DUAL SWITCHING CONTROLLER Switching Regulators & Controllers 263

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Maximum Switching Frequency	Package Body Material	Maximum Supply Current (Isup)	Maximum Output Current	No. of Functions	Technology	Screening Level	Terminal Form	Control Technique	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Switcher Config	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Output Voltage	Control Mode	Minimum Operating Temperature	Terminal Finish	Maximum Output Voltage	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width (mm)	Qualification	Minimum Supply Voltage (Vsup)	Nominal Input Voltage	Additional Features	Minimum Input Voltage	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	No. of Outputs	Peak Reflow Temperature (C)	Length	Nominal Output Voltage	Maximum Input Voltage
TPS43330QDAPRQ1	Texas Instruments	DUAL SWITCHING CONTROLLER	AUTOMOTIVE	38	HTSSOP	RECTANGULAR	YES	600 kHz	PLASTIC/EPOXY		.4 A	1		AEC-Q100	GULL WING	PULSE WIDTH MODULATION			PHASE-SHIFT	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP38,.32	Switching Regulator or Controllers	.65 mm	125 Cel		VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G38	3		1.2 mm	6.1 mm	Not Qualified		13 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 0.9 TO 11V; ALSO HAS CONTROL MODE OF IPK	4 V	e4	30		260	12.5 mm		40 V
TPS43332QDAPRQ1	Texas Instruments	DUAL SWITCHING CONTROLLER	AUTOMOTIVE	38	HTSSOP	RECTANGULAR	YES	600 kHz	PLASTIC/EPOXY		6 A	1		AEC-Q100	GULL WING	PULSE WIDTH MODULATION			PHASE-SHIFT	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP38,.32	Switching Regulator or Controllers	.65 mm	125 Cel	.9 V	VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD	11 V	DUAL	R-PDSO-G38	3		1.2 mm	6.1 mm	Not Qualified		13 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 0.9 TO 11V; ALSO HAS CONTROL MODE OF IPK	2 V	e4	30	3	260	12.5 mm		40 V
TPS40422RHAT	Texas Instruments	DUAL SWITCHING CONTROLLER	AUTOMOTIVE	40	HVQCCN	SQUARE	YES	1000 kHz	UNSPECIFIED		60 A	1			NO LEAD	PULSE WIDTH MODULATION			PHASE-SHIFT	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	125 Cel	.6 V	VOLTAGE-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5.6 V	QUAD	S-XQCC-N40	3		1 mm	6 mm			12 V	OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 5.6V; 6.5 VOLT OUTPUT ALSO AVAILABLE	4.5 V	e4	NOT SPECIFIED	2	260	6 mm	3.3 V	20 V
ST2S08BPQR	STMicroelectronics	DUAL SWITCHING CONTROLLER		12	HVQCCN	SQUARE	YES	1800 kHz	UNSPECIFIED		1.5 A	1			NO LEAD	PULSE WIDTH MODULATION			PHASE-SHIFT	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC12,.16SQ,32	Switching Regulator or Controllers	.8 mm			CURRENT-MODE		MATTE TIN		QUAD	S-XQCC-N12	1		1 mm	4 mm	Not Qualified		5 V	ADJUSTABLE OUTPUT VOLTAGE FROM 0.8V TO 10.175V	3 V	e3	40		260	4 mm		5.5 V
TPS43350QDAPRQ1	Texas Instruments	DUAL SWITCHING CONTROLLER	AUTOMOTIVE	38	HTSSOP	RECTANGULAR	YES	600 kHz	PLASTIC/EPOXY		6 A	1		AEC-Q100	GULL WING	PULSE WIDTH MODULATION			PHASE-SHIFT	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP38,.32	Switching Regulator or Controllers	.65 mm	125 Cel	.9 V	CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD	11 V	DUAL	R-PDSO-G38	3		1.2 mm	6.1 mm	Not Qualified		13 V	OPERATES IN ADJUSTABLE MODE FROM 0.9 TO 11V, ALSO HAS CONTROL TECHNIQUE OF PFM	4 V	e4	30	2	260	12.5 mm	5.8 V	40 V
TPS54294PWP	Texas Instruments	DUAL SWITCHING CONTROLLER	INDUSTRIAL	16	HTSSOP	RECTANGULAR	YES	700 kHz	PLASTIC/EPOXY	2.5 mA	2 A	1			GULL WING	PULSE WIDTH MODULATION	12 V		PHASE-SHIFT	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Switching Regulator or Controllers	.65 mm	85 Cel	.76 V	VOLTAGE-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	7 V	DUAL	R-PDSO-G16	2		1.2 mm	4.4 mm	Not Qualified		12 V	OPERATES IN ADJUSTABLE MODE FROM 0.76 TO 7V	4.5 V	e4	NOT SPECIFIED	2	260	5 mm	5.5 V	18 V
TPS54295PWP	Texas Instruments	DUAL SWITCHING CONTROLLER	INDUSTRIAL	16	HTSSOP	RECTANGULAR	YES	700 kHz	PLASTIC/EPOXY	2 mA	2 A	1			GULL WING	PULSE WIDTH MODULATION	12 V		PHASE-SHIFT	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Switching Regulator or Controllers	.65 mm	85 Cel	.76 V	VOLTAGE-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	7 V	DUAL	R-PDSO-G16	2		1.2 mm	4.4 mm	Not Qualified		12 V	OPERATES IN ADJUSTABLE MODE FROM 0.76 TO 7V	4.5 V	e4	NOT SPECIFIED	2	260	5 mm	5.5 V	18 V
ADP1876ACPZ-R7	Analog Devices	DUAL SWITCHING CONTROLLER	INDUSTRIAL	32	HVQCCN	SQUARE	YES	690 kHz	UNSPECIFIED			1			NO LEAD	PULSE WIDTH MODULATION			PHASE-SHIFT	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Switching Regulator or Controllers	.5 mm	85 Cel		CURRENT-MODE	-40 Cel	MATTE TIN		QUAD	S-XQCC-N32	3		.8 mm	5 mm	Not Qualified		12 V	LSO OPERATES AS LDO REGULATOR, OPERTAES IN ADJUSTABLE MODE FROM 0.6 TO 18 V	2.75 V	e3	30		260	5 mm	5 V	20 V
UCC28220QDRQ1	Texas Instruments	DUAL SWITCHING CONTROLLER	AUTOMOTIVE	16	SOP	RECTANGULAR	YES	1100 kHz	PLASTIC/EPOXY	6 mA	.1 A	1	BICMOS		GULL WING	PULSE WIDTH MODULATION	12 V		SINGLE	SMALL OUTLINE	SOP16,.25	Switching Regulator or Controllers	1.27 mm	125 Cel	3.15 V	CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	3.45 V	DUAL	R-PDSO-G16	1	14.5 V	1.75 mm	3.9 mm	Not Qualified	8.4 V	12 V		8 V	e4	NOT SPECIFIED		260	9.9 mm	3.3 V	14.5 V
TPS51225BRUKT	Texas Instruments	DUAL SWITCHING CONTROLLER	INDUSTRIAL	20	HVQCCN	SQUARE	YES	355 kHz	PLASTIC/EPOXY		10 A	1			NO LEAD	PULSE WIDTH MODULATION			PHASE-SHIFT	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.4 mm	85 Cel	4.5 V		-40 Cel	NICKEL PALLADIUM GOLD	5.5 V	QUAD	S-PQCC-N20	1		.8 mm	3 mm			12 V		5.5 V	e4	30	2	260	3 mm	3.3 V	24 V
TPS51225CRUKT	Texas Instruments	DUAL SWITCHING CONTROLLER	INDUSTRIAL	20	HVQCCN	SQUARE	YES	355 kHz	PLASTIC/EPOXY		10 A	1			NO LEAD	PULSE WIDTH MODULATION			PHASE-SHIFT	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.4 mm	85 Cel	4.5 V		-40 Cel	NICKEL PALLADIUM GOLD	5.5 V	QUAD	S-PQCC-N20	2		.8 mm	3 mm			12 V	ALSO OPERATES AT 5 VOLT OUTPUT	5.5 V	e4	30	2	260	3 mm	3.3 V	24 V
TPS51650RSLT	Texas Instruments	DUAL SWITCHING CONTROLLER	OTHER		HVQCCN	SQUARE	YES	600 kHz	PLASTIC/EPOXY		20 A	1			NO LEAD	PULSE WIDTH MODULATION			PHASE-SHIFT	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.4 mm	105 Cel	.25 V		-10 Cel	NICKEL PALLADIUM GOLD	1.52 V	QUAD	S-PQCC-N48	3		1 mm	6 mm			3.3 V	ALSO OPERATES IN 5 VOLT NOMINAL SUPPLY VOLTAGE	3 V	e4	30	2	260	6 mm		28 V
TPS59640RSLR	Texas Instruments	DUAL SWITCHING CONTROLLER	INDUSTRIAL	48	HVQCCN	SQUARE	YES	600 kHz	PLASTIC/EPOXY		90 A	1			NO LEAD	PULSE WIDTH MODULATION			PHASE-SHIFT	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.4 mm	105 Cel	.25 V	VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD	1.52 V	QUAD	S-PQCC-N48	2		1 mm	6 mm			3.3 V	ALSO REQUIRED 5V SUPPLY	3 V	e4	30	2	260	6 mm		28 V
TPS59640RSLT	Texas Instruments	DUAL SWITCHING CONTROLLER	INDUSTRIAL	48	HVQCCN	SQUARE	YES	600 kHz	PLASTIC/EPOXY		90 A	1			NO LEAD	PULSE WIDTH MODULATION			PHASE-SHIFT	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.4 mm	105 Cel	.25 V	VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD	1.52 V	QUAD	S-PQCC-N48	2		1 mm	6 mm			3.3 V	ALSO REQUIRED 5V SUPPLY	3 V	e4	30	2	260	6 mm		28 V
TL1451CNS	Texas Instruments	DUAL SWITCHING CONTROLLER	OTHER	16	SOP	RECTANGULAR	YES	500 kHz	PLASTIC/EPOXY	2.4 mA	.021 A	1	BIPOLAR		GULL WING	PULSE WIDTH MODULATION	6 V		BUCK-BOOST	SMALL OUTLINE	SOP16,.3	Switching Regulator or Controllers	1.27 mm	85 Cel	1 V	VOLTAGE-MODE	-20 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G16	1		2 mm	5.3 mm	Not Qualified		6 V		3.6 V	e4	30	2	260	10.2 mm	2.5 V	50 V
TPS54494PWP	Texas Instruments	DUAL SWITCHING CONTROLLER	INDUSTRIAL	16	HTSSOP	RECTANGULAR	YES	700 kHz	PLASTIC/EPOXY	2 mA	4 A	1			GULL WING	PULSE WIDTH MODULATION	12 V		BUCK	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Switching Regulator or Controllers	.65 mm	85 Cel	.76 V	VOLTAGE-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	7 V	DUAL	R-PDSO-G16	2		1.2 mm	4.4 mm	Not Qualified		12 V	OUTPUT VOLTAGE RANGE IS 0.76 TO 7V; OUTPUT CURRENT LIMIT IS 5A	4.5 V	e4	NOT SPECIFIED	2	260	5 mm		18 V
TPS51275CRUKT	Texas Instruments	DUAL SWITCHING CONTROLLER	AUTOMOTIVE	20	HVQCCN	SQUARE	YES	355 kHz	PLASTIC/EPOXY		20 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.4 mm	125 Cel	4.5 V		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5.5 V	QUAD	S-PQCC-N20	1		.8 mm	3 mm			12 V	ADJUSTABLE OUTPUT MODE FROM 4.5 TO 5.5V AND 2.97 TO 3.63V	5 V	e4	NOT SPECIFIED	4	260	3 mm	3.3 V	24 V
TPS51275RUKT	Texas Instruments	DUAL SWITCHING CONTROLLER	INDUSTRIAL	20	HVQCCN	SQUARE	YES	355 kHz	PLASTIC/EPOXY		20 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.4 mm	85 Cel	4.5 V		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5.5 V	QUAD	S-PQCC-N20	2		.8 mm	3 mm			12 V	ADJUSTABLE OUTPUT MODE FROM 4.5 TO 5.5V AND 2.97 TO 3.63V	5 V	e4	NOT SPECIFIED	4	260	3 mm	3.3 V	24 V
TPS54394PWP	Texas Instruments	DUAL SWITCHING CONTROLLER	INDUSTRIAL		HTSSOP	RECTANGULAR	YES	700 kHz	PLASTIC/EPOXY		3 A				GULL WING					SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH				85 Cel	.76 V		-40 Cel	NICKEL PALLADIUM GOLD	7 V	DUAL	R-PDSO-G16	2								4.8 V	e4	30	2	260			18 V
TPS54395PWP	Texas Instruments	DUAL SWITCHING CONTROLLER	INDUSTRIAL	16	HTSSOP	RECTANGULAR	YES	700 kHz	PLASTIC/EPOXY	2 mA	3 A	1			GULL WING	PULSE WIDTH MODULATION	12 V		BUCK	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Switching Regulator or Controllers	.65 mm	85 Cel	.76 V	VOLTAGE-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	7 V	DUAL	R-PDSO-G16	2		1.2 mm	4.4 mm	Not Qualified		12 V	OUTPUT VOLTAGE RANGE IS 0.76 TO 7V	4.5 V	e4	NOT SPECIFIED	2	260	5 mm		18 V
LP3907QTL-VXSS	Texas Instruments	DUAL SWITCHING CONTROLLER	INDUSTRIAL	25	VFBGA	SQUARE	YES	2100 kHz	PLASTIC/EPOXY			1			BALL	PULSE WIDTH MODULATION			BUCK	GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.5 mm	85 Cel		VOLTAGE-MODE	-40 Cel			BOTTOM	S-PBGA-B25			.675 mm	2.5 mm			3.6 V		2.8 V					2.5 mm		5.5 V
TPS54680MPWPEP	Texas Instruments	DUAL SWITCHING CONTROLLER	MILITARY		HTSSOP	RECTANGULAR	YES	700 kHz	PLASTIC/EPOXY		6 A				GULL WING					SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH				125 Cel	.9 V	VOLTAGE-MODE	-55 Cel	NICKEL PALLADIUM GOLD	3.3 V	DUAL	R-PDSO-G28	2		1.2 mm						3 V	e4	30	1	260			6 V
TPS54680MPWPREP	Texas Instruments	DUAL SWITCHING CONTROLLER	MILITARY		HTSSOP	RECTANGULAR	YES	700 kHz	PLASTIC/EPOXY		6 A				GULL WING					SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH				125 Cel	.9 V	VOLTAGE-MODE	-55 Cel	NICKEL PALLADIUM GOLD	3.3 V	DUAL	R-PDSO-G28	2		1.2 mm						3 V	e4	30	1	260			6 V
L6718TR	STMicroelectronics	DUAL SWITCHING CONTROLLER		56	QCCN	SQUARE	YES	220 kHz	PLASTIC/EPOXY						NO LEAD					CHIP CARRIER	LCC56,.27SQ,16	Switching Regulator or Controllers	.4 mm			VOLTAGE-MODE		NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N56	3				Not Qualified					e4	30		260
L6718	STMicroelectronics	DUAL SWITCHING CONTROLLER		56	QCCN	SQUARE	YES	220 kHz	PLASTIC/EPOXY						NO LEAD					CHIP CARRIER	LCC56,.27SQ,16	Switching Regulator or Controllers	.4 mm			VOLTAGE-MODE		NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N56	3				Not Qualified					e4	30		260
L6759DTR	STMicroelectronics	DUAL SWITCHING CONTROLLER	COMMERCIAL	48	HVQCCN	SQUARE	YES	200 kHz	UNSPECIFIED			1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.4 mm	70 Cel			0 Cel			QUAD	S-XQCC-N48			1 mm	6 mm			5 V		4.75 V					6 mm		5.25 V
L6759D	STMicroelectronics	DUAL SWITCHING CONTROLLER	COMMERCIAL	48	HVQCCN	SQUARE	YES	200 kHz	UNSPECIFIED			1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.4 mm	70 Cel			0 Cel			QUAD	S-XQCC-N48			1 mm	6 mm			5 V		4.75 V					6 mm		5.25 V
TPS542941PWP	Texas Instruments	DUAL SWITCHING CONTROLLER	INDUSTRIAL	16	HTSSOP	RECTANGULAR	YES	700 kHz	PLASTIC/EPOXY	2 mA	2 A	1			GULL WING	PULSE WIDTH MODULATION	12 V		BUCK	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Switching Regulator or Controllers	.65 mm	85 Cel	.76 V	VOLTAGE-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	7 V	DUAL	R-PDSO-G16	2		1.2 mm	4.4 mm	Not Qualified		12 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 0.76 TO 7V	4.5 V	e4	NOT SPECIFIED	2	260	5 mm		18 V
TPS542951PWP	Texas Instruments	DUAL SWITCHING CONTROLLER	INDUSTRIAL	16	HTSSOP	RECTANGULAR	YES	700 kHz	PLASTIC/EPOXY	2 mA	2 A	1			GULL WING	PULSE WIDTH MODULATION	12 V		BUCK	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Switching Regulator or Controllers	.65 mm	85 Cel	.76 V	VOLTAGE-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	7 V	DUAL	R-PDSO-G16	2		1.2 mm	4.4 mm	Not Qualified		12 V	OUTPUT VOLTAGE RANGE FROM 0.76V TO 7V	4.5 V	e4	NOT SPECIFIED	2	260	5 mm	5.5 V	18 V
PAM2306AYPAA	Diodes Incorporated	DUAL SWITCHING CONTROLLER	INDUSTRIAL	12	HVSON	SQUARE	YES	1500 kHz	PLASTIC/EPOXY			1			NO LEAD	PULSE WIDTH MODULATION			BUCK	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.45 mm	85 Cel		CURRENT-MODE	-40 Cel	MATTE TIN		DUAL	S-PDSO-N12	3		.8 mm	3 mm			3.6 V		2.5 V	e3	30		260	3 mm		5.5 V
PAM2306AYPBB	Diodes Incorporated	DUAL SWITCHING CONTROLLER	INDUSTRIAL	12	HVSON	SQUARE	YES	1500 kHz	PLASTIC/EPOXY			1			NO LEAD	PULSE WIDTH MODULATION			BUCK	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.45 mm	85 Cel		CURRENT-MODE	-40 Cel	MATTE TIN		DUAL	S-PDSO-N12	3		.8 mm	3 mm			3.6 V	VOUT2=1.2 VOLT	2.5 V	e3	30		260	3 mm	1.2 V	5.5 V
PAM2306AYPBK	Diodes Incorporated	DUAL SWITCHING CONTROLLER	INDUSTRIAL	12	HVSON	SQUARE	YES	1500 kHz	PLASTIC/EPOXY			1			NO LEAD	PULSE WIDTH MODULATION			BUCK	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.45 mm	85 Cel		CURRENT-MODE	-40 Cel	MATTE TIN		DUAL	S-PDSO-N12	3		.8 mm	3 mm			3.6 V	VOUT2=3.3 VOLT	2.5 V	e3	30		260	3 mm	1.2 V	5.5 V
PAM2306AYPCB	Diodes Incorporated	DUAL SWITCHING CONTROLLER	INDUSTRIAL	12	HVSON	SQUARE	YES	1500 kHz	PLASTIC/EPOXY			1			NO LEAD	PULSE WIDTH MODULATION			BUCK	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.45 mm	85 Cel		CURRENT-MODE	-40 Cel	MATTE TIN		DUAL	S-PDSO-N12	3		.8 mm	3 mm			3.6 V	VOUT1=1.5 VOLT	2.5 V	e3	30		260	3 mm	1.2 V	5.5 V
PAM2306AYPKB	Diodes Incorporated	DUAL SWITCHING CONTROLLER	INDUSTRIAL	12	HVSON	SQUARE	YES	1500 kHz	PLASTIC/EPOXY			1			NO LEAD	PULSE WIDTH MODULATION			BUCK	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.45 mm	85 Cel		CURRENT-MODE	-40 Cel	MATTE TIN		DUAL	S-PDSO-N12	3		.8 mm	3 mm			3.6 V	VOUT1=3.3 VOLT	2.5 V	e3	30		260	3 mm	1.2 V	5.5 V
PAM2308BYMAA	Diodes Incorporated	DUAL SWITCHING CONTROLLER	INDUSTRIAL	10	HVSON	SQUARE	YES	1500 kHz	PLASTIC/EPOXY			1			NO LEAD	PULSE WIDTH MODULATION			BUCK	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel		CURRENT-MODE	-40 Cel	MATTE TIN		DUAL	S-PDSO-N10	3		.8 mm	3 mm			3.6 V		2.5 V	e3	30		260	3 mm		5.5 V
ADP5033ACBZ-3-R7	Analog Devices	DUAL SWITCHING CONTROLLER	AUTOMOTIVE	16	VFBGA	SQUARE	YES	3500 kHz	PLASTIC/EPOXY		.8 A	1	BICMOS		BALL	PULSE WIDTH MODULATION			BUCK	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA16,4X4,20	Switching Regulator or Controllers	.5 mm	125 Cel		CURRENT-MODE	-40 Cel	TIN SILVER COPPER		BOTTOM	S-PBGA-B16	1		.66 mm	2 mm	Not Qualified		3.6 V	OUTPUT VOLTAGE RANGE FROM 0.8 TO 5.2 VOLT AND 0.8V TO 3.8V FOR LDO	2.3 V	e1				2 mm		5.5 V
ADP5034ACPZ-3-R7	Analog Devices	DUAL SWITCHING CONTROLLER		24	QCCN	SQUARE	YES		PLASTIC/EPOXY				DMOS		NO LEAD			1.8/5,2.5/5		CHIP CARRIER	LCC24,.16SQ,20	Power Management Circuits	.5 mm							QUAD	S-PQCC-N24					Not Qualified						NOT SPECIFIED		NOT SPECIFIED
ADP5034AREZ-1-R7	Analog Devices	DUAL SWITCHING CONTROLLER		28	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY				DMOS		GULL WING			1.8/5,2.5/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	Power Management Circuits	.635 mm					MATTE TIN		DUAL	R-PDSO-G28	3				Not Qualified					e3	30		260
ADP5034AREZ-1	Analog Devices	DUAL SWITCHING CONTROLLER		28	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY				DMOS		GULL WING			1.8/5,2.5/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	Power Management Circuits	.635 mm					MATTE TIN		DUAL	R-PDSO-G28	3				Not Qualified					e3	30		260
ADP5037ACPZ-3-R7	Analog Devices	DUAL SWITCHING CONTROLLER		24	QCCN	SQUARE	YES		PLASTIC/EPOXY	.245 mA					NO LEAD			1.8/5,2.5/5		CHIP CARRIER	LCC24,.16SQ,20	Power Management Circuits	.5 mm							QUAD	S-PQCC-N24					Not Qualified						NOT SPECIFIED		NOT SPECIFIED
LM5045SQX/NOPB	Texas Instruments	DUAL SWITCHING CONTROLLER	AUTOMOTIVE	28	HVQCCN	SQUARE	YES	2000 kHz	PLASTIC/EPOXY			1			NO LEAD	PULSE WIDTH MODULATION			PUSH-PULL	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.2SQ,20	Switching Regulator or Controllers	.5 mm	125 Cel		CURRENT-MODE	-40 Cel	MATTE TIN		QUAD	S-PQCC-N28	1	14 V	.8 mm	5 mm	Not Qualified	10 V	48 V		14 V	e3	30		260	5 mm		14 V
LM5046SQX/NOPB	Texas Instruments	DUAL SWITCHING CONTROLLER	AUTOMOTIVE	28	HVQCCN	SQUARE	YES	1000 kHz	PLASTIC/EPOXY			1			NO LEAD	PULSE WIDTH MODULATION			PUSH-PULL	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.2SQ,20	Switching Regulator or Controllers	.5 mm	125 Cel		CURRENT-MODE	-40 Cel	MATTE TIN		QUAD	S-PQCC-N28	1	14 V	.8 mm	5 mm	Not Qualified	10 V	48 V		14 V	e3	30		260	5 mm		14 V
STOD13CMTPUR	STMicroelectronics	DUAL SWITCHING CONTROLLER	INDUSTRIAL	12	HVSON	SQUARE	YES	1650 kHz	PLASTIC/EPOXY			1			NO LEAD	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.45 mm	85 Cel		CURRENT-MODE	-40 Cel	MATTE TIN		DUAL	S-PDSO-N12	1		.6 mm	3 mm			3.7 V	ADJUSTABLE VOLTAGE RANGE FROM -4.4 VOLT TO -1.4 VOLT	2.5 V	e3	40		260	3 mm	4.6 V	4.5 V
TPS51621RHAR	Texas Instruments	DUAL SWITCHING CONTROLLER	OTHER	40	HQCCN	SQUARE	YES	500 kHz	PLASTIC/EPOXY		60 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG	LCC40,.24SQ,20	Switching Regulator or Controllers	.5 mm	105 Cel	.3 V	VOLTAGE-MODE	-10 Cel	NICKEL PALLADIUM GOLD	1.5 V	QUAD	S-PQCC-N40	3		.9 mm	6 mm	Not Qualified		5 V		3 V	e4	30	1	260	6 mm		28 V
LM25119QPSQX/NOPB	Texas Instruments	DUAL SWITCHING CONTROLLER	AUTOMOTIVE	32	HVQCCN	SQUARE	YES	750 kHz	UNSPECIFIED		40 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Switching Regulator or Controllers	.5 mm	125 Cel	.8 V	CURRENT-MODE	-40 Cel	MATTE TIN	41.3 V	QUAD	S-XQCC-N32	3		.8 mm	5 mm	Not Qualified		12 V	PROGRAMMABLE OUTPUT FROM 0.8 V	4.5 V	e3	30	2	260	5 mm		42 V
TPS51275BRUKR	Texas Instruments	DUAL SWITCHING CONTROLLER	AUTOMOTIVE	20	HVQCCN	SQUARE	YES	355 kHz	PLASTIC/EPOXY		20 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.4 mm	125 Cel	4.5 V		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5.5 V	QUAD	S-PQCC-N20	2		.8 mm	3 mm			12 V	ADJUSTABLE OUTPUT MODE FROM 4.5 TO 5.5V AND 2.97 TO 3.63V	5 V	e4	NOT SPECIFIED	4	260	3 mm	3.3 V	24 V
TPS51275BRUKT	Texas Instruments	DUAL SWITCHING CONTROLLER	AUTOMOTIVE	20	HVQCCN	SQUARE	YES	355 kHz	PLASTIC/EPOXY		20 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.4 mm	125 Cel	4.5 V		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5.5 V	QUAD	S-PQCC-N20	1		.8 mm	3 mm			12 V	ADJUSTABLE OUTPUT MODE FROM 4.5 TO 5.5V AND 2.97 TO 3.63V	5 V	e4	NOT SPECIFIED	4	260	3 mm	3.3 V	24 V
TPS65273VRHHR	Texas Instruments	DUAL SWITCHING CONTROLLER	AUTOMOTIVE	36	HVQCCN	SQUARE	YES	1600 kHz	PLASTIC/EPOXY		3.5 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC36,.25SQ,20	Switching Regulator or Controllers	.5 mm	125 Cel	.6 V	CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD	15 V	QUAD	S-PQCC-N36	2		1 mm	6 mm	Not Qualified		12 V	ADJUSTABLE OUTPUT MODE FROM 0.68 V TO 1.95 V	4.5 V	e4	30	2	260	6 mm		18 V

Switching Regulators & Controllers

Switching regulators and controllers are electronic devices used to regulate the output voltage and current of power supplies. They operate by rapidly switching a power supply circuit between on and off states, resulting in a high-frequency waveform that can be filtered and smoothed to produce a stable output voltage.

Switching regulators and controllers offer several advantages over traditional linear regulators, including higher efficiency and the ability to handle a wider range of input voltages. They are commonly used in applications such as power supplies for computers, LED lighting, and motor control.

Switching regulators and controllers come in a variety of forms, including step-up (boost), step-down (buck), and step-up/down (buck-boost) configurations. They may be designed as integrated circuits (ICs) or as standalone modules.

Switching regulators and controllers typically include feedback control circuits to adjust the output voltage and current, as well as protection circuits to prevent overvoltage, overcurrent, and overtemperature conditions. They may also include features such as soft-start to reduce inrush currents and synchronization with external clock signals.