COMMERCIAL Multiplexers & Switches 588

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Nominal Bandwidth	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Package Style (Meter)	Package Equivalence Code	Terminal Pitch	Maximum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Maximum Signal Current	Width (mm)	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Input Voltage	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length	Maximum Input Voltage
HD3SS3412ARUAR	Texas Instruments	DIFFERENTIAL MULTIPLEXER	COMMERCIAL	42	VQCCN	RECTANGULAR	YES	PLASTIC/EPOXY	6 mA	1	4			NO LEAD			3.3 V	CHIP CARRIER, VERY THIN PROFILE		.5 mm	70 Cel	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N42	SEPARATE OUTPUT	2	4 V	.8 mm		3.5 mm	NO						e4	30	260					9 mm
HV2070/AJA	Microchip Technology	SPST	COMMERCIAL	121	TFBGA	SQUARE	YES	UNSPECIFIED	20 mA		32			BALL	-4.5 V		6 V	GRID ARRAY, THIN PROFILE, FINE PITCH	BGA121,11x11,31	.8 mm	70 Cel		BOTTOM	S-XBGA-B121	SEPARATE OUTPUT		6.3 V	1.2 mm		10 mm	NC	56 dB	4.5 V			-6.3 V		NOT SPECIFIED	NOT SPECIFIED	5000 ns	8 ohm	5000 ns	4.7 ohm	10 mm
TS5USBC410YFFR	Texas Instruments	CROSS POINT SWITCH	COMMERCIAL	12	VFBGA	RECTANGULAR	YES	UNSPECIFIED	.022 mA	1	2		1200 kHz	BALL			3.3 V	GRID ARRAY, VERY THIN PROFILE, FINE PITCH		.4 mm	70 Cel	TIN SILVER COPPER	BOTTOM	R-XBGA-B12		1	5.5 V	.625 mm		1.198 mm		25 dB	2.3 V				e1	30	260	250000 ns	9 ohm	1000 ns	.075 ohm	1.598 mm
TS5USBC412YFFT	Texas Instruments	CROSS POINT SWITCH	COMMERCIAL	12	VFBGA	RECTANGULAR	YES	UNSPECIFIED	.022 mA	1	2		1200 kHz	BALL			3.3 V	GRID ARRAY, VERY THIN PROFILE, FINE PITCH		.4 mm	70 Cel	TIN SILVER COPPER	BOTTOM	R-XBGA-B12		1	5.5 V	.625 mm		1.198 mm		25 dB	2.3 V				e1	30	260	250000 ns	9 ohm	1000 ns	.075 ohm	1.598 mm
HV2701FG-G-M931	Microchip Technology	SINGLE-ENDED MULTIPLEXER	COMMERCIAL	48	LFQFP	SQUARE	YES	PLASTIC/EPOXY	4 mA	1	16	CMOS		GULL WING			5 V	FLATPACK, LOW PROFILE, FINE PITCH	BGA42,8X8,24	.5 mm	70 Cel	MATTE TIN	QUAD	S-PQFP-G48		3	5.5 V	1.6 mm		7 mm	NO	33 dB	3 V		-30 V		e3		260	5000 ns	38 ohm	5000 ns	1.9 ohm	7 mm	30 V
HV2201PJ-G-M904	Microchip Technology	SPST	COMMERCIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY	3 mA	8	8	CMOS		J BEND			5 V	CHIP CARRIER	LDCC28,.5SQ	1.27 mm	70 Cel	MATTE TIN	QUAD	S-PQCC-J28	SEPARATE OUTPUT		5.5 V	4.573 mm	3 A	11.43 mm	NO	33 dB	3 V	IT ALSO REQUIRES VPP (40V TO VNN +200V) AND VNN (-40V TO -160V) SUPPLY	-30 V		e3			5000 ns	38 ohm	5000 ns	1.9 ohm	11.43 mm	30 V
HV2605BD-M936	Microchip Technology	SINGLE-ENDED MULTIPLEXER	COMMERCIAL	42	TFBGA	RECTANGULAR	YES	PLASTIC/EPOXY	4 mA	1	16			BALL			5 V	GRID ARRAY, THIN PROFILE, FINE PITCH	BGA42,8X8,24	.68 mm	70 Cel		BOTTOM	R-PBGA-B42			5.5 V	1.02 mm		5.29 mm	NO	33 dB	3 V		-30 V					5000 ns	38 ohm	5000 ns	1.9 ohm	5.3 mm	30 V
HV2721/R4X	Microchip Technology	SPST	COMMERCIAL	64	HVQCCN	SQUARE	YES	PLASTIC/EPOXY	4 mA	16	16	HVCMOS		NO LEAD		-150 V	5 V	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC64,.35SQ,20	.5 mm	70 Cel		QUAD	S-PQCC-N64			5.5 V	1 mm	3 A	9 mm	NO	55 dB	3 V		15 V	-240 V				6000 ns	48 ohm	6000 ns	9.6 ohm	9 mm	245 V
TUSB1146IRNQR	Texas Instruments	CROSS POINT SWITCH	COMMERCIAL	40	HVQCCN	RECTANGULAR	YES	PLASTIC/EPOXY		1	5			NO LEAD			3.3 V	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.17X.25,16	.4 mm	70 Cel	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N40	COMMON OUTPUT	1	3.6 V	.8 mm		4 mm			3 V				e4	30	260	500 ns	10 ohm	500 ns	2.5 ohm	6 mm
TUSB1146IRNQT	Texas Instruments	CROSS POINT SWITCH	COMMERCIAL	40	HVQCCN	RECTANGULAR	YES	PLASTIC/EPOXY		1	5			NO LEAD			3.3 V	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.17X.25,16	.4 mm	70 Cel	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N40	COMMON OUTPUT	1	3.6 V	.8 mm		4 mm			3 V				e4	30	260	500 ns	10 ohm	500 ns	2.5 ohm	6 mm
TUSB1146RNQR	Texas Instruments	CROSS POINT SWITCH	COMMERCIAL	40	HVQCCN	RECTANGULAR	YES	PLASTIC/EPOXY		1	5			NO LEAD			3.3 V	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.17X.25,16	.4 mm	70 Cel	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N40	COMMON OUTPUT	1	3.6 V	.8 mm		4 mm			3 V				e4	30	260	500 ns	10 ohm	500 ns	2.5 ohm	6 mm
TMUXHS4412RUAT	Texas Instruments	SINGLE-ENDED MULTIPLEXER	COMMERCIAL	42	HVQCCN	RECTANGULAR	YES	PLASTIC/EPOXY	.48 mA	4	4			NO LEAD			1.8 V	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC42,.14X.35,20	.5 mm	70 Cel	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N42	SEPARATE OUTPUT	2	4 V	.8 mm		3.5 mm		12 dB	1.71 V				e4	30	260	130 ns	8 ohm	100 ns		9 mm

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.