10 Multiplexers & Switches 87

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Screening Level	Nominal Bandwidth	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Maximum Signal Current	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Input Voltage	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length	Maximum Input Voltage
FSUSB43L10X-F131	Fairchild Semiconductor	DPDT	INDUSTRIAL	10	QCCN	RECTANGULAR	YES	PLASTIC/EPOXY		1					NO LEAD				3/4.3	CHIP CARRIER	LCC10,.06X.08,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N10	SEPARATE OUTPUT	1					Not Qualified							e4	BREAK-BEFORE-MAKE	30	260		6.5 ohm
NX3L4357GM,132	NXP Semiconductors	SP3T	AUTOMOTIVE	10	QCCN	RECTANGULAR	YES	PLASTIC/EPOXY		1		CMOS			NO LEAD				1.4/4.3	CHIP CARRIER	LCC10,.06X.08,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N10	SEPARATE OUTPUT	1					Not Qualified							e4	BREAK-BEFORE-MAKE	30	260	125 ns	4.1 ohm
NX3L2267GM-Q100X	NXP Semiconductors	SPDT	AUTOMOTIVE	10	QCCN	RECTANGULAR	YES	PLASTIC/EPOXY		2		CMOS	AEC-Q100		NO LEAD				1.4/4.3	CHIP CARRIER	LCC10,.06X.08,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel		QUAD	R-PQCC-N10	SEPARATE OUTPUT						Not Qualified								BREAK-BEFORE-MAKE			90 ns	4.1 ohm
NX3L2267GU-Q100X	NXP Semiconductors	SPDT	AUTOMOTIVE	10	QCCN	RECTANGULAR	YES	PLASTIC/EPOXY		2		CMOS	AEC-Q100		NO LEAD				1.4/4.3	CHIP CARRIER	LCC10,.06X.07,16	Multiplexer or Switches	.4 mm	125 Cel	-40 Cel		QUAD	R-PQCC-N10	SEPARATE OUTPUT						Not Qualified								BREAK-BEFORE-MAKE			90 ns	4.1 ohm
ADG787BCBZ-REEL7	Analog Devices	SPDT	OTHER	10	VFBGA	RECTANGULAR	YES	PLASTIC/EPOXY		2	1	CMOS			BALL			2.7 V		GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.5 mm	85 Cel	-25 Cel	TIN SILVER COPPER	BOTTOM	R-PBGA-B10		1	5.5 V	.63 mm		1.5 mm	Not Qualified		63 dB	1.8 V				e1			260	35 ns	5.75 ohm	7 ns	.07 ohm	2 mm
STG3696EQTR	STMicroelectronics	SPDT	INDUSTRIAL	10	VQCCN	RECTANGULAR	YES	UNSPECIFIED		1	1				NO LEAD			3 V	3/4.2	CHIP CARRIER, VERY THIN PROFILE	LCC10,.06X.07,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-XQCC-N10	SEPARATE OUTPUT	1	4.5 V	.55 mm		1.4 mm	Not Qualified		65 dB	2.7 V				e4	BREAK-BEFORE-MAKE	30	260	85000 ns	5 ohm	5000 ns		1.8 mm
NX3L2267GM,132	NXP Semiconductors		AUTOMOTIVE	10	QCCN	RECTANGULAR	YES	PLASTIC/EPOXY		2		CMOS			NO LEAD				1.4/4.3	CHIP CARRIER	LCC10,.06X.08,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	R-PQCC-N10	SEPARATE OUTPUT	1					Not Qualified							e3	BREAK-BEFORE-MAKE			90 ns	4.1 ohm
NX3L4684TK,132	NXP Semiconductors		AUTOMOTIVE	10	HVSON	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS			NO LEAD			1.65 V	1.5/3.3	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.12,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-N10	SEPARATE OUTPUT	1	4.3 V	1 mm		3 mm	Not Qualified		90 dB	1.4 V				e4	BREAK-BEFORE-MAKE	30	260	130 ns	1.7 ohm	90 ns	.15 ohm	3 mm
NS5A4684SMNTBG	Onsemi	SPDT	INDUSTRIAL	10	QCCN	RECTANGULAR	YES	PLASTIC/EPOXY		2		CMOS			NO LEAD				1.8/5	CHIP CARRIER	LCC10,.06X.07,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N10	SEPARATE OUTPUT	1					Not Qualified							e4	BREAK-BEFORE-MAKE	30	260	50 ns	.6 ohm
ADG5421BRMZ	Analog Devices	SPST	AUTOMOTIVE	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS			GULL WING	-22 V	-15 V	15 V	+-9/+-22/9/40	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	22 V	1.1 mm		3 mm	Not Qualified	NO		9 V			-9 V	e3	BREAK-BEFORE-MAKE	30	260	370 ns	15 ohm		.1 ohm	3 mm
ADG5423BRMZ	Analog Devices	SPST	AUTOMOTIVE	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS			GULL WING	-22 V	-15 V	15 V	+-9/+-22/9/40	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	22 V	1.1 mm		3 mm	Not Qualified	NO/NC		9 V			-9 V	e3	BREAK-BEFORE-MAKE	30	260	370 ns	15 ohm		.1 ohm	3 mm
MAX4525CUB	Maxim Integrated	DPDT	COMMERCIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	2	CMOS			GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	70 Cel	0 Cel	TIN LEAD	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	12 V	1.1 mm		3 mm	Not Qualified		75 dB	2 V	ALSO OPERATE WITH 5V SINGLE SUPPLY			e0	BREAK-BEFORE-MAKE			300 ns	400 ohm	200 ns	2 ohm	3 mm
MAX4524CUB	Maxim Integrated	SINGLE-ENDED MULTIPLEXER	COMMERCIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.01 mA	1	4	CMOS			GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	70 Cel	0 Cel	TIN LEAD	DUAL	S-PDSO-G10		1	12 V	1.1 mm	.02 A	3 mm	Not Qualified		75 dB	2 V	ALSO OPERATE WITH 5V SINGLE SUPPLY			e0	BREAK-BEFORE-MAKE			300 ns	400 ohm	200 ns	2 ohm	3 mm
MAX4524EUB	Maxim Integrated	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.01 mA	1	4	CMOS			GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G10		1	12 V	1.1 mm	.02 A	3 mm	Not Qualified		75 dB	2 V	ALSO OPERATE WITH 5V SINGLE SUPPLY			e0	BREAK-BEFORE-MAKE			300 ns	400 ohm	200 ns	2 ohm	3 mm
ADG704BRM-REEL7	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.001 mA	1	4	CMOS			GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G10		1	5.5 V	1.1 mm	.03 A	3 mm	Not Qualified		60 dB	1.8 V	CAN ALSO OPERATE WITH 5 V SUPPLY			e0	BREAK-BEFORE-MAKE		240	24 ns	8 ohm	16 ns	.1 ohm	3 mm
ADG736BRM-REEL7	Analog Devices	SPDT	AUTOMOTIVE	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.001 mA	2	1	CMOS			GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm	.03 A	3 mm	Not Qualified		62 dB	1.8 V				e0	BREAK-BEFORE-MAKE			20 ns	12 ohm	10 ns	.1 ohm	3 mm
ADG704BRM	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	10	TSSOP	SQUARE	YES	UNSPECIFIED	.001 mA	1	4	CMOS			GULL WING			3 V		SMALL OUTLINE	TSSOP10,.19,20		.5 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified		60 dB	1.8 V	ALSO OPERATE WITH 5V SUPPLY	.4 V		e0	BREAK-BEFORE-MAKE	30	240	24 ns	8 ohm	16 ns	.4 ohm	3 mm	2 V
MAX4634EUB	Maxim Integrated	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.001 mA	1	4	CMOS			GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G10		1	5.5 V	1.1 mm	.05 A	3 mm	Not Qualified		80 dB	1.8 V				e0	BREAK-BEFORE-MAKE	20	240	24 ns	7 ohm	16 ns	.1 ohm	3 mm
TS5A23160DGSTE4	Texas Instruments	SPDT	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.001 mA	2	1			100 kHz	GULL WING			1.8 V	1.8/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NO/NC	64 dB	1.65 V		0 V		e4	MAKE-BEFORE-BREAK	30	260	14.5 ns	2.5 ohm	21.5 ns	.15 ohm	3 mm	5.5 V
STG3684AUTR	STMicroelectronics	SPDT	MILITARY	10	VQCCN	RECTANGULAR	YES	UNSPECIFIED		2	1	CMOS			NO LEAD			2.3 V	1.8/3.3	CHIP CARRIER, VERY THIN PROFILE	SOLCC10,.08,16	Multiplexer or Switches	.4 mm	125 Cel	-55 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	R-XQCC-N10	SEPARATE OUTPUT	1	4.3 V	.55 mm		1.4 mm	Not Qualified		66 dB	1.65 V	2-CHANNEL MUX/DEMUX			e4	BREAK-BEFORE-MAKE	30	260	85 ns	.7 ohm	30 ns	.1 ohm	1.8 mm
TS5A23159DGSRG4	Texas Instruments	SPDT	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.0005 mA	2	2			105 kHz	GULL WING			1.8 V	1.8/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified		64 dB	1.65 V	VIDEO APPLICATION	0 V		e4	BREAK-BEFORE-MAKE	30	260	55 ns	3.5 ohm	12 ns	.15 ohm	3 mm	5.5 V
TS5A23159DGSTG4	Texas Instruments	SPDT	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.0005 mA	2	2			105 kHz	GULL WING			1.8 V	1.8/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified		64 dB	1.65 V	VIDEO APPLICATION	0 V		e4	BREAK-BEFORE-MAKE	30	260	55 ns	3.5 ohm	12 ns	.15 ohm	3 mm	5.5 V
TS5A23160DGSRG4	Texas Instruments	SPDT	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.001 mA	2	1			100 kHz	GULL WING			1.8 V	1.8/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NO/NC	64 dB	1.65 V		0 V		e4	MAKE-BEFORE-BREAK	30	260	14.5 ns	2.5 ohm	21.5 ns	.15 ohm	3 mm	5.5 V
TS5A23160DGSTG4	Texas Instruments	SPDT	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.001 mA	2	2			100 kHz	GULL WING			1.8 V	1.8/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NO/NC	64 dB	1.65 V		0 V		e4	MAKE-BEFORE-BREAK	30	260	14.5 ns	3.5 ohm	21.5 ns	.15 ohm	3 mm	5.5 V
NLAS7222AMTR2G	Onsemi	DPDT	INDUSTRIAL	10	VQCCN	RECTANGULAR	YES	UNSPECIFIED		1	2	CMOS			NO LEAD			3.3 V	3.3	CHIP CARRIER, VERY THIN PROFILE	LCC10,.06X.07,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-XQCC-N10	SEPARATE OUTPUT	1	3.6 V	.8 mm		1.4 mm	Not Qualified		28 dB	3 V				e4	BREAK-BEFORE-MAKE	30	260	30 ns	9 ohm	25 ns	.35 ohm	1.8 mm
NLAS7222AMUR2G	Onsemi	DPDT	INDUSTRIAL	10	VQCCN	RECTANGULAR	YES	UNSPECIFIED		1	2	CMOS			NO LEAD			3.3 V	3.3	CHIP CARRIER, VERY THIN PROFILE	LCC10,.06X.07,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-XQCC-N10	SEPARATE OUTPUT	1	3.6 V	.6 mm		1.4 mm	Not Qualified		28 dB	3 V				e4	BREAK-BEFORE-MAKE	30	260	30 ns	9 ohm	25 ns	.35 ohm	1.8 mm
ADG736LBRMZ-REEL	Analog Devices	SPDT	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS			GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified		82 dB	1.8 V				e3	BREAK-BEFORE-MAKE		260	20 ns	8 ohm	10 ns	.1 ohm	3 mm
STG3384DTR	STMicroelectronics	SPST	MILITARY	10	VSON	RECTANGULAR	YES	PLASTIC/EPOXY		2	1	CMOS			NO LEAD			1.65 V	1.4/4.3	SMALL OUTLINE, VERY THIN PROFILE	SOLCC10,.11,20	Multiplexer or Switches	.5 mm	125 Cel	-55 Cel		DUAL	R-PDSO-N10	SEPARATE OUTPUT		4.3 V	.6 mm		1.4 mm	Not Qualified	NC	90 dB	1.4 V	MULTIPLE CLOSURE SWITCH ARRAY				BREAK-BEFORE-MAKE	NOT SPECIFIED	NOT SPECIFIED	60 ns	2.5 ohm	30 ns	.6 ohm	2.5 mm
NLAS4684FCTCG	Onsemi	SPDT	MILITARY	10	VFBGA	RECTANGULAR	YES	PLASTIC/EPOXY		2	1	CMOS			BALL			3 V	2/5	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA10,3X4,20	Multiplexer or Switches	.5 mm	125 Cel	-55 Cel	Tin/Silver/Copper (Sn/Ag/Cu)	BOTTOM	R-PBGA-B10	SEPARATE OUTPUT	1	5.5 V	.65 mm		1.465 mm	Not Qualified		65 dB	1.8 V				e1	BREAK-BEFORE-MAKE	40	260	60 ns	1 ohm	50 ns	.06 ohm	1.965 mm
ADG1222BRMZ	Analog Devices	SPST	AUTOMOTIVE	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS			GULL WING	-16.5 V	-15 V	15 V	12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	16.5 V	1.1 mm		3 mm	Not Qualified		75 dB	5 V	ALSO OPERATES AT 12V SINGLE SUPPLY		-5 V	e3	BREAK-BEFORE-MAKE	30	260	240 ns	200 ohm	140 ns	2.5 ohm	3 mm
ADG1223BRMZ	Analog Devices	SPST	AUTOMOTIVE	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS			GULL WING	-16.5 V	-15 V	15 V	12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	16.5 V	1.1 mm		3 mm	Not Qualified		75 dB	5 V	ALSO OPERATES AT 12V SINGLE SUPPLY		-5 V	e3	BREAK-BEFORE-MAKE	30	260	240 ns	200 ohm	140 ns	2.5 ohm	3 mm
NLAS52231MUR2G	Onsemi	SPDT	INDUSTRIAL	10	HVQCCN	RECTANGULAR	YES	UNSPECIFIED		1	1				NO LEAD			3 V	1.8/4.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC10,.06X.07,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-XQCC-N10	SEPARATE OUTPUT	1	4.5 V	.6 mm		1.4 mm	Not Qualified		62 dB	1.65 V				e4	BREAK-BEFORE-MAKE	30	260	50 ns	.46 ohm	30 ns	.05 ohm	1.8 mm
ADG772BCPZ-REEL	Analog Devices	SPDT	INDUSTRIAL	10	VQCCN	RECTANGULAR	YES	UNSPECIFIED	.001 mA	2	1	CMOS			NO LEAD			3.3 V	3/3.3	CHIP CARRIER, VERY THIN PROFILE	LCC10,.05X.06,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-XQCC-N10		1	3.6 V	.6 mm		1.3 mm	Not Qualified		73 dB	2.7 V				e4	BREAK-BEFORE-MAKE		260	12.5 ns	8.8 ohm	9.5 ns	.04 ohm	1.6 mm
TS3A24157RSERG4	Texas Instruments	SPDT	INDUSTRIAL	10	VQCCN	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	2	2			50 kHz	NO LEAD			1.8 V	1.8/3	CHIP CARRIER, VERY THIN PROFILE	LCC10,.06X.08,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N10	SEPARATE OUTPUT	1	1.95 V	.6 mm	.1 A	1.5 mm	Not Qualified		73 dB	1.65 V		0 V		e4	BREAK-BEFORE-MAKE	30	260	80 ns	1 ohm	40 ns	.15 ohm	2 mm	3.6 V
NLAS7222CMUTBG	Onsemi	DPDT	INDUSTRIAL	10	VQCCN	RECTANGULAR	YES	UNSPECIFIED		1	2	CMOS			NO LEAD			3.3 V	3.3	CHIP CARRIER, VERY THIN PROFILE	LCC10,.06X.07,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-XQCC-N10	SEPARATE OUTPUT	1	4.5 V	.6 mm		1.4 mm	Not Qualified		22 dB	1.65 V				e4	BREAK-BEFORE-MAKE	30	260	30 ns	10 ohm	20 ns	.85 ohm	1.8 mm
NLAS6234MUTBG	Onsemi	DPDT	INDUSTRIAL	10	VQCCN	RECTANGULAR	YES	UNSPECIFIED		2	2				NO LEAD			3.3 V	3.3	CHIP CARRIER, VERY THIN PROFILE	LCC10,.06X.07,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-XQCC-N10	SEPARATE OUTPUT		4.5 V	.6 mm		1.4 mm	Not Qualified		70 dB	2.7 V				e4	BREAK-BEFORE-MAKE		260		.55 ohm		.15 ohm	1.8 mm
ADG1421BCPZ-REEL7	Analog Devices	SPST	AUTOMOTIVE	10	HVSON	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS			NO LEAD	-5.5 V	-5 V	5 V	+-5/+-15/12	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.12,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-N10		3	5.5 V	.8 mm		3 mm	Not Qualified	NO	60 dB	4.5 V	ALSO OPERATES ON PLUS OR MINUS 15V AND PLUS 12V		-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	520 ns	7 ohm	395 ns	.04 ohm	3 mm
STG6684QTR	STMicroelectronics	SPDT	INDUSTRIAL	10	VQCCN	RECTANGULAR	YES	UNSPECIFIED		2	1	CMOS			NO LEAD			1.8 V	1.8/4	CHIP CARRIER, VERY THIN PROFILE	LCC10,.06X.07,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel		QUAD	R-XQCC-N10	SEPARATE OUTPUT		4.3 V	.55 mm		1.4 mm	Not Qualified		80 dB	1.65 V					BREAK-BEFORE-MAKE	NOT SPECIFIED	NOT SPECIFIED	85 ns	2.9 ohm		.3 ohm	1.8 mm
STG6384QTR	STMicroelectronics	SPST	INDUSTRIAL	10	VQCCN	RECTANGULAR	YES	UNSPECIFIED		2	1	CMOS			NO LEAD			1.8 V	1.8/4	CHIP CARRIER, VERY THIN PROFILE	LCC10,.06X.07,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel		QUAD	R-XQCC-N10	SEPARATE OUTPUT		4.3 V	.55 mm		1.4 mm	Not Qualified	NO	80 dB	1.65 V					BREAK-BEFORE-MAKE			85 ns	2.9 ohm		30 ohm	1.8 mm
ADG852BCPZ-REEL7	Analog Devices	SPDT	INDUSTRIAL	10	VQCCN	RECTANGULAR	YES	UNSPECIFIED		1	1	CMOS			NO LEAD			2.7 V	3/5	CHIP CARRIER, VERY THIN PROFILE	LCC10,.05X.06,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-XQCC-N10	SEPARATE OUTPUT	1	5.5 V	.6 mm		1.3 mm	Not Qualified	NO/NC	75 dB	1.8 V				e4	BREAK-BEFORE-MAKE		260	43 ns	1.5 ohm	8 ns	.03 ohm	1.6 mm
ADG854BCPZ-REEL	Analog Devices	SPDT	INDUSTRIAL	10	VQCCN	RECTANGULAR	YES	UNSPECIFIED		2	1	CMOS			NO LEAD			2.7 V	3/5	CHIP CARRIER, VERY THIN PROFILE	LCC10,.05X.06,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	R-XQCC-N10	SEPARATE OUTPUT	1	5.5 V	.6 mm		1.3 mm	Not Qualified		75 dB	1.8 V				e3	BREAK-BEFORE-MAKE		260	43 ns	1.5 ohm	8 ns	.03 ohm	1.6 mm
NLAS7223CMUTBG	Onsemi	DPDT	INDUSTRIAL	10	VQCCN	RECTANGULAR	YES	UNSPECIFIED		1	2				NO LEAD			3.3 V	1.8/4.3	CHIP CARRIER	LCC10,.06X.07,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-XQCC-N10	SEPARATE OUTPUT		4.5 V	.6 mm		1.4 mm	Not Qualified		21 dB	1.65 V				e4	BREAK-BEFORE-MAKE		260	30 ns		25 ns	.7 ohm	1.8 mm
MAX4685EUB	Maxim Integrated	SPDT	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1				GULL WING			3 V	3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified		64 dB	1.8 V				e0	BREAK-BEFORE-MAKE		245	50 ns	.8 ohm	30 ns	.06 ohm	3 mm
STG5223QTR	STMicroelectronics	SPDT	INDUSTRIAL	10	VQCCN	RECTANGULAR	YES	UNSPECIFIED		2	1	CMOS			NO LEAD			3.3 V	1.8/4	CHIP CARRIER, VERY THIN PROFILE	LCC10,.05X.06,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-XQCC-N10	SEPARATE OUTPUT	1	4.3 V	.55 mm		1.4 mm	Not Qualified		66 dB	1.65 V				e4	BREAK-BEFORE-MAKE			65 ns	.55 ohm	40 ns		1.8 mm
ADG704BRM-REEL	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.001 mA	1	4	CMOS			GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G10		1	5.5 V	1.1 mm	.03 A	3 mm	Not Qualified		60 dB	1.8 V	CAN ALSO OPERATE WITH 5 V SUPPLY			e0	BREAK-BEFORE-MAKE		240	24 ns	8 ohm	16 ns	.1 ohm	3 mm
MAX4734EUB	Maxim Integrated	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.001 mA	1	4	CMOS			GULL WING			1.8 V	3/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G10		1	3.6 V	1.1 mm	.15 A	3 mm	Not Qualified		56 dB	1.6 V				e0	BREAK-BEFORE-MAKE		245	30 ns	2 ohm	25 ns		3 mm
ADG836YRM-REEL	Analog Devices	SPDT	AUTOMOTIVE	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	2	CMOS			GULL WING			1.8 V	1.8/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	Tin/Lead (Sn85Pb15)	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	1.95 V	1.1 mm		3 mm	Not Qualified	NO/NC	67 dB	1.65 V	CAN ALSO OPERATE WITH 2.5V AND 3.3V SUPPLIES			e0	BREAK-BEFORE-MAKE	30	240	37 ns	1.4 ohm	9 ns	.1 ohm	3 mm
NLAS4684FCT1	Onsemi	SPDT	MILITARY	10	VFBGA	RECTANGULAR	YES	PLASTIC/EPOXY		2	1	CMOS			BALL			3 V	2/5	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA10,3X4,20	Multiplexer or Switches	.5 mm	125 Cel	-55 Cel	Tin/Lead (Sn/Pb)	BOTTOM	R-PBGA-B10	SEPARATE OUTPUT	1	5.5 V	.65 mm		1.465 mm	Not Qualified		65 dB	1.8 V				e0	BREAK-BEFORE-MAKE	30	240	60 ns	1 ohm	50 ns	.06 ohm	1.965 mm

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.