INDUSTRIAL Power Management ICs 2,400+

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Maximum Switching Frequency	Package Body Material	Maximum Supply Current (Isup)	Maximum Output Current	No. of Functions	No. of Channels	Technology	Terminal Form	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Switcher Config	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Output Voltage	Control Mode	Minimum Operating Temperature	Terminal Finish	Maximum Output Voltage	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width (mm)	Qualification	Minimum Supply Voltage (Vsup)	Additional Features	Maximum Negative Input Voltage	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	No. of Outputs	Peak Reflow Temperature (C)	Maximum On-state Resistance (Ron)	Nominal Threshold Voltage (V)	Length	Adjustable Threshold
TPS2393APWRG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	14	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	1.5 mA	500 A	1	1		GULL WING	-48 V		-48		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	Power Management Circuits	.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G14	1	-20 V	1.2 mm	4.4 mm	Not Qualified	-80 V	-20 V TO -80 V WIDE INPUT SUPPLY RANGE		e4	30		260		+1.35V	5 mm	YES
STM1061N36WX6F	STMicroelectronics	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.0036 mA		1	1		GULL WING			1/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TO-236	Power Management Circuits	.96 mm	85 Cel			-40 Cel	Matte Tin (Sn)		DUAL	R-PDSO-G3	1	6 V	1.12 mm	1.3 mm	Not Qualified	.7 V	THRESHOLDS IN 0.1V INCREMENTS FROM 1.6V TO 5.5V		e3					+3.6V	2.92 mm	NO
STM1815RWX7F	STMicroelectronics	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.016 mA		1	1		GULL WING		3.6 V	1/5.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TO-236	Power Management Circuits	.96 mm	105 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-G3	1	5.5 V	1.12 mm	1.3 mm	Not Qualified	1.2 V	RESET THRESHOLD VOLTAGE IS 2.55V		e3	30		260		+2.55V	2.92 mm	NO
TL7702AIPE4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	DIP	RECTANGULAR	NO		PLASTIC/EPOXY	3 mA		1	1	BIPOLAR	THROUGH-HOLE		5 V	3.5/18		IN-LINE	DIP8,.3	Power Management Circuits	2.54 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDIP-T8		18 V	5.08 mm	7.62 mm	Not Qualified	3.5 V	POWER ON RESET GENERATOR		e4	NOT APPLICABLE		NOT APPLICABLE		2.53	9.81 mm	YES
ISPPAC-POWR1220AT8-01T100I	Lattice Semiconductor	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	100	LFQFP	SQUARE	YES		UNSPECIFIED	40 mA		1	12	CMOS	GULL WING		3.3 V	2.5/5,3/3.3		FLATPACK, LOW PROFILE, FINE PITCH	QFP100,.63SQ,20	Power Management Circuits	.5 mm	85 Cel			-40 Cel	TIN LEAD		QUAD	S-XQFP-G100	3	3.96 V	1.6 mm	14 mm	Not Qualified	2.8 V			e0	30		240			14 mm	YES
TL7757ILPRE3	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3	TO-92	ROUND	NO		PLASTIC/EPOXY	2 mA		1	1	BIPOLAR	WIRE		4.3 V	1/7		CYLINDRICAL	SIP3,.1,50	Power Management Circuits	1.27 mm	85 Cel			-40 Cel			BOTTOM	O-PBCY-W3		7 V			Not Qualified	1 V	RESET THRESHOLD VOLTAGE IS 4.55V			NOT SPECIFIED		NOT SPECIFIED		+4.55V		NO
TPS65021RHATG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	40	HVQCCN	SQUARE	YES	1700 kHz	PLASTIC/EPOXY	.043 mA	1.2 A	1	3		NO LEAD		3.6 V	3.6		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20	Power Management Circuits	.5 mm	85 Cel	.6 V		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	6 V	QUAD	S-PQCC-N40	3	6 V	1 mm	6 mm	Not Qualified	2.5 V			e4	NOT SPECIFIED	6	260			6 mm	YES
TPS65150PWPG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	24	HTSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.025 mA		1	3		GULL WING		3.3 V	3.3	BOOST	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP24,.25	Power Management Circuits	.65 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G24	2	6 V	1.2 mm	4.4 mm	Not Qualified	1.8 V		-2 V	e4	NOT SPECIFIED		260		+1.7V	7.8 mm	YES
TPS65150PWPRG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	24	HTSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.025 mA		1	3		GULL WING		3.3 V	3.3	BOOST	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP24,.25	Power Management Circuits	.65 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G24	2	6 V	1.2 mm	4.4 mm	Not Qualified	1.8 V		-2 V	e4	NOT SPECIFIED		260		+1.7V	7.8 mm	YES
TPS65150RGERG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	24	HVQCCN	SQUARE	YES		PLASTIC/EPOXY	.025 mA		1	3		NO LEAD		3.3 V	3.3	BOOST	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	Power Management Circuits	.5 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		QUAD	S-PQCC-N24	2	6 V	1 mm	4 mm	Not Qualified	1.8 V		-2 V	e4	NOT SPECIFIED		260		+1.7V	4 mm	YES
BQ24721RHBRG4	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	32	HVQCCN	SQUARE	YES		PLASTIC/EPOXY			1	1		NO LEAD		8 V	8/24		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Power Management Circuits	.5 mm	85 Cel			-40 Cel			QUAD	S-PQCC-N32		24 V	1 mm	5 mm	Not Qualified	8 V				NOT SPECIFIED		NOT SPECIFIED			5 mm	NO
TPS2061DRG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	.0005 mA		1	1		GULL WING		3.3 V			SMALL OUTLINE			1.27 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	2.7 V	UNDERVOLTAGE LOCKOUT		e4	30		260			4.9 mm	NO
TPS2206IDBG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	30	SSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	2	BICMOS	GULL WING		3.3 V	3.3,5,12		SMALL OUTLINE, SHRINK PITCH	SSOP30,.3	Power Management Circuits	.65 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G30	1	5.25 V	2 mm	5.3 mm	Not Qualified	0 V	ALSO REQUIRE 5V AND 12V		e4	NOT SPECIFIED		260	6 ohm		10.2 mm	NO
TPS2350PWRG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	14	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	2 mA	500 A	1	1		GULL WING	-48 V		-48		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	Power Management Circuits	.65 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G14	1	-12 V	1.2 mm	4.4 mm	Not Qualified	-80 V	IT OPERATES FROM A -12V TO -80V SUPPLY		e4	NOT SPECIFIED		260			5 mm	YES
TPS3305-18DGNG4	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	8	HTSSOP	SQUARE	YES		PLASTIC/EPOXY	.04 mA		1	2	CMOS	GULL WING		3.3 V	2/6		SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Power Management Circuits	.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	S-PDSO-G8	1	6 V	1.07 mm	3 mm	Not Qualified	2.7 V	RESET THRESHOLD IS 2.93V, POWER ON RESET GENERATOR		e4	30		260		+1.68V	3 mm	NO
TPS3306-15DG4	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	.04 mA		1	2		GULL WING		3.3 V	3/5		SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G8	1	6 V	1.75 mm	3.9 mm	Not Qualified	2.7 V	POWER-ON RESET GENERATOR		e4	30		260		+2.93,1.4V	4.9 mm	NO
TPS3617-50DGKG4	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	8	TSSOP	SQUARE	YES		PLASTIC/EPOXY	.04 mA		1	1		GULL WING		5 V	1.8/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Power Management Circuits	.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	S-PDSO-G8	1	5.5 V	1.1 mm	3 mm	Not Qualified	1.65 V	RESET THRESHOLD VOLTAGE IS 4.55V; POWER ON RESET GENERATOR		e4	30		260		4.55	3 mm	NO
TPS3809J25DBVTG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.025 mA		1	1		GULL WING		2.5 V	2/6		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TO-236	Power Management Circuits	.95 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G3	1	6 V	1.45 mm	1.6 mm	Not Qualified	2 V	RESET THRESHOLD VOLTAGE IS 2.25V		e4	30		260		+2.25V	2.9 mm	NO
TPS2042BDGNG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	HTSSOP	SQUARE	YES		PLASTIC/EPOXY	.09 mA		1	2		GULL WING		3.3 V			SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	S-PDSO-G8	1	5.5 V	1.1 mm	3 mm	Not Qualified	2.7 V	UNDERVOLTAGE LOCKOUT		e4	NOT SPECIFIED		260			3 mm	NO
TPS2044BDG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	.14 mA		1	4		GULL WING		3.3 V			SMALL OUTLINE			1.27 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	2.7 V	UNDERVOLTAGE LOCKOUT		e4	NOT SPECIFIED		260			9.9 mm	NO
TPS2071DAPG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	32	HTSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.185 mA		1	4		GULL WING		5 V	5,6/9		SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP32,.3	Power Management Circuits	.65 mm	125 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G32	3	5.5 V	1.2 mm	6.1 mm	Not Qualified	4.5 V			e4	30		260		+3,4.25,4.5V	11 mm	NO
BQ29312APWRG4	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	24	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	5		GULL WING		14 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G24	1	25 V	1.2 mm	4.4 mm	Not Qualified	4.5 V			e4	30		260			7.8 mm	NO
TPS2211IDBG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	SSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1	BICMOS	GULL WING		3.3 V	3.3/5,12		SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	Power Management Circuits	.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G16	1	13.5 V	2 mm	5.3 mm	Not Qualified	3 V	ALSO REQUIRES 5V AND 12V		e4	30		260			6.2 mm	NO
TPS2375PW-1G4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.35 mA		1	1		GULL WING		48 V	48		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	Power Management Circuits	.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G8	1	57 V	1.2 mm	3 mm	Not Qualified	0 V			e4	30		260			4.4 mm	NO
TPS2377D-1G4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	.35 mA		1	1		GULL WING		48 V	48		SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G8	1	57 V	1.75 mm	3.9 mm	Not Qualified	0 V			e4	30		260			4.9 mm	NO
TPS2011DG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	.1 mA		1	1		GULL WING		3 V			SMALL OUTLINE			1.27 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	2.7 V			e4	30		260			4.9 mm	NO
TPS2115ADRBT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	HVSON	SQUARE	YES		PLASTIC/EPOXY	.09 mA		1	2		NO LEAD		2.8 V	1.8/5		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.12,25	Power Management Circuits	.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	S-PDSO-N8	2	5.5 V	1 mm	3 mm	Not Qualified	1.5 V	CAN SWITCH A VOLTAGE AS LOW AS 1.5V AS LONG AS THERE IS A MIN OF 2.8V AT ONE OF THE I/P POWER PINS		e4	30		260			3 mm	YES
TPS2343DDPG3	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	80	HTSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			2	6		GULL WING		12 V	3.3,5,+-12		SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP80,.3,16	Power Management Circuits	.4 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-G80	2	13.2 V	1.2 mm	6.1 mm	Not Qualified	10.8 V	ALSO REQUIRES A -12V SUPPLY		e3	30		260			17 mm	YES
TPS2399DGKG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	TSSOP	SQUARE	YES		PLASTIC/EPOXY	1.5 mA	500 A	1	1		GULL WING	-48 V		-48		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Power Management Circuits	.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD SILVER		DUAL	S-PDSO-G8	2	-36 V	1.1 mm	3 mm	Not Qualified	-80 V	IT OPERATES FROM -36V TO -80V SUPPLY		e4	30		260			3 mm	YES
UC2543DWG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	15 mA		1	1	CMOS	GULL WING		10 V	4.5/40		SMALL OUTLINE	SOP16,.4	Power Management Circuits	1.27 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G16	2	40 V	2.65 mm	7.5 mm	Not Qualified	4.7 V			e4	30		260		+2.5V	10.3 mm	NO
UC2543NG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	DIP	RECTANGULAR	NO		PLASTIC/EPOXY	15 mA		1	1	CMOS	THROUGH-HOLE		10 V	4.5/40		IN-LINE	DIP16,.3	Power Management Circuits	2.54 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDIP-T16		40 V	5.08 mm	7.62 mm	Not Qualified	4.7 V			e4						19.305 mm	NO
UC2902DG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	10 mA	6 A	1	1	BIPOLAR	GULL WING		5 V	5	BUCK-BOOST	SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	85 Cel		VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G8	1	20 V	1.75 mm	3.9 mm	Not Qualified	2.7 V			e4	30		260		+0.7V	4.9 mm	YES
UC2903DWG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	18	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	15 mA		1	4	BIPOLAR	GULL WING		15 V			SMALL OUTLINE	SOP18,.4	Power Management Circuits	1.27 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G18	2	40 V	2.65 mm	7.5 mm	Not Qualified	8 V			e4	NOT SPECIFIED		260		1.8	11.55 mm	YES
UCC29002DG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	3.5 mA	2.5 A	1	1	BICMOS	GULL WING		12 V	12	BUCK-BOOST	SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	105 Cel		CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G8	1	13.5 V	1.75 mm	3.9 mm	Not Qualified	4.375 V			e4	30		260			4.9 mm	YES
UCC2912PWPRG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	24	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	2 mA		1	1	BICMOS	GULL WING		5 V	5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25	Power Management Circuits	.65 mm	85 Cel			-40 Cel			DUAL	R-PDSO-G24		8 V	1.2 mm	4.4 mm	Not Qualified	3 V				NOT SPECIFIED		NOT SPECIFIED			7.8 mm	YES
TPS2320IPWRG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	1 mA	500 A	1	2		GULL WING		4.5 V	3.3/5,3/13		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Power Management Circuits	.65 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G16	1	13 V	1.2 mm	4.4 mm	Not Qualified	3 V	REQUIRES 3V TO 5.5V SUPPLY FOR CHANNEL 2		e4	NOT SPECIFIED		260			5 mm	YES
ADM1810-5AKSZ-REEL	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.016 mA		1	1		GULL WING		5 V	1.2/5.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP3/6,.08	Power Management Circuits	.65 mm	105 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-G3	1	5.5 V	1.1 mm	1.25 mm	Not Qualified	1.2 V	RESET THRESHOLD VOLTAGE IS 4.62V		e3			260		+4.62V	2 mm	NO
ADM1811-5AKSZ-REEL	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.016 mA		1	1		GULL WING		5 V	1.2/5.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP3/6,.08	Power Management Circuits	.65 mm	105 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-G3	1	5.5 V	1.1 mm	1.25 mm	Not Qualified	1.2 V	RESET THRESHOLD VOLTAGE IS 4.62V		e3			260		+4.62V	2 mm	NO
ADM1815-5AKSZ-REEL	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.016 mA		1	1		GULL WING		5 V	1.2/5.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP3/6,.08	Power Management Circuits	.65 mm	105 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-G3	1	5.5 V	1.1 mm	1.25 mm	Not Qualified	1.2 V	RESET THRESHOLD VOLTAGE IS 3.06V		e3			260		+3.06V	2 mm	NO
ADM1816-5AKSZ-REEL	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.016 mA		1	1		GULL WING		5 V	1.2/5.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP3/6,.08	Power Management Circuits	.65 mm	105 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-G3	1	5.5 V	1.1 mm	1.25 mm	Not Qualified	1.2 V	RESET THRESHOLD VOLTAGE IS 3.06V		e3			260		+3.06V	2 mm	NO
ADM1066ACPZ-REEL7	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	40	HVQCCN	SQUARE	YES		UNSPECIFIED			1	10		NO LEAD			3/5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20	Power Management Circuits	.5 mm	85 Cel			-40 Cel	MATTE TIN		QUAD	S-XQCC-N40	3		1 mm	6 mm	Not Qualified				e3	30		260			6 mm	YES
ADM1066ACPZ-REEL	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	40	HVQCCN	SQUARE	YES		UNSPECIFIED			1	10		NO LEAD			3/5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20	Power Management Circuits	.5 mm	85 Cel			-40 Cel	MATTE TIN		QUAD	S-XQCC-N40			1 mm	6 mm	Not Qualified				e3						6 mm	YES
ADM1066ASUZ-REEL7	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	48	TFQFP	SQUARE	YES		PLASTIC/EPOXY			1	10		GULL WING			3/5		FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	Power Management Circuits	.5 mm	85 Cel			-40 Cel	MATTE TIN		QUAD	S-PQFP-G48	3		1.2 mm	7 mm	Not Qualified				e3			260			7 mm	YES
ADM1066ASUZ-REEL	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	48	TFQFP	SQUARE	YES		PLASTIC/EPOXY			1	10		GULL WING			3/5		FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	Power Management Circuits	.5 mm	85 Cel			-40 Cel	MATTE TIN		QUAD	S-PQFP-G48	3		1.2 mm	7 mm	Not Qualified				e3			260			7 mm	YES
ADM690AARMZ	Analog Devices	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	8	TSSOP	SQUARE	YES		PLASTIC/EPOXY			1	3	CMOS	GULL WING		5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	S-PDSO-G8	1	5.5 V	1.09 mm	3 mm	Not Qualified	1 V	RESET THRESHOLD VOLTAGE IS 4.65V		e3	30		260		+4.65V	3 mm	NO
ADM708ARMZ	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	TSSOP	SQUARE	YES		PLASTIC/EPOXY	.25 mA		1	1	CMOS	GULL WING		5 V	5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Power Management Circuits	.65 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	S-PDSO-G8	1	5.5 V	1.1 mm	3 mm	Not Qualified	1 V	RESET THRESHOLD VOLTAGE IS 4.4V; MANUAL RESET INPUT		e3			260		+4.4V	3 mm	NO
ADM690AARMZ-REEL	Analog Devices	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	8	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	3	CMOS	GULL WING		5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-G8	1	5.5 V	1.1 mm	3 mm	Not Qualified	1 V			e3	30		260			3 mm	NO
ADM1065ASUZ	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	48	TFQFP	SQUARE	YES		PLASTIC/EPOXY	6 mA		1	10	CMOS	GULL WING			3/14		FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	Power Management Circuits	.5 mm	85 Cel			-40 Cel	MATTE TIN		QUAD	S-PQFP-G48	3		1.2 mm	7 mm	Not Qualified				e3	30		260			7 mm	YES

Power Management ICs

Power Management ICs (PMICs) are electronic components that are used to regulate and manage the power supply in electronic systems. They are used to optimize power usage, reduce power consumption, and increase battery life in portable devices.

PMICs typically include a range of components such as voltage regulators, power switches, and battery management circuits. Voltage regulators are used to maintain a stable voltage output despite fluctuations in the input voltage or load. Power switches are used to control the flow of power in a circuit, and battery management circuits are used to monitor and manage the charging and discharging of batteries.

PMICs are used in a wide range of applications, including mobile phones, laptops, tablets, and other portable devices. They are also used in automotive electronics, power supplies, and industrial automation systems. PMICs play a critical role in managing power consumption in electronic systems, reducing energy waste and extending battery life.

One of the key advantages of PMICs is their ability to provide multiple functions in a single package, reducing the number of components needed in a system and simplifying design. They also help to improve system reliability by protecting against overvoltage, overcurrent, and overtemperature conditions.