AUTOMOTIVE Power Management ICs 1,493

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Screening Level	Terminal Form	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Switcher Config	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width (mm)	Qualification	Minimum Supply Voltage (Vsup)	Additional Features	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	No. of Outputs	Peak Reflow Temperature (C)	Maximum On-state Resistance (Ron)	Nominal Threshold Voltage (V)	Length	Adjustable Threshold
BQ24751BRHDRG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	28	HVQCCN	SQUARE	YES	PLASTIC/EPOXY		1	1			NO LEAD		7/24		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.2SQ,20	Power Management Circuits	.5 mm	125 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N28	2	24 V	1 mm	5 mm	Not Qualified	5 V		e4		30		260			5 mm	YES
BQ24751BRHDTG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	28	HVQCCN	SQUARE	YES	PLASTIC/EPOXY		1	1			NO LEAD			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	125 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N28	2	24 V	1 mm	5 mm	Not Qualified	5 V		e4		30		260			5 mm	YES
BD3005HFP-TR	ROHM	POWER SUPPLY MANAGEMENT CIRCUIT	AUTOMOTIVE	7		RECTANGULAR	YES	PLASTIC/EPOXY		1	1			GULL WING	13.5 V			SMALL OUTLINE, HEAT SINK/SLUG			1.27 mm	125 Cel	-40 Cel		SINGLE	R-PSSO-G7		36 V	2.005 mm	8 mm	Not Qualified	5.5 V				NOT SPECIFIED		NOT SPECIFIED			9.395 mm	NO
UCD90910RGCR	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	AUTOMOTIVE	64	HVQCCN	SQUARE	YES	PLASTIC/EPOXY		1	1			NO LEAD	3.3 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	125 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N64	3	3.6 V	1 mm	9 mm	Not Qualified	3 V		e4		NOT SPECIFIED		260			9 mm	YES
UCD90910RGCT	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	AUTOMOTIVE	64	HVQCCN	SQUARE	YES	PLASTIC/EPOXY		1	1			NO LEAD	3.3 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	125 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N64	3	3.6 V	1 mm	9 mm	Not Qualified	3 V		e4		NOT SPECIFIED		260			9 mm	YES
2U3809K33QDBVRG4Q1	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	3	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.03 mA	1	1		AEC-Q100	GULL WING	3.3 V	3.3		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TO-236	Power Management Circuits	.95 mm	125 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G3	1	6 V	1.45 mm	1.6 mm	Not Qualified	2 V	RESET THRESHOLD VOLTAGE IS 2.93V	e4		30		260		+2.93V	2.9 mm	NO
2U3823-25QDBVRG4Q1	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	AUTOMOTIVE	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.025 mA	1	1		AEC-Q100	GULL WING	2.5 V	1.1/5.5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	125 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G5	1	5.5 V	1.45 mm	1.6 mm	Not Qualified	1.1 V	RESET THRESHOLD VOLTAGE IS 2.25V; MANUAL RESET INPUT; POWER-ON RESET GENERATOR	e4		30		260			2.9 mm	NO
2U3823-30QDBVRG4Q1	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	AUTOMOTIVE	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.025 mA	1	1		AEC-Q100	GULL WING	3 V	1.1/5.5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	125 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G5	1	5.5 V	1.45 mm	1.6 mm	Not Qualified	1.1 V	RESET THRESHOLD VOLTAGE IS 2.63V; MANUAL RESET INPUT; POWER-ON RESET GENERATOR	e4		30		260			2.9 mm	NO
2U3824-50QDBVRG4Q1	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	AUTOMOTIVE	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.025 mA	1	1		AEC-Q100	GULL WING	5 V	1.1/5.5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	125 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G5	1	5.5 V	1.45 mm	1.6 mm	Not Qualified	1.1 V	RESET THRESHOLD VOLTAGE IS 4.55V; POWER-ON RESET GENERATOR	e4		30		260			2.9 mm	NO
2U3825-33QDBVRG4Q1	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.025 mA	1	1		AEC-Q100	GULL WING	3.3 V	1.1/5.5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	125 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G5	1	5.5 V	1.45 mm	1.6 mm	Not Qualified	1.1 V	RESET THRESHOLD VOLTAGE IS 2.93V; MANUAL RESET INPUT; POWER-ON RESET GENERATOR	e4		30		260			2.9 mm	NO
ADM6384YKS31D1Z-R7	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	4	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.013 mA	1	1			GULL WING	1.8 V	1/5.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP4/6,.08	Power Management Circuits	.5 mm	125 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G4	1	5.5 V	1.1 mm	1.25 mm	Not Qualified	1 V	RESET THRESHOLD VOLTAGE IS 3.08V	e4				260		+3.08V	2 mm	NO
TLC7733QPWRG4Q1	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	8	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.016 mA	1	1	CMOS		GULL WING	2.7 V	2/6		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	Power Management Circuits	.65 mm	125 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	6 V	1.2 mm	3 mm	Not Qualified	2 V	RESET THRESHOLD VOLTAGE IS 2.93V; POWER-ON RESET GENERATOR	e4		30		260		+2.93V	4.4 mm	NO
TPS3307-18QDRG4Q1	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.04 mA	1	3		AEC-Q100	GULL WING	3.3 V	2/6		SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	125 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	6 V	1.75 mm	3.9 mm	Not Qualified	2 V	RESET THRESHOLD VOLTAGE IS 2.93V; MANUAL RESET INPUT; POWER-ON RESET GENERATOR	e4		30		260		2.93	4.9 mm	YES
74LVCV2G66DP,125	NXP Semiconductors	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING	3 V	2.5/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.16	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	S-PDSO-G8	1	5.5 V	1.1 mm	3 mm	Not Qualified	2.3 V		e4	MAKE-BEFORE-BREAK	30		260	30 ohm		3 mm	NO
TPS2556QDRBTQ1	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	8	HVSON	SQUARE	YES	PLASTIC/EPOXY	.12 mA	1	1			NO LEAD	5 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.65 mm	125 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	S-PDSO-N8	2	6.5 V	1 mm	3 mm		2.5 V		e4		NOT SPECIFIED		260			3 mm	YES
UCD3138064RMHR	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	AUTOMOTIVE	40	HVQCCN	SQUARE	YES	PLASTIC/EPOXY		1	1			NO LEAD	3.3 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	125 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N40	2	3.6 V	.8 mm	6 mm		3 V		e4		30	8	260			6 mm	NO
UCD3138064RMHT	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	AUTOMOTIVE	40	HVQCCN	SQUARE	YES	PLASTIC/EPOXY		1	1			NO LEAD	3.3 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	125 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N40	2	3.6 V	.8 mm	6 mm		3 V		e4		30	8	260			6 mm	NO
ADM1270ACPZ-R7	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	16	HVQCCN	SQUARE	YES	PLASTIC/EPOXY		1	1			NO LEAD	10 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-N16	3	60 V	.8 mm	3 mm		4 V		e3		30		260			3 mm	NO
UCS1002-1-BP-TR	Microchip Technology	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	20	HVQCCN	SQUARE	YES	UNSPECIFIED	.75 mA	1	1			NO LEAD	5 V	5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.16SQ,20	Power Management Circuits	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N20		5.5 V	.9 mm	4 mm	Not Qualified	4.5 V		e3						2.5	4 mm
NCP300LSN20T3G	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	5	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1			GULL WING	.7 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.95 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G5	1	10 V	1.1 mm	1.5 mm		.55 V	DETECTOR THRESHOLD VOLTAGE IS 2V	e3		30		260		+2V	3 mm	NO
NCP803SN463D1T1G	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	3	TSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0025 mA	1	1			GULL WING	3.3 V			SMALL OUTLINE, THIN PROFILE	TO-236		.95 mm	105 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G3	1	5.5 V	1.11 mm	1.3 mm		1.2 V		e3		30		260		+4.63V	2.9 mm	NO
NCV305LSQ44T1G	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	4	TSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING	.85 V	0.8/10		SMALL OUTLINE, THIN PROFILE	TSOP4,.08	Power Management Circuits	1.3 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G4	1	10 V	1.1 mm	1.25 mm	Not Qualified	.8 V	THRESHOLD VOLTAGE IS 4.4V	e3		30		260		+4.4V	2 mm	NO
NCV303LSN22T1G	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	5	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0013 mA	1	1	CMOS		GULL WING	1.5 V	0.8/10		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G5	1	10 V	1.1 mm	1.5 mm	Not Qualified	.8 V	DETECTION THRESHOLD VOLTAGE IS 2.2V	e3		30		260		+2.2V	3 mm	NO
INA219AIDCNTG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	8	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	1 mA	1	2			GULL WING	3.3 V	3.3		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSSOP8,.1	Power Management Circuits	.65 mm	125 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	2	5.5 V	1.45 mm	1.6 mm	Not Qualified	3 V		e4		30		260		+2V	2.9 mm	NO
BQ24083DRCTG4	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	AUTOMOTIVE	10	HVSON	SQUARE	YES	PLASTIC/EPOXY	2 mA	1	1			NO LEAD		4.5/6.5		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.12,20	Power Management Circuits	.5 mm	125 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	S-PDSO-N10	2	6.5 V	1 mm	3 mm	Not Qualified	4.5 V		e4		NOT SPECIFIED		260			3 mm	YES
TPS3808G30DRVT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	6	HVSON	SQUARE	YES	PLASTIC/EPOXY	.006 mA	1	1			NO LEAD	3.3 V	1.8/6.5		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC6,.08,25	Power Management Circuits	.65 mm	125 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	S-PDSO-N6	1	6.5 V	.8 mm	2 mm	Not Qualified	1.7 V	DETECTOR THRESHOLD VOLTAGE IS 2.79V	e4		NOT SPECIFIED		260		+2.79V	2 mm	NO
TPS3306-15QDRG4Q1	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	AUTOMOTIVE	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.04 mA	1	2			GULL WING	3.3 V	3/5		SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	125 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	6 V	1.75 mm	3.9 mm	Not Qualified	2.7 V	RESET THRESHOLD IS 2.93V, POWER ON RESET GENERATOR	e4		30		260		+2.93,1.68V	4.9 mm	NO
TPS3306-33QDRG4Q1	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	AUTOMOTIVE	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.04 mA	1	2			GULL WING	3.3 V	3/5		SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	125 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	6 V	1.75 mm	3.9 mm	Not Qualified	2.7 V	RESET THRESHOLD IS 4.55V, POWER ON RESET GENERATOR	e4		30		260		+4.55,2.93V	4.9 mm	NO
BQ24125RHLRG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	20	HQCCN	RECTANGULAR	YES	PLASTIC/EPOXY	5 mA	1	1			NO LEAD			BUCK	CHIP CARRIER, HEAT SINK/SLUG			.5 mm	125 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	R-PQCC-N20	2	16 V	1 mm	3.5 mm	Not Qualified	4.35 V		e4		NOT SPECIFIED		260		+3.3V	4.5 mm	NO
BQ24314ADSGT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	8	HVSON	SQUARE	YES	PLASTIC/EPOXY	.6 mA	1	1			NO LEAD	5 V	3/30		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20	Power Management Circuits	.5 mm	125 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	S-PDSO-N8	2	30 V	.8 mm	2 mm	Not Qualified	3 V	RESET THRESHOLD VOLTAGE IS 5.85V	e4		NOT SPECIFIED		260		+2.7V	2 mm	YES
BQ24315DSGT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	8	VSON	SQUARE	YES	PLASTIC/EPOXY	.6 mA	1	1			NO LEAD	5 V	3.3/30		SMALL OUTLINE, VERY THIN PROFILE	SOLCC8,.08,20	Power Management Circuits	.5 mm	125 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	S-PDSO-N8	2	30 V	.8 mm	2 mm	Not Qualified	3.3 V	RESET THRESHOLD VOLTAGE IS 5.85V	e4		NOT SPECIFIED		260		+2.7V	2 mm	YES
NCP302HSN40T1	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	5	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING	1.5 V	0.8/10		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	125 Cel	-40 Cel	Tin/Lead (Sn80Pb20)	DUAL	R-PDSO-G5		10 V	1.1 mm	1.5 mm	Not Qualified	.8 V	DETECTION THRESHOLD VOLTAGE IS 4.0V	e0		30		235		+4V	3 mm	NO
NCP302LSN15T1	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	5	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0012 mA	1	1	CMOS		GULL WING	1.5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G5		10 V	1.1 mm	1.5 mm	Not Qualified	.8 V	DETECTION THRESHOLD VOLTAGE IS 1.5V	e0				235		+1.5V	3 mm	NO
NCP302LSN33T1	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	5	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0012 mA	1	1	CMOS		GULL WING	1.5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G5		10 V	1.1 mm	1.5 mm	Not Qualified	.8 V	DETECTION THRESHOLD VOLTAGE IS 3.3V	e0				235		+3.3V	3 mm	NO
NCP302LSN38T1	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	5	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0012 mA	1	1	CMOS		GULL WING	1.5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G5		10 V	1.1 mm	1.5 mm	Not Qualified	.8 V	DETECTION THRESHOLD VOLTAGE IS 3.8V	e0				235		+3.8V	3 mm	NO
NCP302LSN40T1	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	5	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0012 mA	1	1	CMOS		GULL WING	1.5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G5		10 V	1.1 mm	1.5 mm	Not Qualified	.8 V	DETECTION THRESHOLD VOLTAGE IS 4.0V	e0				235		+4V	3 mm	NO
NCP302LSN43T1	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	5	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0012 mA	1	1	CMOS		GULL WING	1.5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G5		10 V	1.1 mm	1.5 mm	Not Qualified	.8 V	DETECTION THRESHOLD VOLTAGE IS 4.3V	e0				235		+4.3V	3 mm	NO
NCP303LSN13T1	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	5	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING	1.5 V	0.8/10		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G5		10 V	1.1 mm	1.5 mm	Not Qualified	.8 V	DETECTION THRESHOLD VOLTAGE IS 1.3V	e0				235		+1.3V	3 mm	NO
NCP303LSN16T1	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	5	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0012 mA	1	1	CMOS		GULL WING	1.5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G5		10 V	1.1 mm	1.5 mm	Not Qualified	.8 V	DETECTION THRESHOLD VOLTAGE IS 1.6V	e0				235		+1.6V	3 mm	NO
NCP303LSN22T1	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	5	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0012 mA	1	1	CMOS		GULL WING	1.5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G5		10 V	1.1 mm	1.5 mm	Not Qualified	.8 V	DETECTION THRESHOLD VOLTAGE IS 2.2V	e0				235		+2.2V	3 mm	NO
NCP303LSN23T1	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	5	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING	1.5 V	0.8/10		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G5		10 V	1.1 mm	1.5 mm	Not Qualified	.8 V	DETECTION THRESHOLD VOLTAGE IS 2.3V	e0				235		+2.3V	3 mm	NO
NCP303LSN24T1	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	5	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0012 mA	1	1	CMOS		GULL WING	1.5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G5		10 V	1.1 mm	1.5 mm	Not Qualified	.8 V	DETECTION THRESHOLD VOLTAGE IS 2.4V	e0				235		+2.4V	3 mm	NO
NCP303LSN25T1	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	5	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0012 mA	1	1	CMOS		GULL WING	1.5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G5		10 V	1.1 mm	1.5 mm	Not Qualified	.8 V	DETECTION THRESHOLD VOLTAGE IS 2.5V	e0				235		+2.5V	3 mm	NO
NCP303LSN26T1	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	5	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0012 mA	1	1	CMOS		GULL WING	1.5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G5		10 V	1.1 mm	1.5 mm	Not Qualified	.8 V	DETECTION THRESHOLD VOLTAGE IS 2.6V	e0				235		+2.6V	3 mm	NO
NCP303LSN28T1	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	5	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0012 mA	1	1	CMOS		GULL WING	1.5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G5		10 V	1.1 mm	1.5 mm	Not Qualified	.8 V	DETECTION THRESHOLD VOLTAGE IS 2.8V	e0				235		+2.8V	3 mm	NO
NCP303LSN29T1	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	5	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0012 mA	1	1	CMOS		GULL WING	1.5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G5		10 V	1.1 mm	1.5 mm	Not Qualified	.8 V	DETECTION THRESHOLD VOLTAGE IS 2.9V	e0				235		+2.9V	3 mm	NO
NCP303LSN31T1	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	5	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0012 mA	1	1	CMOS		GULL WING	1.5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G5		10 V	1.1 mm	1.5 mm	Not Qualified	.8 V	DETECTION THRESHOLD VOLTAGE IS 3.1V	e0				235		+3.1V	3 mm	NO
NCP303LSN32T1	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	5	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0012 mA	1	1	CMOS		GULL WING	1.5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G5		10 V	1.1 mm	1.5 mm	Not Qualified	.8 V	DETECTION THRESHOLD VOLTAGE IS 3.2V	e0				235		+3.2V	3 mm	NO

Power Management ICs

Power Management ICs (PMICs) are electronic components that are used to regulate and manage the power supply in electronic systems. They are used to optimize power usage, reduce power consumption, and increase battery life in portable devices.

PMICs typically include a range of components such as voltage regulators, power switches, and battery management circuits. Voltage regulators are used to maintain a stable voltage output despite fluctuations in the input voltage or load. Power switches are used to control the flow of power in a circuit, and battery management circuits are used to monitor and manage the charging and discharging of batteries.

PMICs are used in a wide range of applications, including mobile phones, laptops, tablets, and other portable devices. They are also used in automotive electronics, power supplies, and industrial automation systems. PMICs play a critical role in managing power consumption in electronic systems, reducing energy waste and extending battery life.

One of the key advantages of PMICs is their ability to provide multiple functions in a single package, reducing the number of components needed in a system and simplifying design. They also help to improve system reliability by protecting against overvoltage, overcurrent, and overtemperature conditions.