RECTANGULAR Multiplexers & Switches 2,220

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Screening Level	Nominal Bandwidth	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Package Style (Meter)	Package Equivalence Code	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Maximum Signal Current	Width (mm)	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Input Voltage	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length	Maximum Input Voltage
PI3USB3102QZLEX	Diodes Incorporated	DIFFERENTIAL MULTIPLEXER		32	HVQCCN	RECTANGULAR	YES		2 mA	1	2		AEC-Q100		NO LEAD			3.3 V	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.12X.24,16	.4 mm	85 Cel	-40 Cel		QUAD	R-XQCC-N32	SEPARATE OUTPUT		3.63 V	.8 mm		3 mm		22 dB	2.97 V									13 ohm			6 mm
ADG719SRJZ-EP-R2	Analog Devices	SPDT	MILITARY	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	1	1	CMOS			GULL WING			3 V	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	.95 mm	125 Cel	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	5.5 V	1.45 mm	.03 A	1.6 mm		67 dB	1.8 V	ALSO OPEARTES AT 5 V SUPPLY	0 V		e4	BREAK-BEFORE-MAKE	30	260	15 ns	12 ohm	8 ns	.1 ohm	2.9 mm	5.5 V
ADG658TRUZ-EP	Analog Devices	SINGLE-ENDED MULTIPLEXER	MILITARY	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	1	8	CMOS			GULL WING	-6 V	-5 V	5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	.65 mm	125 Cel	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	COMMON OUTPUT	1	6 V	1.2 mm	.02 A	4.4 mm	NC	90 dB	2 V	ALSO OPERATES AT 2 TO 12 V SUPPLY		-2 V	e4	BREAK-BEFORE-MAKE	30	260	165 ns	75 ohm	55 ns	1.3 ohm	5 mm
ADG658TRUZ-EP-RL7	Analog Devices	SINGLE-ENDED MULTIPLEXER	MILITARY	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	1	8	CMOS			GULL WING	-6 V	-5 V	5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	.65 mm	125 Cel	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	COMMON OUTPUT	1	6 V	1.2 mm	.02 A	4.4 mm	NC	90 dB	2 V	ALSO OPERATES AT 2 TO 12 V SUPPLY		-2 V	e4	BREAK-BEFORE-MAKE	30	260	165 ns	75 ohm	55 ns	1.3 ohm	5 mm
NL3S22UHMUTAG	Onsemi	DPDT	INDUSTRIAL	10	VQCCN	RECTANGULAR	YES	UNSPECIFIED		1	2				NO LEAD			3 V	CHIP CARRIER, VERY THIN PROFILE		.4 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-XQCC-N10		1	3.7 V	.6 mm		1.4 mm		25 dB	2.7 V				e4		30	260		6.63 ohm		.2 ohm	1.8 mm
TUSB1146IRNQR	Texas Instruments	CROSS POINT SWITCH	COMMERCIAL	40	HVQCCN	RECTANGULAR	YES	PLASTIC/EPOXY		1	5				NO LEAD			3.3 V	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.17X.25,16	.4 mm	70 Cel	0 Cel	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N40	COMMON OUTPUT	1	3.6 V	.8 mm		4 mm			3 V				e4		30	260	500 ns	10 ohm	500 ns	2.5 ohm	6 mm
TUSB1146IRNQT	Texas Instruments	CROSS POINT SWITCH	COMMERCIAL	40	HVQCCN	RECTANGULAR	YES	PLASTIC/EPOXY		1	5				NO LEAD			3.3 V	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.17X.25,16	.4 mm	70 Cel	0 Cel	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N40	COMMON OUTPUT	1	3.6 V	.8 mm		4 mm			3 V				e4		30	260	500 ns	10 ohm	500 ns	2.5 ohm	6 mm
TUSB1146RNQR	Texas Instruments	CROSS POINT SWITCH	COMMERCIAL	40	HVQCCN	RECTANGULAR	YES	PLASTIC/EPOXY		1	5				NO LEAD			3.3 V	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.17X.25,16	.4 mm	70 Cel	0 Cel	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N40	COMMON OUTPUT	1	3.6 V	.8 mm		4 mm			3 V				e4		30	260	500 ns	10 ohm	500 ns	2.5 ohm	6 mm
TMUX1308QBQBRQ1	Texas Instruments	SINGLE-ENDED MULTIPLEXER	AUTOMOTIVE	16	HVQCCN	RECTANGULAR	YES	UNSPECIFIED	.001 mA	1	1	CMOS	AEC-Q100	500 kHz	NO LEAD			1.8 V	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.1X.14,20	.5 mm	125 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-XQCC-N16	COMMON OUTPUT	2	5.5 V	.8 mm	.025 A	2.5 mm	NO	90 dB	1.62 V				e4	BREAK-BEFORE-MAKE	30	260	75 ns	750 ohm	85 ns	10 ohm	3.5 mm
TMUXHS4412IRUAT	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	42	HVQCCN	RECTANGULAR	YES	PLASTIC/EPOXY	.48 mA	4	4				NO LEAD			1.8 V	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC42,.14X.35,20	.5 mm	105 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N42	SEPARATE OUTPUT	2	4 V	.8 mm		3.5 mm		12 dB	1.71 V				e4		30	260	130 ns	8 ohm	100 ns		9 mm
TMUXHS4412RUAT	Texas Instruments	SINGLE-ENDED MULTIPLEXER	COMMERCIAL	42	HVQCCN	RECTANGULAR	YES	PLASTIC/EPOXY	.48 mA	4	4				NO LEAD			1.8 V	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC42,.14X.35,20	.5 mm	70 Cel	0 Cel	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N42	SEPARATE OUTPUT	2	4 V	.8 mm		3.5 mm		12 dB	1.71 V				e4		30	260	130 ns	8 ohm	100 ns		9 mm
TS3DV642RUATQ1	Texas Instruments	DIFFERENTIAL MULTIPLEXER		42	HVQCCN	RECTANGULAR	YES	PLASTIC/EPOXY		1	12		AEC-Q100		NO LEAD			3.3 V	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC42,.14X.35,20	.5 mm	105 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N42	SEPARATE OUTPUT	2	3.6 V	.8 mm		3.5 mm	NC	15 dB	3 V		0 V		e4		30	260	100000 ns	12 ohm			9 mm	5.5 V

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.