OTHER Motion Control ICs 276

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	Maximum Output Current	No. of Functions	Technology	Terminal Form	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width (mm)	Qualification	Minimum Supply Voltage (Vsup)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
TB6615PG,8	Toshiba		OTHER	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	27 mA			BIPOLAR	THROUGH-HOLE		3/5	IN-LINE	DIP16,.3	Motion Control Electronics	2.54 mm	85 Cel	-30 Cel		DUAL	R-PDIP-T16					Not Qualified
A4973SB-T	Allegro MicroSystems	BRUSH DC MOTOR CONTROLLER	OTHER	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY			1		THROUGH-HOLE	5 V	3.3/5	IN-LINE	DIP16,.3	Motion Control Electronics	2.54 mm	85 Cel	-20 Cel	Matte Tin (Sn)	DUAL	R-PDIP-T16		5.5 V	5.33 mm	7.62 mm	Not Qualified	3 V	ALSO REQUIRE 5V TO 50V	e3	40	260	19.05 mm
BD63843EFV-E2	ROHM	STEPPER MOTOR CONTROLLER	OTHER	28	HVSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	5 mA	1.5 A	1	BIPOLAR	GULL WING	24 V	24	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE, SHRINK PITCH	TSSOP28,.25	Motion Control Electronics	.65 mm	85 Cel	-25 Cel		DUAL	R-PDSO-G28		28 V	1 mm	4.4 mm	Not Qualified	19 V			NOT SPECIFIED	NOT SPECIFIED	9.7 mm
HCTL-1101	Broadcom	STEPPER MOTOR CONTROLLER	OTHER		DIP						1	CMOS		5 V					2.54 mm	85 Cel	-20 Cel	NICKEL PALLADIUM GOLD			1	5.25 V	4.83 mm	15.24 mm		4.75 V		e4		260	52.32 mm
BD63874EFV-E2	ROHM	STEPPER MOTOR CONTROLLER	OTHER	28	HVSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	5 mA	2 A	1	BIPOLAR	GULL WING	24 V	24	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE, SHRINK PITCH	TSSOP28,.25	Motion Control Electronics	.65 mm	85 Cel	-25 Cel		DUAL	R-PDSO-G28		28 V	1 mm	4.4 mm	Not Qualified	19 V			NOT SPECIFIED	NOT SPECIFIED	9.7 mm
LB1938FA-AH	Onsemi	BRUSHLESS DC MOTOR CONTROLLER	OTHER	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY	29 mA	.8 A	1	BIPOLAR	GULL WING	3 V	3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Motion Control Electronics	.65 mm	85 Cel	-30 Cel	TIN	DUAL	S-PDSO-G8	3	10 V	1.1 mm	3 mm	Not Qualified	2.2 V		e3	30	260	3 mm
LV8731V-MPB-H	Onsemi	STEPPER MOTOR CONTROLLER	OTHER	44	HLSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	5 mA	2.5 A	1	BCDMOS	GULL WING	24 V	24	SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE, SHRINK PITCH	SSOP44,.3	Motion Control Electronics	.65 mm	85 Cel	-20 Cel	TIN BISMUTH	DUAL	R-PDSO-G44	3	32 V	1.7 mm	5.6 mm	Not Qualified	9 V		e6	30	260	15 mm
LV8731V-TLM-H	Onsemi	STEPPER MOTOR CONTROLLER	OTHER	44	HLSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	5 mA	2.5 A	1	BCDMOS	GULL WING	24 V	24	SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE, SHRINK PITCH	SSOP44,.3	Motion Control Electronics	.65 mm	85 Cel	-20 Cel	TIN BISMUTH	DUAL	R-PDSO-G44	3	32 V	1.7 mm	5.6 mm	Not Qualified	9 V		e6	30	260	15 mm
LV8732V-MPB-H	Onsemi	STEPPER MOTOR CONTROLLER	OTHER	44	HLSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		2.5 A	1	BCDMOS	GULL WING	24 V	24	SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE, SHRINK PITCH	SSOP44,.3	Motion Control Electronics	.65 mm	85 Cel	-20 Cel	TIN BISMUTH	DUAL	R-PDSO-G44	3	32 V	1.7 mm	5.6 mm	Not Qualified	9 V		e6	30	260	15 mm
LV8127T-MPB-H	Onsemi	BRUSH DC MOTOR CONTROLLER	OTHER	36	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY			1		GULL WING	16 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.5 mm	100 Cel	-30 Cel	Tin/Bismuth (Sn/Bi)	DUAL	R-PDSO-G36	3	18 V	1.2 mm	5.6 mm		12 V	ALSO OPERATES WITH THE RANGE OF 18V TO 185V SUPPLY	e6			9.75 mm
STK5Q4U352J-E	Onsemi	AC MOTOR CONTROLLER	OTHER	24		RECTANGULAR	NO	UNSPECIFIED		16 A	1		THROUGH-HOLE	15 V		MICROELECTRONIC ASSEMBLY			1 mm	100 Cel	-20 Cel	Matte Tin (Sn) - annealed	DUAL	R-XDMA-T24		16.5 V	4.8 mm	18.2 mm		13.5 V		e3			29.6 mm
LV8741V-TLM-E	Onsemi	STEPPER MOTOR CONTROLLER	OTHER	44	HLSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1.75 A	1	BICMOS	GULL WING	5 V		SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE, SHRINK PITCH			.65 mm	85 Cel	-20 Cel	TIN BISMUTH	DUAL	R-PDSO-G44	3	5.5 V	1.7 mm	5.6 mm		2.7 V	ALSO OPERATES WITH THE RANGE OF 9.5V TO 35V SUPPLY	e6	30	260	15 mm
LV8414CS-NTE-L-H	Onsemi	STEPPER MOTOR CONTROLLER	OTHER	32	VFBGA	SQUARE	YES	PLASTIC/EPOXY	3 mA	.6 A	1	BICMOS	BALL	3.3 V	3.3,5	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA32,6X6,16	Motion Control Electronics	.4 mm	85 Cel	-30 Cel	TIN SILVER COPPER	BOTTOM	S-PBGA-B32	1	5.5 V	.65 mm	2.47 mm	Not Qualified	2.5 V		e1	30	260	2.47 mm
LV8414CS-TE-L-H	Onsemi	STEPPER MOTOR CONTROLLER	OTHER	32	VFBGA	SQUARE	YES	PLASTIC/EPOXY		.6 A	1	BICMOS	BALL	3.3 V		GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.4 mm	85 Cel	-30 Cel	Tin/Silver/Copper (Sn/Ag/Cu)	BOTTOM	S-PBGA-B32	1	5.5 V	.65 mm	2.47 mm		2.5 V		e1			2.47 mm
LB11852FV-MPB-E	Onsemi	AC MOTOR CONTROLLER	OTHER	20	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		.02 A	1		GULL WING	12 V		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.5 mm	95 Cel	-30 Cel	TIN BISMUTH	DUAL	R-PDSO-G20	3	16 V	1.5 mm	4.4 mm		5.5 V	ALSO OPERATES WITH THE RANGE OF 4.5V TO 5.5V SUPPLY	e6	30	260	5.2 mm
LB11852FV-TLM-H	Onsemi	AC MOTOR CONTROLLER	OTHER	20	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		.02 A	1		GULL WING	12 V		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.5 mm	95 Cel	-30 Cel	TIN BISMUTH	DUAL	R-PDSO-G20	3	16 V	1.5 mm	4.4 mm		5.5 V	ALSO OPERATES WITH THE RANGE OF 4.5V TO 5.5V SUPPLY	e6	30	260	5.2 mm
STK5F1U3E2D-E	Onsemi	AC MOTOR CONTROLLER	OTHER	37		RECTANGULAR	NO	UNSPECIFIED	4 mA	76 A	1	HYBRID	THROUGH-HOLE	15 V	15	MICROELECTRONIC ASSEMBLY	DIP36/44,2	Motion Control Electronics	2.54 mm	100 Cel	-20 Cel	MATTE TIN	DUAL	R-XDMA-T37		16.5 V	6 mm	45 mm	Not Qualified	13.5 V	SEATED HGT-NOM	e3			76 mm
STK5F4U3E2D-E	Onsemi	AC MOTOR CONTROLLER	OTHER	37		RECTANGULAR	NO	PLASTIC/EPOXY		100 A	1	HYBRID	THROUGH-HOLE	15 V	15	MICROELECTRONIC ASSEMBLY	DIP37/44,2	Motion Control Electronics	2.54 mm	100 Cel	-20 Cel	TIN NICKEL	DUAL	R-PDMA-T37		16.5 V	6 mm	45 mm	Not Qualified	13.5 V	SEATED HGT-NOM	e2			76 mm
LB1936V-MPB-E	Onsemi	STEPPER MOTOR CONTROLLER	OTHER	16	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	16 mA		1	BIPOLAR	GULL WING	5 V	5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	SSOP16,.25	Motion Control Electronics	.65 mm	85 Cel	-20 Cel	TIN BISMUTH	DUAL	R-PDSO-G16	3	9.5 V	1.5 mm	4.4 mm	Not Qualified	2.5 V		e6	30	260	5.2 mm
LB1936V-TLM-E	Onsemi	STEPPER MOTOR CONTROLLER	OTHER	16	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	16 mA		1	BIPOLAR	GULL WING	5 V	5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	SSOP16,.25	Motion Control Electronics	.65 mm	85 Cel	-20 Cel	TIN BISMUTH	DUAL	R-PDSO-G16	3	9.5 V	1.5 mm	4.4 mm	Not Qualified	2.5 V		e6	30	260	5.2 mm
AM4961AGHTR-G1	Diodes Incorporated	BRUSHLESS DC MOTOR CONTROLLER	OTHER	14	HTSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1 A	1		GULL WING	12 V		SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH			.65 mm	90 Cel	-30 Cel	MATTE TIN	DUAL	R-PDSO-G14	3	16 V	1.2 mm	4.4 mm		3.5 V		e3	30	260	6.45 mm
AM4961AGSTR-G1	Diodes Incorporated	BRUSHLESS DC MOTOR CONTROLLER	OTHER	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1 A	1		GULL WING	12 V		SMALL OUTLINE, SHRINK PITCH			.635 mm	90 Cel	-30 Cel	MATTE TIN	DUAL	R-PDSO-G16	3	16 V	1.75 mm	3.9 mm		3.5 V		e3	30	260	4.9 mm
LV8400V-MPB-E	Onsemi	BRUSH DC MOTOR CONTROLLER	OTHER	16	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	1.6 mA	3.8 A	1	BICMOS	GULL WING	5 V	5,12	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	SSOP16,.25	Motion Control Electronics	.65 mm	85 Cel	-20 Cel	TIN BISMUTH	DUAL	R-PDSO-G16	3	5.5 V	1.5 mm	4.4 mm	Not Qualified	2.7 V		e6	30	260	5.2 mm
LV8400V-TLM-E	Onsemi	BRUSH DC MOTOR CONTROLLER	OTHER	16	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		3.8 A	1	BICMOS	GULL WING	5 V		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.65 mm	85 Cel	-20 Cel	TIN BISMUTH	DUAL	R-PDSO-G16	3	5.5 V	1.5 mm	4.4 mm		2.7 V		e6	30	260	5.2 mm
LB1940T-MPB-E	Onsemi	STEPPER MOTOR CONTROLLER	OTHER	20	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	7 mA	.4 A	1	BIPOLAR	GULL WING	5 V	3,5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Motion Control Electronics	.65 mm	85 Cel	-20 Cel	TIN BISMUTH	DUAL	R-PDSO-G20	3	7.5 V	1.2 mm	4.4 mm	Not Qualified	1.9 V	ALSO OPERATES WITH THE RANGE OF 1.9V TO 6.5V SUPPLY	e6	30	260	6.5 mm
LV8044LP-MPB-H	Onsemi	DISK DRIVE MOTOR CONTROLLER	OTHER	40	VQCCN	SQUARE	YES	UNSPECIFIED	4 mA	.6 A	1	BICMOS	NO LEAD	3.3 V	3.3	CHIP CARRIER, VERY THIN PROFILE	LCC40,.2SQ,16	Motion Control Electronics	.4 mm	85 Cel	-20 Cel		QUAD	S-XQCC-N40	3	5.5 V	.85 mm	5 mm	Not Qualified	2.7 V					5 mm
LA6581DMR2G	Onsemi	BRUSHLESS DC MOTOR CONTROLLER	OTHER	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		.5 A	1		GULL WING	12 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	100 Cel	-30 Cel	MATTE TIN	DUAL	S-PDSO-G8	1	16 V	1.1 mm	3 mm		2.2 V		e3	30	260	3 mm
LA6595DMR2G	Onsemi	BRUSHLESS DC MOTOR CONTROLLER	OTHER	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		.5 A	1		GULL WING	12 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	90 Cel	-30 Cel	TIN	DUAL	S-PDSO-G8	1	14 V	1.1 mm	3 mm		2.2 V		e3	30	260	3 mm
LV8415XA-MH	Onsemi	STEPPER MOTOR CONTROLLER	OTHER	32	VFBGA	SQUARE	YES	PLASTIC/EPOXY		.6 A	1	BICMOS	BALL	3.3 V		GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.4 mm	85 Cel	-20 Cel	TIN SILVER COPPER	BOTTOM	S-PBGA-B32	1	5.5 V	.69 mm	2.47 mm		2.7 V		e1			2.47 mm
LV8548MC-BH	Onsemi	STEPPER MOTOR CONTROLLER	OTHER	10	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY			1		GULL WING	12 V		SMALL OUTLINE, SHRINK PITCH			1 mm	85 Cel	-30 Cel	TIN	DUAL	R-PDSO-G10	1	16 V	2 mm	3.9 mm		4 V		e3			4.9 mm
LV8548MCZ-AH	Onsemi	STEPPER MOTOR CONTROLLER	OTHER	10	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY			1		GULL WING	12 V		SMALL OUTLINE, SHRINK PITCH			1 mm	85 Cel	-30 Cel	TIN	DUAL	R-PDSO-G10	3	16 V	2 mm	3.9 mm		4 V		e3	30	260	4.9 mm
LC898201RA-NH	Onsemi	STEPPER MOTOR CONTROLLER	OTHER	64	TFBGA	SQUARE	YES	PLASTIC/EPOXY		.45 A	1	CMOS	BALL	3.3 V	3/5	GRID ARRAY, THIN PROFILE, FINE PITCH	BGA64,10X10,20	Motion Control Electronics	.5 mm	85 Cel	-20 Cel		BOTTOM	S-PBGA-B64		3.6 V	1.05 mm	6 mm	Not Qualified	2.7 V	ALSO OPERATES WITH THE RANGE OF 2.7V TO 5.5V SUPPLY		NOT SPECIFIED	NOT SPECIFIED	6 mm
LC898201TA-NH	Onsemi	STEPPER MOTOR CONTROLLER	OTHER	64	TFQFP	SQUARE	YES	PLASTIC/EPOXY		.45 A	1	CMOS	GULL WING	3.3 V	3/5	FLATPACK, THIN PROFILE, FINE PITCH	TQFP64,.35SQ,16	Motion Control Electronics	.4 mm	85 Cel	-20 Cel	MATTE TIN	QUAD	S-PQFP-G64	3	3.6 V	1.2 mm	7 mm	Not Qualified	2.7 V	ALSO OPERATES WITH THE RANGE OF 2.7V TO 5.5V SUPPLY	e3	30	260	7 mm
A3966SLB	Allegro MicroSystems	STEPPER MOTOR CONTROLLER	OTHER	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	50 mA	.75 A	1	BIPOLAR	GULL WING	5 V	5	SMALL OUTLINE	SOP16,.4	Motion Control Electronics	1.27 mm	85 Cel	-20 Cel	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G16		5.5 V	2.65 mm	7.5 mm	Not Qualified	4.75 V	ALSO REQUIRES VCC TO 30V VBB SUPPLY	e0	30	240	10.3 mm
BA6846FVE2	ROHM	BRUSH DC MOTOR CONTROLLER	OTHER	14	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	13.5 mA	.5 A	1	BIPOLAR	GULL WING	5 V	5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSSOP14,.25	Motion Control Electronics	.65 mm	70 Cel	-25 Cel	TIN/TIN COPPER	DUAL	R-PDSO-G14		9 V	1.35 mm	4.4 mm	Not Qualified	2.7 V		e3/e2	10	260	5 mm
LV8549MC-AH	Onsemi	STEPPER MOTOR CONTROLLER	OTHER	10	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY	2.3 mA		1	BICMOS	GULL WING	12 V	12	SMALL OUTLINE, SHRINK PITCH	SOP10,.25,40	Motion Control Electronics	1 mm	85 Cel	-30 Cel	MATTE TIN	DUAL	R-PDSO-G10	3	16 V	2 mm	3.9 mm	Not Qualified	4 V		e3	30	260	4.9 mm
LV8549MC-BH	Onsemi	STEPPER MOTOR CONTROLLER	OTHER	10	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY			1		GULL WING	12 V		SMALL OUTLINE, SHRINK PITCH			1 mm	85 Cel	-30 Cel	TIN	DUAL	R-PDSO-G10	1	16 V	2 mm	3.9 mm		4 V		e3			4.9 mm
LV8161MUTAG	Onsemi	BRUSH DC MOTOR CONTROLLER	OTHER	10	VSON	RECTANGULAR	YES	PLASTIC/EPOXY	2.7 mA	.7 A	1		NO LEAD	5 V	5	SMALL OUTLINE, VERY THIN PROFILE	SOLCC10,.08,20	Motion Control Electronics	.5 mm	95 Cel	-30 Cel		DUAL	R-PDSO-N10		6 V	.55 mm	2 mm	Not Qualified	2.2 V					2.5 mm
MC642P	Onsemi	BRUSH DC MOTOR CONTROLLER	OTHER	8	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	1 mA		1		THROUGH-HOLE	5 V	3.3/5	IN-LINE	DIP8,.3	Motion Control Electronics	2.54 mm	85 Cel	0 Cel	TIN LEAD	DUAL	R-PDIP-T8		5.5 V	4.45 mm	7.62 mm	Not Qualified	3 V		e0		235	9.78 mm
STK534U342C-E	Onsemi	AC MOTOR CONTROLLER	OTHER	21		RECTANGULAR	NO	UNSPECIFIED		10 A	1		THROUGH-HOLE	15 V		MICROELECTRONIC ASSEMBLY			1.27 mm	100 Cel	-20 Cel	Matte Tin (Sn) - annealed	SINGLE	R-XSMA-T21		16.5 V	5.5 mm	26.5 mm		13.5 V	SEATED HGT-NOM	e3			44 mm
STK534U362C-E	Onsemi	AC MOTOR CONTROLLER	OTHER	21		RECTANGULAR	NO	UNSPECIFIED		20 A	1		THROUGH-HOLE	280 V		FLANGE MOUNT				100 Cel	-20 Cel	Matte Tin (Sn) - annealed	SINGLE	R-XSFM-T21		450 V				0 V		e3
NJU39610D2	New Japan Radio	STEPPER MOTOR CONTROLLER	OTHER	22	DIP	RECTANGULAR	NO	PLASTIC/EPOXY			1		THROUGH-HOLE	5 V	5	IN-LINE	DIP22,.4	Motion Control Electronics	2.54 mm	85 Cel	-20 Cel	TIN	DUAL	R-PDIP-T22		5.25 V	5.08 mm	7.62 mm	Not Qualified	4.75 V		e3	10	260	26.8 mm
TB67H302HG	Toshiba	BRUSHLESS DC MOTOR CONTROLLER	OTHER	25	SZIP	RECTANGULAR	NO	PLASTIC/EPOXY		5 A	1	BCDMOS	THROUGH-HOLE	24 V		IN-LINE, SHRINK PITCH			1 mm	85 Cel	-30 Cel		ZIG-ZAG	R-PZIP-T25		42 V	19.37 mm	4.5 mm		8 V					28.8 mm
TB67S141HG	Toshiba	STEPPER MOTOR CONTROLLER	OTHER	25	SZIP	RECTANGULAR	NO	PLASTIC/EPOXY		3 A	1	BCDMOS	THROUGH-HOLE	5 V		IN-LINE, SHRINK PITCH			1 mm	85 Cel	-20 Cel		ZIG-ZAG	R-PZIP-T25		5.25 V	19.37 mm	4.5 mm		4.75 V			NOT SPECIFIED	NOT SPECIFIED	28.8 mm
TB67S142HG	Toshiba	STEPPER MOTOR CONTROLLER	OTHER	25	SZIP	RECTANGULAR	NO	PLASTIC/EPOXY		3 A	1	BCDMOS	THROUGH-HOLE	5 V		IN-LINE, SHRINK PITCH			1 mm	85 Cel	-20 Cel		ZIG-ZAG	R-PZIP-T25		5.25 V	19.37 mm	4.5 mm		4.75 V			NOT SPECIFIED	NOT SPECIFIED	28.8 mm
TB6560AHQ	Toshiba	STEPPER MOTOR CONTROLLER	OTHER	25	HSIP	RECTANGULAR	NO	PLASTIC/EPOXY	5 mA	3.5 A	1	BCDMOS	THROUGH-HOLE	5 V	5	FLANGE MOUNT	ZIP25,.08,.1	Motion Control Electronics	1.27 mm	85 Cel	-30 Cel		ZIG-ZAG	R-PZFM-T25		5.5 V			Not Qualified	4.5 V
AH291-PL-B	Diodes Incorporated	BRUSHLESS DC MOTOR CONTROLLER	OTHER	4	SIP	RECTANGULAR	NO	PLASTIC/EPOXY	4 mA	.7 A	1		THROUGH-HOLE	5 V	5	IN-LINE	SIP4,.03,50	Motion Control Electronics	1.27 mm	100 Cel	-20 Cel	MATTE TIN	SINGLE	R-PSIP-T4		5.75 V	7.3 mm	1.55 mm	Not Qualified	1.8 V	INPUT VOLTAGE LIMIT-MAX=8	e3		260	5.22 mm
AH293-PL-B	Diodes Incorporated	BRUSHLESS DC MOTOR CONTROLLER	OTHER	5	SIP	RECTANGULAR	NO	PLASTIC/EPOXY		.7 A	1		THROUGH-HOLE	5 V		IN-LINE			.95 mm	100 Cel	-20 Cel	MATTE TIN	SINGLE	R-PSIP-T5		5.75 V		1.55 mm	Not Qualified	1.8 V	INPUT VOLTAGE LIMIT-MAX=8	e3		260	5.22 mm

Motion Control ICs

Motion control ICs are electronic components designed to control and regulate the movement of mechanical systems. They are used in a wide range of applications, including robotics, manufacturing equipment, and aerospace systems.

Motion control ICs use various technologies to control motion, including microcontrollers, motor drivers, and sensors. They can be used to control the speed, position, and direction of motors, actuators, and other mechanical systems.

One of the main applications of motion control ICs is in robotics, where they are used to control the movement of robot arms, legs, and other components. They can also be used in manufacturing equipment to control the movement of conveyor belts, assembly lines, and other machinery.

Motion control ICs can provide high levels of precision and accuracy in controlling motion. They are often designed to operate in harsh environments and can withstand high temperatures, vibration, and shock.