BATTERY CHARGE CONTROLLER Switching Regulators & Controllers 57

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Maximum Switching Frequency	Package Body Material	Maximum Supply Current (Isup)	Maximum Output Current	No. of Functions	Technology	Terminal Form	Control Technique	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Switcher Config	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Output Voltage	Control Mode	Minimum Operating Temperature	Terminal Finish	Maximum Output Voltage	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width (mm)	Qualification	Minimum Supply Voltage (Vsup)	Nominal Input Voltage	Additional Features	Minimum Input Voltage	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	No. of Outputs	Peak Reflow Temperature (C)	Length	Nominal Output Voltage	Maximum Input Voltage
BQ24130RHLT	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	20	HVQCCN	RECTANGULAR	YES	700 kHz	PLASTIC/EPOXY		4 A	1		NO LEAD	PULSE WIDTH MODULATION		4.5/17	BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20/24,.14X.18,20	Power Management Circuits	.5 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	13.5 V	QUAD	R-PQCC-N20	2	17 V	1 mm	3.5 mm	Not Qualified	4.5 V			4.5 V	e4	NOT SPECIFIED		260	4.5 mm	6 V	17 V
LM3209TLE-G3/NOPB	Texas Instruments	BATTERY CHARGE CONTROLLER	OTHER	12	VFBGA	RECTANGULAR	YES	2700 kHz	PLASTIC/EPOXY		1 A	1		BALL	PULSE WIDTH MODULATION			BUCK-BOOST	GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.5 mm	85 Cel	.6 V	CURRENT-MODE	-30 Cel	TIN SILVER COPPER	4.2 V	BOTTOM	R-PBGA-B12	1		.675 mm	1.9915 mm			3.6 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 4.2V	2.7 V	e1	30	1	260	2.499 mm		5.5 V
LM3209TLX-G3/NOPB	Texas Instruments	BATTERY CHARGE CONTROLLER	OTHER	12	VFBGA	RECTANGULAR	YES	2700 kHz	PLASTIC/EPOXY		1 A	1		BALL	PULSE WIDTH MODULATION			BUCK-BOOST	GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.5 mm	85 Cel	.6 V	CURRENT-MODE	-30 Cel	TIN SILVER COPPER	4.2 V	BOTTOM	R-PBGA-B12	1		.675 mm	1.9915 mm			3.6 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 4.2V	2.7 V	e1	30	1	260	2.499 mm		5.5 V
LM3262TME/NOPB	Texas Instruments	BATTERY CHARGE CONTROLLER	OTHER	9	VFBGA	RECTANGULAR	YES	6300 kHz	PLASTIC/EPOXY		1 A	1		BALL	PULSE WIDTH MODULATION			BUCK	GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.4 mm	90 Cel	.4 V	VOLTAGE-MODE	-30 Cel	TIN SILVER COPPER	3.6 V	BOTTOM	R-PBGA-B9	1		.675 mm	1.355 mm			3.6 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 0.4 TO 3.3V	2.5 V	e1	30	1	260	1.48 mm		5.5 V
LM3269TLE/NOPB	Texas Instruments	BATTERY CHARGE CONTROLLER	OTHER	12	VFBGA	RECTANGULAR	YES	2700 kHz	PLASTIC/EPOXY		.75 A	1		BALL	PULSE WIDTH MODULATION			BUCK-BOOST	GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.5 mm	85 Cel	.6 V	CURRENT-MODE	-30 Cel	TIN SILVER COPPER	4.2 V	BOTTOM	R-PBGA-B12	1		.675 mm	1.9915 mm			3.6 V	ALSO OPERATES IN PFM CONTROL TECHNIQUE; ADJUSTABLE OUTPUT MODE FROM 0.6 TO 4.2V	2.7 V	e1	30	1	260	2.499 mm		5.5 V
LM3269TLX/NOPB	Texas Instruments	BATTERY CHARGE CONTROLLER	OTHER	12	VFBGA	RECTANGULAR	YES	2700 kHz	PLASTIC/EPOXY		.75 A	1		BALL	PULSE WIDTH MODULATION			BUCK-BOOST	GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.5 mm	85 Cel	.6 V	CURRENT-MODE	-30 Cel	TIN SILVER COPPER	4.2 V	BOTTOM	R-PBGA-B12	1		.675 mm	1.9915 mm			3.6 V	ALSO OPERATES IN PFM CONTROL TECHNIQUE; ADJUSTABLE OUTPUT MODE FROM 0.6 TO 4.2V	2.7 V	e1	30	1	260	2.499 mm		5.5 V
LM3248TME/NOPB	Texas Instruments	BATTERY CHARGE CONTROLLER	OTHER		VFBGA	RECTANGULAR	YES	2700 kHz	UNSPECIFIED		2.5 A	1		BALL	PULSE WIDTH MODULATION				GRID ARRAY, VERY THIN PROFILE, FINE PITCH				90 Cel	.4 V	CURRENT-MODE	-30 Cel	TIN SILVER COPPER	4 V	BOTTOM	R-XBGA-B30	1		.675 mm						2.7 V	e1	30	1	260			5.5 V
LM3248TMX/NOPB	Texas Instruments	BATTERY CHARGE CONTROLLER	OTHER		VFBGA	RECTANGULAR	YES	2700 kHz	UNSPECIFIED		2.5 A	1		BALL	PULSE WIDTH MODULATION				GRID ARRAY, VERY THIN PROFILE, FINE PITCH				90 Cel	.4 V	CURRENT-MODE	-30 Cel	TIN SILVER COPPER	4 V	BOTTOM	R-XBGA-B30	1		.675 mm						2.7 V	e1	30	1	260			5.5 V
TPS61280YFFT	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	VFBGA	SQUARE	YES	2300 kHz	UNSPECIFIED			1		BALL	PULSE WIDTH MODULATION			BOOST	GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.4 mm	85 Cel	2.85 V	CURRENT-MODE	-40 Cel	TIN SILVER COPPER	4.4 V	BOTTOM	S-XBGA-B16	1		.625 mm	1.666 mm			3.2 V	ALSO OPERATES IN PFM CONTROL TECHNIQUE	2.3 V	e1	30	1	260	1.666 mm	3.4 V	4.85 V
TPS61281YFFT	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	VFBGA	SQUARE	YES	2300 kHz	UNSPECIFIED			1		BALL	PULSE WIDTH MODULATION			BOOST	GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.4 mm	85 Cel	2.85 V	CURRENT-MODE	-40 Cel	TIN SILVER COPPER	4.4 V	BOTTOM	S-XBGA-B16	1		.625 mm	1.666 mm			3.2 V	ALSO OPERATES IN PFM CONTROL TECHNIQUE	2.3 V	e1	30	1	260	1.666 mm	3.4 V	4.85 V
TPS61282YFFR	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	VFBGA	SQUARE	YES	2300 kHz	UNSPECIFIED			1		BALL	PULSE WIDTH MODULATION			BOOST	GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.4 mm	85 Cel	2.85 V	CURRENT-MODE	-40 Cel	TIN SILVER COPPER	4.4 V	BOTTOM	S-XBGA-B16	1		.625 mm	1.666 mm			3.2 V	ALSO OPERATES IN PFM CONTROL TECHNIQUE	2.3 V	e1	30	1	260	1.666 mm	3.4 V	4.85 V
TPS61282YFFT	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	VFBGA	SQUARE	YES	2300 kHz	UNSPECIFIED			1		BALL	PULSE WIDTH MODULATION			BOOST	GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.4 mm	85 Cel	2.85 V	CURRENT-MODE	-40 Cel	TIN SILVER COPPER	4.4 V	BOTTOM	S-XBGA-B16	1		.625 mm	1.666 mm			3.2 V	ALSO OPERATES IN PFM CONTROL TECHNIQUE	2.3 V	e1	30	1	260	1.666 mm	3.4 V	4.85 V
MAX712CPE	Maxim Integrated	BATTERY CHARGE CONTROLLER	COMMERCIAL	16	DIP	RECTANGULAR	NO		PLASTIC/EPOXY	10 mA	.1 A	1	CMOS	THROUGH-HOLE		5 V	5	SINGLE	IN-LINE	DIP16,.3	Power Management Circuits	2.54 mm	70 Cel		CURRENT-MODE	0 Cel	TIN LEAD		DUAL	R-PDIP-T16	1		4.572 mm	7.62 mm	Not Qualified		5 V		4.5 V	e0				19.175 mm		5.5 V
MAX713CPE	Maxim Integrated	BATTERY CHARGE CONTROLLER	COMMERCIAL	16	DIP	RECTANGULAR	NO		PLASTIC/EPOXY	10 mA	.1 A	1	CMOS	THROUGH-HOLE		5 V	5	SINGLE	IN-LINE	DIP16,.3	Power Management Circuits	2.54 mm	70 Cel		CURRENT-MODE	0 Cel	TIN LEAD		DUAL	R-PDIP-T16	1		4.572 mm	7.62 mm	Not Qualified		5 V		4.5 V	e0				19.175 mm		5.5 V
MAX713EPE	Maxim Integrated	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	DIP	RECTANGULAR	NO		PLASTIC/EPOXY	10 mA	.1 A	1	CMOS	THROUGH-HOLE		5 V	5	SINGLE	IN-LINE	DIP16,.3	Power Management Circuits	2.54 mm	85 Cel		CURRENT-MODE	-40 Cel	TIN LEAD		DUAL	R-PDIP-T16	1		4.572 mm	7.62 mm	Not Qualified		5 V		4.5 V	e0			245	19.175 mm		5.5 V
MAX712CSE	Maxim Integrated	BATTERY CHARGE CONTROLLER	COMMERCIAL	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	10 mA	.1 A	1	CMOS	GULL WING		5 V	5	SINGLE	SMALL OUTLINE	SOP16,.25	Power Management Circuits	1.27 mm	70 Cel		CURRENT-MODE	0 Cel	TIN LEAD		DUAL	R-PDSO-G16	1		1.75 mm	3.9 mm	Not Qualified		5 V		4.5 V	e0			245	9.9 mm		5.5 V
MAX712ESE	Maxim Integrated	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	10 mA	.1 A	1	CMOS	GULL WING		5 V	5	SINGLE	SMALL OUTLINE	SOP16,.25	Power Management Circuits	1.27 mm	85 Cel		CURRENT-MODE	-40 Cel	TIN LEAD		DUAL	R-PDSO-G16	1		1.75 mm	3.9 mm	Not Qualified		5 V		4.5 V	e0				9.9 mm		5.5 V
MAX713CSE	Maxim Integrated	BATTERY CHARGE CONTROLLER	COMMERCIAL	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	10 mA	.1 A	1	CMOS	GULL WING		5 V	5	SINGLE	SMALL OUTLINE	SOP16,.25	Power Management Circuits	1.27 mm	70 Cel		CURRENT-MODE	0 Cel	TIN LEAD		DUAL	R-PDSO-G16	1		1.75 mm	3.9 mm	Not Qualified		5 V		4.5 V	e0			245	9.9 mm		5.5 V
MAX713ESE	Maxim Integrated	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	10 mA	.1 A	1	CMOS	GULL WING		5 V	5	SINGLE	SMALL OUTLINE	SOP16,.25	Power Management Circuits	1.27 mm	85 Cel		CURRENT-MODE	-40 Cel	TIN LEAD		DUAL	R-PDSO-G16	1		1.75 mm	3.9 mm	Not Qualified		5 V		4.5 V	e0			245	9.9 mm		5.5 V
TPS61122PWG4	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	600 kHz	PLASTIC/EPOXY		1.6 A	1		GULL WING	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Switching Regulator or Controllers	.65 mm	85 Cel	3.6 V	CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD	3.6 V	DUAL	R-PDSO-G16	1		1.2 mm	4.4 mm	Not Qualified		3.3 V		1.8 V	e4	30	2	260	5 mm	3.6 V	5.5 V
TPS61200DRCTG4	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	10	HVSON	SQUARE	YES	1650 kHz	PLASTIC/EPOXY		1.5 A	1		NO LEAD	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.12,20	Switching Regulator or Controllers	.5 mm	85 Cel	1.8 V	CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD	5.5 V	DUAL	S-PDSO-N10	2		1 mm	3 mm	Not Qualified		1.2 V	ALSO HAS ADJUSTABLE OUTPUT VOLTAGE FROM 1.8V TO 5.5V	.3 V	e4	30		260	3 mm		5.5 V
BQ24747RHDR	Texas Instruments	BATTERY CHARGE CONTROLLER	AUTOMOTIVE	28	HVQCCN	SQUARE	YES	360 kHz	PLASTIC/EPOXY			1		NO LEAD	PULSE WIDTH MODULATION		7/24	PUSH-PULL	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.2SQ,20	Power Management Circuits	.5 mm	125 Cel		VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N28	2		1 mm	5 mm	Not Qualified		20 V		7 V	e4	30		260	5 mm	3.3 V	24 V
NCP5080MUTXG	Onsemi	BATTERY CHARGE CONTROLLER	INDUSTRIAL	12	HVSON	SQUARE	YES	600 kHz	UNSPECIFIED		1.5 A	1		NO LEAD				SINGLE	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	S-XDSO-N12			.6 mm	3 mm	Not Qualified		3.6 V		2.7 V	e4	40		260	3 mm		5.5 V
TPS65530RSLT	Texas Instruments	BATTERY CHARGE CONTROLLER	OTHER	48	HQCCN	SQUARE	YES	1650 kHz	PLASTIC/EPOXY	30 mA	.6 A	1		NO LEAD	PULSE WIDTH MODULATION		1.8/5,3/5	BUCK-BOOST	CHIP CARRIER, HEAT SINK/SLUG	LCC48,.24SQ,16	Power Management Circuits	.4 mm	85 Cel		VOLTAGE-MODE	-25 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N48	2				Not Qualified		3.6 V	ALSO OPERATES IN CURRENT MODE AVERAGE CURRENT MODE AND PFM TECHNIQUE ALSO POSSIBLE	1.5 V	e4	30		260			5.5 V
TPS61202DSCTG4	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	10	HVSON	SQUARE	YES	1650 kHz	PLASTIC/EPOXY		1.5 A	1		NO LEAD	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.12,20	Switching Regulator or Controllers	.5 mm	85 Cel	5 V	CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5 V	DUAL	S-PDSO-N10	2		1 mm	3 mm	Not Qualified		1.2 V		.3 V	e4	NOT SPECIFIED	1	260	3 mm	5 V	5.5 V
MAX712CSE-T	Maxim Integrated	BATTERY CHARGE CONTROLLER	COMMERCIAL	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	10 mA	.1 A	1	CMOS	GULL WING		5 V	5	SINGLE	SMALL OUTLINE	SOP16,.25	Power Management Circuits	1.27 mm	70 Cel		CURRENT-MODE	0 Cel	TIN LEAD		DUAL	R-PDSO-G16			1.75 mm	3.9 mm	Not Qualified		5 V		4.5 V	e0				9.9 mm		5.5 V
NCP1800DM41R2	Onsemi	BATTERY CHARGE CONTROLLER	OTHER	8	TSSOP	SQUARE	YES		PLASTIC/EPOXY	.25 mA	.02 A	1		GULL WING			2.5/16	SINGLE	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Power Management Circuits	.65 mm	85 Cel		CURRENT-MODE	-20 Cel	TIN LEAD		DUAL	S-PDSO-G8			1.1 mm	3 mm	Not Qualified		6 V		2.5 V	e0			235	3 mm		16 V
TPS61120PWR	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	600 kHz	PLASTIC/EPOXY		1.6 A	1		GULL WING	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Switching Regulator or Controllers	.65 mm	85 Cel	2.5 V	CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5.5 V	DUAL	R-PDSO-G16	1		1.2 mm	4.4 mm	Not Qualified		3.3 V		1.8 V	e4	NOT SPECIFIED	2	260	5 mm		5.5 V
TPS61130PWR	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	600 kHz	PLASTIC/EPOXY		1.6 A	1		GULL WING	PULSE WIDTH MODULATION			BUCK-BOOST	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Switching Regulator or Controllers	.65 mm	85 Cel	2.5 V	CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5.5 V	DUAL	R-PDSO-G16	1		1.2 mm	4.4 mm	Not Qualified			ALSO OPERATES IN ADJUSTABLE MODE FROM 2.5V TO 5.5V	1.8 V	e4	NOT SPECIFIED	2	260	5 mm		6.5 V
TPS61032PWP	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	HTSSOP	RECTANGULAR	YES	700 kHz	PLASTIC/EPOXY		4.5 A	1		GULL WING	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Switching Regulator or Controllers	.65 mm	85 Cel	5 V	CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD	5 V	DUAL	R-PDSO-G16	2		1.2 mm	4.4 mm	Not Qualified		2.4 V		1.8 V	e4	30	1	260	5 mm	5 V	5.5 V
TPS61030RSAR	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	HVQCCN	SQUARE	YES	700 kHz	PLASTIC/EPOXY		4.5 A	1		NO LEAD	PULSE WIDTH MODULATION			BOOST	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Switching Regulator or Controllers	.65 mm	85 Cel	1.8 V	CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD	5.5 V	QUAD	S-PQCC-N16	2		1 mm	4 mm	Not Qualified		2.4 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 1.8V TO 5.5V	1.8 V	e4	30	1	260	4 mm		5.5 V
TPS61031RSAR	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	HVQCCN	SQUARE	YES	700 kHz	PLASTIC/EPOXY		4.5 A	1		NO LEAD	PULSE WIDTH MODULATION			BOOST	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Switching Regulator or Controllers	.65 mm	85 Cel	3.3 V	CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD	3.3 V	QUAD	S-PQCC-N16	2		1 mm	4 mm	Not Qualified		2.4 V		1.8 V	e4	30	1	260	4 mm	3.3 V	5.5 V
TPS61121RSAR	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	HVQCCN	SQUARE	YES	600 kHz	PLASTIC/EPOXY		1.6 A	1		NO LEAD	PULSE WIDTH MODULATION			BOOST	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Switching Regulator or Controllers	.65 mm	85 Cel		CURRENT-MODE	-40 Cel			QUAD	S-PQCC-N16			1 mm	4 mm	Not Qualified		3.3 V		1.8 V		NOT SPECIFIED		NOT SPECIFIED	4 mm		5.5 V
MAX712ESE-T	Maxim Integrated	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	10 mA	.1 A	1	CMOS	GULL WING		5 V	5	SINGLE	SMALL OUTLINE	SOP16,.25	Power Management Circuits	1.27 mm	85 Cel		CURRENT-MODE	-40 Cel	TIN LEAD		DUAL	R-PDSO-G16			1.75 mm	3.9 mm	Not Qualified		5 V		4.5 V	e0				9.9 mm		5.5 V
MAX713CSE-T	Maxim Integrated	BATTERY CHARGE CONTROLLER	COMMERCIAL	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	10 mA	.1 A	1	CMOS	GULL WING		5 V	5	SINGLE	SMALL OUTLINE	SOP16,.25	Power Management Circuits	1.27 mm	70 Cel		CURRENT-MODE	0 Cel	TIN LEAD		DUAL	R-PDSO-G16	1		1.75 mm	3.9 mm	Not Qualified		5 V		4.5 V	e0			245	9.9 mm		5.5 V
TPS61030PWPRG4	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	HTSSOP	RECTANGULAR	YES	700 kHz	PLASTIC/EPOXY		4.5 A	1		GULL WING	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Switching Regulator or Controllers	.65 mm	85 Cel	1.8 V	CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD	5.5 V	DUAL	R-PDSO-G16	2		1.2 mm	4.4 mm	Not Qualified		2.4 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 1.8V TO 5.5V	1.8 V	e4	30	1	260	5 mm		5.5 V
TPS61031PWPRG4	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	HTSSOP	RECTANGULAR	YES	700 kHz	PLASTIC/EPOXY		4.5 A	1		GULL WING	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Switching Regulator or Controllers	.65 mm	85 Cel	3.3 V	CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	3.3 V	DUAL	R-PDSO-G16	2		1.2 mm	4.4 mm	Not Qualified		2.4 V		1.8 V	e4	NOT SPECIFIED	1	260	5 mm	3.3 V	5.5 V
TPS61032PWPG4	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	HTSSOP	RECTANGULAR	YES	700 kHz	PLASTIC/EPOXY		4.5 A	1		GULL WING	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Switching Regulator or Controllers	.65 mm	85 Cel		CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G16	2		1.2 mm	4.4 mm	Not Qualified		2.4 V		1.8 V	e4	30		260	5 mm	5 V	5.5 V
TPS61120RSARG4	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	HVQCCN	SQUARE	YES	600 kHz	PLASTIC/EPOXY		1.6 A	1		NO LEAD	PULSE WIDTH MODULATION			BOOST	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Switching Regulator or Controllers	.65 mm	85 Cel	2.5 V	CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD	5.5 V	QUAD	S-PQCC-N16	2		1 mm	4 mm	Not Qualified		3.3 V		1.8 V	e4	30	2	260	4 mm		5.5 V
NCP1800DM42R2G	Onsemi	BATTERY CHARGE CONTROLLER	OTHER	8	TSSOP	SQUARE	YES		PLASTIC/EPOXY	.25 mA	.02 A	1		GULL WING			2.5/16	SINGLE	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Power Management Circuits	.65 mm	85 Cel		CURRENT-MODE	-20 Cel	TIN		DUAL	S-PDSO-G8			1.1 mm	3 mm	Not Qualified		6 V		2.5 V	e3			260	3 mm		16 V
TPS61121PWRG4	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	600 kHz	PLASTIC/EPOXY		1.6 A	1		GULL WING	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Switching Regulator or Controllers	.65 mm	85 Cel		CURRENT-MODE	-40 Cel			DUAL	R-PDSO-G16			1.2 mm	4.4 mm	Not Qualified		3.3 V		1.8 V		NOT SPECIFIED		NOT SPECIFIED	5 mm		5.5 V
TPS61090RSARG4	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	HVQCCN	SQUARE	YES	700 kHz	PLASTIC/EPOXY		2.5 A	1		NO LEAD	PULSE WIDTH MODULATION			BOOST	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Switching Regulator or Controllers	.65 mm	85 Cel	1.8 V	CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5.5 V	QUAD	S-PQCC-N16	2		1 mm	4 mm	Not Qualified				1.8 V	e4	NOT SPECIFIED	1	260	4 mm		5.5 V
TPS61130PWRG4	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	600 kHz	PLASTIC/EPOXY		1.6 A	1		GULL WING	PULSE WIDTH MODULATION			BUCK-BOOST	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Switching Regulator or Controllers	.65 mm	85 Cel	2.5 V	CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5.5 V	DUAL	R-PDSO-G16	1		1.2 mm	4.4 mm	Not Qualified			ALSO OPERATES IN ADJUSTABLE MODE FROM 2.5V TO 5.5V	1.8 V	e4	NOT SPECIFIED	2	260	5 mm		6.5 V
UC2909DWTRG4	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	20	SOP	RECTANGULAR	YES	242 kHz	PLASTIC/EPOXY	19 mA	.1 A	1	BIPOLAR	GULL WING	PULSE WIDTH MODULATION	15 V	15	SINGLE	SMALL OUTLINE	SOP20,.4	Power Management Circuits	1.27 mm	85 Cel		CURRENT-MODE	-40 Cel			DUAL	R-PDSO-G20			2.65 mm	7.5 mm	Not Qualified		15 V		8.8 V		NOT SPECIFIED		NOT SPECIFIED	12.8 mm		35 V
UC3909DWG4	Texas Instruments	BATTERY CHARGE CONTROLLER	COMMERCIAL	20	SOP	RECTANGULAR	YES	242 kHz	PLASTIC/EPOXY	19 mA	.1 A	1	BIPOLAR	GULL WING	PULSE WIDTH MODULATION	15 V	15	SINGLE	SMALL OUTLINE	SOP20,.4	Power Management Circuits	1.27 mm	70 Cel		CURRENT-MODE	0 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G20	2		2.64 mm	7.5 mm	Not Qualified		15 V		8.8 V	e4	30		260	10.365 mm		35 V
UC3909NG4	Texas Instruments	BATTERY CHARGE CONTROLLER	COMMERCIAL	20	DIP	RECTANGULAR	NO	242 kHz	PLASTIC/EPOXY	19 mA	.1 A	1	BIPOLAR	THROUGH-HOLE	PULSE WIDTH MODULATION	15 V	15	SINGLE	IN-LINE	DIP20,.3	Power Management Circuits	2.54 mm	70 Cel		CURRENT-MODE	0 Cel			DUAL	R-PDIP-T20			5.08 mm	7.62 mm	Not Qualified		15 V		8.8 V		NOT SPECIFIED		NOT SPECIFIED	19.3 mm		35 V
TPS61071DDCRG4	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	6	VSSOP	RECTANGULAR	YES	1440 kHz	PLASTIC/EPOXY		.7 A	1		GULL WING	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSOP6,.11,37	Switching Regulator or Controllers	.95 mm	85 Cel	1.8 V	VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD	5.5 V	DUAL	R-PDSO-G6	1		1 mm	1.6 mm	Not Qualified		1.2 V		.9 V	e4	30	1	260	2.9 mm		5.5 V
TPS61120PWG4	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	600 kHz	PLASTIC/EPOXY		1.6 A	1		GULL WING	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Switching Regulator or Controllers	.65 mm	85 Cel	2.5 V	CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5.5 V	DUAL	R-PDSO-G16	1		1.2 mm	4.4 mm	Not Qualified		3.3 V		1.8 V	e4	NOT SPECIFIED	2	260	5 mm		5.5 V

Switching Regulators & Controllers

Switching regulators and controllers are electronic devices used to regulate the output voltage and current of power supplies. They operate by rapidly switching a power supply circuit between on and off states, resulting in a high-frequency waveform that can be filtered and smoothed to produce a stable output voltage.

Switching regulators and controllers offer several advantages over traditional linear regulators, including higher efficiency and the ability to handle a wider range of input voltages. They are commonly used in applications such as power supplies for computers, LED lighting, and motor control.

Switching regulators and controllers come in a variety of forms, including step-up (boost), step-down (buck), and step-up/down (buck-boost) configurations. They may be designed as integrated circuits (ICs) or as standalone modules.

Switching regulators and controllers typically include feedback control circuits to adjust the output voltage and current, as well as protection circuits to prevent overvoltage, overcurrent, and overtemperature conditions. They may also include features such as soft-start to reduce inrush currents and synchronization with external clock signals.