CROSS POINT SWITCH Multiplexers & Switches 131

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width (mm)	Qualification	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length
ADN4605ABPZ	Analog Devices	CROSS POINT SWITCH		352		SQUARE	YES	PLASTIC/EPOXY					BALL					GRID ARRAY						MATTE TIN	BOTTOM	S-PBGA-B352		3				Not Qualified					e3		30	260
ADV3205JSTZ	Analog Devices	CROSS POINT SWITCH	COMMERCIAL	100	LFQFP	SQUARE	YES	PLASTIC/EPOXY		1	16	BIPOLAR	GULL WING	-5.5 V	-5 V	5 V	+-5	FLATPACK, LOW PROFILE, FINE PITCH	QFP100,.63SQ,20	Multiplexer or Switches	.5 mm	70 Cel	0 Cel	MATTE TIN	QUAD	S-PQFP-G100	SEPARATE OUTPUT	3	5.5 V	1.6 mm	14 mm	Not Qualified	100 dB	4.5 V		-4.5 V	e3		30	260					14 mm
SN55LVCP22W/EM	Texas Instruments	CROSS POINT SWITCH	MILITARY	16	DFP	RECTANGULAR	YES	CERAMIC, GLASS-SEALED	.087 mA	2			FLAT			3.3 V	3.3	FLATPACK	FL16,.25	Multiplexer or Switches	1.27 mm	125 Cel	-55 Cel	TIN LEAD	DUAL	R-GDFP-F16	SEPARATE OUTPUT		3.6 V	2.03 mm	6.73 mm	Not Qualified		3 V			e0								10.3 mm
ADG2128WBCPZ-REEL7	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	32	HVQCCN	SQUARE	YES	UNSPECIFIED		1	12	CMOS	NO LEAD	-5.5 V	-5 V	5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N32		3	5.5 V	.8 mm	5 mm			4.5 V	ALSO HAS 12V SINGLE SUPPLY	-4.5 V	e3		30	260		75 ohm		4.5 ohm	5 mm
ADN4600ACPZ-R7	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	64	HVQCCN	SQUARE	YES	UNSPECIFIED		1	8		NO LEAD			1.8 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N64		3	3.6 V	1 mm	9 mm			1.7 V			e3		30	260					9 mm
DS90CP02SPX/NOPB	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	28	QCCN	SQUARE	YES	PLASTIC/EPOXY		1		CMOS	NO LEAD			3.3 V	3.3	CHIP CARRIER	LCC28,.2SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-N28	SEPARATE OUTPUT	3				Not Qualified					e3	BREAK-BEFORE-MAKE	30	260	150 ns
NB7L72MMNHTBG	Onsemi	CROSS POINT SWITCH	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED		1	2		NO LEAD			2.5 V	2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL GOLD PALLADIUM	QUAD	S-XQCC-N16	SEPARATE OUTPUT	1	2.625 V	1 mm	3 mm	Not Qualified		2.375 V	ALSO OPERATES IN SUPPLY VOLTAGE 3 TO 3.6V WITH 3.3V NOMINAL				30	260					3 mm
ADW54012Z-0REEL7	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	32	HVQCCN	SQUARE	YES	UNSPECIFIED		1	8	CMOS	NO LEAD	-5.5 V	-5 V	5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N32		3	5.5 V	.8 mm	5 mm		66 dB	4.5 V	CAN ALSO OPERATES AT 12 V SUPPLY	-4.5 V	e3			260	215 ns	75 ohm	255 ns	4.5 ohm	5 mm
ADN4612ACPZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	88	HVQCCN	SQUARE	YES	UNSPECIFIED		1	12		NO LEAD			2.5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N88		3	2.75 V	.85 mm	12 mm			2.25 V	ALSO REQUIRED ANALOG REFERENCE VOLTAGE 1.6 TO 2V		e3		30	260					12 mm
MAX456CPL	Maxim Integrated	CROSS POINT SWITCH	COMMERCIAL	40	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1	8	CMOS	THROUGH-HOLE		-5 V	5 V	+-5	IN-LINE	DIP40,.6	Multiplexer or Switches	2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDIP-T40	SEPARATE OUTPUT	1	5.5 V	5.08 mm	15.24 mm	Not Qualified	80 dB	4.5 V	VIDEO APPLICATION		e0			245		600 ohm			52.075 mm
MAX458CPL	Maxim Integrated	CROSS POINT SWITCH	COMMERCIAL	40	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1	8	CMOS	THROUGH-HOLE		-5 V	5 V	+-5	IN-LINE	DIP40,.6	Multiplexer or Switches	2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDIP-T40		1	5.25 V	5.08 mm	15.24 mm	Not Qualified		4.75 V			e0								52.075 mm
MAX459CQH	Maxim Integrated	CROSS POINT SWITCH	COMMERCIAL	44	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	8	CMOS	J BEND		-5 V	5 V	+-5	CHIP CARRIER	LDCC44,.7SQ	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	TIN LEAD	QUAD	S-PQCC-J44		2	5.25 V	4.57 mm	16.585 mm	Not Qualified		4.75 V			e0			245					16.585 mm
MAX4550EWI	Maxim Integrated	CROSS POINT SWITCH	INDUSTRIAL	28	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	4	CMOS	GULL WING	-5.5 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE	SOP28,.4	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G28	SEPARATE OUTPUT	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	55 dB	2.7 V	VIDEO APPLICATION, ALSO OPERATES WITH 2.7 TO 5.5 SINGLE SUPPLY	-2.7 V	e0	BREAK-BEFORE-MAKE		245	900 ns	80 ohm	500 ns	5 ohm	17.9 mm
MAX4456CPL	Maxim Integrated	CROSS POINT SWITCH	COMMERCIAL	40	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1	8	CMOS	THROUGH-HOLE	-5.5 V	-5 V	5 V	+-5	IN-LINE	DIP40,.6	Multiplexer or Switches	2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDIP-T40	SEPARATE OUTPUT	1	5.5 V	5.08 mm	15.24 mm	Not Qualified	80 dB	4.5 V	VIDEO APPLICATION	-4.5 V	e0				50 ns		35 ns		52.075 mm
MAX4456EPL	Maxim Integrated	CROSS POINT SWITCH	INDUSTRIAL	40	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1	8	CMOS	THROUGH-HOLE	-5.5 V	-5 V	5 V	+-5	IN-LINE	DIP40,.6	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T40	SEPARATE OUTPUT	1	5.5 V	5.08 mm	15.24 mm	Not Qualified	80 dB	4.5 V	VIDEO APPLICATION	-4.5 V	e0				50 ns		35 ns		52.075 mm
MAX4550CWI	Maxim Integrated	CROSS POINT SWITCH	COMMERCIAL	28	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	4	CMOS	GULL WING	-5.5 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE	SOP28,.4	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G28	SEPARATE OUTPUT	1	5.25 V	2.65 mm	7.5 mm	Not Qualified	63 dB	2.7 V	VIDEO APPLICATION, ALSO OPERATES WITH 2.7 TO 5.5 SINGLE SUPPLY	-2.7 V	e0	BREAK-BEFORE-MAKE		245	900 ns	80 ohm	500 ns	5 ohm	17.9 mm
MAX4548EAX	Maxim Integrated	CROSS POINT SWITCH	INDUSTRIAL	36	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	3		GULL WING			3 V	3/5	SMALL OUTLINE, SHRINK PITCH	SOP36,.4,32	Multiplexer or Switches	.8 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G36	SEPARATE OUTPUT	1	3.3 V	2.64 mm	7.495 mm	Not Qualified	85 dB	2.7 V	CAN ALSO OPERATE WITH 5V SUPPLY		e0	BREAK-BEFORE-MAKE		245	1000 ns	60 ohm	500 ns	5 ohm	15.415 mm
MAX4549EAX	Maxim Integrated	CROSS POINT SWITCH	INDUSTRIAL	36	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	3		GULL WING			3 V	3/5	SMALL OUTLINE, SHRINK PITCH	SOP36,.4,32	Multiplexer or Switches	.8 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G36	SEPARATE OUTPUT	1	3.3 V	2.64 mm	7.495 mm	Not Qualified	85 dB	2.7 V	CAN ALSO OPERATE WITH 5V SUPPLY		e0	BREAK-BEFORE-MAKE		245	1000 ns	60 ohm	500 ns	5 ohm	15.415 mm
AD75019JP	Analog Devices	CROSS POINT SWITCH	COMMERCIAL	44	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	16	BICMOS	J BEND		-12 V	12 V	5,+-12	CHIP CARRIER	LDCC44,.7SQ	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	TIN LEAD	QUAD	S-PQCC-J44		3		4.57 mm	16.5862 mm	Not Qualified	92 dB				e0			225		300 ohm		20 ohm	16.5862 mm
MAX4359EAX	Maxim Integrated	CROSS POINT SWITCH	INDUSTRIAL	36	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	4		GULL WING	-5.5 V	-5 V	5 V	+-5	SMALL OUTLINE, SHRINK PITCH	SOP36,.4,32	Multiplexer or Switches	.8 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G36	SEPARATE OUTPUT	1	5.5 V	2.64 mm	7.495 mm	Not Qualified	80 dB	4.5 V	VIDEO APPLICATION	-4.5 V	e0	BREAK-BEFORE-MAKE			50 ns		35 ns		15.415 mm
MAX4359EWG	Maxim Integrated	CROSS POINT SWITCH	INDUSTRIAL	24	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	4		GULL WING	-5.5 V	-5 V	5 V	+-5	SMALL OUTLINE	SOP24,.4	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G24	SEPARATE OUTPUT	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	80 dB	4.5 V	VIDEO APPLICATION	-4.5 V	e0	BREAK-BEFORE-MAKE			50 ns		35 ns		15.4 mm
MAX4360EAX	Maxim Integrated	CROSS POINT SWITCH	INDUSTRIAL	36	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	8		GULL WING	-5.5 V	-5 V	5 V	+-5	SMALL OUTLINE, SHRINK PITCH	SOP36,.4,32	Multiplexer or Switches	.8 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G36	SEPARATE OUTPUT	1	5.5 V	2.64 mm	7.495 mm	Not Qualified	80 dB	4.5 V	VIDEO APPLICATION	-4.5 V	e0	BREAK-BEFORE-MAKE		245	50 ns		35 ns		15.415 mm
MAX3640UCM	Maxim Integrated	CROSS POINT SWITCH	OTHER	48	LFQFP	SQUARE	YES	PLASTIC/EPOXY		1	8		GULL WING			3.3 V	3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20	Multiplexer or Switches	.5 mm	85 Cel	0 Cel	TIN LEAD	QUAD	S-PQFP-G48	SEPARATE OUTPUT	1	3.6 V	1.6 mm	7 mm	Not Qualified		3 V			e0								7 mm
NB4L858MFAG	Onsemi	CROSS POINT SWITCH	INDUSTRIAL	32	LQFP	SQUARE	YES	PLASTIC/EPOXY		1	2		GULL WING			3.3 V		FLATPACK, LOW PROFILE			.8 mm	85 Cel	-40 Cel	TIN	QUAD	S-PQFP-G32		2	3.6 V	1.6 mm	7 mm	Not Qualified		2.3 V	IT CAN ALSO OPERATE WITH 2.5V SUPPLY		e3		30	260					7 mm
NB4L858MFAR2G	Onsemi	CROSS POINT SWITCH	INDUSTRIAL	32	LQFP	SQUARE	YES	PLASTIC/EPOXY		1	2		GULL WING			3.3 V		FLATPACK, LOW PROFILE			.8 mm	85 Cel	-40 Cel	TIN	QUAD	S-PQFP-G32		2	3.6 V	1.6 mm	7 mm	Not Qualified		2.3 V	IT CAN ALSO OPERATE WITH 2.5V SUPPLY		e3		30	260					7 mm
NB6L72MMNG	Onsemi	CROSS POINT SWITCH	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED		1	2		NO LEAD			2.5 V	2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL GOLD PALLADIUM	QUAD	S-XQCC-N16		1	3.63 V	1 mm	3 mm	Not Qualified		2.375 V	ALSO OPERATES WITH 0V -3.63V SUPPLY				30	260	.48 ns		.48 ns		3 mm
NB6L72MNG	Onsemi	CROSS POINT SWITCH	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED		1	2		NO LEAD			2.5 V	2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL GOLD PALLADIUM	QUAD	S-XQCC-N16		1	3.63 V	1 mm	3 mm	Not Qualified		2.375 V	NECL MODE: 0V GND WITH VEE = -2.375V TO -3.63V; IT ALSO WORKS ON 3.3 V SUPPLY				30	260	.16 ns		.16 ns		3 mm
AD8117ABPZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	304	BGA	SQUARE	YES	PLASTIC/EPOXY		1	32	BIPOLAR	BALL		-2.5 V	2.5 V	+-2.5	GRID ARRAY	BGA304,23X23,50	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	S-PBGA-B304	SEPARATE OUTPUT	3		1.765 mm	31 mm	Not Qualified	90 dB		CAN ALSO OPERATE WITH 5V SINGLE SUPPLY		e1			260					31 mm
AD8118ABPZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	304	BGA	SQUARE	YES	PLASTIC/EPOXY		1	32	BIPOLAR	BALL		-2.5 V	2.5 V	+-2.5	GRID ARRAY	BGA304,23X23,50	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	S-PBGA-B304	SEPARATE OUTPUT	3		1.765 mm	31 mm	Not Qualified	90 dB		CAN ALSO OPERATE WITH 5V SINGLE SUPPLY		e1			260					31 mm
ADG799ABCPZ-REEL	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	24	VQCCN	SQUARE	YES	UNSPECIFIED		1	3	CMOS	NO LEAD			3 V	3/5	CHIP CARRIER, VERY THIN PROFILE	LCC24,.16SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N24	SEPARATE OUTPUT	3	3.3 V	1 mm	4 mm	Not Qualified	60 dB	2.7 V	ALSO OPERATE AT 5V SUPPLY		e3	BREAK-BEFORE-MAKE		260	266 ns	5.5 ohm	260 ns	1.85 ohm	4 mm
ADG799GBCPZ-REEL	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	24	VQCCN	SQUARE	YES	UNSPECIFIED		1	3	CMOS	NO LEAD			3 V	3/5	CHIP CARRIER, VERY THIN PROFILE	LCC24,.16SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N24	SEPARATE OUTPUT	3	3.3 V	1 mm	4 mm	Not Qualified	60 dB	2.7 V	ALSO OPERATE AT 5V SUPPLY		e3	BREAK-BEFORE-MAKE		260	266 ns	5.5 ohm	260 ns	1.85 ohm	4 mm
ADG2108BCPZ-HS-RL7	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	32	HVQCCN	SQUARE	YES	UNSPECIFIED		1	10	CMOS	NO LEAD			12 V	+-5/12	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N32	SEPARATE OUTPUT	3	13.2 V	1 mm	5 mm	Not Qualified	69 dB	10.8 V			e3	MAKE-BEFORE-BREAK			185 ns	50 ohm	250 ns	4.5 ohm	5 mm
ADG2108BCPZ-R2	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	32	HVQCCN	SQUARE	YES	UNSPECIFIED		1	10	CMOS	NO LEAD			12 V	+-5/12	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N32	SEPARATE OUTPUT		13.2 V	1 mm	5 mm	Not Qualified	69 dB	10.8 V			e3	MAKE-BEFORE-BREAK			185 ns	50 ohm	250 ns	4.5 ohm	5 mm
ADG2108BCPZ-REEL7	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	32	HVQCCN	SQUARE	YES	UNSPECIFIED		1	10	CMOS	NO LEAD			12 V	+-5/12	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N32	SEPARATE OUTPUT	3	13.2 V	1 mm	5 mm	Not Qualified	69 dB	10.8 V			e3	MAKE-BEFORE-BREAK			185 ns	50 ohm	250 ns	4.5 ohm	5 mm
ADG2108YCPZ-HS-RL7	Analog Devices	CROSS POINT SWITCH	AUTOMOTIVE	32	HVQCCN	SQUARE	YES	UNSPECIFIED		1	10	CMOS	NO LEAD	-5.5 V	-5 V	5 V	+-5/12	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N32	SEPARATE OUTPUT	3	5.5 V	1 mm	5 mm	Not Qualified	64 dB	4.5 V		-4.5 V	e3	MAKE-BEFORE-BREAK			200 ns	75 ohm	250 ns	4.5 ohm	5 mm
ADG2108YCPZ-REEL7	Analog Devices	CROSS POINT SWITCH	AUTOMOTIVE	32	HVQCCN	SQUARE	YES	UNSPECIFIED		1	10	CMOS	NO LEAD	-5.5 V	-5 V	5 V	+-5/12	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N32	SEPARATE OUTPUT	3	5.5 V	1 mm	5 mm	Not Qualified	64 dB	4.5 V		-4.5 V	e3	MAKE-BEFORE-BREAK			200 ns	75 ohm	250 ns	4.5 ohm	5 mm
ADG2188BCPZ-HS-RL7	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	32	HVQCCN	SQUARE	YES	UNSPECIFIED		1	8	CMOS	NO LEAD			12 V	+-5/12	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N32	SEPARATE OUTPUT	3	13.2 V	1 mm	5 mm	Not Qualified	69 dB	10.8 V	CAN ALSO OPERATES AT +/-12 V SUPPLY		e3	MAKE-BEFORE-BREAK		260	185 ns	50 ohm	250 ns	4.5 ohm	5 mm
ADG2188YCPZ-HS-RL7	Analog Devices	CROSS POINT SWITCH	AUTOMOTIVE	32	HVQCCN	SQUARE	YES	UNSPECIFIED		1	8	CMOS	NO LEAD	-5.5 V	-5 V	5 V	+-5/12	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N32	SEPARATE OUTPUT	3	5.5 V	1 mm	5 mm	Not Qualified	64 dB	4.5 V	CAN ALSO OPERATES AT +/-12 V SUPPLY	-4.5 V	e3	MAKE-BEFORE-BREAK		260	200 ns	75 ohm	250 ns	4.5 ohm	5 mm
AD8175ABPZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	676	BGA	SQUARE	YES	PLASTIC/EPOXY		1	16		BALL		-2.5 V	2.5 V	+-2.5	GRID ARRAY	BGA676,26X26,40	Multiplexer or Switches	1 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	S-PBGA-B676	SEPARATE OUTPUT	3		2.45 mm	27 mm	Not Qualified	94 dB		ALSO OPERATES ON 5V SINGLE SUPPLY		e1			260					27 mm
AD8156ABCZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	49	BGA	SQUARE	YES	PLASTIC/EPOXY		1	4		BALL			3.3 V		GRID ARRAY			1 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	S-PBGA-B49		3	3.6 V	1.85 mm	8 mm	Not Qualified		3 V			e1			260					8 mm
AD8176ABPZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	676	BGA	SQUARE	YES	PLASTIC/EPOXY		1	16		BALL		-2.5 V	2.5 V	2.5	GRID ARRAY	BGA676,26X26,40	Multiplexer or Switches	1 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	S-PBGA-B676		3		2.43 mm	27 mm	Not Qualified	90 dB		ALSO OPERATE WITH 5V SINGLE SUPPLY		e1			260					27 mm
AD8104ABPZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	304	BGA	SQUARE	YES	PLASTIC/EPOXY		1	32		BALL		-2.5 V	2.5 V	+-2.5/5	GRID ARRAY	BGA304,23X23,50	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	S-PBGA-B304	SEPARATE OUTPUT	3		1.765 mm	31 mm	Not Qualified	90 dB				e1			260					31 mm
AD8105ABPZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	304	BGA	SQUARE	YES	PLASTIC/EPOXY		1	32		BALL		-2.5 V	2.5 V	+-2.5/5	GRID ARRAY	BGA304,23X23,50	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	S-PBGA-B304	SEPARATE OUTPUT	3		1.765 mm	31 mm	Not Qualified	90 dB				e1			260					31 mm
AD8177ABPZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	676	BGA	SQUARE	YES	PLASTIC/EPOXY		1	16		BALL		-2.5 V	2.5 V		GRID ARRAY			1 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	S-PBGA-B676		3		2.43 mm	27 mm	Not Qualified	94 dB		ALSO OPERATE WITH 5V SINGLE SUPPLY		e1			260					27 mm
SN65LVCP402RGER	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	24	HVQCCN	SQUARE	YES	PLASTIC/EPOXY	115 mA	1	2		NO LEAD			3.3 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N24	SEPARATE OUTPUT	3	3.465 V	1 mm	4 mm	Not Qualified		3.135 V			e4		30	260	.7 ns		.7 ns		4 mm
MAX4355ECQ-TD	Maxim Integrated	CROSS POINT SWITCH	INDUSTRIAL	100	TFQFP	SQUARE	YES	PLASTIC/EPOXY		1	16	BICMOS	GULL WING	-5.25 V	-3 V	3 V		FLATPACK, THIN PROFILE, FINE PITCH			.5 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQFP-G100		3	5.25 V	1.2 mm	14 mm	Not Qualified	112 dB	2.25 V		-2.25 V	e0								14 mm
AD8158ACPZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	100	HVQCCN	SQUARE	YES	UNSPECIFIED		1	2		NO LEAD			1.8 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.4 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N100		3	3.3 V	.9 mm	12 mm	Not Qualified		1.6 V			e3		30	260					12 mm
ADN4600ACPZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	64	HVQCCN	SQUARE	YES	UNSPECIFIED		1	8		NO LEAD			1.8 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N64		3	3.6 V	1 mm	9 mm	Not Qualified		1.7 V			e3		30	260					9 mm

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.