SQUARE Multiplexers & Switches 427

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Screening Level	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Maximum Signal Current	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Input Voltage	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length	Maximum Input Voltage
TDA19997HL/C1,518	NXP Semiconductors		COMMERCIAL	100	QFP	SQUARE	YES	PLASTIC/EPOXY				CMOS		GULL WING				1.8,3.3	FLATPACK	QFP100,.63SQ,20	Multiplexer or Switches	.5 mm	70 Cel	0 Cel		QUAD	S-PQFP-G100							Not Qualified
TDA19997HL/C1,551	NXP Semiconductors		COMMERCIAL	100	QFP	SQUARE	YES	PLASTIC/EPOXY				CMOS		GULL WING				1.8,3.3	FLATPACK	QFP100,.63SQ,20	Multiplexer or Switches	.5 mm	70 Cel	0 Cel		QUAD	S-PQFP-G100							Not Qualified
TDA19997HL/C1,557	NXP Semiconductors		COMMERCIAL	100	QFP	SQUARE	YES	PLASTIC/EPOXY				CMOS		GULL WING				1.8,3.3	FLATPACK	QFP100,.63SQ,20	Multiplexer or Switches	.5 mm	70 Cel	0 Cel		QUAD	S-PQFP-G100							Not Qualified
NX3L2467HR,115	NXP Semiconductors	DPDT	AUTOMOTIVE	16	QCCN	SQUARE	YES	PLASTIC/EPOXY		2		CMOS		NO LEAD				1.5/3.3	CHIP CARRIER	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N16	SEPARATE OUTPUT	1					Not Qualified							e4	BREAK-BEFORE-MAKE	30	260	90 ns	4.1 ohm
NX3L4051HR-Q100X	NXP Semiconductors	SINGLE-ENDED MULTIPLEXER	AUTOMOTIVE	16	QCCN	SQUARE	YES	PLASTIC/EPOXY	.006 mA	1	8	CMOS	AEC-Q100	NO LEAD				1.4/4.3	CHIP CARRIER	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel		QUAD	S-PQCC-N16		1					Not Qualified								BREAK-BEFORE-MAKE		260	100 ns	4.1 ohm
NX3L4053HR-Q100X	NXP Semiconductors	SPDT	AUTOMOTIVE	16	QCCN	SQUARE	YES	PLASTIC/EPOXY		3		CMOS	AEC-Q100	NO LEAD				1.4/4.3	CHIP CARRIER	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel		QUAD	S-PQCC-N16	SEPARATE OUTPUT	1					Not Qualified								BREAK-BEFORE-MAKE		260	90 ns	4.2 ohm
CBTL06141EE/G,118	NXP Semiconductors		OTHER	48	FBGA	SQUARE	YES	PLASTIC/EPOXY	1 mA	3	4			BALL			3.3 V	3.3	GRID ARRAY, FINE PITCH	BGA48,9X9,20	Multiplexer or Switches	.5 mm	85 Cel	-10 Cel		BOTTOM	S-PBGA-B48		1					Not Qualified										260
ADN4605ABPZ	Analog Devices	CROSS POINT SWITCH		352		SQUARE	YES	PLASTIC/EPOXY						BALL					GRID ARRAY						MATTE TIN	BOTTOM	S-PBGA-B352		3					Not Qualified							e3		30	260
ADG1411WBCPZ-REEL	Analog Devices	SPST	AUTOMOTIVE	16	HVQCCN	SQUARE	YES	UNSPECIFIED		4	1	CMOS	AEC-Q100	NO LEAD	-16.5 V	-5 V	5 V	+-5/12/+-15	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N16	SEPARATE OUTPUT	3	16.5 V	1 mm		4 mm	Not Qualified	NC	80 dB	4.5 V			-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	510 ns	5.4 ohm	380 ns	.13 ohm	4 mm
ADG5404BCPZ-REEL7	Analog Devices	SINGLE-ENDED MULTIPLEXER	AUTOMOTIVE	16	HVQCCN	SQUARE	YES	UNSPECIFIED		1	4	CMOS		NO LEAD	-22 V	-15 V	15 V	+-9/+-22/9/40	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N16		3	22 V	.8 mm	.03 A	4 mm	Not Qualified		78 dB	9 V			-9 V	e3	BREAK-BEFORE-MAKE	30	260	278 ns	16 ohm	183 ns	.7 ohm	4 mm
ADG5408BCPZ-REEL7	Analog Devices	SINGLE-ENDED MULTIPLEXER	AUTOMOTIVE	16	HVQCCN	SQUARE	YES	UNSPECIFIED	.13 mA	1	8	CMOS		NO LEAD	-22 V	-15 V	15 V	+-9/+-22/9/40	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N16		3	22 V	.8 mm	.03 A	4 mm	Not Qualified		60 dB	9 V			-9 V	e3	BREAK-BEFORE-MAKE	30	260	242 ns	22 ohm	198 ns	.8 ohm	4 mm
ADG5409BCPZ-REEL7	Analog Devices	DIFFERENTIAL MULTIPLEXER	AUTOMOTIVE	16	HVQCCN	SQUARE	YES	UNSPECIFIED	.13 mA	1	4	CMOS		NO LEAD	-22 V	-15 V	15 V	+-9/+-22/9/40	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N16		3	22 V	.8 mm	.03 A	4 mm	Not Qualified		60 dB	9 V			-9 V	e3	BREAK-BEFORE-MAKE	30	260	242 ns	22 ohm	198 ns	.8 ohm	4 mm
ADV3205JSTZ	Analog Devices	CROSS POINT SWITCH	COMMERCIAL	100	LFQFP	SQUARE	YES	PLASTIC/EPOXY		1	16	BIPOLAR		GULL WING	-5.5 V	-5 V	5 V	+-5	FLATPACK, LOW PROFILE, FINE PITCH	QFP100,.63SQ,20	Multiplexer or Switches	.5 mm	70 Cel	0 Cel	MATTE TIN	QUAD	S-PQFP-G100	SEPARATE OUTPUT	3	5.5 V	1.6 mm		14 mm	Not Qualified		100 dB	4.5 V			-4.5 V	e3		30	260					14 mm
HD3SS212ZQER	Texas Instruments	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	48	BGA	SQUARE	YES	PLASTIC/EPOXY	5 mA	1	2			BALL			3.3 V		GRID ARRAY			.5 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	S-PBGA-B48	COMMON OUTPUT	3	3.6 V	.74 mm		5 mm		NO	22 dB	3 V				e1		30	260	350 ns	12 ohm	350 ns	1.5 ohm	5 mm
HD3SS212ZQET	Texas Instruments	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	48	BGA	SQUARE	YES	PLASTIC/EPOXY	5 mA	1	2			BALL			3.3 V		GRID ARRAY			.5 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	S-PBGA-B48	COMMON OUTPUT	3	3.6 V	1 mm		5 mm		NO	22 dB	3 V				e1		30	260	350 ns	12 ohm	350 ns	1.5 ohm	5 mm
NX3DV3899HR,115	NXP Semiconductors	DPDT	AUTOMOTIVE	16	QCCN	SQUARE	YES	PLASTIC/EPOXY		2				NO LEAD				1.4/4.3	CHIP CARRIER	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	Matte Tin (Sn)	QUAD	S-PQCC-N16	SEPARATE OUTPUT	1					Not Qualified							e3	BREAK-BEFORE-MAKE	30	260	90 ns	10 ohm
NX3L2T384GM,125	NXP Semiconductors	SPDT	AUTOMOTIVE	8	VQCCN	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS		NO LEAD			1.65 V	1.4/4.3	CHIP CARRIER, VERY THIN PROFILE	LCC8,.06SQ,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N8		1	4.3 V	.5 mm		1.6 mm	Not Qualified	NO	90 dB	1.4 V				e4		30	260	120 ns	1.7 ohm	60 ns	.04 ohm	1.6 mm
NX3L4053HR,115	NXP Semiconductors	SPDT	AUTOMOTIVE	16	QCCN	SQUARE	YES	PLASTIC/EPOXY		3		CMOS		NO LEAD				1.4/4.3	CHIP CARRIER	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	Matte Tin (Sn)	QUAD	S-PQCC-N16	SEPARATE OUTPUT	1					Not Qualified							e3	BREAK-BEFORE-MAKE	30	260	90 ns	4.2 ohm
NX3L4684TK,132	NXP Semiconductors		AUTOMOTIVE	10	HVSON	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS		NO LEAD			1.65 V	1.5/3.3	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.12,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-N10	SEPARATE OUTPUT	1	4.3 V	1 mm		3 mm	Not Qualified		90 dB	1.4 V				e4	BREAK-BEFORE-MAKE	30	260	130 ns	1.7 ohm	90 ns	.15 ohm	3 mm
ADG786WBCPZ-REEL7	Analog Devices	SPDT	INDUSTRIAL	20	HVQCCN	SQUARE	YES	UNSPECIFIED		3	1	CMOS		NO LEAD	-2.75 V	-2.5 V	2.5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N20		3	2.75 V	1 mm		4 mm			72 dB	2.25 V	5 VOLT NOMINAL VOLTAGE ALSO AVAILABLE		-2.25 V	e3		30	260	35 ns	4.5 ohm	16 ns	.1 ohm	4 mm
ADG2128WBCPZ-REEL7	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	32	HVQCCN	SQUARE	YES	UNSPECIFIED		1	12	CMOS		NO LEAD	-5.5 V	-5 V	5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N32		3	5.5 V	.8 mm		5 mm				4.5 V	ALSO HAS 12V SINGLE SUPPLY		-4.5 V	e3		30	260		75 ohm		4.5 ohm	5 mm
ADN4600ACPZ-R7	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	64	HVQCCN	SQUARE	YES	UNSPECIFIED		1	8			NO LEAD			1.8 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N64		3	3.6 V	1 mm		9 mm				1.7 V				e3		30	260					9 mm
TPS2065CDGN-2	Texas Instruments	SPST	INDUSTRIAL		HTSSOP	SQUARE	YES	PLASTIC/EPOXY	.0002 mA					GULL WING					SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH			.65 mm	125 Cel	-40 Cel	NICKEL PALLADIUM GOLD SILVER	DUAL	S-PDSO-G8	COMMON OUTPUT	2		1.1 mm		3 mm						0 V		e4	MAKE-BEFORE-BREAK	30	260					3 mm	5.5 V
DS90CP02SPX/NOPB	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	28	QCCN	SQUARE	YES	PLASTIC/EPOXY		1		CMOS		NO LEAD			3.3 V	3.3	CHIP CARRIER	LCC28,.2SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-N28	SEPARATE OUTPUT	3					Not Qualified							e3	BREAK-BEFORE-MAKE	30	260	150 ns
PCA9548ABSHP	NXP Semiconductors	SINGLE-ENDED MULTIPLEXER		24	HVQCCN	SQUARE	YES	PLASTIC/EPOXY	.1 mA	1	8			NO LEAD			2.5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20		.5 mm	85 Cel	-40 Cel		QUAD	S-PQCC-N24	SEPARATE OUTPUT	1	5.5 V	1 mm		4 mm				2.3 V							260	.3 ns	55 ohm	.3 ns		4 mm
NB7L72MMNHTBG	Onsemi	CROSS POINT SWITCH	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED		1	2			NO LEAD			2.5 V	2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL GOLD PALLADIUM	QUAD	S-XQCC-N16	SEPARATE OUTPUT	1	2.625 V	1 mm		3 mm	Not Qualified			2.375 V	ALSO OPERATES IN SUPPLY VOLTAGE 3 TO 3.6V WITH 3.3V NOMINAL					30	260					3 mm
ADW54012Z-0REEL7	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	32	HVQCCN	SQUARE	YES	UNSPECIFIED		1	8	CMOS		NO LEAD	-5.5 V	-5 V	5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N32		3	5.5 V	.8 mm		5 mm			66 dB	4.5 V	CAN ALSO OPERATES AT 12 V SUPPLY		-4.5 V	e3			260	215 ns	75 ohm	255 ns	4.5 ohm	5 mm
ADG5421BRMZ	Analog Devices	SPST	AUTOMOTIVE	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING	-22 V	-15 V	15 V	+-9/+-22/9/40	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	22 V	1.1 mm		3 mm	Not Qualified	NO		9 V			-9 V	e3	BREAK-BEFORE-MAKE	30	260	370 ns	15 ohm		.1 ohm	3 mm
ADG5423BRMZ	Analog Devices	SPST	AUTOMOTIVE	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING	-22 V	-15 V	15 V	+-9/+-22/9/40	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	22 V	1.1 mm		3 mm	Not Qualified	NO/NC		9 V			-9 V	e3	BREAK-BEFORE-MAKE	30	260	370 ns	15 ohm		.1 ohm	3 mm
HD3SS213ZQER	Texas Instruments	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL		VFBGA	SQUARE	YES	PLASTIC/EPOXY	5 mA		4			BALL			3.3 V		GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.5 mm	105 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	S-PBGA-B50	COMMON OUTPUT	3		1 mm		5 mm		NO						e1		30	260					5 mm
ADN4612ACPZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	88	HVQCCN	SQUARE	YES	UNSPECIFIED		1	12			NO LEAD			2.5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N88		3	2.75 V	.85 mm		12 mm				2.25 V	ALSO REQUIRED ANALOG REFERENCE VOLTAGE 1.6 TO 2V			e3		30	260					12 mm
ADG528AKP	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	1.5 mA	1	8	CMOS		J BEND	-16.5 V	-15 V	15 V	12/+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J20		1	16.5 V	4.57 mm	.02 A	8.965 mm	Not Qualified		68 dB	10.8 V			-10.8 V	e0	BREAK-BEFORE-MAKE		225	300 ns	450 ohm	300 ns	5 ohm	8.965 mm
MAX306EQI	Maxim Integrated	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	16	CMOS		J BEND	-20 V	-15 V	15 V	12/+-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J28		1	20 V	4.57 mm	.03 A	11.505 mm	Not Qualified		69 dB	4.5 V			-4.5 V	e0	BREAK-BEFORE-MAKE			200 ns	100 ohm	150 ns	1.5 ohm	11.505 mm
ADG506ATE/883B	Analog Devices	SINGLE-ENDED MULTIPLEXER	MILITARY	28	QCCN	SQUARE	YES	CERAMIC, METAL-SEALED COFIRED	1.5 mA	1	16	CMOS	MIL-STD-883 Class B	NO LEAD	-16.5 V	-15 V	15 V	12/15,GND/-12/-15	CHIP CARRIER	LCC28,.45SQ	Multiplexer or Switches	1.27 mm	125 Cel	-55 Cel	GOLD	QUAD	S-CQCC-N28			16.5 V	2.54 mm	.03 A	11.43 mm	Not Qualified		68 dB	10.8 V			-10.8 V	e4	BREAK-BEFORE-MAKE			300 ns	450 ohm	300 ns	22.5 ohm	11.43 mm
AD7592DITE/883B	Analog Devices	SPDT	MILITARY	20	QCCN	SQUARE	YES	CERAMIC, METAL-SEALED COFIRED	1 mA	2	1	CMOS		NO LEAD		-15 V	15 V	+-15	CHIP CARRIER	LCC20,.35SQ	Multiplexer or Switches	1.27 mm	125 Cel	-55 Cel	TIN LEAD	QUAD	S-CQCC-N20	SEPARATE OUTPUT			2.54 mm		8.89 mm	Not Qualified		85 dB		OVERVOLTAGE PROTECTION			e0	BREAK-BEFORE-MAKE			350 ns	90 ohm	350 ns	2 ohm	8.89 mm
AD7590DITE/883B	Analog Devices	SPST	MILITARY	20	QCCN	SQUARE	YES	CERAMIC, METAL-SEALED COFIRED	1 mA	4	1	CMOS		NO LEAD		-15 V	15 V	+-15	CHIP CARRIER	LCC20,.35SQ	Multiplexer or Switches	1.27 mm	125 Cel	-55 Cel	TIN LEAD	QUAD	S-CQCC-N20	SEPARATE OUTPUT			2.54 mm		8.89 mm	Not Qualified	NO	85 dB		OVERVOLTAGE PROTECTION			e0	BREAK-BEFORE-MAKE			250 ns	90 ohm	400 ns	2 ohm	8.89 mm
MAX396EQI	Maxim Integrated	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY	.001 mA	1	16	CMOS		J BEND	-8 V	-5 V	5 V	+-2.7/+-8/2.7/16	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J28		1	8 V	4.57 mm	.03 A	11.505 mm	Not Qualified		75 dB	3 V			-3 V	e0	BREAK-BEFORE-MAKE			250 ns	100 ohm	200 ns	1.8 ohm	11.505 mm
ADG406BP	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	16	BICMOS		J BEND	-16.5 V	-15 V	15 V	12/+-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J28		1	16.5 V	4.57 mm	.02 A	11.505 mm	Not Qualified		75 dB	13.5 V	CAN ALSO OPERATE WITH SINGLE 12V SUPPLY		-13.5 V	e0	BREAK-BEFORE-MAKE	30	225	150 ns	80 ohm	150 ns	4 ohm	11.505 mm
MAX322CUA	Maxim Integrated	SPST	COMMERCIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING	-8 V	-5 V	5 V	+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	70 Cel	0 Cel	TIN LEAD	DUAL	S-PDSO-G8	SEPARATE OUTPUT	1	8 V	1.1 mm		3 mm	Not Qualified	NO/NC	72 dB	2.7 V			-2.7 V	e0	BREAK-BEFORE-MAKE			150 ns	35 ohm	100 ns	.3 ohm	3 mm
MAX321CUA	Maxim Integrated	SPST	COMMERCIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING	-8 V	-5 V	5 V	+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	70 Cel	0 Cel	TIN LEAD	DUAL	S-PDSO-G8	SEPARATE OUTPUT	1	8 V	1.1 mm		3 mm	Not Qualified	NC	72 dB	2.7 V			-2.7 V	e0	BREAK-BEFORE-MAKE			150 ns	35 ohm	100 ns	.3 ohm	3 mm
ADG419BR-REEL	Analog Devices	SPDT	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING	-16.5 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	SOP8,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8		1	16.5 V	1.09 mm		3 mm	Not Qualified		80 dB	13.5 V	ALSO OPERATES WITH 12V NOMINAL SINGLE SUPPLY		-13.5 V	e0	BREAK-BEFORE-MAKE		240	160 ns	35 ohm	160 ns		3 mm
MAX4544CUA	Maxim Integrated	SPDT	COMMERCIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			5 V	3.3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	70 Cel	0 Cel	TIN LEAD	DUAL	S-PDSO-G8		1	12 V	1.1 mm		3 mm	Not Qualified		76 dB	2.7 V				e0	BREAK-BEFORE-MAKE			100 ns	60 ohm	75 ns	.8 ohm	3 mm
MAX4544EUA	Maxim Integrated	SPDT	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			5 V	3.3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8		1	12 V	1.1 mm		3 mm	Not Qualified		76 dB	2.7 V				e0	BREAK-BEFORE-MAKE		245	100 ns	60 ohm	75 ns	.8 ohm	3 mm
MAX4543EUA	Maxim Integrated	SPST	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING			5 V	3.3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	SEPARATE OUTPUT	1	12 V	1.1 mm		3 mm	Not Qualified	NO/NC	76 dB	2.7 V				e0	BREAK-BEFORE-MAKE			100 ns	60 ohm	75 ns	.8 ohm	3 mm
MAX4529EUA	Maxim Integrated	AUDIO/VIDEO SWITCH	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING	-5.5 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8		1	5.5 V	1.1 mm		3 mm	Not Qualified	NC	80 dB	4.5 V	CAN ALSO OPERATE WITH SINGLE 5V SUPPLY		-4.5 V	e0	BREAK-BEFORE-MAKE		245	75 ns	70 ohm	75 ns		3 mm
MAX459CQH	Maxim Integrated	CROSS POINT SWITCH	COMMERCIAL	44	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	8	CMOS		J BEND		-5 V	5 V	+-5	CHIP CARRIER	LDCC44,.7SQ	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	TIN LEAD	QUAD	S-PQCC-J44		2	5.25 V	4.57 mm		16.585 mm	Not Qualified			4.75 V				e0			245					16.585 mm
MAX378MLP	Maxim Integrated	SINGLE-ENDED MULTIPLEXER	MILITARY	20	QCCN	SQUARE	YES	UNSPECIFIED	.7 mA	1	8	CMOS		NO LEAD	-18 V	-15 V	15 V	+-15	CHIP CARRIER	LCC20,.35SQ	Multiplexer or Switches	1.27 mm	125 Cel	-55 Cel	TIN LEAD	QUAD	S-XQCC-N20		1	18 V	2.54 mm	.02 A	8.89 mm	Not Qualified		68 dB	4.5 V			-4.5 V	e0	BREAK-BEFORE-MAKE			750 ns	3000 ohm	500 ns		8.89 mm
ADG507ATE	Analog Devices	DIFFERENTIAL MULTIPLEXER	MILITARY	28	QCCN	SQUARE	YES	CERAMIC, METAL-SEALED COFIRED	1.5 mA	1	8	CMOS		NO LEAD	-16.5 V	-15 V	15 V	12/15,GND/-12/-15	CHIP CARRIER	LCC28,.45SQ	Multiplexer or Switches	1.27 mm	125 Cel	-55 Cel	TIN LEAD	QUAD	S-CQCC-N28			16.5 V	2.54 mm	.02 A	11.43 mm	Not Qualified		68 dB	10.8 V			-10.8 V	e0	BREAK-BEFORE-MAKE			300 ns	450 ohm	300 ns	22.5 ohm	11.43 mm

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.