POWER SUPPLY SUPPORT CIRCUIT Power Management ICs 2,400+

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Maximum Switching Frequency	Package Body Material	Maximum Supply Current (Isup)	Maximum Output Current	No. of Functions	No. of Channels	Technology	Screening Level	Terminal Form	Control Technique	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Switcher Config	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Output Voltage	Control Mode	Minimum Operating Temperature	Terminal Finish	Maximum Output Voltage	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width (mm)	Qualification	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Input Voltage	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	No. of Outputs	Peak Reflow Temperature (C)	Nominal Threshold Voltage (V)	Length	Adjustable Threshold	Nominal Output Voltage	Maximum Input Voltage
ADM6348-40ARTZ-R7	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.00175 mA		1	1			GULL WING		3 V	1/5.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TO-236	Power Management Circuits	.96 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-G3		5.5 V	1.12 mm	1.3 mm	Not Qualified	1 V	RESET THRESHOLD VOLTAGE IS 3.0 V		e3				+4.0V	2.9 mm	NO
TL7705ACD1/A	STMicroelectronics	POWER SUPPLY SUPPORT CIRCUIT	COMMERCIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			GULL WING		5 V			SMALL OUTLINE			1.27 mm	70 Cel			0 Cel			DUAL	R-PDSO-G8		18 V	1.75 mm	3.9 mm	Not Qualified	3.6 V								4.9 mm	NO
TL7705ACP/A	STMicroelectronics	POWER SUPPLY SUPPORT CIRCUIT	COMMERCIAL	8	DIP	RECTANGULAR	NO		PLASTIC/EPOXY			1	1			THROUGH-HOLE		5 V			IN-LINE			2.54 mm	70 Cel			0 Cel			DUAL	R-PDIP-T8		18 V	5.08 mm	7.62 mm	Not Qualified	3.6 V									NO
TL7705AID1/A	STMicroelectronics	POWER SUPPLY SUPPORT CIRCUIT	COMMERCIAL EXTENDED	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			GULL WING		5 V			SMALL OUTLINE			1.27 mm	85 Cel			-25 Cel			DUAL	R-PDSO-G8		18 V	1.75 mm	3.9 mm	Not Qualified	3.6 V								4.9 mm	NO
TL7705AID1013TRA	STMicroelectronics	POWER SUPPLY SUPPORT CIRCUIT	COMMERCIAL EXTENDED	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			GULL WING		5 V			SMALL OUTLINE			1.27 mm	85 Cel			-25 Cel			DUAL	R-PDSO-G8		18 V	1.75 mm	3.9 mm	Not Qualified	3.6 V								4.9 mm	NO
MAX803SQ263T1G	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3	VSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.0025 mA		1	1	CMOS		GULL WING		5 V	1.2/5.5		SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP3/6,.08	Power Management Circuits	.65 mm	105 Cel			-40 Cel	Matte Tin (Sn) - annealed		DUAL	R-PDSO-G3	1	5.5 V	1 mm	1.24 mm	Not Qualified	1.2 V	RESET THRESHOLD VOLTAGE IS 2.63V		e3	40		260	+2.63V	2.1 mm	NO
BQ24075TRGTT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	HVQCCN	SQUARE	YES		PLASTIC/EPOXY	1.5 mA		1	1			NO LEAD		5 V	4.5/6.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Power Management Circuits	.5 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		QUAD	S-PQCC-N16	2	6.4 V	1 mm	3 mm	Not Qualified	4.35 V	DETECTION THRESHOLD VOLTAGE IS 0.08V; I/P ACCEPTS UP TO 26V WITHOUT DAMAGE, BUT OPERATN IS SUSPENDED		e4	NOT SPECIFIED		260	+6.6V	3 mm	YES
BQ24079TRGTT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	HVQCCN	SQUARE	YES		PLASTIC/EPOXY	1.5 mA		1	1			NO LEAD		5 V	4.5/6.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Power Management Circuits	.5 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		QUAD	S-PQCC-N16	2	6.4 V	1 mm	3 mm	Not Qualified	4.35 V	DETECTION THRESHOLD VOLTAGE IS 0.08V; I/P ACCEPTS UP TO 26V WITHOUT DAMAGE, BUT OPERATN IS SUSPENDED		e4	NOT SPECIFIED		260	+6.6V	3 mm	YES
TPS3307-18MDREPG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	MILITARY	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	.04 mA		1	3			GULL WING		3.3 V	2/6		SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	125 Cel			-55 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G8	1	6 V	1.75 mm	3.9 mm	Not Qualified	2 V			e4	30		260	+1.25,1.68,2.93V	4.9 mm	YES
BQ24086DRCT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	OTHER	10	HVSON	SQUARE	YES		PLASTIC/EPOXY	6 mA		1	1			NO LEAD		4.5 V	3.5/6.5		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.12,20	Power Management Circuits	.5 mm	125 Cel			0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	S-PDSO-N10	2	6.5 V	1 mm	3 mm	Not Qualified	4.35 V			e4	NOT SPECIFIED		260	+6.5V	3 mm	YES
UCC3917DG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	COMMERCIAL	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	11 mA		1	1			GULL WING					SMALL OUTLINE	SOP16,.25	Power Management Circuits	1.27 mm	70 Cel			0 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G16	2		1.75 mm	3.9 mm	Not Qualified				e4	30		260		9.9 mm	YES
MCP73837-NVI/MF	Microchip Technology	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	10	HVSON	SQUARE	YES		PLASTIC/EPOXY	3 mA		1	1		TS 16949	NO LEAD		5.35 V	5		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.12,20	Power Management Circuits	.5 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	S-PDSO-N10	1	6 V	1 mm	3 mm	Not Qualified	4.65 V			e3			260	+4.35V	3 mm	YES
MCP73837T-NVI/MF	Microchip Technology	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	10	HVSON	SQUARE	YES		PLASTIC/EPOXY	3 mA		1	1		TS 16949	NO LEAD		5.35 V	5		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.12,20	Power Management Circuits	.5 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	S-PDSO-N10	1	6 V	1 mm	3 mm	Not Qualified	4.65 V			e3			260	+4.35V	3 mm	YES
MCP73838-NVI/MF	Microchip Technology	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	10	HVSON	SQUARE	YES		PLASTIC/EPOXY	3 mA		1	1		TS 16949	NO LEAD		5.35 V	5		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.12,20	Power Management Circuits	.5 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	S-PDSO-N10	1	6 V	1 mm	3 mm	Not Qualified	4.65 V			e3			260	+4.35V	3 mm	YES
MCP73838T-NVI/MF	Microchip Technology	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	10	HVSON	SQUARE	YES		PLASTIC/EPOXY	3 mA		1	1		TS 16949	NO LEAD		5.35 V	5		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.12,20	Power Management Circuits	.5 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	S-PDSO-N10	1	6 V	1 mm	3 mm	Not Qualified	4.65 V			e3			260	+4.35V	3 mm	YES
DS1814CR-10-U	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.015 mA		1	1	CMOS		GULL WING		5 V	1.2/5.5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	85 Cel			-40 Cel	TIN LEAD		DUAL	R-PDSO-G5		5.5 V	1.45 mm	1.625 mm	Not Qualified	1 V			e0					2.9 mm	NO
DS1814CR-5-U	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.015 mA		1	1	CMOS		GULL WING		5 V	1.2/5.5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	85 Cel			-40 Cel	TIN LEAD		DUAL	R-PDSO-G5	1	5.5 V	1.45 mm	1.625 mm	Not Qualified	1 V			e0					2.9 mm	NO
DS1816R-10-U	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3	TSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.035 mA		1	1	CMOS		GULL WING		3.3 V	1.2/5.5		SMALL OUTLINE, THIN PROFILE	TO-236	Power Management Circuits	.95 mm	85 Cel			-40 Cel	Tin/Lead (Sn/Pb)		DUAL	R-PDSO-G3	1	5.5 V	1.12 mm	1.3 mm	Not Qualified	0 V			e0	20		240	+2.88V	2.92 mm	NO
DS1819CR-10-U	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.012 mA		1	1	CMOS		GULL WING		3.3 V	1.2/5.5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	85 Cel			-40 Cel	TIN LEAD		DUAL	R-PDSO-G5		5.5 V	1.45 mm	1.625 mm	Not Qualified	1.2 V			e0					2.9 mm	NO
DS1819CR-5-U	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.012 mA		1	1	CMOS		GULL WING		3.3 V	1.2/5.5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	85 Cel			-40 Cel	TIN LEAD		DUAL	R-PDSO-G5	1	5.5 V	1.45 mm	1.625 mm	Not Qualified	1.2 V			e0					2.9 mm	NO
MAX1823BEUB-T	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	10	TSSOP	SQUARE	YES		PLASTIC/EPOXY			1	1	BICMOS		GULL WING		5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.5 mm	85 Cel			-40 Cel	TIN LEAD		DUAL	S-PDSO-G10	1	5.5 V	1.1 mm	3 mm	Not Qualified	4 V			e0					3 mm	NO
MAX4864LEUT	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.12 mA		1	1	BICMOS		GULL WING		5 V	5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Power Management Circuits	.95 mm	85 Cel			-40 Cel	TIN LEAD		DUAL	R-PDSO-G6	1	28 V	1.45 mm	1.625 mm	Not Qualified	1.2 V			e0			245		2.9 mm	NO
MAX4865LEUT	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	VSON	SQUARE	YES		UNSPECIFIED	.12 mA		1	1	BICMOS		NO LEAD		5 V	5		SMALL OUTLINE, VERY THIN PROFILE	TSOP6,.11,37	Power Management Circuits	.65 mm	85 Cel			-40 Cel	TIN LEAD		DUAL	S-XDSO-N6	1	28 V	.8 mm	2 mm	Not Qualified	1.2 V			e0			245		2 mm	NO
BQ24109RHLT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	20	HQCCN	RECTANGULAR	YES	1100 kHz	PLASTIC/EPOXY	5 mA	4.5 A	1	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG			.5 mm	125 Cel		VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD		QUAD	R-PQCC-N20	2	16 V	1 mm	3.5 mm	Not Qualified	4.35 V		4.35 V	e4	30		260		4.5 mm	NO	4.2 V	16 V
TPS2068DR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	COMMERCIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	.07 mA		1	1			GULL WING		3.3 V			SMALL OUTLINE			1.27 mm	70 Cel			0 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G8	2	5.5 V	1.75 mm	3.9 mm	Not Qualified	2.7 V	UNDERVOLTAGE LOCKOUT		e4	30		260		4.9 mm	NO
TPS2068D	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	COMMERCIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	.07 mA		1	1			GULL WING		3.3 V			SMALL OUTLINE			1.27 mm	70 Cel			0 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G8	2	5.5 V	1.75 mm	3.9 mm	Not Qualified	2.7 V	UNDERVOLTAGE LOCKOUT		e4	30		260		4.9 mm	NO
TPS650243RHBR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	32	HVQCCN	SQUARE	YES	2550 kHz	PLASTIC/EPOXY	2.5 mA	1.6 A	1	2			NO LEAD		3.6 V	3.6		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Power Management Circuits	.5 mm	85 Cel	.6 V		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	6 V	QUAD	S-PQCC-N32	2	6 V	1 mm	5 mm	Not Qualified	2.5 V			e4	NOT SPECIFIED	6	260		5 mm	YES
TPS650243RHBT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	32	HVQCCN	SQUARE	YES	2550 kHz	PLASTIC/EPOXY	2.5 mA	1.6 A	1	2			NO LEAD		3.6 V	3.6		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Power Management Circuits	.5 mm	85 Cel	.6 V		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	6 V	QUAD	S-PQCC-N32	2	6 V	1 mm	5 mm	Not Qualified	2.5 V			e4	NOT SPECIFIED	6	260		5 mm	YES
TPS650245RHBR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	32	HVQCCN	SQUARE	YES	2550 kHz	PLASTIC/EPOXY	2.5 mA	1 A	1	2			NO LEAD		3.6 V	3.6		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Power Management Circuits	.5 mm	85 Cel	.6 V		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	6 V	QUAD	S-PQCC-N32	2	6 V	1 mm	5 mm	Not Qualified	2.5 V			e4	NOT SPECIFIED	6	260		5 mm	YES
TPS650245RHBT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	32	HVQCCN	SQUARE	YES	2550 kHz	PLASTIC/EPOXY	2.5 mA	1 A	1	2			NO LEAD		3.6 V	3.6		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Power Management Circuits	.5 mm	85 Cel	.6 V		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	6 V	QUAD	S-PQCC-N32	2	6 V	1 mm	5 mm	Not Qualified	2.5 V			e4	NOT SPECIFIED	6	260		5 mm	YES
ADM1027ARQZ-RL7	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	OTHER	24	SSOP	RECTANGULAR	YES		PLASTIC/EPOXY	3 mA		1	9			GULL WING		3.3 V	3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP24,.24	Motion Control Electronics	.635 mm	105 Cel			0 Cel	TIN		DUAL	R-PDSO-G24	1	5.5 V	1.75 mm	3.9116 mm	Not Qualified	3 V	IT CAN ALSO OPERATE FROM A 5V NOMINAL SUPPLY		e3			260		8.6614 mm	YES
ADM1026JSTZ-R7	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	OTHER	48	LFQFP	SQUARE	YES		PLASTIC/EPOXY			1	19			GULL WING		3.3 V			FLATPACK, LOW PROFILE, FINE PITCH			.5 mm	100 Cel			0 Cel	TIN		QUAD	S-PQFP-G48	3	5.5 V	1.6 mm	7 mm	Not Qualified	3 V			e3	30		260		7 mm	NO
S-8232PAFT-T2-G	Ablic	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.0127 mA		1	1			GULL WING			2/16		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	Power Management Circuits	.65 mm	85 Cel			-40 Cel			DUAL	R-PDSO-G8		16 V	1.1 mm	3 mm	Not Qualified	2 V	DETECTION THRESHOLD VOLTAGE IS 4.305V			NOT SPECIFIED		NOT SPECIFIED	+4.305V	4.4 mm	YES
TPS65023BRSBT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	40	HVQCCN	SQUARE	YES	2550 kHz	PLASTIC/EPOXY	2.5 mA	1.7 A	1	3			NO LEAD		3.6 V	3.6		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.2SQ,16	Power Management Circuits	.4 mm	85 Cel	.6 V		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	6 V	QUAD	S-PQCC-N40	2	6 V	.8 mm	5 mm	Not Qualified	2.5 V			e4	NOT SPECIFIED	6	260		5 mm	YES
APM8600FB-7	Diodes Incorporated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	14	VSON	SQUARE	YES		PLASTIC/EPOXY	1.2 mA		1	1			NO LEAD		5 V	5		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC14,.12,16	Power Management Circuits	.4 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	S-PDSO-N14	1	28 V	.63 mm	3 mm	Not Qualified	0 V			e4	30		260		3 mm	YES
INA219BID	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	1 mA		1	1			GULL WING		3.3 V	3.3		SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	125 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	3 V			e4	30		260	+2V	4.9 mm	NO
CAT8801MSD-GT3	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			GULL WING					SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G3	1	5.5 V	1.1 mm	1.25 mm	Not Qualified	1.2 V	RESET THRESHOLD VOLTAGE IS 4.38V		e4	30		260	+4.38V	2 mm	NO
CAT8801MTB-GT3	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			GULL WING					SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.95 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G3	1	5.5 V	1.22 mm	1.3 mm	Not Qualified	1.2 V	RESET THRESHOLD VOLTAGE IS 4.38V		e4	30		260	+4.38V	2.92 mm	NO
CAT8801RSD-GT3	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			GULL WING					SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G3	1	5.5 V	1.1 mm	1.25 mm	Not Qualified	1.2 V	RESET THRESHOLD VOLTAGE IS 2.63V		e4	30		260	+2.63V	2 mm	NO
CAT8801SSD-GT3	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			GULL WING					SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G3	1	5.5 V	1.1 mm	1.25 mm	Not Qualified	1.2 V	RESET THRESHOLD VOLTAGE IS 2.925V		e4	30		260	+2.925V	2 mm	NO
CAT8801STB-GT3	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			GULL WING					SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.95 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G3	1	5.5 V	1.22 mm	1.3 mm	Not Qualified	1.2 V	RESET THRESHOLD VOLTAGE IS 2.925V		e4	30		260	+2.925V	2.92 mm	NO
CAT8801TSD-GT3	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			GULL WING					SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G3	1	5.5 V	1.1 mm	1.25 mm	Not Qualified	1.2 V	RESET THRESHOLD VOLTAGE IS 3.075V		e4	30		260	+3.075V	2 mm	NO
CAT8801TTB-GT3	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			GULL WING					SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.95 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G3	1	5.5 V	1.22 mm	1.3 mm	Not Qualified	1.2 V	RESET THRESHOLD VOLTAGE IS 3.075V		e4	30		260	+3.075V	2.92 mm	NO
CAT8801YSD-GT3	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			GULL WING					SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G3	1	5.5 V	1.1 mm	1.25 mm	Not Qualified	1.2 V	RESET THRESHOLD VOLTAGE IS 2.19V		e4	30		260	+2.19V	2 mm	NO
CAT8801ZTB-GT3	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			GULL WING					SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.95 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G3	1	5.5 V	1.22 mm	1.3 mm	Not Qualified	1.2 V	RESET THRESHOLD VOLTAGE IS 2.32V		e4	30		260	+2.32V	2.92 mm	NO
NCT210RQR2G	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	MILITARY	16	SSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	2			GULL WING		3.3 V			SMALL OUTLINE, SHRINK PITCH			.64 mm	125 Cel			-55 Cel	TIN		DUAL	R-PDSO-G16	1	3.6 V	1.73 mm	3.9 mm	Not Qualified	3 V			e3	30		260		4.89 mm	NO
BQ29419PWG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			GULL WING		14 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	110 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G8	2	25 V	1.2 mm	3 mm	Not Qualified	4 V			e4	30		260		4.4 mm	NO
BQ24113ARHLRG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	20	HQCCN	RECTANGULAR	YES	1100 kHz	PLASTIC/EPOXY	5 mA	4.5 A	1	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG			.5 mm	85 Cel		VOLTAGE-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		QUAD	R-PQCC-N20	2	16 V	1 mm	3.5 mm	Not Qualified	4.35 V		4.35 V	e4	NOT SPECIFIED		260		4.5 mm	NO	4.2 V	16 V

Power Management ICs

Power Management ICs (PMICs) are electronic components that are used to regulate and manage the power supply in electronic systems. They are used to optimize power usage, reduce power consumption, and increase battery life in portable devices.

PMICs typically include a range of components such as voltage regulators, power switches, and battery management circuits. Voltage regulators are used to maintain a stable voltage output despite fluctuations in the input voltage or load. Power switches are used to control the flow of power in a circuit, and battery management circuits are used to monitor and manage the charging and discharging of batteries.

PMICs are used in a wide range of applications, including mobile phones, laptops, tablets, and other portable devices. They are also used in automotive electronics, power supplies, and industrial automation systems. PMICs play a critical role in managing power consumption in electronic systems, reducing energy waste and extending battery life.

One of the key advantages of PMICs is their ability to provide multiple functions in a single package, reducing the number of components needed in a system and simplifying design. They also help to improve system reliability by protecting against overvoltage, overcurrent, and overtemperature conditions.