    • DIRECT PWM CONTROL SYSTEM, BUILT-IN THERMAL SHUTDOWN CIRCUIT
    • DIVIDE BY 1 AND DIVIDE BY 2 MODE; NO CROSS-CONDUCTION IN EITHER H-BRIDGE
    • FREE CONFIGURABLE AS BRIDGE OR QUAD-SWITCH
    • GATE DRIVER SUPPLY VOLTAGE (VD)= 15V
    • GATE DRIVER SUPPLY VOLTAGE (VDD)= 15V
    • HAS INTERNAL REG VOLTAGE IS 5V
    • HEAT SINK AVAILABLE
    • INPUT VOLTAGE LIMIT-MAX=24
    • INPUT VOLTAGE LIMIT-MAX=30
    • INPUT VOLTAGE LIMIT-MAX=8
    • IT ALSO HAS 13.5 TO 16.5V SUPPLY VOLT
    • IT ALSO HAS 5TO 9 10.8 TO 16 V SUPPLY
    • IT ALSO OPERATES WITH 24 VOLT SUPPLY
    • IT ALSO OPERATES WITH 48 VOLT SUPPLY
    • IT ALSO REQUIRES 10V TO 46V SUPPLY
    • IT ALSO REQUIRES 12V NOM FOR OPERATION
    • IT ALSO REQUIRES 24 V
    • IT ALSO REQUIRES 5 V SUPPLY
    • IT ALSO REQUIRES A 12V SUPPLY
    • IT ALSO REQUIRES A 12V SUPPLY; VCM DRIVER OUTPUT CURRENT IS 1.5A
    • IT ALSO REQUIRES VS=1.6 TO 7.5
    • IT ALSO REQUIRS AN ADDITIONAL MOTOR SUPPLY VOLTAGE OF 10V TO 35V
    • IT ALSO REQUIRS AN ADDITIONAL OUTPUT SUPPLY VOLTAGE OF 10V TO 35V
    • IT CAN ALSO OPERATE FROM A 12V NOMINAL SUPPLY
    • IT CAN ALSO OPERATE WITH 1.8V INPUT SUPPLY
    • IT CAN ALSO OPERATE WITH 1.8V SUPPLY
    • IT HAS 6.5 TO 26V BATTERY SUPPLY VOLTAGE
    • IT HAS A FULL BRIDGE DC MOTOR DRIVER
    • IT OPERATES FROM A -7.6V TO -9.6V SUPPLY
    • IT REQUIRES -20V NEG SUPPLY VOLTAGE
    • ITS ALSO WORKING WITH BRUSHLESS DC MOTOR SO ONLY LEAF CLASS AMTC BLDC
    • LENGTH IS MAX AND ALSO IT HAS 4 TO 5.5 SUPPLY
    • LG-MAX
    • LG-MAX; WD-MAX
    • MI-BUS CAN PROVIDE SATISFACTORY REAL TIME CONTROL OF UP TO EIGHT STEPPER MOTORS
    • MOTOR DRIVE SUPPLY VOLTAGE IS 4.5 TO 35 V
    • MOTOR SUPPLY VOLTAGE IS 2.5 TO 13.5V
    • MOTOR SUPPLY VOLTAGE IS 4.5 TO 33 V
    • MOTOR SUPPLY VOLTAGE IS 50 TO 450 V
    • MOTOR SUPPLY VOLTAGE IS 6.3 TO 32 V; SUPPLY CURRENT ICC1=0.01mA
    • OPERATES IN 5V SUPPLY
    • OPERATES IN 5V SUPPLY, SEATED HT-CALCULATED, SEATED HGT-NOM
    • OPERATES WITH +15 V NOM FOR THE POWER STAGE
    • OTHER NOMINAL SUPPLY VOLTAGE IS 5V AND MOTOR SUPPLY VOLTAGE IS 8V TO 45V
    • OTHER NOMINAL VOLTAGE=5V
    • OTHER SUPPLY VOLTAGE IS -2.5V TO -20V
    • OUTPUT BLOCK POWER SUPPLY IS 20 TO 42V
    • OUTPUT BLOCK POWER SUPPLY IS 20 TO 56V
    • OUTPUT BLOCK POWER SUPPLY IS 5 TO 22
    • OUTPUT BLOCK POWER SUPPLY IS 5 TO 22V
    • OUTPUT BLOCK SUPPLY IS 5 TO 22V
    • OUTPUT CURRENT IN LOCK-DETECTION MODE IS 1A, SEATED HGT-NOM
    • OUTPUT CURRENT-MAX =120 MICRO AMP
    • SEATED HEIGHT-NOM
    • SEATED HGT-NOM
    • SEATED HGT-NOM; ALSO REQUIRES VS 5 TO 22V
    • SEATED HT-CALCULATED
    • SEATED HT-NOM
    • SELECTABLE BRUSH DC MOTOR DRIVER
    • SIP-12
    • T ALSO HAS 0 TO 11 V MOTOR SUPPLY VOLTAGE
    • UNDERVOLTAGE LOCKOUT
    • UNDERVOLTAGE LOCKOUT; DIVIDE BY 1 AND DIVIDE BY 2 MODES; CROSS-CONDUCTION PREVENTION LOGIC
    • VCC AND VOPR REP SAME SUPPLY
    • VCM DRIVE OUTPUT PEAK CURRENT IS 1A
    • VCM OUTPUT CURRENT IS 400 MILLI AMP
    • VCM PEAK SINK/SOURCE OUTPUT CURRENT IS 1.6 AMP
    • VNOM WITH RESPECT TO GND
    • WD-CALCULATED
    • it also has 2k ESD wrt application handling
Minimum Input Voltage
    • -.25 V
    • -2.7 V
    • 0 V
JESD-609 Code
    • e0
    • e1
    • e2
    • e3
    • e3/e2
    • e3/e4
    • e4
    • e6
Maximum Time At Peak Reflow Temperature (s)
    • 10
    • 20
    • 30
    • 40
    • NOT APPLICABLE
    • NOT SPECIFIED
Peak Reflow Temperature (C)
    • 220
    • 225
    • 235
    • 240
    • 245
    • 250
    • 260
    • NOT APPLICABLE
    • NOT SPECIFIED
Length
    • 1.08 mm
    • 1.13 mm
    • 1.18 mm
    • 1.2 mm
    • 1.27 mm
    • 1.3 mm
    • 1.37 mm
    • 1.39 mm
    • 1.44 mm
    • 1.45 mm
    • 1.465 mm
    • 1.47 mm
    • 1.6 mm
    • 10 mm
    • 10.1 mm
    • 10.16 mm
    • 10.18 mm
    • 10.2 mm
    • 10.21 mm
    • 10.3 mm
    • 10.8 mm
    • 108 mm
    • 1090 mm
    • 11 mm
    • 11.15 mm
    • 11.43 mm
    • 11.505 mm
    • 11.5062 mm
    • 12 mm
    • 12.5 mm
    • 12.6 mm
    • 12.7 mm
    • 12.74 mm
    • 12.77 mm
    • 12.7762 mm
    • 12.78 mm
    • 12.8 mm
    • 12.825 mm
    • 12.827 mm
    • 12.9 mm
    • 13 mm
    • 13.5 mm
    • 13.6 mm
    • 13.7 mm
    • 14 mm
    • 14.42 mm
    • 15 mm
    • 15.2 mm
    • 15.3 mm
    • 15.3924 mm
    • 15.395 mm
    • 15.4 mm
    • 15.6 mm
    • 15.697 mm
    • 15.875 mm
    • 15.9 mm
    • 16 mm
    • 16.2 mm
    • 16.585 mm
    • 16.5862 mm
    • 16.59 mm
    • 16.66 mm
    • 17 mm
    • 17.2 mm
    • 17.5 mm
    • 17.65 mm
    • 17.8 mm
    • 17.9 mm
    • 17.905 mm
    • 17.92 mm
    • 17.925 mm
    • 17.93 mm
    • 18 mm
    • 18.1 mm
    • 18.4 mm
    • 18.5 mm
    • 18.6 mm
    • 18.86 mm
    • 19 mm
    • 19.025 mm
    • 19.05 mm
    • 19.175 mm
    • 19.177 mm
    • 19.18 mm
    • 19.25 mm
    • 19.3 mm
    • 19.305 mm
    • 19.4 mm
    • 19.65 mm
    • 2 mm
    • 2.0125 mm
    • 2.47 mm
    • 2.5 mm
    • 2.6 mm
    • 2.7 mm
    • 2.85 mm
    • 2.87 mm
    • 2.9 mm
    • 20 mm
    • 20.07 mm
    • 20.13 mm
    • 21.6 mm
    • 21.67 mm
    • 21.675 mm
    • 21.8 mm
    • 22 mm
    • 22.28 mm
    • 22.48 mm
    • 22.7 mm
    • 23 mm
    • 23.2 mm
    • 24 mm
    • 24.2 mm
    • 24.38 mm
    • 24.6 mm
    • 25.15 mm
    • 25.3 mm
    • 25.4 mm
    • 25.9 mm
    • 26.16 mm
    • 26.415 mm
    • 26.5 mm
    • 26.75 mm
    • 26.8 mm
    • 27 mm
    • 27.1 mm
    • 27.8 mm
    • 27.94 mm
    • 28 mm
    • 28.2 mm
    • 28.8 mm
    • 29 mm
    • 29.15 mm
    • 29.2 mm
    • 29.4 mm
    • 29.5 mm
    • 29.6 mm
    • 3 mm
    • 3.5 mm
    • 3.8 mm
    • 30 mm
    • 30.099 mm
    • 30.1 mm
    • 31 mm
    • 31.69 mm
    • 31.75 mm
    • 31.875 mm
    • 32 mm
    • 32.15 mm
    • 32.5 mm
    • 33.11 mm
    • 34.545 mm
    • 35 mm
    • 35.5 mm
    • 35.725 mm
    • 36 mm
    • 36.32 mm
    • 36.51 mm
    • 36.83 mm
    • 37 mm
    • 37.34 mm
    • 38 mm
    • 38.1 mm
    • 39 mm
    • 4 mm
    • 4.2 mm
    • 4.4 mm
    • 4.5 mm
    • 4.89 mm
    • 4.9 mm
    • 4.91 mm
    • 44 mm
    • 44.4 mm
    • 5 mm
    • 5.1 mm
    • 5.13 mm
    • 5.2 mm
    • 5.22 mm
    • 5.232 mm
    • 5.3 mm
    • 5.45 mm
    • 5.5 mm
    • 5.65 mm
    • 50.8 mm
    • 51.99 mm
    • 52.32 mm
    • 53 mm
    • 54.5 mm
    • 59.8 mm
    • 6 mm
    • 6.13 mm
    • 6.21 mm
    • 6.45 mm
    • 6.5 mm
    • 6.6 mm
    • 6.65 mm
    • 60 mm
    • 62 mm
    • 64 mm
    • 7 mm
    • 7.1 mm
    • 7.2 mm
    • 7.21 mm
    • 7.5 mm
    • 7.6 mm
    • 7.8 mm
    • 76 mm
    • 79 mm
    • 8 mm
    • 8.2 mm
    • 8.25 mm
    • 8.3 mm
    • 8.64 mm
    • 8.65 mm
    • 8.75 mm
    • 8.89 mm
    • 8.965 mm
    • 80 mm
    • 85 mm
    • 85.5 mm
    • 9 mm
    • 9.14 mm
    • 9.2 mm
    • 9.271 mm
    • 9.395 mm
    • 9.46 mm
    • 9.5 mm
    • 9.52 mm
    • 9.59 mm
    • 9.6 mm
    • 9.7 mm
    • 9.75 mm
    • 9.78 mm
    • 9.9 mm
    • 9.95 mm
    • 95 mm
Adjustable Threshold
    • YES
Maximum Input Voltage
    • .25 V
    • 2.5 V
Reset All
Part RoHS Manufacturer Other IC type Temperature Grade No. of Terminals Package Code Package Shape Surface Mount Package Body Material Maximum Supply Current (Isup) Maximum Output Current No. of Functions No. of Channels Technology Screening Level Terminal Form Nominal Negative Supply Voltage (Vsup) Nominal Supply Voltage (Vsup) Power Supplies (V) Package Style (Meter) Package Equivalence Code Sub-Category Terminal Pitch Maximum Operating Temperature Minimum Operating Temperature Terminal Finish Maximum Output Voltage Terminal Position JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Supply Voltage (Vsup) Maximum Seated Height Width (mm) Qualification Minimum Supply Voltage (Vsup) Additional Features Minimum Input Voltage JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length Adjustable Threshold Maximum Input Voltage

MC33033DWR2G

Onsemi

BRUSHLESS DC MOTOR CONTROLLER

INDUSTRIAL

20

SOP

RECTANGULAR

YES

PLASTIC/EPOXY

22 mA

.1 A

1

BIPOLAR

GULL WING

20 V

20

SMALL OUTLINE

SOP20,.4

Motion Control Electronics

1.27 mm

85 Cel

-40 Cel

MATTE TIN

DUAL

R-PDSO-G20

3

30 V

2.65 mm

7.5 mm

Not Qualified

10 V

e3

30

260

12.8 mm

MC33033PG

Onsemi

BRUSHLESS DC MOTOR CONTROLLER

INDUSTRIAL

20

DIP

RECTANGULAR

NO

PLASTIC/EPOXY

22 mA

.1 A

1

BIPOLAR

THROUGH-HOLE

20 V

20

IN-LINE

DIP20,.3

Motion Control Electronics

2.54 mm

85 Cel

-40 Cel

TIN

DUAL

R-PDIP-T20

30 V

4.57 mm

7.62 mm

Not Qualified

10 V

e3

260

26.415 mm

UC2637DWG4

Texas Instruments

BRUSH DC MOTOR CONTROLLER

OTHER

20

SOP

RECTANGULAR

YES

PLASTIC/EPOXY

15 mA

.5 A

1

BIPOLAR

GULL WING

15 V

+-5,+-15

SMALL OUTLINE

SOP20,.4

Motion Control Electronics

1.27 mm

85 Cel

-25 Cel

Nickel/Palladium/Gold (Ni/Pd/Au)

DUAL

R-PDSO-G20

2

20 V

2.65 mm

7.5 mm

Not Qualified

2.5 V

ALSO REQUIRES -2.5V TO -20V SUPPLY

e4

NOT SPECIFIED

260

12.8 mm

UC2637NG4

Texas Instruments

BRUSH DC MOTOR CONTROLLER

OTHER

18

DIP

RECTANGULAR

NO

PLASTIC/EPOXY

15 mA

.5 A

1

BIPOLAR

THROUGH-HOLE

15 V

+-5,+-15

IN-LINE

DIP20,.3

Motion Control Electronics

2.54 mm

85 Cel

-25 Cel

Nickel/Palladium/Gold (Ni/Pd/Au)

DUAL

R-PDIP-T18

20 V

5.08 mm

7.62 mm

Not Qualified

2.5 V

ALSO REQUIRES -2.5V TO -20V SUPPLY

e4

NOT APPLICABLE

NOT APPLICABLE

22.48 mm

UC3637NG4

Texas Instruments

BRUSH DC MOTOR CONTROLLER

COMMERCIAL

18

DIP

RECTANGULAR

NO

PLASTIC/EPOXY

15 mA

.5 A

1

BIPOLAR

THROUGH-HOLE

15 V

+-5,+-15

IN-LINE

DIP20,.3

Motion Control Electronics

2.54 mm

70 Cel

0 Cel

Nickel/Palladium/Gold (Ni/Pd/Au)

DUAL

R-PDIP-T18

20 V

5.08 mm

7.62 mm

Not Qualified

2.5 V

ALSO REQUIRES -2.5V TO -20V SUPPLY

e4

NOT APPLICABLE

NOT APPLICABLE

22.48 mm

UC3638DWG4

Texas Instruments

BRUSH DC MOTOR CONTROLLER

COMMERCIAL

20

SOP

RECTANGULAR

YES

PLASTIC/EPOXY

23 mA

.5 A

1

BIPOLAR

GULL WING

-15 V

15 V

+-15

SMALL OUTLINE

SOP20,.4

Motion Control Electronics

1.27 mm

70 Cel

0 Cel

NICKEL PALLADIUM GOLD

DUAL

R-PDSO-G20

2

36 V

2.65 mm

7.5 mm

Not Qualified

10 V

e4

30

260

12.8 mm

UC3717ANG4

Texas Instruments

STEPPER MOTOR CONTROLLER

COMMERCIAL

16

DIP

RECTANGULAR

NO

PLASTIC/EPOXY

15 mA

1.2 A

1

BIPOLAR

THROUGH-HOLE

36 V

5,10/40

IN-LINE

DIP16,.3

Motion Control Electronics

2.54 mm

70 Cel

0 Cel

NICKEL PALLADIUM GOLD

DUAL

R-PDIP-T16

46 V

5.33 mm

7.62 mm

Not Qualified

10 V

IT ALSO REQUIRES 10V TO 46V SUPPLY

e4

19.3 mm

UCC3626PWTRG4

Texas Instruments

BRUSHLESS DC MOTOR CONTROLLER

COMMERCIAL

28

TSSOP

RECTANGULAR

YES

PLASTIC/EPOXY

5 mA

.2 A

1

BICMOS

GULL WING

12 V

12

SMALL OUTLINE, THIN PROFILE, SHRINK PITCH

TSSOP28,.25

Motion Control Electronics

.65 mm

70 Cel

0 Cel

DUAL

R-PDSO-G28

14.5 V

1.2 mm

4.4 mm

Not Qualified

11 V

NOT SPECIFIED

NOT SPECIFIED

9.7 mm

TPIC43T01DAR

Texas Instruments

BRUSHLESS DC MOTOR CONTROLLER

COMMERCIAL

38

TSSOP

RECTANGULAR

YES

PLASTIC/EPOXY

18 mA

1

GULL WING

24 V

24

SMALL OUTLINE, THIN PROFILE, SHRINK PITCH

TSSOP38,.32

Motion Control Electronics

.65 mm

70 Cel

0 Cel

DUAL

R-PDSO-G38

28 V

1.2 mm

6.2 mm

Not Qualified

18 V

NOT SPECIFIED

NOT SPECIFIED

12.5 mm

TDA21801

Infineon Technologies

AC MOTOR CONTROLLER

COMMERCIAL

8

SOP

RECTANGULAR

YES

PLASTIC/EPOXY

12 mA

1

MOS

GULL WING

12 V

12

SMALL OUTLINE

SOP8,.25

Motion Control Electronics

1.27 mm

70 Cel

0 Cel

MATTE TIN

DUAL

R-PDSO-G8

3

13.2 V

1.753 mm

4 mm

Not Qualified

10.8 V

e3

260

5 mm

A3979SLP-T

Allegro MicroSystems

STEPPER MOTOR CONTROLLER

OTHER

28

HTSSOP

RECTANGULAR

YES

PLASTIC/EPOXY

2.5 A

1

BCDMOS

GULL WING

5 V

3.3/5,35

SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH

TSSOP28,.25

Motion Control Electronics

.65 mm

85 Cel

-20 Cel

Matte Tin (Sn)

DUAL

R-PDSO-G28

2

5.5 V

1.2 mm

4.4 mm

Not Qualified

3 V

ALSO REQUIRES 8V TO 35V VBB SUPPLY

e3

40

260

9.7 mm

A3979SLPTR

Allegro MicroSystems

STEPPER MOTOR CONTROLLER

OTHER

28

HTSSOP

RECTANGULAR

YES

PLASTIC/EPOXY

2.5 A

1

BCDMOS

GULL WING

5 V

3.3/5,35

SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH

TSSOP28,.25

Motion Control Electronics

.65 mm

85 Cel

-20 Cel

DUAL

R-PDSO-G28

5.5 V

1.2 mm

4.4 mm

Not Qualified

3 V

9.7 mm

A3979SLP

Allegro MicroSystems

STEPPER MOTOR CONTROLLER

OTHER

28

HTSSOP

RECTANGULAR

YES

PLASTIC/EPOXY

2.5 A

1

BCDMOS

GULL WING

5 V

3.3/5,35

SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH

TSSOP28,.25

Motion Control Electronics

.65 mm

85 Cel

-20 Cel

Tin/Lead (Sn/Pb)

DUAL

R-PDSO-G28

5.5 V

1.2 mm

4.4 mm

Not Qualified

3 V

ALSO REQUIRES 8V TO 35V VBB SUPPLY

e0

9.7 mm

UC2638DWG4

Texas Instruments

BRUSH DC MOTOR CONTROLLER

INDUSTRIAL

20

SOP

RECTANGULAR

YES

PLASTIC/EPOXY

23 mA

.5 A

1

BIPOLAR

GULL WING

-15 V

15 V

+-15

SMALL OUTLINE

SOP20,.4

Motion Control Electronics

1.27 mm

85 Cel

-40 Cel

NICKEL PALLADIUM GOLD

DUAL

R-PDSO-G20

2

36 V

2.65 mm

7.5 mm

Not Qualified

10 V

e4

30

260

12.8 mm

UC2638NG4

Texas Instruments

BRUSH DC MOTOR CONTROLLER

INDUSTRIAL

20

DIP

RECTANGULAR

NO

PLASTIC/EPOXY

23 mA

.5 A

1

BIPOLAR

THROUGH-HOLE

-15 V

15 V

+-15

IN-LINE

DIP20,.3

Motion Control Electronics

2.54 mm

85 Cel

-40 Cel

NICKEL PALLADIUM GOLD

DUAL

R-PDIP-T20

36 V

5.08 mm

7.62 mm

Not Qualified

10 V

e4

25.4 mm

UC3638NG4

Texas Instruments

BRUSH DC MOTOR CONTROLLER

COMMERCIAL

20

DIP

RECTANGULAR

NO

PLASTIC/EPOXY

23 mA

.5 A

1

BIPOLAR

THROUGH-HOLE

-15 V

15 V

+-15

IN-LINE

DIP20,.3

Motion Control Electronics

2.54 mm

70 Cel

0 Cel

Nickel/Palladium/Gold (Ni/Pd/Au)

DUAL

R-PDIP-T20

36 V

5.08 mm

7.62 mm

Not Qualified

10 V

e4

NOT SPECIFIED

NOT SPECIFIED

25.4 mm

UC3770ANG4

Texas Instruments

STEPPER MOTOR CONTROLLER

COMMERCIAL

16

DIP

RECTANGULAR

NO

PLASTIC/EPOXY

25 mA

2 A

1

BIPOLAR

THROUGH-HOLE

36 V

5,10/45

IN-LINE

DIP16,.3

Motion Control Electronics

2.54 mm

70 Cel

0 Cel

Nickel/Palladium/Gold (Ni/Pd/Au)

DUAL

R-PDIP-T16

45 V

5.08 mm

7.62 mm

Not Qualified

10 V

e4

NOT SPECIFIED

NOT SPECIFIED

19.305 mm

UCC2626PWG4

Texas Instruments

BRUSHLESS DC MOTOR CONTROLLER

INDUSTRIAL

28

TSSOP

RECTANGULAR

YES

PLASTIC/EPOXY

5 mA

.2 A

1

BICMOS

GULL WING

12 V

12

SMALL OUTLINE, THIN PROFILE, SHRINK PITCH

TSSOP28,.25

Motion Control Electronics

.65 mm

85 Cel

-40 Cel

NICKEL PALLADIUM GOLD

DUAL

R-PDSO-G28

2

14.5 V

1.2 mm

4.4 mm

Not Qualified

11 V

e4

30

260

9.7 mm

A3950SLP-T

Allegro MicroSystems

BRUSH DC MOTOR CONTROLLER

OTHER

16

HTSSOP

RECTANGULAR

YES

PLASTIC/EPOXY

8.5 mA

2.8 A

1

GULL WING

8/36

SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH

TSSOP16,.25

Motion Control Electronics

.65 mm

85 Cel

-20 Cel

Matte Tin (Sn)

DUAL

R-PDSO-G16

2

36 V

1.2 mm

4.4 mm

Not Qualified

8 V

e3

40

260

5 mm

A3955SB-T

Allegro MicroSystems

STEPPER MOTOR CONTROLLER

OTHER

16

DIP

RECTANGULAR

NO

PLASTIC/EPOXY

50 mA

1.5 A

1

BIPOLAR

THROUGH-HOLE

5 V

5

IN-LINE

DIP16,.3

Motion Control Electronics

2.54 mm

85 Cel

-20 Cel

MATTE TIN

DUAL

R-PDIP-T16

5.5 V

5.33 mm

7.62 mm

Not Qualified

4.5 V

ALSO REQUIRES 5V TO 50V VBB SUPPLY

e3

19.05 mm

A3955SLB-T

Allegro MicroSystems

STEPPER MOTOR CONTROLLER

OTHER

16

SOP

RECTANGULAR

YES

PLASTIC/EPOXY

50 mA

1.5 A

1

BIPOLAR

GULL WING

5 V

5

SMALL OUTLINE

SOP16,.4

Motion Control Electronics

1.27 mm

85 Cel

-20 Cel

Matte Tin (Sn)

DUAL

R-PDSO-G16

3

5.5 V

2.65 mm

7.5 mm

Not Qualified

4.5 V

ALSO REQUIRES 5V TO 50V VBB SUPPLY

e3

40

260

10.3 mm

A3972SB-T

Allegro MicroSystems

BRUSH DC MOTOR CONTROLLER

OTHER

24

DIP

RECTANGULAR

NO

PLASTIC/EPOXY

12 mA

1.5 A

2

MOS

THROUGH-HOLE

5 V

5

IN-LINE

DIP24,.3

Motion Control Electronics

2.54 mm

85 Cel

-20 Cel

MATTE TIN

DUAL

R-PDIP-T24

5.5 V

5.33 mm

7.62 mm

Not Qualified

4.5 V

ALSO REQUIRES 15V TO 50V VBB SUPPLY

e3

30.099 mm

AH287-PG-B

Diodes Incorporated

BRUSHLESS DC MOTOR CONTROLLER

INDUSTRIAL

4

SIP

RECTANGULAR

NO

UNSPECIFIED

4 mA

.7 A

1

THROUGH-HOLE

24 V

24

IN-LINE

SIP4,.03,50

Motion Control Electronics

1.27 mm

100 Cel

-40 Cel

MATTE TIN

SINGLE

R-XSIP-T4

28 V

5.27 mm

1.55 mm

Not Qualified

3.8 V

e3

30

260

5.22 mm

AH291-PG-B

Diodes Incorporated

BRUSHLESS DC MOTOR CONTROLLER

OTHER

4

SIP

RECTANGULAR

NO

UNSPECIFIED

4 mA

.7 A

1

THROUGH-HOLE

5 V

5

IN-LINE

SIP4,.03,50

Motion Control Electronics

1.27 mm

100 Cel

-20 Cel

MATTE TIN

SINGLE

R-XSIP-T4

5.75 V

5.27 mm

1.55 mm

Not Qualified

1.8 V

e3

30

260

5.22 mm

A3968SLBTR-T

Allegro MicroSystems

STEPPER MOTOR CONTROLLER

OTHER

16

SOP

RECTANGULAR

YES

PLASTIC/EPOXY

.75 A

1

BIPOLAR

GULL WING

5 V

5

SMALL OUTLINE

SOP16,.4

Motion Control Electronics

1.27 mm

85 Cel

-20 Cel

MATTE TIN

DUAL

R-PDSO-G16

3

30 V

2.65 mm

7.5 mm

Not Qualified

4.75 V

ALSO REQUIRES VCC TO 30V VBB SUPPLY

e3

40

260

10.3 mm

A3977KLPTR-T

Allegro MicroSystems

STEPPER MOTOR CONTROLLER

AUTOMOTIVE

28

HTSSOP

RECTANGULAR

YES

PLASTIC/EPOXY

2.5 A

1

NMOS

GULL WING

5 V

3.3/5,35

SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH

TSSOP28,.25

Motion Control Electronics

.65 mm

125 Cel

-40 Cel

Matte Tin (Sn)

DUAL

R-PDSO-G28

2

5.5 V

1.2 mm

4.4 mm

Not Qualified

3 V

ALSO REQUIRES A 8V TO 35V SUPPLY

e3

40

260

9.7 mm

A3983SLPTR

Allegro MicroSystems

STEPPER MOTOR CONTROLLER

OTHER

24

HTSSOP

RECTANGULAR

YES

PLASTIC/EPOXY

2 A

1

BCDMOS

GULL WING

3.3/5,35

SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH

TSSOP24,.25

Motion Control Electronics

.65 mm

85 Cel

-20 Cel

DUAL

R-PDSO-G24

1

5.5 V

1.2 mm

4.4 mm

Not Qualified

3 V

7.8 mm

A3984SLPTR

Allegro MicroSystems

STEPPER MOTOR CONTROLLER

OTHER

24

HTSSOP

RECTANGULAR

YES

PLASTIC/EPOXY

8 mA

2 A

1

BCDMOS

GULL WING

3.3/5,35

SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH

TSSOP24,.25

Motion Control Electronics

.65 mm

85 Cel

-20 Cel

DUAL

R-PDSO-G24

1

5.5 V

1.2 mm

4.4 mm

Not Qualified

3 V

7.8 mm

L6219DSTR-T

Allegro MicroSystems

STEPPER MOTOR CONTROLLER

OTHER

24

SOP

RECTANGULAR

YES

PLASTIC/EPOXY

1 A

1

BIPOLAR

GULL WING

5 V

5,45

SMALL OUTLINE

SOP24,.4

Motion Control Electronics

1.27 mm

85 Cel

-20 Cel

Matte Tin (Sn)

DUAL

R-PDSO-G24

3

5.25 V

2.65 mm

7.5 mm

Not Qualified

4.75 V

ALSO REQUIRES 10V TO 45V VBB SUPPLY

e3

40

260

15.4 mm

A2919SLB-T

Allegro MicroSystems

STEPPER MOTOR CONTROLLER

INDUSTRIAL

24

SOP

RECTANGULAR

YES

PLASTIC/EPOXY

50 mA

1 A

1

BIPOLAR

GULL WING

5 V

5

SMALL OUTLINE

SOP24,.4

Motion Control Electronics

1.27 mm

85 Cel

-40 Cel

Matte Tin (Sn)

DUAL

R-PDSO-G24

3

5.25 V

2.65 mm

7.5 mm

Not Qualified

4.75 V

ALSO REQUIRES 10V TO 45V VBB SUPPLY

e3

40

260

15.4 mm

A3949SLPTR-T

Allegro MicroSystems

BRUSH DC MOTOR CONTROLLER

OTHER

16

HTSSOP

RECTANGULAR

YES

PLASTIC/EPOXY

8.5 mA

2.8 A

1

NMOS

GULL WING

8/36

SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH

TSSOP16,.25

Motion Control Electronics

.65 mm

85 Cel

-20 Cel

Matte Tin (Sn)

DUAL

R-PDSO-G16

1

36 V

1.2 mm

4.4 mm

Not Qualified

8 V

e3

40

260

5 mm

UDN2916B-T

Allegro MicroSystems

STEPPER MOTOR CONTROLLER

OTHER

24

DIP

RECTANGULAR

NO

PLASTIC/EPOXY

50 mA

1 A

1

BIPOLAR

THROUGH-HOLE

5 V

5

IN-LINE

DIP24,.3

Motion Control Electronics

2.54 mm

85 Cel

-20 Cel

MATTE TIN

DUAL

R-PDIP-T24

5.25 V

5.33 mm

7.62 mm

Not Qualified

4.75 V

ALSO REQUIRES 10V TO 45V VBB SUPPLY

e3

30.1 mm

UDN2916LBTR-T

Allegro MicroSystems

STEPPER MOTOR CONTROLLER

OTHER

24

SOP

RECTANGULAR

YES

PLASTIC/EPOXY

50 mA

1 A

1

BIPOLAR

GULL WING

5 V

5

SMALL OUTLINE

SOP24,.4

Motion Control Electronics

1.27 mm

85 Cel

-20 Cel

Matte Tin (Sn)

DUAL

R-PDSO-G24

3

5.25 V

2.65 mm

7.5 mm

Not Qualified

4.75 V

ALSO REQUIRES 10V TO 45V VBB SUPPLY

e3

40

260

15.4 mm

UDQ2916LBTR-T

Allegro MicroSystems

STEPPER MOTOR CONTROLLER

INDUSTRIAL

24

SOP

RECTANGULAR

YES

PLASTIC/EPOXY

50 mA

1 A

1

BIPOLAR

GULL WING

5 V

5

SMALL OUTLINE

SOP24,.4

Motion Control Electronics

1.27 mm

105 Cel

-40 Cel

Matte Tin (Sn)

DUAL

R-PDSO-G24

3

5.25 V

2.65 mm

7.5 mm

Not Qualified

4.75 V

ALSO REQUIRES 10V TO 45V VBB SUPPLY

e3

40

260

15.4 mm

NCV7702BDWG

Onsemi

STEPPER MOTOR CONTROLLER

AUTOMOTIVE

24

SOP

RECTANGULAR

YES

PLASTIC/EPOXY

40 mA

2

GULL WING

7/16

SMALL OUTLINE

SOP24,.4

Motion Control Electronics

1.27 mm

125 Cel

-40 Cel

TIN

DUAL

R-PDSO-G24

3

16 V

2.65 mm

7.5 mm

Not Qualified

7 V

e3

260

15.395 mm

NCV7702BDWR2G

Onsemi

STEPPER MOTOR CONTROLLER

AUTOMOTIVE

24

SOP

RECTANGULAR

YES

PLASTIC/EPOXY

40 mA

2

GULL WING

7/16

SMALL OUTLINE

SOP24,.4

Motion Control Electronics

1.27 mm

125 Cel

-40 Cel

MATTE TIN

DUAL

R-PDSO-G24

3

16 V

2.65 mm

7.5 mm

Not Qualified

7 V

e3

30

260

15.395 mm

A3946KLB-T

Allegro MicroSystems

BRUSHLESS DC MOTOR CONTROLLER

AUTOMOTIVE

16

SOP

RECTANGULAR

YES

PLASTIC/EPOXY

6 mA

1

BCDMOS

GULL WING

7.75 V

7/60

SMALL OUTLINE

SOP16,.4

Motion Control Electronics

1.27 mm

135 Cel

-40 Cel

Matte Tin (Sn)

DUAL

R-PDSO-G16

3

60 V

2.65 mm

7.5 mm

Not Qualified

7 V

CAN BE USED FOR DC, DC BRUSHLESS, AND STEP MOTOR CONTROL

e3

40

260

10.3 mm

A3946KLBTR-T

Allegro MicroSystems

BRUSHLESS DC MOTOR CONTROLLER

AUTOMOTIVE

16

SOP

RECTANGULAR

YES

PLASTIC/EPOXY

6 mA

1

BCDMOS

GULL WING

7.75 V

7/60

SMALL OUTLINE

SOP16,.4

Motion Control Electronics

1.27 mm

135 Cel

-40 Cel

Matte Tin (Sn)

DUAL

R-PDSO-G16

3

60 V

2.65 mm

7.5 mm

Not Qualified

7 V

CAN BE USED FOR DC, DC BRUSHLESS, AND STEP MOTOR CONTROL

e3

40

260

10.3 mm

BTS7930B

Infineon Technologies

BRUSHLESS DC MOTOR CONTROLLER

7

TO-263

RECTANGULAR

YES

PLASTIC/EPOXY

3 mA

1

MOS

GULL WING

18 V

8/18

SMALL OUTLINE

SMSIP7H,.55,50TB

Motion Control Electronics

1.27 mm

SINGLE

R-PSSO-G7

28 V

9.2 mm

Not Qualified

5.5 V

CONTAINS DC MOTOR DRIVER

NOT SPECIFIED

NOT SPECIFIED

L6219R013TR

STMicroelectronics

STEPPER MOTOR CONTROLLER

OTHER

24

SOP

RECTANGULAR

YES

PLASTIC/EPOXY

1 A

1

BIPOLAR

GULL WING

5 V

4.5,5

SMALL OUTLINE

SOP24,.4

Motion Control Electronics

1.27 mm

85 Cel

-20 Cel

DUAL

R-PDSO-G24

5.25 V

2.65 mm

7.5 mm

Not Qualified

4.75 V

CONTROL FOR TWO DC MOTORS; ALSO REQUIRES A 4.5 VOLTS TO 10 VOLTS SUPPLY

NOT SPECIFIED

NOT SPECIFIED

15.4 mm

UC2625DWG4

Texas Instruments

BRUSHLESS DC MOTOR CONTROLLER

INDUSTRIAL

28

SOP

RECTANGULAR

YES

PLASTIC/EPOXY

30 mA

2 A

1

BIPOLAR

GULL WING

12 V

12

SMALL OUTLINE

SOP28,.4

Motion Control Electronics

1.27 mm

85 Cel

-40 Cel

NICKEL PALLADIUM GOLD

DUAL

R-PDSO-G28

2

18 V

2.65 mm

7.5 mm

Not Qualified

10 V

e4

30

260

17.9 mm

BA6956AN

ROHM

BRUSH DC MOTOR CONTROLLER

COMMERCIAL EXTENDED

9

SIP

RECTANGULAR

NO

PLASTIC/EPOXY

80 mA

1 A

1

BIPOLAR

THROUGH-HOLE

9 V

9

IN-LINE

SIP9,.05

Motion Control Electronics

2.54 mm

75 Cel

-20 Cel

TIN COPPER

SINGLE

R-PSIP-T9

15 V

7.2 mm

2.8 mm

Not Qualified

6.5 V

e2

10

260

21.8 mm

TMP816PWR

Texas Instruments

BRUSHLESS DC MOTOR CONTROLLER

INDUSTRIAL

20

TSSOP

RECTANGULAR

YES

PLASTIC/EPOXY

14 mA

.05 A

1

BIPOLAR

GULL WING

12 V

12

SMALL OUTLINE

TSSOP20,.25

Motion Control Electronics

.65 mm

85 Cel

-40 Cel

NICKEL PALLADIUM GOLD

DUAL

R-PDSO-G20

1

16 V

1.2 mm

4.4 mm

Not Qualified

6 V

e4

30

260

6.5 mm

LB11696V-W-AH

Onsemi

BRUSHLESS DC MOTOR CONTROLLER

OTHER

30

LSSOP

RECTANGULAR

YES

PLASTIC/EPOXY

16 mA

.03 A

1

BIPOLAR

GULL WING

12 V

SMALL OUTLINE, LOW PROFILE, SHRINK PITCH

SSOP30,.3

.65 mm

100 Cel

-20 Cel

TIN BISMUTH

DUAL

R-PDSO-G30

3

17 V

1.5 mm

5.6 mm

8 V

e6

30

260

9.75 mm

LA6585MC-AH-M

Onsemi

BRUSHLESS DC MOTOR CONTROLLER

OTHER

10

SSOP

RECTANGULAR

YES

PLASTIC/EPOXY

9 mA

.7 A

1

BIPOLAR

GULL WING

12 V

SMALL OUTLINE, SHRINK PITCH

SOP10,.25,40

1 mm

90 Cel

-30 Cel

MATTE TIN

DUAL

R-PDSO-G10

3

14 V

1.75 mm

3.9 mm

2.2 V

e3

30

260

4.9 mm

LB11685AV-W-AH

Onsemi

BRUSHLESS DC MOTOR CONTROLLER

INDUSTRIAL

24

LSSOP

RECTANGULAR

YES

PLASTIC/EPOXY

20 mA

1.2 A

1

GULL WING

12 V

SMALL OUTLINE, LOW PROFILE, SHRINK PITCH

SOP24,.3,32

.8 mm

85 Cel

-40 Cel

TIN BISMUTH

DUAL

R-PDSO-G24

3

18 V

1.5 mm

5.6 mm

4.5 V

e6

30

260

9.75 mm

LB11850VA-W-AH

Onsemi

AC MOTOR CONTROLLER

OTHER

24

LSSOP

RECTANGULAR

YES

PLASTIC/EPOXY

.02 A

1

BIPOLAR

GULL WING

12 V

SMALL OUTLINE, LOW PROFILE, SHRINK PITCH

SSOP24,.25,20

.5 mm

95 Cel

-30 Cel

TIN BISMUTH

DUAL

R-PDSO-G24

3

16 V

1.5 mm

4.4 mm

5.5 V

e6

30

260

6.5 mm

LB11867FV-W-AH

Onsemi

BRUSHLESS DC MOTOR CONTROLLER

OTHER

16

LSSOP

RECTANGULAR

YES

PLASTIC/EPOXY

9.5 mA

.02 A

1

BIPOLAR

GULL WING

12 V

SMALL OUTLINE, LOW PROFILE, SHRINK PITCH

SSOP16,.25

.65 mm

95 Cel

-30 Cel

TIN BISMUTH

DUAL

R-PDSO-G16

3

16 V

1.5 mm

4.4 mm

5.5 V

e6

30

260

5.2 mm

Motion Control ICs

Motion control ICs are electronic components designed to control and regulate the movement of mechanical systems. They are used in a wide range of applications, including robotics, manufacturing equipment, and aerospace systems.

Motion control ICs use various technologies to control motion, including microcontrollers, motor drivers, and sensors. They can be used to control the speed, position, and direction of motors, actuators, and other mechanical systems.

One of the main applications of motion control ICs is in robotics, where they are used to control the movement of robot arms, legs, and other components. They can also be used in manufacturing equipment to control the movement of conveyor belts, assembly lines, and other machinery.

Motion control ICs can provide high levels of precision and accuracy in controlling motion. They are often designed to operate in harsh environments and can withstand high temperatures, vibration, and shock.