Multiplexers & Switches

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Nominal Bandwidth	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Maximum Signal Current	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Input Voltage	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length	Maximum Input Voltage
ADG1313YRZ-REEL7	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-16.5 V	-15 V	15 V	12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	105 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	16.5 V	1.75 mm		3.9 mm	Not Qualified		80 dB	13.5 V			-13.5 V	e3	BREAK-BEFORE-MAKE	30	260	180 ns	200 ohm	60 ns	5 ohm	9.9 mm
ADG1313YRZ	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-16.5 V	-15 V	15 V	12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	105 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	16.5 V	1.75 mm		3.9 mm	Not Qualified		80 dB	13.5 V			-13.5 V	e3	BREAK-BEFORE-MAKE	30	260	180 ns	200 ohm	60 ns	5 ohm	9.9 mm
NB6L72MMNG	Onsemi	CROSS POINT SWITCH	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED		1	2			NO LEAD			2.5 V	2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL GOLD PALLADIUM	QUAD	S-XQCC-N16		1	3.63 V	1 mm		3 mm	Not Qualified			2.375 V	ALSO OPERATES WITH 0V -3.63V SUPPLY					30	260	.48 ns		.48 ns		3 mm
NB6L72MNG	Onsemi	CROSS POINT SWITCH	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED		1	2			NO LEAD			2.5 V	2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL GOLD PALLADIUM	QUAD	S-XQCC-N16		1	3.63 V	1 mm		3 mm	Not Qualified			2.375 V	NECL MODE: 0V GND WITH VEE = -2.375V TO -3.63V; IT ALSO WORKS ON 3.3 V SUPPLY					30	260	.16 ns		.16 ns		3 mm
OPA875IDG4	Texas Instruments	VIDEO MULTIPLEXER	INDUSTRIAL	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	12 mA	1	2	BIPOLAR		GULL WING	-6 V	-5 V	5 V	5	SMALL OUTLINE	SOP8,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8		2	5 V	1.75 mm		3.9 mm	Not Qualified	NO/NC	70 dB	5 V			-3 V	e4		30	260					4.9 mm
OPA875IDGKTG4	Texas Instruments	VIDEO MULTIPLEXER	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY	12 mA	1	2	BIPOLAR		GULL WING	-6 V	-5 V	5 V	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD SILVER	DUAL	S-PDSO-G8		2	5 V	1.1 mm		3 mm	Not Qualified	NO/NC	70 dB	5 V			-3 V	e4		30	260					3 mm
AD8117ABPZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	304	BGA	SQUARE	YES	PLASTIC/EPOXY		1	32	BIPOLAR		BALL		-2.5 V	2.5 V	+-2.5	GRID ARRAY	BGA304,23X23,50	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	S-PBGA-B304	SEPARATE OUTPUT	3		1.765 mm		31 mm	Not Qualified		90 dB		CAN ALSO OPERATE WITH 5V SINGLE SUPPLY			e1			260					31 mm
AD8118ABPZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	304	BGA	SQUARE	YES	PLASTIC/EPOXY		1	32	BIPOLAR		BALL		-2.5 V	2.5 V	+-2.5	GRID ARRAY	BGA304,23X23,50	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	S-PBGA-B304	SEPARATE OUTPUT	3		1.765 mm		31 mm	Not Qualified		90 dB		CAN ALSO OPERATE WITH 5V SINGLE SUPPLY			e1			260					31 mm
ADG701LBRJ-500RL7	Analog Devices	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G5	SEPARATE OUTPUT	1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NC	55 dB	1.8 V				e0	BREAK-BEFORE-MAKE		240	20 ns	5 ohm	13 ns	1.5 ohm	2.9 mm
ADG701LBRJ-REEL7	Analog Devices	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G5	SEPARATE OUTPUT	1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NC	55 dB	1.8 V				e0	BREAK-BEFORE-MAKE		240	20 ns	5 ohm	13 ns	1.5 ohm	2.9 mm
ADG701LBRJ-REEL	Analog Devices	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G5	SEPARATE OUTPUT	1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NC	55 dB	1.8 V				e0	BREAK-BEFORE-MAKE		240	20 ns	5 ohm	13 ns	1.5 ohm	2.9 mm
ADG701LBRJZ-REEL	Analog Devices	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G5	SEPARATE OUTPUT	1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NC	55 dB	1.8 V				e3	BREAK-BEFORE-MAKE		260	20 ns	5 ohm	13 ns	1.5 ohm	2.9 mm
ADG701LBRM-REEL7	Analog Devices	SPST	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NC	55 dB	1.8 V				e0	BREAK-BEFORE-MAKE		240	20 ns	5 ohm	13 ns	1.5 ohm	3 mm
ADG701LBRM-REEL	Analog Devices	SPST	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NC	55 dB	1.8 V				e0	BREAK-BEFORE-MAKE		240	20 ns	5 ohm	13 ns	1.5 ohm	3 mm
ADG701LBRMZ-REEL	Analog Devices	SPST	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G8	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NC	55 dB	1.8 V				e3	BREAK-BEFORE-MAKE		260	20 ns	5 ohm	13 ns	1.5 ohm	3 mm
ADG701LBRMZ	Analog Devices	SPST	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G8	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NC	55 dB	1.8 V				e3	BREAK-BEFORE-MAKE	30	260	20 ns	5 ohm	13 ns	1.5 ohm	3 mm
ADG701LBRM	Analog Devices	SPST	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NC	55 dB	1.8 V				e0	BREAK-BEFORE-MAKE		240	20 ns	5 ohm	13 ns	1.5 ohm	3 mm
ADG701LBRT-REEL7	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NC	55 dB	1.8 V				e0	BREAK-BEFORE-MAKE		240	20 ns	5 ohm	13 ns	1.5 ohm	2.9 mm
ADG701LBRT-REEL	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NC	55 dB	1.8 V				e0	BREAK-BEFORE-MAKE		240	20 ns	5 ohm	13 ns	1.5 ohm	2.9 mm
ADG701LBRTZ-REEL	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NC	55 dB	1.8 V				e3	BREAK-BEFORE-MAKE		260	20 ns	5 ohm	13 ns	1.5 ohm	2.9 mm
ADG702LBRJ-REEL7	Analog Devices	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G5	SEPARATE OUTPUT	1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NO	55 dB	1.8 V				e0	BREAK-BEFORE-MAKE		240	20 ns	5 ohm	13 ns	1.5 ohm	2.9 mm
ADG702LBRJZ-500RL7	Analog Devices	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G5	SEPARATE OUTPUT	1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NO	55 dB	1.8 V				e3	BREAK-BEFORE-MAKE		260	20 ns	5 ohm	13 ns	1.5 ohm	2.9 mm
ADG702LBRJZ-REEL7	Analog Devices	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G5	SEPARATE OUTPUT	1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NO	55 dB	1.8 V				e3	BREAK-BEFORE-MAKE		260	20 ns	5 ohm	13 ns	1.5 ohm	2.9 mm
ADG702LBRM-REEL	Analog Devices	SPST	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NO	55 dB	1.8 V				e0	BREAK-BEFORE-MAKE		240	20 ns	5 ohm	13 ns	1.5 ohm	3 mm
ADG702LBRMZ-REEL7	Analog Devices	SPST	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G8	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NO	55 dB	1.8 V				e3	BREAK-BEFORE-MAKE		260	20 ns	5 ohm	13 ns	1.5 ohm	3 mm
ADG702LBRMZ-REEL	Analog Devices	SPST	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G8	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NO	55 dB	1.8 V				e3	BREAK-BEFORE-MAKE		260	20 ns	5 ohm	13 ns	1.5 ohm	3 mm
ADG702LBRMZ	Analog Devices	SPST	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G8	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NO	55 dB	1.8 V				e3	BREAK-BEFORE-MAKE	30	260	20 ns	5 ohm	13 ns	1.5 ohm	3 mm
ADG702LBRT-REEL7	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NO	55 dB	1.8 V				e0	BREAK-BEFORE-MAKE		240	20 ns	5 ohm	13 ns	1.5 ohm	2.9 mm
ADG702LBRT-REEL	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NO	55 dB	1.8 V				e0	BREAK-BEFORE-MAKE		240	20 ns	5 ohm	13 ns	1.5 ohm	2.9 mm
ADG702LBRTZ-REEL	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NO	55 dB	1.8 V				e3	BREAK-BEFORE-MAKE		260	20 ns	5 ohm	13 ns	1.5 ohm	2.9 mm
ADG799ABCPZ-REEL	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	24	VQCCN	SQUARE	YES	UNSPECIFIED		1	3	CMOS		NO LEAD			3 V	3/5	CHIP CARRIER, VERY THIN PROFILE	LCC24,.16SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N24	SEPARATE OUTPUT	3	3.3 V	1 mm		4 mm	Not Qualified		60 dB	2.7 V	ALSO OPERATE AT 5V SUPPLY			e3	BREAK-BEFORE-MAKE		260	266 ns	5.5 ohm	260 ns	1.85 ohm	4 mm
ADG799GBCPZ-REEL	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	24	VQCCN	SQUARE	YES	UNSPECIFIED		1	3	CMOS		NO LEAD			3 V	3/5	CHIP CARRIER, VERY THIN PROFILE	LCC24,.16SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N24	SEPARATE OUTPUT	3	3.3 V	1 mm		4 mm	Not Qualified		60 dB	2.7 V	ALSO OPERATE AT 5V SUPPLY			e3	BREAK-BEFORE-MAKE		260	266 ns	5.5 ohm	260 ns	1.85 ohm	4 mm
ADG620BRTZ-REEL7	Analog Devices	SPDT	INDUSTRIAL	8	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	1	1	CMOS		GULL WING	-5.5 V	-5 V	5 V	+-3/+-5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSSOP8,.1	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	COMMON OUTPUT	1	5.5 V	1.45 mm	.05 A	1.6 mm	Not Qualified	NO	67 dB	2.7 V	ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY		-2.7 V	e4	MAKE-BEFORE-BREAK		260	65 ns	6.5 ohm	330 ns	.7 ohm	2.9 mm
SN74AUC2G53DCURG4	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	8	VSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	1	1	CMOS	500 kHz	GULL WING			1.1 V	1.2/2.5	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	SEPARATE OUTPUT	1	2.7 V	.9 mm	.1 A	2 mm	Not Qualified		59 dB	.8 V	BUILT-IN SPDT SWITCH	0 V		e4	MAKE-BEFORE-BREAK	NOT SPECIFIED	260	3.6 ns	40 ohm	3.6 ns	4 ohm	2.3 mm	3.6 V
TS5A23160DGSRG4	Texas Instruments	SPDT	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.001 mA	2	1		100 kHz	GULL WING			1.8 V	1.8/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NO/NC	64 dB	1.65 V		0 V		e4	MAKE-BEFORE-BREAK	30	260	14.5 ns	2.5 ohm	21.5 ns	.15 ohm	3 mm	5.5 V
TS5A23160DGSTG4	Texas Instruments	SPDT	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.001 mA	2	2		100 kHz	GULL WING			1.8 V	1.8/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NO/NC	64 dB	1.65 V		0 V		e4	MAKE-BEFORE-BREAK	30	260	14.5 ns	3.5 ohm	21.5 ns	.15 ohm	3 mm	5.5 V
MAX4760ETX-T	Maxim Integrated	DPDT	INDUSTRIAL	36	HVQCCN	SQUARE	YES	UNSPECIFIED		4	2	CMOS		NO LEAD			3 V	3/5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC36,.25SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-XQCC-N36	SEPARATE OUTPUT		5.5 V	.8 mm		6 mm	Not Qualified		100 dB	1.8 V				e0	BREAK-BEFORE-MAKE			140 ns	3.5 ohm	50 ns	.2 ohm	6 mm
ADG722ACPZ-REEL7	Analog Devices	SPST	INDUSTRIAL	8	HVSON	RECTANGULAR	YES	PLASTIC/EPOXY		2	1	CMOS		NO LEAD			3 V	3/5	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.11,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-N8	SEPARATE OUTPUT	1	5.5 V	.8 mm		2 mm	Not Qualified	NC	60 dB	1.8 V	ALSO OPEARTES AT 5 V SUPPLY			e3	BREAK-BEFORE-MAKE		260	24 ns	10 ohm	11 ns	.3 ohm	3 mm
ADG723ACPZ-REEL	Analog Devices	SPST	INDUSTRIAL	8	HVSON	RECTANGULAR	YES	PLASTIC/EPOXY		2	1	CMOS		NO LEAD			3 V	3/5	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.11,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-N8	SEPARATE OUTPUT	1	5.5 V	.8 mm		2 mm	Not Qualified	NO/NC	60 dB	1.8 V	ALSO OPEARTES AT 5 V SUPPLY			e3	BREAK-BEFORE-MAKE		260	24 ns	10 ohm	11 ns	.3 ohm	3 mm
MAX4903EBL-T	Maxim Integrated	SPDT	INDUSTRIAL	9	VFBGA	SQUARE	YES	PLASTIC/EPOXY		1	1	BICMOS		BALL			3 V	3/5	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA9,3X3,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	BOTTOM	S-PBGA-B9	SEPARATE OUTPUT	1	5.5 V	.67 mm		1.52 mm	Not Qualified	NO	70 dB	1.8 V				e0	BREAK-BEFORE-MAKE		245	100 ns	1 ohm	100 ns	.01 ohm	1.52 mm
DG406EUI-T	Maxim Integrated	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	1 mA	1	16	CMOS		GULL WING	-20 V	-15 V	15 V	12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G28		1	20 V	1.1 mm	.03 A	4.4 mm	Not Qualified		69 dB	4.5 V			-4.5 V	e0	BREAK-BEFORE-MAKE			200 ns	100 ohm	150 ns	1.5 ohm	9.7 mm
NLAS7222AMTR2G	Onsemi	DPDT	INDUSTRIAL	10	VQCCN	RECTANGULAR	YES	UNSPECIFIED		1	2	CMOS		NO LEAD			3.3 V	3.3	CHIP CARRIER, VERY THIN PROFILE	LCC10,.06X.07,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-XQCC-N10	SEPARATE OUTPUT	1	3.6 V	.8 mm		1.4 mm	Not Qualified		28 dB	3 V				e4	BREAK-BEFORE-MAKE	30	260	30 ns	9 ohm	25 ns	.35 ohm	1.8 mm
NLAS7222AMUR2G	Onsemi	DPDT	INDUSTRIAL	10	VQCCN	RECTANGULAR	YES	UNSPECIFIED		1	2	CMOS		NO LEAD			3.3 V	3.3	CHIP CARRIER, VERY THIN PROFILE	LCC10,.06X.07,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-XQCC-N10	SEPARATE OUTPUT	1	3.6 V	.6 mm		1.4 mm	Not Qualified		28 dB	3 V				e4	BREAK-BEFORE-MAKE	30	260	30 ns	9 ohm	25 ns	.35 ohm	1.8 mm
ADG736LBRMZ-REEL	Analog Devices	SPDT	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified		82 dB	1.8 V				e3	BREAK-BEFORE-MAKE		260	20 ns	8 ohm	10 ns	.1 ohm	3 mm
TS12A4517DRG4	Texas Instruments	SPST	INDUSTRIAL	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.5 mA	1	1	CMOS	464 kHz	GULL WING	-1.95 V	-1.8 V	1.8 V	1.8/5	SMALL OUTLINE	SOP8,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	SEPARATE OUTPUT	1	1.95 V	1.75 mm		3.9 mm	Not Qualified	NC	83 dB	1 V	SUPPLY VOLTAGE CAN ALSO OPERATE WITH 3V TO 3.6V		-1 V	e4	BREAK-BEFORE-MAKE	NOT SPECIFIED	260	120 ns	40 ohm	150 ns		4.9 mm
TS5A26542YZTR	Texas Instruments	SPDT	INDUSTRIAL	12	VFBGA	RECTANGULAR	YES	UNSPECIFIED	.0005 mA	2	2		43 kHz	BALL			2.5 V	2.5/5	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA12,3X4,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	R-XBGA-B12	SEPARATE OUTPUT	1	5.5 V	.625 mm		1.37 mm	Not Qualified		63 dB	2.25 V	IT CAN ALSO OPERATE WITH 4.5V TO 5.5V	0 V		e1	BREAK-BEFORE-MAKE	30	260	35 ns	1.6 ohm	20 ns	.15 ohm	1.87 mm	5.5 V
MC74LVX8051DTR2G	Onsemi	SINGLE-ENDED MULTIPLEXER	MILITARY	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.16 mA	1	8	CMOS		GULL WING			3 V	2.5/6	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	125 Cel	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		1	6 V	1.2 mm	.02 A	4.4 mm	Not Qualified		37 dB	2.5 V				e4		30	260	15 ns	50 ohm	30 ns	25 ohm	5 mm
MC74LVX4051DTG	Onsemi	SINGLE-ENDED MULTIPLEXER	MILITARY	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.16 mA	1	8	CMOS		GULL WING	-6 V	-3 V	3 V	2/6,GND/-6	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	125 Cel	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		1	6 V	1.2 mm	.02 A	4.4 mm	Not Qualified		70 dB	2.5 V	ALSO OPERATES WITH 2.5V TO 6V SINGLE SUPPLY		0 V	e4		30	260	28 ns	37 ohm	28 ns	15 ohm	5 mm

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.