20 Switching Regulators & Controllers 365

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Maximum Switching Frequency	Package Body Material	Maximum Supply Current (Isup)	Maximum Output Current	No. of Functions	Technology	Screening Level	Terminal Form	Control Technique	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Switcher Config	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Output Voltage	Control Mode	Minimum Operating Temperature	Terminal Finish	Maximum Output Voltage	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width (mm)	Qualification	Minimum Supply Voltage (Vsup)	Nominal Input Voltage	Additional Features	Minimum Input Voltage	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	No. of Outputs	Peak Reflow Temperature (C)	Length	Nominal Output Voltage	Maximum Input Voltage
UC3855ADWG4	Texas Instruments	POWER FACTOR CONTROLLER	COMMERCIAL	20	SOP	RECTANGULAR	YES	500 kHz	PLASTIC/EPOXY	17 mA	1.5 A	1	BIPOLAR		GULL WING	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE	SOP20,.4	Switching Regulator or Controllers	1.27 mm	70 Cel		CURRENT-MODE	0 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G20	2	20 V	2.65 mm	7.5 mm	Not Qualified		18 V		15 V	e4	30		260	12.8 mm		35 V
UC3855ANG4	Texas Instruments	POWER FACTOR CONTROLLER	COMMERCIAL	20	DIP	RECTANGULAR	NO	500 kHz	PLASTIC/EPOXY		1.5 A	1	BIPOLAR		THROUGH-HOLE	PULSE WIDTH MODULATION			BOOST	IN-LINE	DIP20,.3	Switching Regulator or Controllers	2.54 mm	70 Cel		CURRENT-MODE	0 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDIP-T20			5.08 mm	7.62 mm	Not Qualified		18 V		15 V	e4				25.4 mm		35 V
UC3855BDWG4	Texas Instruments	POWER FACTOR CONTROLLER	COMMERCIAL	20	SOP	RECTANGULAR	YES	500 kHz	PLASTIC/EPOXY	17 mA	1.5 A	1	BIPOLAR		GULL WING	PULSE WIDTH MODULATION	18 V		BOOST	SMALL OUTLINE	SOP20,.4	Switching Regulator or Controllers	1.27 mm	70 Cel	7.313 V	CURRENT-MODE	0 Cel	NICKEL PALLADIUM GOLD	7.688 V	DUAL	R-PDSO-G20	2	20 V	2.65 mm	7.5 mm	Not Qualified		18 V		15 V	e4	30		260	12.8 mm	7.5 V	20 V
UC3855BNG4	Texas Instruments	POWER FACTOR CONTROLLER	COMMERCIAL	20	DIP	RECTANGULAR	NO	500 kHz	PLASTIC/EPOXY	17 mA	1.5 A	1	BIPOLAR		THROUGH-HOLE	PULSE WIDTH MODULATION	18 V		BOOST	IN-LINE	DIP20,.3	Switching Regulator or Controllers	2.54 mm	70 Cel	7.313 V	CURRENT-MODE	0 Cel	NICKEL PALLADIUM GOLD	7.688 V	DUAL	R-PDIP-T20		20 V	5.08 mm	7.62 mm	Not Qualified		18 V		15 V	e4				25.4 mm	7.5 V	20 V
UC3875NG4	Texas Instruments	SWITCHING CONTROLLER	COMMERCIAL	20	DIP	RECTANGULAR	NO	2000 kHz	PLASTIC/EPOXY	30 mA	3 A	1	BIPOLAR		THROUGH-HOLE	RESONANT CONTROL	12 V		PUSH-PULL	IN-LINE	DIP20,.3	Switching Regulator or Controllers	2.54 mm	70 Cel	4.92 V	CURRENT/VOLTAGE-MODE	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5.08 V	DUAL	R-PDIP-T20			5.08 mm	7.62 mm	Not Qualified		12 V	CAN ALSO BE CONFIGURED IN CURRENT MODE; PWM CONTROL TECHNIQUE ALSO POSSIBLE	11 V	e4	NOT SPECIFIED		NOT SPECIFIED	25.4 mm	5 V	20 V
UC3909DWG4	Texas Instruments	BATTERY CHARGE CONTROLLER	COMMERCIAL	20	SOP	RECTANGULAR	YES	242 kHz	PLASTIC/EPOXY	19 mA	.1 A	1	BIPOLAR		GULL WING	PULSE WIDTH MODULATION	15 V	15	SINGLE	SMALL OUTLINE	SOP20,.4	Power Management Circuits	1.27 mm	70 Cel		CURRENT-MODE	0 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G20	2		2.64 mm	7.5 mm	Not Qualified		15 V		8.8 V	e4	30		260	10.365 mm		35 V
UCC28502DWG4	Texas Instruments	POWER FACTOR CONTROLLER WITH POST REGULATOR	INDUSTRIAL	20	SOP	RECTANGULAR	YES	120 kHz	PLASTIC/EPOXY		1.2 A	1	BICMOS		GULL WING	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE	SOP20,.4	Switching Regulator or Controllers	1.27 mm	85 Cel		CURRENT-MODE	-40 Cel			DUAL	R-PDSO-G20			2.65 mm	7.5 mm	Not Qualified		12 V	CAN ALSO BE PROGRAMMED FOR CURRENT MODE AND VOLTAGE MODE	10.3 V		NOT SPECIFIED		NOT SPECIFIED	12.8 mm		15 V
UCC28502DWTRG4	Texas Instruments	POWER FACTOR CONTROLLER WITH POST REGULATOR	INDUSTRIAL	20	SOP	RECTANGULAR	YES	120 kHz	PLASTIC/EPOXY		1.2 A	1	BICMOS		GULL WING	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE	SOP20,.4	Switching Regulator or Controllers	1.27 mm	85 Cel		CURRENT-MODE	-40 Cel			DUAL	R-PDSO-G20			2.65 mm	7.5 mm	Not Qualified		12 V	CAN ALSO BE PROGRAMMED FOR CURRENT MODE AND VOLTAGE MODE	10.3 V		NOT SPECIFIED		NOT SPECIFIED	12.8 mm		15 V
UCC2895DWG4	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	20	SOP	RECTANGULAR	YES	1000 kHz	PLASTIC/EPOXY	6 mA	.1 A	1	BICMOS		GULL WING	PULSE WIDTH MODULATION	12 V		PHASE-SHIFT	SMALL OUTLINE	SOP20,.4	Switching Regulator or Controllers	1.27 mm	85 Cel	4.94 V	CURRENT/VOLTAGE-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5.06 V	DUAL	R-PDSO-G20	2	16.5 V	2.65 mm	7.5 mm	Not Qualified	10 V	12 V	ALSO OPERATES IN CURRENT MODE	10 V	e4	NOT SPECIFIED		260	12.8 mm	5 V	16.5 V
UCC38503DWG4	Texas Instruments	POWER FACTOR CONTROLLER WITH POST REGULATOR	COMMERCIAL	20	SOP	RECTANGULAR	YES	120 kHz	PLASTIC/EPOXY	4 mA	1.2 A	1	BICMOS		GULL WING	PULSE WIDTH MODULATION	12 V		BOOST	SMALL OUTLINE	SOP20,.4	Switching Regulator or Controllers	1.27 mm	70 Cel		CURRENT-MODE	0 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G20	2	18 V	2.65 mm	7.5 mm	Not Qualified		12 V	CAN ALSO BE PROGRAMMED FOR CURRENT MODE AND VOLTAGE MODE	10.3 V	e4	30		260	12.8 mm		15 V
UCC3895DWG4	Texas Instruments	SWITCHING CONTROLLER	COMMERCIAL	20	SOP	RECTANGULAR	YES	1000 kHz	PLASTIC/EPOXY	6 mA	.1 A	1	BICMOS		GULL WING	PULSE WIDTH MODULATION	12 V		PHASE-SHIFT	SMALL OUTLINE	SOP20,.4	Switching Regulator or Controllers	1.27 mm	70 Cel	4.94 V	CURRENT-MODE	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5.06 V	DUAL	R-PDSO-G20	2	16.5 V	2.65 mm	7.5 mm	Not Qualified	10 V	12 V	ALSO OPERATES IN CURRENT MODE	10 V	e4	NOT SPECIFIED		260	12.8 mm	5 V	16.5 V
UCC3895NG4	Texas Instruments	SWITCHING CONTROLLER	COMMERCIAL	20	DIP	RECTANGULAR	NO	1000 kHz	PLASTIC/EPOXY	6 mA	.1 A	1	BICMOS		THROUGH-HOLE	PULSE WIDTH MODULATION	12 V		PHASE-SHIFT	IN-LINE	DIP20,.3	Switching Regulator or Controllers	2.54 mm	70 Cel	4.94 V	CURRENT-MODE	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5.06 V	DUAL	R-PDIP-T20		16.5 V	5.08 mm	7.62 mm	Not Qualified	10 V	12 V	ALSO OPERATES IN CURRENT MODE	10 V	e4	NOT SPECIFIED		NOT SPECIFIED	25.4 mm	5 V	16.5 V
UCC2541PWPG4	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	20	HTSSOP	RECTANGULAR	YES	330 kHz	PLASTIC/EPOXY		3.5 A	1	BIPOLAR		GULL WING	PULSE WIDTH MODULATION			SINGLE	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Switching Regulator or Controllers	.65 mm	105 Cel		VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G20	2		1.2 mm	4.4 mm	Not Qualified		12 V	AVERAGE CURRENT MODE OPERATION IS ALSO POSSIBLE	8.5 V	e4	30		260	6.5 mm		35 V
UCC28501DWG4	Texas Instruments	POWER FACTOR CONTROLLER WITH POST REGULATOR	INDUSTRIAL	20	SOP	RECTANGULAR	YES	120 kHz	PLASTIC/EPOXY	4 mA	1.2 A	1	BICMOS		GULL WING	PULSE WIDTH MODULATION	12 V		BOOST	SMALL OUTLINE	SOP20,.4	Switching Regulator or Controllers	1.27 mm	85 Cel		CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G20	2	18 V	2.65 mm	7.5 mm	Not Qualified		12 V	CAN ALSO BE PROGRAMMED FOR CURRENT MODE AND VOLTAGE MODE	10.3 V	e4	30		260	12.8 mm		15 V
UCC28512DWG4	Texas Instruments	POWER FACTOR CONTROLLER WITH POST REGULATOR	INDUSTRIAL	20	SOP	RECTANGULAR	YES	500 kHz	PLASTIC/EPOXY	4 mA	3.5 A	1	BICMOS		GULL WING	PULSE WIDTH MODULATION	12 V		BOOST	SMALL OUTLINE	SOP20,.4	Switching Regulator or Controllers	1.27 mm	105 Cel		CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G20	1	18 V	2.65 mm	7.49 mm	Not Qualified		12 V		10.8 V	e4	30		260	12.825 mm		18 V
TPS23750PWPRG4	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	20	TSSOP	RECTANGULAR	YES	565 kHz	PLASTIC/EPOXY	.85 mA	1.3 A	1			GULL WING	PULSE WIDTH MODULATION	48 V		SINGLE	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Switching Regulator or Controllers	.65 mm	85 Cel		CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G20	2		1.2 mm	4.4 mm	Not Qualified		48 V		0 V	e4	30		260	6.5 mm		67 V
TPS23750PWP	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	20	TSSOP	RECTANGULAR	YES	565 kHz	PLASTIC/EPOXY	.85 mA	1.3 A	1			GULL WING	PULSE WIDTH MODULATION	48 V		SINGLE	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Switching Regulator or Controllers	.65 mm	85 Cel		CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G20	2		1.2 mm	4.4 mm	Not Qualified		48 V		0 V	e4	30		260	6.5 mm		67 V
TPS61100PWG4	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	20	TSSOP	RECTANGULAR	YES	800 kHz	PLASTIC/EPOXY		1.8 A	1			GULL WING	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Switching Regulator or Controllers	.65 mm	85 Cel		CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G20	1		1.2 mm	4.4 mm	Not Qualified		1.8 V		.8 V	e4	30		260	6.5 mm		3.3 V
UCC28521DWRG4	Texas Instruments	POWER FACTOR CONTROLLER WITH POST REGULATOR	INDUSTRIAL	20	SOP	RECTANGULAR	YES	240 kHz	PLASTIC/EPOXY		3.5 A	1	BICMOS		GULL WING	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE	SOP20,.4	Switching Regulator or Controllers	1.27 mm	85 Cel		CURRENT-MODE	-40 Cel			DUAL	R-PDSO-G20			2.65 mm	7.5 mm	Not Qualified		12 V	PEAK CURRENT MODE ALSO AVAILABLE	10.6 V		NOT SPECIFIED		NOT SPECIFIED	12.8 mm		15 V
UC2861QG3	Texas Instruments	SWITCHING CONTROLLER	OTHER	20	QCCJ	SQUARE	YES	1000 kHz	PLASTIC/EPOXY		1.5 A	1	BIPOLAR		J BEND	RESONANT CONTROL			PUSH-PULL	CHIP CARRIER	LDCC20,.4SQ	Switching Regulator or Controllers	1.27 mm	85 Cel		VOLTAGE-MODE	-25 Cel	MATTE TIN		QUAD	S-PQCC-J20	2		4.57 mm	8.965 mm	Not Qualified		12 V		11.5 V	e3	30		260	8.965 mm		20 V
UC3854QG3	Texas Instruments	POWER FACTOR CONTROLLER	COMMERCIAL	20	QCCJ	SQUARE	YES	118 kHz	PLASTIC/EPOXY		1.5 A	1	BIPOLAR		J BEND	PULSE WIDTH MODULATION			BOOST	CHIP CARRIER	LDCC20,.4SQ	Switching Regulator or Controllers	1.27 mm	70 Cel		CURRENT-MODE	0 Cel	MATTE TIN		QUAD	S-PQCC-J20	2		4.57 mm	8.965 mm	Not Qualified		18 V		11 V	e3	30		260	8.965 mm		35 V
TPS60131PWPG4	Texas Instruments	SWITCHED CAPACITOR REGULATOR	INDUSTRIAL	20	HTSSOP	RECTANGULAR	YES	450 kHz	PLASTIC/EPOXY		.3 A	1			GULL WING				DOUBLER INVERTER	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Other Analog ICs	.65 mm	85 Cel	5 V		-40 Cel	NICKEL PALLADIUM GOLD	5 V	DUAL	R-PDSO-G20	2		1.2 mm	4.4 mm	Not Qualified		3 V		2.7 V	e4	30	1	260	6.5 mm	5 V	5.4 V
UC2526AQG3	Texas Instruments	SWITCHING CONTROLLER	OTHER	20	QCCJ	SQUARE	YES	550 kHz	PLASTIC/EPOXY		.2 A	1	CMOS		J BEND	PULSE WIDTH MODULATION			PUSH-PULL	CHIP CARRIER	LDCC20,.4SQ	Switching Regulator or Controllers	1.27 mm	85 Cel		VOLTAGE-MODE	-25 Cel	MATTE TIN		QUAD	S-PQCC-J20	2		4.57 mm	8.965 mm	Not Qualified		15 V		7 V	e3	30		260	8.965 mm	5 V	35 V
UC2825AQG3	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	20	QCCJ	SQUARE	YES	1150 kHz	PLASTIC/EPOXY		2.2 A	1	BIPOLAR		J BEND	PULSE WIDTH MODULATION			PUSH-PULL	CHIP CARRIER	LDCC20,.4SQ	Switching Regulator or Controllers	1.27 mm	85 Cel		VOLTAGE-MODE	-40 Cel	MATTE TIN		QUAD	S-PQCC-J20	2		4.57 mm	8.965 mm	Not Qualified		12 V	CAN ALSO BE CONFIGURED IN CURRENT MODE	8.8 V	e3	30		260	8.965 mm		20 V
UC3909NG4	Texas Instruments	BATTERY CHARGE CONTROLLER	COMMERCIAL	20	DIP	RECTANGULAR	NO	242 kHz	PLASTIC/EPOXY	19 mA	.1 A	1	BIPOLAR		THROUGH-HOLE	PULSE WIDTH MODULATION	15 V	15	SINGLE	IN-LINE	DIP20,.3	Power Management Circuits	2.54 mm	70 Cel		CURRENT-MODE	0 Cel			DUAL	R-PDIP-T20			5.08 mm	7.62 mm	Not Qualified		15 V		8.8 V		NOT SPECIFIED		NOT SPECIFIED	19.3 mm		35 V
UCC2897PWG4	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	20	TSSOP	RECTANGULAR	YES	270 kHz	PLASTIC/EPOXY	3 mA	2.5 A	1	BICMOS		GULL WING	PULSE WIDTH MODULATION	12 V		PUSH-PULL	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Switching Regulator or Controllers	.65 mm	105 Cel		VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G20	1		1.2 mm	4.4 mm	Not Qualified		12 V	CAN ALSO BE CONFIGURED IN CURRENT MODE	8.5 V	e4	30		260	6.5 mm		14.5 V
UC2825QG3	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	20	QCCJ	SQUARE	YES	1000 kHz	PLASTIC/EPOXY		2 A	1	BICMOS		J BEND	PULSE WIDTH MODULATION			PUSH-PULL	CHIP CARRIER	LDCC20,.4SQ	Switching Regulator or Controllers	1.27 mm	85 Cel		VOLTAGE-MODE	-40 Cel	MATTE TIN		QUAD	S-PQCC-J20	2		4.57 mm	8.965 mm	Not Qualified		15 V	CAN ALSO BE CONFIGURED IN CURRENT MODE	8.8 V	e3	30		260	8.965 mm		30 V
UC2825QTRG3	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	20	QCCJ	SQUARE	YES	1000 kHz	PLASTIC/EPOXY		2 A	1	BICMOS		J BEND	PULSE WIDTH MODULATION			PUSH-PULL	CHIP CARRIER	LDCC20,.4SQ	Switching Regulator or Controllers	1.27 mm	85 Cel		VOLTAGE-MODE	-40 Cel			QUAD	S-PQCC-J20			4.57 mm	8.965 mm	Not Qualified		15 V	CAN ALSO BE CONFIGURED IN CURRENT MODE	8.8 V		NOT SPECIFIED		NOT SPECIFIED	8.965 mm		30 V
UC3825QTRG3	Texas Instruments	SWITCHING CONTROLLER	COMMERCIAL	20	QCCJ	SQUARE	YES	1000 kHz	PLASTIC/EPOXY		2 A	1	BICMOS		J BEND	PULSE WIDTH MODULATION			PUSH-PULL	CHIP CARRIER	LDCC20,.4SQ	Switching Regulator or Controllers	1.27 mm	70 Cel		VOLTAGE-MODE	0 Cel	MATTE TIN		QUAD	S-PQCC-J20	2		4.57 mm	8.965 mm	Not Qualified		15 V	CAN ALSO BE CONFIGURED IN CURRENT MODE	8.8 V	e3	30		260	8.965 mm		30 V
UC3856QG3	Texas Instruments	SWITCHING CONTROLLER	COMMERCIAL	20	QCCJ	SQUARE	YES	230 kHz	PLASTIC/EPOXY		2 A	1	BIPOLAR		J BEND	PULSE WIDTH MODULATION			PUSH-PULL	CHIP CARRIER	LDCC20,.4SQ	Switching Regulator or Controllers	1.27 mm	70 Cel		CURRENT-MODE	0 Cel	MATTE TIN		QUAD	S-PQCC-J20	2		4.57 mm	8.965 mm	Not Qualified		15 V		8 V	e3	30		260	8.965 mm		40 V
UCC2806QG3	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	20	QCCJ	SQUARE	YES	1000 kHz	PLASTIC/EPOXY		.5 A	1	BICMOS		J BEND	PULSE WIDTH MODULATION			PUSH-PULL	CHIP CARRIER	LDCC20,.4SQ	Switching Regulator or Controllers	1.27 mm	85 Cel		CURRENT-MODE	-40 Cel	MATTE TIN		QUAD	S-PQCC-J20	2		4.57 mm	8.965 mm	Not Qualified		12 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 2.5V TO 15V	8 V	e3	30		260	8.965 mm		14.5 V
L6585DETR	STMicroelectronics	POWER FACTOR CONTROLLER	AUTOMOTIVE	20	SOP	RECTANGULAR	YES	250 kHz	PLASTIC/EPOXY			1	BCDMOS		GULL WING	PULSE WIDTH MODULATION	15 V	15	BOOST	SMALL OUTLINE	SOP20,.4	Switching Regulator or Controllers	1.27 mm	125 Cel		VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G20	3		2.65 mm	7.5 mm	Not Qualified		15 V	ALSO OPERATES IN CURRENT MODE	11 V	e4	30		260	12.8 mm		16 V
L6585DE	STMicroelectronics	POWER FACTOR CONTROLLER	AUTOMOTIVE	20	SOP	RECTANGULAR	YES	250 kHz	PLASTIC/EPOXY			1	BCDMOS		GULL WING	PULSE WIDTH MODULATION	15 V	15	BOOST	SMALL OUTLINE	SOP20,.4	Switching Regulator or Controllers	1.27 mm	125 Cel		VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G20	3		2.65 mm	7.5 mm	Not Qualified		15 V	ALSO OPERATES IN CURRENT MODE	11 V	e4	30		260	12.8 mm		16 V
TPS40075RHLT	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	20	HVQCCN	RECTANGULAR	YES	1000 kHz	PLASTIC/EPOXY		20 A	1			NO LEAD	PULSE WIDTH MODULATION			PUSH-PULL	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	.7 V	VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD	23 V	QUAD	R-PQCC-N20	2		1 mm	3.5 mm	Not Qualified		12 V		4.5 V	e4	30	1	260	4.5 mm	8 V	28 V
TPS60132PWPG4	Texas Instruments	SWITCHED CAPACITOR REGULATOR	INDUSTRIAL	20	HTSSOP	RECTANGULAR	YES	450 kHz	PLASTIC/EPOXY		.15 A	1			GULL WING				DOUBLER INVERTER	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Other Analog ICs	.65 mm	85 Cel	5 V		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5 V	DUAL	R-PDSO-G20	2		1.2 mm	4.4 mm	Not Qualified		3 V		2.7 V	e4	NOT SPECIFIED	1	260	6.5 mm	5 V	5.4 V
BD8301MUV-E2	ROHM	SWITCHING REGULATOR	OTHER	20	HVQCCN	SQUARE	YES	1200 kHz	UNSPECIFIED		1 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK-BOOST	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.16SQ,20	Switching Regulator or Controllers	.5 mm	85 Cel		VOLTAGE-MODE	-25 Cel			QUAD	S-XQCC-N20			1 mm	4 mm	Not Qualified		3.7 V	OUTPUT VOLTAGE FROM 2.8 TO 5.2V	2.5 V		NOT SPECIFIED		NOT SPECIFIED	4 mm		5.5 V
TPS54162QPWPRQ1	Texas Instruments	SWITCHING REGULATOR	AUTOMOTIVE	20	HTSSOP	RECTANGULAR	YES	2200 kHz	PLASTIC/EPOXY		1 A	1		AEC-Q100	GULL WING	HYSTERETIC CURRENT MODE			BUCK	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH			.65 mm	125 Cel	.9 V	VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD	18 V	DUAL	R-PDSO-G20	3		1.2 mm	4.4 mm	Not Qualified		12 V	ALSO ADJUSTABLE OUTPUT FROM 0.9 TO 18V; CURRENT MODE ALSO POSSIBLE	3.6 V	e4	30	1	260	6.5 mm		60 V
UC2854BQG3	Texas Instruments	POWER FACTOR CONTROLLER	INDUSTRIAL	20	QCCJ	SQUARE	YES	120 kHz	PLASTIC/EPOXY	18 mA	1.5 A	1	BIPOLAR		J BEND	PULSE WIDTH MODULATION	18 V	18	BOOST	CHIP CARRIER	LDCC20,.4SQ	Switching Regulator or Controllers	1.27 mm	85 Cel		CURRENT-MODE	-40 Cel	MATTE TIN		QUAD	S-PQCC-J20	2		4.57 mm	8.965 mm	Not Qualified		18 V		10 V	e3	30		260	8.965 mm		20 V
A8293SESTR-T	Allegro MicroSystems	SWITCHING REGULATOR	OTHER	20	HVQCCN	SQUARE	YES	384 kHz	UNSPECIFIED	19 mA		1	BCDMOS		NO LEAD			9/16	BOOST	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.16SQ,20	Power Management Circuits	.5 mm	85 Cel		CURRENT-MODE	-20 Cel	Matte Tin (Sn)		QUAD	S-XQCC-N20	2		.8 mm	4 mm	Not Qualified		10 V		9 V	e3	40		260	4 mm		16 V
UCC28250RGPT	Texas Instruments	SWITCHING CONTROLLER	AUTOMOTIVE	20	HVQCCN	SQUARE	YES	1150 kHz	PLASTIC/EPOXY	3.4 mA		1			NO LEAD	PULSE WIDTH MODULATION	12 V		PUSH-PULL	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.16SQ,20	Switching Regulator or Controllers	.5 mm	125 Cel	3.22 V	CURRENT/VOLTAGE-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	3.38 V	QUAD	S-PQCC-N20	2	17 V	1 mm	4 mm	Not Qualified	4.7 V	12 V		4.7 V	e4	NOT SPECIFIED		260	4 mm		17 V
SI3402-A-GM	Silicon Labs	SWITCHING REGULATOR	INDUSTRIAL	20	HVQCCN	SQUARE	YES	350 kHz	UNSPECIFIED		.68 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.2SQ,32	Power Management Circuits	.8 mm	85 Cel		CURRENT-MODE	-40 Cel			QUAD	S-XQCC-N20			.9 mm	5 mm	Not Qualified		5 V		4.5 V		NOT SPECIFIED		NOT SPECIFIED	5 mm	5 V	5.5 V
TPS60121PWPG4	Texas Instruments	SWITCHED CAPACITOR REGULATOR	INDUSTRIAL	20	HTSSOP	RECTANGULAR	YES	450 kHz	PLASTIC/EPOXY		.2 A	1			GULL WING				DOUBLER INVERTER	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Other Analog ICs	.65 mm	85 Cel	3.3 V		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	3.3 V	DUAL	R-PDSO-G20	2		1.2 mm	4.4 mm	Not Qualified		2 V		1.8 V	e4	NOT SPECIFIED	1	260	6.5 mm	3.3 V	3.6 V
MPQ8633AGL-Z	Monolithic Power Systems	SWITCHING REGULATOR		20	VQCCN	RECTANGULAR	YES	1150 kHz	UNSPECIFIED		12 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, VERY THIN PROFILE	LCC20(UNSPEC)			125 Cel	.6 V		-40 Cel		5.5 V	QUAD	R-XQCC-N20			1 mm	4 mm			12 V		4 V		NOT SPECIFIED		NOT SPECIFIED	5 mm		16 V
MPM3632CGQV-Z	Monolithic Power Systems	SWITCHING REGULATOR	AUTOMOTIVE	20	XMA	RECTANGULAR	YES	3300 kHz	UNSPECIFIED		3 A	1	HYBRID		NO LEAD	PULSE WIDTH MODULATION			BUCK	MICROELECTRONIC ASSEMBLY				125 Cel	.8 V		-40 Cel		5.5 V	UNSPECIFIED	R-XXMA-N20			1.65 mm	3 mm			12 V		4 V					5 mm		18 V
TPS61088QRHLTQ1	Texas Instruments	SWITCHING REGULATOR	AUTOMOTIVE	20	HQCCN	RECTANGULAR	YES	2200 kHz	PLASTIC/EPOXY		13 A	1			NO LEAD	PULSE WIDTH MODULATION			BOOST	CHIP CARRIER, HEAT SINK/SLUG			.5 mm	125 Cel	4.5 V		-40 Cel	NICKEL PALLADIUM GOLD	12.6 V	QUAD	R-PQCC-N20	2		1 mm	3.5 mm			3.6 V	ASLO WORKS IN PFM MODE; ADJUSTABLE OUTPUT VOLATGE RANGE 4.5 TO 12.6 V	2.7 V	e4	30	1	260	4.5 mm		12 V
MPQ2918GL-AEC1-Z	Monolithic Power Systems	SWITCHING CONTROLLER		20	HVQCCN	RECTANGULAR	YES	1000 kHz	UNSPECIFIED			1		AEC-Q100	NO LEAD	PULSE WIDTH MODULATION			BUCK	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.11X.15,20		.5 mm	125 Cel		CURRENT-MODE	-40 Cel	MATTE TIN	25 V	QUAD	R-XQCC-N20	1		1 mm	3 mm			24 V		4 V	e3			260	4 mm		40 V
NCP6356BWFCCT1G	Onsemi	SWITCHING REGULATOR	INDUSTRIAL	20	VFBGA	RECTANGULAR	YES	2640 kHz	PLASTIC/EPOXY	40 mA	5 A	1			BALL	PULSE WIDTH MODULATION			BUCK	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA20,4X5,16		.4 mm	85 Cel	.6 V	VOLTAGE-MODE	-40 Cel		1.4 V	BOTTOM	R-PBGA-B20			.6 mm	1.62 mm			3.6 V	PULSE FREQUENCY MODULATION TECHNIQUE ALSO AVAILABLE	2.5 V		NOT SPECIFIED		NOT SPECIFIED	2.02 mm	.8 V	5.5 V
ADP1050ACPZ-RL	Analog Devices	SWITCHING CONTROLLER	AUTOMOTIVE	20	HVQCCN	SQUARE	YES	625 kHz	UNSPECIFIED			1			NO LEAD	PULSE WIDTH MODULATION				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	125 Cel		VOLTAGE-MODE	-40 Cel	MATTE TIN		QUAD	S-XQCC-N20	3		.8 mm	4 mm			3.3 V		3 V	e3	30		260	4 mm		3.6 V

Switching Regulators & Controllers

Switching regulators and controllers are electronic devices used to regulate the output voltage and current of power supplies. They operate by rapidly switching a power supply circuit between on and off states, resulting in a high-frequency waveform that can be filtered and smoothed to produce a stable output voltage.

Switching regulators and controllers offer several advantages over traditional linear regulators, including higher efficiency and the ability to handle a wider range of input voltages. They are commonly used in applications such as power supplies for computers, LED lighting, and motor control.

Switching regulators and controllers come in a variety of forms, including step-up (boost), step-down (buck), and step-up/down (buck-boost) configurations. They may be designed as integrated circuits (ICs) or as standalone modules.

Switching regulators and controllers typically include feedback control circuits to adjust the output voltage and current, as well as protection circuits to prevent overvoltage, overcurrent, and overtemperature conditions. They may also include features such as soft-start to reduce inrush currents and synchronization with external clock signals.