NXP Semiconductors Multiplexers & Switches 102

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Screening Level	Terminal Form	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length
TDA19997HL/C1,518	NXP Semiconductors		COMMERCIAL	100	QFP	SQUARE	YES	PLASTIC/EPOXY				CMOS		GULL WING		1.8,3.3	FLATPACK	QFP100,.63SQ,20	Multiplexer or Switches	.5 mm	70 Cel	0 Cel		QUAD	S-PQFP-G100						Not Qualified
TDA19997HL/C1,551	NXP Semiconductors		COMMERCIAL	100	QFP	SQUARE	YES	PLASTIC/EPOXY				CMOS		GULL WING		1.8,3.3	FLATPACK	QFP100,.63SQ,20	Multiplexer or Switches	.5 mm	70 Cel	0 Cel		QUAD	S-PQFP-G100						Not Qualified
TDA19997HL/C1,557	NXP Semiconductors		COMMERCIAL	100	QFP	SQUARE	YES	PLASTIC/EPOXY				CMOS		GULL WING		1.8,3.3	FLATPACK	QFP100,.63SQ,20	Multiplexer or Switches	.5 mm	70 Cel	0 Cel		QUAD	S-PQFP-G100						Not Qualified
CBTL06121AHF,518	NXP Semiconductors	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	56	QCCN	RECTANGULAR	YES	PLASTIC/EPOXY	1 mA	6	2			NO LEAD	3.3 V	3.3	CHIP CARRIER	LCC56,.19X.43,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel		QUAD	R-PQCC-N56						Not Qualified
CBTL06121BHF,518	NXP Semiconductors	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	56	QCCN	RECTANGULAR	YES	PLASTIC/EPOXY	1 mA	6	2			NO LEAD	3.3 V	3.3	CHIP CARRIER	LCC56,.19X.43,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel		QUAD	R-PQCC-N56						Not Qualified
NX3L2467HR,115	NXP Semiconductors	DPDT	AUTOMOTIVE	16	QCCN	SQUARE	YES	PLASTIC/EPOXY		2		CMOS		NO LEAD		1.5/3.3	CHIP CARRIER	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N16	SEPARATE OUTPUT	1				Not Qualified				e4	BREAK-BEFORE-MAKE	30	260	90 ns	4.1 ohm
NX3L4357GM,132	NXP Semiconductors	SP3T	AUTOMOTIVE	10	QCCN	RECTANGULAR	YES	PLASTIC/EPOXY		1		CMOS		NO LEAD		1.4/4.3	CHIP CARRIER	LCC10,.06X.08,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N10	SEPARATE OUTPUT	1				Not Qualified				e4	BREAK-BEFORE-MAKE	30	260	125 ns	4.1 ohm
PCA9646D,118	NXP Semiconductors	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	1	4	CMOS		GULL WING			SMALL OUTLINE	SOP16,.25		1.27 mm	85 Cel	-40 Cel		DUAL	R-PDSO-G16	COMMON OUTPUT	1	5.5 V	1.75 mm	3.9 mm		NO		2.7 V			30	260					9.9 mm
NX5DV713EHF,118	NXP Semiconductors	SPDT	INDUSTRIAL	32	QCCN	RECTANGULAR	YES	PLASTIC/EPOXY		3				NO LEAD		3.3,5	CHIP CARRIER	LCC32,.12X.24,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel		QUAD	R-PQCC-N32	SEPARATE OUTPUT	1				Not Qualified					BREAK-BEFORE-MAKE	30	260
NX3L2267GM-Q100X	NXP Semiconductors	SPDT	AUTOMOTIVE	10	QCCN	RECTANGULAR	YES	PLASTIC/EPOXY		2		CMOS	AEC-Q100	NO LEAD		1.4/4.3	CHIP CARRIER	LCC10,.06X.08,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel		QUAD	R-PQCC-N10	SEPARATE OUTPUT					Not Qualified					BREAK-BEFORE-MAKE			90 ns	4.1 ohm
NX3L2267GU-Q100X	NXP Semiconductors	SPDT	AUTOMOTIVE	10	QCCN	RECTANGULAR	YES	PLASTIC/EPOXY		2		CMOS	AEC-Q100	NO LEAD		1.4/4.3	CHIP CARRIER	LCC10,.06X.07,16	Multiplexer or Switches	.4 mm	125 Cel	-40 Cel		QUAD	R-PQCC-N10	SEPARATE OUTPUT					Not Qualified					BREAK-BEFORE-MAKE			90 ns	4.1 ohm
NX3L4051HR-Q100X	NXP Semiconductors	SINGLE-ENDED MULTIPLEXER	AUTOMOTIVE	16	QCCN	SQUARE	YES	PLASTIC/EPOXY	.006 mA	1	8	CMOS	AEC-Q100	NO LEAD		1.4/4.3	CHIP CARRIER	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel		QUAD	S-PQCC-N16		1				Not Qualified					BREAK-BEFORE-MAKE		260	100 ns	4.1 ohm
NX3L4053HR-Q100X	NXP Semiconductors	SPDT	AUTOMOTIVE	16	QCCN	SQUARE	YES	PLASTIC/EPOXY		3		CMOS	AEC-Q100	NO LEAD		1.4/4.3	CHIP CARRIER	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel		QUAD	S-PQCC-N16	SEPARATE OUTPUT	1				Not Qualified					BREAK-BEFORE-MAKE		260	90 ns	4.2 ohm
NX3L4053PW-Q100J	NXP Semiconductors	SPDT	AUTOMOTIVE	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		3		CMOS	AEC-Q100	GULL WING		1.4/4.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.635 mm	125 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1				Not Qualified				e4	BREAK-BEFORE-MAKE	30	260	90 ns	4.2 ohm
NX3L1G66GW-Q100H	NXP Semiconductors	SPST	AUTOMOTIVE	5	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1		CMOS	AEC-Q100	GULL WING		1.4/4.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	Multiplexer or Switches	.635 mm	125 Cel	-40 Cel		DUAL	R-PDSO-G5		1				Not Qualified	NO				BREAK-BEFORE-MAKE		260	41 ns	4.1 ohm
CBTL06141EE/G,118	NXP Semiconductors		OTHER	48	FBGA	SQUARE	YES	PLASTIC/EPOXY	1 mA	3	4			BALL	3.3 V	3.3	GRID ARRAY, FINE PITCH	BGA48,9X9,20	Multiplexer or Switches	.5 mm	85 Cel	-10 Cel		BOTTOM	S-PBGA-B48		1				Not Qualified							260
NX3DV3899HR,115	NXP Semiconductors	DPDT	AUTOMOTIVE	16	QCCN	SQUARE	YES	PLASTIC/EPOXY		2				NO LEAD		1.4/4.3	CHIP CARRIER	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	Matte Tin (Sn)	QUAD	S-PQCC-N16	SEPARATE OUTPUT	1				Not Qualified				e3	BREAK-BEFORE-MAKE	30	260	90 ns	10 ohm
NX3L1G66GW,125	NXP Semiconductors		AUTOMOTIVE	5	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING	1.65 V	1.5/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	TIN	DUAL	R-PDSO-G5		1	4.3 V	1.1 mm	1.25 mm	Not Qualified	NO	90 dB	1.4 V	e3		30	260	48 ns	1.7 ohm	21 ns		2.05 mm
NX3L1T384GM,115	NXP Semiconductors		AUTOMOTIVE	6	SON	RECTANGULAR	YES	PLASTIC/EPOXY		1		CMOS		NO LEAD		1.4/4.3	SMALL OUTLINE	SOLCC6,.04,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	Tin (Sn)	DUAL	R-PDSO-N6		1				Not Qualified				e3	BREAK-BEFORE-MAKE	30	260	90 ns	4.1 ohm
NX3L1T66GM,115	NXP Semiconductors		AUTOMOTIVE	6	SON	RECTANGULAR	YES	PLASTIC/EPOXY		1				NO LEAD		1.4/4.3	SMALL OUTLINE	SOLCC6,.04,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	TIN	DUAL	R-PDSO-N6		1				Not Qualified	NO			e3		30	260		4.1 ohm
NX3L2267GM,132	NXP Semiconductors		AUTOMOTIVE	10	QCCN	RECTANGULAR	YES	PLASTIC/EPOXY		2		CMOS		NO LEAD		1.4/4.3	CHIP CARRIER	LCC10,.06X.08,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	R-PQCC-N10	SEPARATE OUTPUT	1				Not Qualified				e3	BREAK-BEFORE-MAKE			90 ns	4.1 ohm
NX3L2G384GD,125	NXP Semiconductors		AUTOMOTIVE	8	SON	RECTANGULAR	YES	PLASTIC/EPOXY		2		CMOS		NO LEAD		1.5/3.3	SMALL OUTLINE	SOLCC8,.12,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-N8	SEPARATE OUTPUT	1				Not Qualified	NC			e4		30	260	41 ns	4.1 ohm
NX3L2G384GT,115	NXP Semiconductors		AUTOMOTIVE	8	SON	RECTANGULAR	YES	PLASTIC/EPOXY		2		CMOS		NO LEAD		1.5/3.3	SMALL OUTLINE	SOLCC8,.04,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-N8	SEPARATE OUTPUT	1				Not Qualified	NC			e4		30	260	41 ns	4.1 ohm
NX3L2G66GD,125	NXP Semiconductors		AUTOMOTIVE	8	SON	RECTANGULAR	YES	PLASTIC/EPOXY		2		CMOS		NO LEAD		1.5/3.3	SMALL OUTLINE	SOLCC8,.12,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-N8	SEPARATE OUTPUT	1				Not Qualified	NO			e4	BREAK-BEFORE-MAKE	30	260	41 ns	4.1 ohm
NX3L2T384GD,125	NXP Semiconductors	SPDT	AUTOMOTIVE	8	VSON	RECTANGULAR	YES	PLASTIC/EPOXY		2	1	CMOS		NO LEAD	1.65 V	1.4/4.3	SMALL OUTLINE, VERY THIN PROFILE	SOLCC8,.12,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-N8		1	4.3 V	.5 mm	2 mm	Not Qualified	NO	90 dB	1.4 V	e4		30	260	120 ns	1.7 ohm	60 ns	.04 ohm	3 mm
NX3L2T384GM,125	NXP Semiconductors	SPDT	AUTOMOTIVE	8	VQCCN	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS		NO LEAD	1.65 V	1.4/4.3	CHIP CARRIER, VERY THIN PROFILE	LCC8,.06SQ,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N8		1	4.3 V	.5 mm	1.6 mm	Not Qualified	NO	90 dB	1.4 V	e4		30	260	120 ns	1.7 ohm	60 ns	.04 ohm	1.6 mm
NX3L2T384GT,115	NXP Semiconductors	SPDT	AUTOMOTIVE	8	VSON	RECTANGULAR	YES	PLASTIC/EPOXY		2	1	CMOS		NO LEAD	1.65 V	1.4/4.3	SMALL OUTLINE, VERY THIN PROFILE	SOLCC8,.04,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-N8		1	4.3 V	.5 mm	1 mm	Not Qualified	NO	90 dB	1.4 V	e4		30	260	120 ns	1.7 ohm	60 ns	.04 ohm	1.95 mm
NX3L4053HR,115	NXP Semiconductors	SPDT	AUTOMOTIVE	16	QCCN	SQUARE	YES	PLASTIC/EPOXY		3		CMOS		NO LEAD		1.4/4.3	CHIP CARRIER	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	Matte Tin (Sn)	QUAD	S-PQCC-N16	SEPARATE OUTPUT	1				Not Qualified				e3	BREAK-BEFORE-MAKE	30	260	90 ns	4.2 ohm
NX3L4684TK,132	NXP Semiconductors		AUTOMOTIVE	10	HVSON	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS		NO LEAD	1.65 V	1.5/3.3	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.12,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-N10	SEPARATE OUTPUT	1	4.3 V	1 mm	3 mm	Not Qualified		90 dB	1.4 V	e4	BREAK-BEFORE-MAKE	30	260	130 ns	1.7 ohm	90 ns	.15 ohm	3 mm
NX3V1G384GM,115	NXP Semiconductors		AUTOMOTIVE	6	SON	RECTANGULAR	YES	PLASTIC/EPOXY		1		CMOS		NO LEAD		1.5/3.3	SMALL OUTLINE	SOLCC6,.04,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	TIN	DUAL	R-PDSO-N6		1				Not Qualified	NC			e3		30	260		2.1 ohm
NX3V1G384GM,132	NXP Semiconductors		AUTOMOTIVE	6	SON	RECTANGULAR	YES	PLASTIC/EPOXY		1		CMOS		NO LEAD		1.5/3.3	SMALL OUTLINE	SOLCC6,.04,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	TIN	DUAL	R-PDSO-N6		1				Not Qualified	NC			e3		30	260		2.1 ohm
NX3V1G384GW,125	NXP Semiconductors		AUTOMOTIVE	5	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1		CMOS		GULL WING		1.5/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	Multiplexer or Switches	.635 mm	125 Cel	-40 Cel	TIN	DUAL	R-PDSO-G5		1				Not Qualified	NC			e3	BREAK-BEFORE-MAKE	30	260	43 ns	2.1 ohm
NX3V1T384GM,115	NXP Semiconductors		AUTOMOTIVE	6	SON	RECTANGULAR	YES	PLASTIC/EPOXY		1		CMOS		NO LEAD		1.4/4.3	SMALL OUTLINE	SOLCC6,.04,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	TIN	DUAL	R-PDSO-N6		1				Not Qualified	NC			e3		30	260		2.1 ohm
NX3V1T66GW,125	NXP Semiconductors		AUTOMOTIVE	5	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1		CMOS		GULL WING		1.5/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	Multiplexer or Switches	.635 mm	125 Cel	-40 Cel	TIN	DUAL	R-PDSO-G5		1				Not Qualified	NO			e3		30	260	49 ns	2.1 ohm
NX5DV715HF,118	NXP Semiconductors		INDUSTRIAL	32	QCCN	RECTANGULAR	YES	PLASTIC/EPOXY		3				NO LEAD		3.3,5	CHIP CARRIER	LCC32,.12X.24,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	R-PQCC-N32	SEPARATE OUTPUT	1				Not Qualified				e3	BREAK-BEFORE-MAKE	30	260
PCA9548ABSHP	NXP Semiconductors	SINGLE-ENDED MULTIPLEXER		24	HVQCCN	SQUARE	YES	PLASTIC/EPOXY	.1 mA	1	8			NO LEAD	2.5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20		.5 mm	85 Cel	-40 Cel		QUAD	S-PQCC-N24	SEPARATE OUTPUT	1	5.5 V	1 mm	4 mm				2.3 V				260	.3 ns	55 ohm	.3 ns		4 mm
74AHC1G66GW,165	NXP Semiconductors	SPST	AUTOMOTIVE	5	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING	5 V	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	Tin (Sn)	DUAL	R-PDSO-G5		1	5.5 V	1.1 mm	1.25 mm	Not Qualified	NO	50 dB	2 V	e3	MAKE-BEFORE-BREAK	30	260	25 ns	50 ohm	15 ns		2 mm
74AHCT1G66GW,165	NXP Semiconductors	SPST	AUTOMOTIVE	5	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING	5 V	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	Tin (Sn)	DUAL	R-PDSO-G5		1	5.5 V	1.1 mm	1.25 mm	Not Qualified	NO	50 dB	4.5 V	e3	MAKE-BEFORE-BREAK	30	260	17 ns	30 ohm	17 ns		2 mm
74HCT4067BQ,115	NXP Semiconductors	SINGLE-ENDED MULTIPLEXER	AUTOMOTIVE	24	HVQCCN	RECTANGULAR	YES	PLASTIC/EPOXY	.294 mA	1	16	CMOS		NO LEAD	4.5 V	5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24/28,.14X.2,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	R-PQCC-N24		1	5.5 V	1 mm	3.5 mm	Not Qualified		50 dB	4.5 V	e4	BREAK-BEFORE-MAKE	30	260	90 ns	180 ohm	83 ns	9 ohm	5.5 mm
CBT3251DS,118	NXP Semiconductors	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	8			GULL WING	5 V		SMALL OUTLINE, SHRINK PITCH			.635 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16		1	5.5 V	1.73 mm	3.9 mm	Not Qualified			4.5 V	e4		30	260	5.8 ns	20 ohm	6.4 ns		4.9 mm
NX3L1G3157GM,115	NXP Semiconductors	SPDT	AUTOMOTIVE	6	VSON	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		NO LEAD	1.65 V	1.6/3.3	SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.04,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	Tin (Sn)	DUAL	R-PDSO-N6		1	4.3 V	.5 mm	1 mm	Not Qualified		90 dB	1.4 V	e3	BREAK-BEFORE-MAKE	30	260	52 ns	1.7 ohm	30 ns	.2 ohm	1.45 mm
NX3L1G3157GM,132	NXP Semiconductors	SPDT	AUTOMOTIVE	6	VSON	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		NO LEAD	1.65 V	1.6/3.3	SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.04,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	Tin (Sn)	DUAL	R-PDSO-N6		1	4.3 V	.5 mm	1 mm	Not Qualified		90 dB	1.4 V	e3	BREAK-BEFORE-MAKE	30	260	52 ns	1.7 ohm	30 ns	.2 ohm	1.45 mm
NX3L1G384GM,132	NXP Semiconductors	SPST	AUTOMOTIVE	6	VSON	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		NO LEAD	1.65 V	1.5/3.3	SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.04,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	Tin (Sn)	DUAL	R-PDSO-N6		1	4.3 V	.5 mm	1 mm	Not Qualified	NO	90 dB	1.4 V	e3	BREAK-BEFORE-MAKE	30	260	48 ns	1.7 ohm	21 ns		1.45 mm
NX3L1G66GM,115	NXP Semiconductors	SPST	AUTOMOTIVE	6	VSON	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		NO LEAD	1.65 V	1.5/3.3	SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.04,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	Tin (Sn)	DUAL	R-PDSO-N6	SEPARATE OUTPUT	1	4.3 V	.5 mm	1 mm	Not Qualified	NO	90 dB	1.4 V	e3	BREAK-BEFORE-MAKE	30	260	48 ns	1.7 ohm	21 ns		1.45 mm
NX3L1G66GM,132	NXP Semiconductors	SPST	AUTOMOTIVE	6	VSON	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		NO LEAD	1.65 V	1.5/3.3	SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.04,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	Tin (Sn)	DUAL	R-PDSO-N6	SEPARATE OUTPUT	1	4.3 V	.5 mm	1 mm	Not Qualified	NO	90 dB	1.4 V	e3	BREAK-BEFORE-MAKE	30	260	48 ns	1.7 ohm	21 ns		1.45 mm
NX3L1T3157GM,115	NXP Semiconductors	SPDT	AUTOMOTIVE	6	VSON	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		NO LEAD	1.65 V	1.5/3.3	SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.04,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	TIN	DUAL	R-PDSO-N6	SEPARATE OUTPUT	1	4.3 V	.5 mm	1 mm	Not Qualified		90 dB	1.4 V	e3	BREAK-BEFORE-MAKE	30	260	120 ns	1.7 ohm	90 ns	.04 ohm	1.45 mm
NX3L1T3157GM,132	NXP Semiconductors	SPDT	AUTOMOTIVE	6	VSON	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		NO LEAD	1.65 V	1.5/3.3	SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.04,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	Tin (Sn)	DUAL	R-PDSO-N6	SEPARATE OUTPUT	1	4.3 V	.5 mm	1 mm	Not Qualified		90 dB	1.4 V	e3	BREAK-BEFORE-MAKE	30	260	120 ns	1.7 ohm	90 ns	.04 ohm	1.45 mm
NX3L1T3157GW,125	NXP Semiconductors	SPDT	AUTOMOTIVE	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING	1.65 V	1.5/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	Tin (Sn)	DUAL	R-PDSO-G6		1	4.3 V	1.1 mm	1.25 mm	Not Qualified		90 dB	1.4 V	e3	BREAK-BEFORE-MAKE	30	260	120 ns	1.7 ohm	90 ns	.04 ohm	2 mm

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.