SQUARE Switching Regulators & Controllers 1,280

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Maximum Switching Frequency	Package Body Material	Maximum Supply Current (Isup)	Maximum Output Current	No. of Functions	No. of Channels	Technology	Terminal Form	Control Technique	Main Output Efficiency	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Switcher Config	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Output Voltage	Control Mode	Minimum Operating Temperature	Terminal Finish	Maximum Output Voltage	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width (mm)	Qualification	Minimum Supply Voltage (Vsup)	Nominal Input Voltage	Additional Features	Minimum Input Voltage	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	No. of Outputs	Peak Reflow Temperature (C)	Length	Nominal Output Voltage	Maximum Input Voltage
TPS63700DRCRG4	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	10	HVSON	SQUARE	YES	1380 kHz	PLASTIC/EPOXY		1.14 A	1			NO LEAD	PULSE WIDTH MODULATION				BUCK-BOOST	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-15 V	CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	-2 V	DUAL	S-PDSO-N10	2		1 mm	3 mm	Not Qualified		3.6 V	ALSO OPERATES IN ADJUSTABLE MODE FROM -2 TO -15V	2.7 V	e4	NOT SPECIFIED		260	3 mm		5.5 V
UCC2541RHBRG4	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	32	HVQCCN	SQUARE	YES	330 kHz	PLASTIC/EPOXY		3.5 A	1		BIPOLAR	NO LEAD	PULSE WIDTH MODULATION				SINGLE	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Switching Regulator or Controllers	.5 mm	105 Cel		VOLTAGE-MODE	-40 Cel			QUAD	S-PQCC-N32			1 mm	5 mm	Not Qualified		12 V	AVERAGE CURRENT MODE OPERATION IS ALSO POSSIBLE	8.5 V		NOT SPECIFIED		NOT SPECIFIED	5 mm		35 V
UCC2541RHBT	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	32	HVQCCN	SQUARE	YES	330 kHz	PLASTIC/EPOXY		3.5 A	1		BIPOLAR	NO LEAD	PULSE WIDTH MODULATION				SINGLE	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Switching Regulator or Controllers	.5 mm	105 Cel		VOLTAGE-MODE	-40 Cel			QUAD	S-PQCC-N32			1 mm	5 mm	Not Qualified		12 V	AVERAGE CURRENT MODE OPERATION IS ALSO POSSIBLE	8.5 V		NOT SPECIFIED		NOT SPECIFIED	5 mm		35 V
TPS40222DRPRG4	Texas Instruments	SWITCHING REGULATOR	AUTOMOTIVE	6	HVSON	SQUARE	YES	1250 kHz	PLASTIC/EPOXY		1.6 A	1			NO LEAD	PULSE WIDTH MODULATION				BUCK	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.95 mm	125 Cel	.8 V	CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	7 V	DUAL	S-PDSO-N6	2		1 mm	3 mm	Not Qualified		5 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 7.2V	4.5 V	e4	NOT SPECIFIED	1	260	3 mm		8 V
TPS40130RHBT	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	32	HVQCCN	SQUARE	YES	1200 kHz	PLASTIC/EPOXY			1			NO LEAD	PULSE WIDTH MODULATION				PHASE-SHIFT	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Switching Regulator or Controllers	.5 mm	85 Cel		CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N32	2		1 mm	5 mm	Not Qualified		5 V		4.5 V	e4	30	1	260	5 mm		5.5 V
TPS60212DGSRG4	Texas Instruments	SWITCHED CAPACITOR REGULATOR	INDUSTRIAL	10	TSSOP	SQUARE	YES	400 kHz	PLASTIC/EPOXY		.05 A	1			GULL WING					BOOST	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Other Analog ICs	.5 mm	85 Cel	3.3 V		-40 Cel	NICKEL PALLADIUM GOLD	3.3 V	DUAL	S-PDSO-G10	1		1.1 mm	3 mm	Not Qualified		2.4 V		1.8 V	e4	30	1	260	3 mm	3.3 V	3.6 V
TPS51124RGERG4	Texas Instruments	DUAL SWITCHING CONTROLLER	INDUSTRIAL	24	HVQCCN	SQUARE	YES	420 kHz	PLASTIC/EPOXY		15 A	1			NO LEAD	PULSE WIDTH MODULATION				PUSH-PULL	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	Switching Regulator or Controllers	.5 mm	85 Cel	.76 V	VOLTAGE-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5.5 V	QUAD	S-PQCC-N24	2		1 mm	4 mm	Not Qualified		5 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 0.76V TO 5.5V; IT ALSO REQUIRED 3 TO 28V INPUT SUPPLY	3 V	e4	NOT SPECIFIED	2	260	4 mm		28 V
TPS51124RGET	Texas Instruments	DUAL SWITCHING CONTROLLER	INDUSTRIAL	24	HVQCCN	SQUARE	YES	420 kHz	PLASTIC/EPOXY		15 A	1			NO LEAD	PULSE WIDTH MODULATION				PUSH-PULL	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	Switching Regulator or Controllers	.5 mm	85 Cel	.76 V	VOLTAGE-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5.5 V	QUAD	S-PQCC-N24	2		1 mm	4 mm	Not Qualified		5 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 0.76V TO 5.5V; IT ALSO REQUIRED 3 TO 28V INPUT SUPPLY	3 V	e4	NOT SPECIFIED	2	260	4 mm		28 V
UCC3809PTR-2G4	Texas Instruments	SWITCHING CONTROLLER	COMMERCIAL	8	TSSOP	SQUARE	YES	1000 kHz	PLASTIC/EPOXY	25 mA	.8 A	1		BCDMOS	GULL WING	PULSE WIDTH MODULATION		12 V		SINGLE	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Switching Regulator or Controllers	.65 mm	70 Cel		CURRENT-MODE	0 Cel	NICKEL PALLADIUM GOLD SILVER		DUAL	S-PDSO-G8	2	19 V	1.1 mm	3 mm	Not Qualified	15 V	12 V		10 V	e4	30		260	3 mm		15 V
MAX6399ATA-T	Maxim Integrated	SWITCHING CONTROLLER	AUTOMOTIVE	8	HVSSON	SQUARE	YES		UNSPECIFIED	.13 mA		1		BICMOS	NO LEAD			14 V	14	SINGLE	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE, SHRINK PITCH	SOLCC8,.12,25	Power Management Circuits	.65 mm	125 Cel			-40 Cel	TIN LEAD		DUAL	S-XDSO-N8	1		.8 mm	3 mm	Not Qualified		14 V		5.75 V	e0				3 mm		72 V
TL1464IPTR	Texas Instruments	SWITCHING REGULATOR	COMMERCIAL EXTENDED	48	LFQFP	SQUARE	YES	2000 kHz	PLASTIC/EPOXY		1 A	4		BIPOLAR	GULL WING	PULSE WIDTH MODULATION				SINGLE	FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20	Switching Regulator or Controllers	.5 mm	75 Cel		VOLTAGE-MODE	-20 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQFP-G48	1		1.6 mm	7 mm	Not Qualified		6 V		3.1 V	e4	30		260	7 mm		12 V
TL1464IPT	Texas Instruments	SWITCHING REGULATOR	COMMERCIAL EXTENDED	48	LFQFP	SQUARE	YES	2000 kHz	PLASTIC/EPOXY		1 A	4		BIPOLAR	GULL WING	PULSE WIDTH MODULATION		6 V		SINGLE	FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20	Switching Regulator or Controllers	.5 mm	75 Cel	1.485 V	VOLTAGE-MODE	-20 Cel	NICKEL PALLADIUM GOLD	1.515 V	QUAD	S-PQFP-G48	1		1.6 mm	7 mm	Not Qualified		6 V		3.1 V	e4	30		260	7 mm	1.5 V	12 V
UCC38C41DGKRG4	Texas Instruments	SWITCHING CONTROLLER	COMMERCIAL	8	TSSOP	SQUARE	YES	1000 kHz	PLASTIC/EPOXY		1 A	1		BICMOS	GULL WING	PULSE WIDTH MODULATION				SINGLE	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Switching Regulator or Controllers	.65 mm	70 Cel		VOLTAGE-MODE	0 Cel			DUAL	S-PDSO-G8			1.1 mm	3 mm	Not Qualified		15 V	ALSO OPERATES IN CURRENT MODE	12 V		NOT SPECIFIED		NOT SPECIFIED	3 mm		18 V
UC2861QG3	Texas Instruments	SWITCHING CONTROLLER	OTHER	20	QCCJ	SQUARE	YES	1000 kHz	PLASTIC/EPOXY		1.5 A	1		BIPOLAR	J BEND	RESONANT CONTROL				PUSH-PULL	CHIP CARRIER	LDCC20,.4SQ	Switching Regulator or Controllers	1.27 mm	85 Cel		VOLTAGE-MODE	-25 Cel	MATTE TIN		QUAD	S-PQCC-J20	2		4.57 mm	8.965 mm	Not Qualified		12 V		11.5 V	e3	30		260	8.965 mm		20 V
UCC25705DGKTRG4	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	8	TSSOP	SQUARE	YES	4000 kHz	PLASTIC/EPOXY	5 mA	.02 A	1			GULL WING	PULSE WIDTH MODULATION		11 V		SINGLE	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Switching Regulator or Controllers	.65 mm	85 Cel		VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD SILVER		DUAL	S-PDSO-G8	2	15 V	1.1 mm	3 mm	Not Qualified		11 V		9 V	e4	30		260	3 mm		15 V
TPS61026DRCR	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	10	HVSON	SQUARE	YES	720 kHz	PLASTIC/EPOXY		2.1 A	1			NO LEAD	PULSE WIDTH MODULATION				BOOST	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.12,20	Switching Regulator or Controllers	.5 mm	85 Cel	5 V	CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5 V	DUAL	S-PDSO-N10	2		1 mm	3 mm	Not Qualified		1.2 V		.9 V	e4	NOT SPECIFIED	1	260	3 mm	5 V	5.5 V
TPS61026DRCTG4	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	10	HVSON	SQUARE	YES	720 kHz	PLASTIC/EPOXY		2.1 A	1			NO LEAD	PULSE WIDTH MODULATION				BOOST	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.12,20	Switching Regulator or Controllers	.5 mm	85 Cel	5 V	CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5 V	DUAL	S-PDSO-N10	2		1 mm	3 mm	Not Qualified		1.2 V		.9 V	e4	NOT SPECIFIED	1	260	3 mm	5 V	5.5 V
TPS61029DRCTG4	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	10	HVSON	SQUARE	YES	720 kHz	PLASTIC/EPOXY		2.1 A	1			NO LEAD	PULSE WIDTH MODULATION				BOOST	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.12,20	Switching Regulator or Controllers	.5 mm	85 Cel	1.8 V	CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5.5 V	DUAL	S-PDSO-N10	2		1 mm	3 mm	Not Qualified		1.2 V	ALSO HAS ADJUSTABLE OUTPUT VOLTAGE UP TO 5.5 V	.9 V	e4	NOT SPECIFIED	1	260	3 mm		5.5 V
UC3854QG3	Texas Instruments	POWER FACTOR CONTROLLER	COMMERCIAL	20	QCCJ	SQUARE	YES	118 kHz	PLASTIC/EPOXY		1.5 A	1		BIPOLAR	J BEND	PULSE WIDTH MODULATION				BOOST	CHIP CARRIER	LDCC20,.4SQ	Switching Regulator or Controllers	1.27 mm	70 Cel		CURRENT-MODE	0 Cel	MATTE TIN		QUAD	S-PQCC-J20	2		4.57 mm	8.965 mm	Not Qualified		18 V		11 V	e3	30		260	8.965 mm		35 V
UC2526AQG3	Texas Instruments	SWITCHING CONTROLLER	OTHER	20	QCCJ	SQUARE	YES	550 kHz	PLASTIC/EPOXY		.2 A	1		CMOS	J BEND	PULSE WIDTH MODULATION				PUSH-PULL	CHIP CARRIER	LDCC20,.4SQ	Switching Regulator or Controllers	1.27 mm	85 Cel		VOLTAGE-MODE	-25 Cel	MATTE TIN		QUAD	S-PQCC-J20	2		4.57 mm	8.965 mm	Not Qualified		15 V		7 V	e3	30		260	8.965 mm	5 V	35 V
UC2825AQG3	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	20	QCCJ	SQUARE	YES	1150 kHz	PLASTIC/EPOXY		2.2 A	1		BIPOLAR	J BEND	PULSE WIDTH MODULATION				PUSH-PULL	CHIP CARRIER	LDCC20,.4SQ	Switching Regulator or Controllers	1.27 mm	85 Cel		VOLTAGE-MODE	-40 Cel	MATTE TIN		QUAD	S-PQCC-J20	2		4.57 mm	8.965 mm	Not Qualified		12 V	CAN ALSO BE CONFIGURED IN CURRENT MODE	8.8 V	e3	30		260	8.965 mm		20 V
NCP5217AMNTXG	Onsemi	SWITCHING REGULATOR	INDUSTRIAL	14	HVQCCN	SQUARE	YES	330 kHz	UNSPECIFIED			1			NO LEAD	PULSE WIDTH MODULATION				BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel			-40 Cel	MATTE TIN		QUAD	S-XQCC-N14	1		1 mm	3.5 mm	Not Qualified		12 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8V TO 3.3V	4.5 V	e3	30		260	3.5 mm		27 V
TPS62000SHKK	Texas Instruments	SWITCHING REGULATOR	MILITARY	10	DFP	SQUARE	YES	1000 kHz	CERAMIC, METAL-SEALED COFIRED		.3 A	1			FLAT	PULSE WIDTH MODULATION		3.6 V		BUCK	FLATPACK	FL10,.24	Switching Regulator or Controllers	1.27 mm	210 Cel	.9 V	CURRENT-MODE	-55 Cel	GOLD	5 V	DUAL	S-CDFP-F10			2.31 mm	6.475 mm	Not Qualified		3.6 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8V TO 5.5V; ALSO HAS PFM CONTROL TECHNIQUE	2 V	e4		1		6.475 mm	2.5 V	5.5 V
L6714TR	STMicroelectronics	SWITCHING CONTROLLER	COMMERCIAL	64	HTFQFP	SQUARE	YES	170 kHz	PLASTIC/EPOXY			1			GULL WING	PULSE WIDTH MODULATION				PHASE-SHIFT	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP64,.47SQ	Switching Regulator or Controllers	.5 mm	70 Cel		CURRENT-MODE	0 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQFP-G64	3		1.2 mm	10 mm	Not Qualified		12 V		10.2 V	e4				10 mm		13.8 V
L6714	STMicroelectronics	SWITCHING CONTROLLER	COMMERCIAL	64	HTFQFP	SQUARE	YES	170 kHz	PLASTIC/EPOXY			1			GULL WING	PULSE WIDTH MODULATION				PHASE-SHIFT	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP64,.47SQ	Switching Regulator or Controllers	.5 mm	70 Cel		CURRENT-MODE	0 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQFP-G64	3		1.2 mm	10 mm	Not Qualified		12 V		10.2 V	e4				10 mm		13.8 V
MAX1533ETJ	Maxim Integrated	SWITCHING CONTROLLER	OTHER	32	HVQCCN	SQUARE	YES	500 kHz	UNSPECIFIED			1		BICMOS	NO LEAD	PULSE WIDTH MODULATION				BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel		CURRENT-MODE	0 Cel	TIN LEAD		QUAD	S-XQCC-N32	1		.8 mm	5 mm	Not Qualified		12 V		6 V	e0			245	5 mm		26 V
TPS61140DRCTG4	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	10	HVSON	SQUARE	YES	1200 kHz	PLASTIC/EPOXY		1.26 A	1	2		NO LEAD	PULSE WIDTH MODULATION	85 %			BOOST	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	2.5 V		-40 Cel	NICKEL PALLADIUM GOLD	27 V	DUAL	S-PDSO-N10	2		1 mm	3 mm	Not Qualified		3.6 V	PFM TECHNIQUE IS ALSO POSSIBLE	3 V	e4	30		260	3 mm	15 V	6 V
TPS61141DRCRG4	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	10	HVSON	SQUARE	YES	1200 kHz	PLASTIC/EPOXY		1.26 A	1	2		NO LEAD	PULSE WIDTH MODULATION	85 %			BOOST	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	2.5 V		-40 Cel	NICKEL PALLADIUM GOLD	27 V	DUAL	S-PDSO-N10	2		1 mm	3 mm	Not Qualified		3.6 V	PFM TECHNIQUE IS ALSO POSSIBLE	3 V	e4	30		260	3 mm		6 V
STOD03ATPUR	STMicroelectronics	DUAL SWITCHING CONTROLLER	INDUSTRIAL	12	HVSON	SQUARE	YES	1700 kHz	PLASTIC/EPOXY		1.1 A	1			NO LEAD	PULSE WIDTH MODULATION				PHASE-SHIFT	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC12,.12,18	Switching Regulator or Controllers	.45 mm	85 Cel		CURRENT-MODE	-40 Cel	MATTE TIN		DUAL	S-PDSO-N12	3		.6 mm	3 mm	Not Qualified		3.7 V	ALSO OPERATES IN ADJUSTABLE MODE FROM -2.4 TO -5.4 V; ALSO AS -4.9 VOLT AVAILABLE	2.3 V	e3	30		260	3 mm	4.6 V	4.5 V
TCV7101F(TE12L,Q)	Toshiba	SWITCHING REGULATOR	OTHER	8	HSOF	SQUARE	YES	720 kHz	PLASTIC/EPOXY		3.8 A	1		CMOS	FLAT					BUCK	SMALL OUTLINE, HEAT SINK/SLUG	FL8,.2	Switching Regulator or Controllers	1.27 mm	85 Cel		VOLTAGE-MODE	0 Cel			DUAL	S-PDSO-F8			1 mm	5 mm	Not Qualified		3.3 V	ALSO OPERATES IN ADJUSTABLE DOWN TO 0.8	2.7 V					5 mm		5.5 V
UC2825QG3	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	20	QCCJ	SQUARE	YES	1000 kHz	PLASTIC/EPOXY		2 A	1		BICMOS	J BEND	PULSE WIDTH MODULATION				PUSH-PULL	CHIP CARRIER	LDCC20,.4SQ	Switching Regulator or Controllers	1.27 mm	85 Cel		VOLTAGE-MODE	-40 Cel	MATTE TIN		QUAD	S-PQCC-J20	2		4.57 mm	8.965 mm	Not Qualified		15 V	CAN ALSO BE CONFIGURED IN CURRENT MODE	8.8 V	e3	30		260	8.965 mm		30 V
UC2825QTRG3	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	20	QCCJ	SQUARE	YES	1000 kHz	PLASTIC/EPOXY		2 A	1		BICMOS	J BEND	PULSE WIDTH MODULATION				PUSH-PULL	CHIP CARRIER	LDCC20,.4SQ	Switching Regulator or Controllers	1.27 mm	85 Cel		VOLTAGE-MODE	-40 Cel			QUAD	S-PQCC-J20			4.57 mm	8.965 mm	Not Qualified		15 V	CAN ALSO BE CONFIGURED IN CURRENT MODE	8.8 V		NOT SPECIFIED		NOT SPECIFIED	8.965 mm		30 V
UC3825QTRG3	Texas Instruments	SWITCHING CONTROLLER	COMMERCIAL	20	QCCJ	SQUARE	YES	1000 kHz	PLASTIC/EPOXY		2 A	1		BICMOS	J BEND	PULSE WIDTH MODULATION				PUSH-PULL	CHIP CARRIER	LDCC20,.4SQ	Switching Regulator or Controllers	1.27 mm	70 Cel		VOLTAGE-MODE	0 Cel	MATTE TIN		QUAD	S-PQCC-J20	2		4.57 mm	8.965 mm	Not Qualified		15 V	CAN ALSO BE CONFIGURED IN CURRENT MODE	8.8 V	e3	30		260	8.965 mm		30 V
UC3856QG3	Texas Instruments	SWITCHING CONTROLLER	COMMERCIAL	20	QCCJ	SQUARE	YES	230 kHz	PLASTIC/EPOXY		2 A	1		BIPOLAR	J BEND	PULSE WIDTH MODULATION				PUSH-PULL	CHIP CARRIER	LDCC20,.4SQ	Switching Regulator or Controllers	1.27 mm	70 Cel		CURRENT-MODE	0 Cel	MATTE TIN		QUAD	S-PQCC-J20	2		4.57 mm	8.965 mm	Not Qualified		15 V		8 V	e3	30		260	8.965 mm		40 V
UCC2806QG3	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	20	QCCJ	SQUARE	YES	1000 kHz	PLASTIC/EPOXY		.5 A	1		BICMOS	J BEND	PULSE WIDTH MODULATION				PUSH-PULL	CHIP CARRIER	LDCC20,.4SQ	Switching Regulator or Controllers	1.27 mm	85 Cel		CURRENT-MODE	-40 Cel	MATTE TIN		QUAD	S-PQCC-J20	2		4.57 mm	8.965 mm	Not Qualified		12 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 2.5V TO 15V	8 V	e3	30		260	8.965 mm		14.5 V
L6928Q1	STMicroelectronics	SWITCHING REGULATOR		8	HVSON	SQUARE	YES	1400 kHz	UNSPECIFIED		1.65 A	1			NO LEAD	PULSE WIDTH MODULATION				BUCK	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.11,20	Switching Regulator or Controllers	.5 mm			CURRENT-MODE		Matte Tin (Sn)		DUAL	S-XDSO-N8	1		1 mm	3 mm	Not Qualified		3.6 V		2 V	e3	30		260	3 mm		5.5 V
STCF01PMR	STMicroelectronics	SWITCHING REGULATOR	INDUSTRIAL	10	HVSON	SQUARE	YES	1800 kHz	PLASTIC/EPOXY		1.2 A	1			NO LEAD	PULSE WIDTH MODULATION				BOOST	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.12,20	Switching Regulator or Controllers	.5 mm	85 Cel		VOLTAGE-MODE	-40 Cel	MATTE TIN		DUAL	S-PDSO-N10	1		1 mm	3 mm	Not Qualified		3.6 V		2.6 V	e3	30		260	3 mm		5.5 V
ADP3208DJCPZ-RL	Onsemi	SWITCHING CONTROLLER	OTHER	48	HVQCCN	SQUARE	YES	300 kHz	UNSPECIFIED			1			NO LEAD	PULSE WIDTH MODULATION				SINGLE	CHIP CARRIER			.5 mm	100 Cel		VOLTAGE-MODE	-10 Cel	TIN		QUAD	S-XQCC-N48	3		1 mm	7 mm	Not Qualified		5 V	ALSO OPERATES IN CURRENT MODE , ALSO OPERATES IN ADJUSTABLE MODE FROM 0.3 TO 1.5V	3.3 V	e3				7 mm		22 V
NCP5222MNR2G	Onsemi	SWITCHING CONTROLLER	INDUSTRIAL	28	HVQCCN	SQUARE	YES	330 kHz	UNSPECIFIED			1			NO LEAD	PULSE WIDTH MODULATION				SINGLE	CHIP CARRIER	LCC28,.16SQ,16	Switching Regulator or Controllers	.4 mm	85 Cel		VOLTAGE-MODE	-40 Cel	TIN		QUAD	S-XQCC-N28	1		1 mm	4 mm	Not Qualified		5 V	ALSO OPERATE OUTPUT VOLTAGE FROM 0.8 TO 3.3 VOLT	4.5 V	e3				4 mm		27 V
NCP5392QMNR2G	Onsemi	SWITCHING CONTROLLER	OTHER	40	HVQCCN	SQUARE	YES	1000 kHz	UNSPECIFIED			1			NO LEAD	PULSE WIDTH MODULATION				PUSH-PULL	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel			0 Cel	TIN		QUAD	S-XQCC-N40	1		1 mm	6 mm	Not Qualified		5 V		4.75 V	e3	30		260	6 mm		5.25 V
NCP5393BMNR2G	Onsemi	SWITCHING CONTROLLER	COMMERCIAL	48	HVQCCN	SQUARE	YES	900 kHz	UNSPECIFIED			1		HYBRID	NO LEAD	PULSE WIDTH MODULATION				SINGLE	CHIP CARRIER			.5 mm	70 Cel			0 Cel	TIN		QUAD	S-XQCC-N48	1		1 mm	7 mm	Not Qualified		5 V		4.75 V	e3	30		260	7 mm	.5 V	5.25 V
ST1S06PM33R	STMicroelectronics	SWITCHING REGULATOR		6	VSON	SQUARE	YES	1800 kHz	UNSPECIFIED		2.3 A	1			NO LEAD	PULSE WIDTH MODULATION				BUCK	SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.11,37	Switching Regulator or Controllers	.95 mm			CURRENT-MODE				DUAL	S-XDSO-N6			1 mm	3 mm	Not Qualified		5 V	AVAILABLE IN TAPE AND REEL	4.2 V		40		260	3 mm		6 V
ST1S06PMR	STMicroelectronics	SWITCHING REGULATOR		6	VSON	SQUARE	YES	1800 kHz	UNSPECIFIED		2.3 A	1			NO LEAD	PULSE WIDTH MODULATION				BUCK	SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.11,37	Switching Regulator or Controllers	.95 mm			CURRENT-MODE		TIN		DUAL	S-XDSO-N6			1 mm	3 mm	Not Qualified		5 V	AVAILABLE IN TAPE AND REEL	4.2 V	e3				3 mm		6 V
L6728AHTR	STMicroelectronics	SWITCHING CONTROLLER	COMMERCIAL	10	HVSON	SQUARE	YES	660 kHz	PLASTIC/EPOXY			1			NO LEAD	PULSE WIDTH MODULATION				SINGLE	SMALL OUTLINE	SOLCC10,.12,20	Switching Regulator or Controllers	.5 mm	70 Cel		VOLTAGE-MODE	0 Cel	MATTE TIN		DUAL	S-PDSO-N10	1		1 mm	3 mm	Not Qualified				5 V	e3	30		260	3 mm		12 V
L6728AH	STMicroelectronics	SWITCHING CONTROLLER	COMMERCIAL	10	HVSON	SQUARE	YES	660 kHz	PLASTIC/EPOXY			1			NO LEAD	PULSE WIDTH MODULATION				SINGLE	SMALL OUTLINE	SOLCC10,.12,20	Switching Regulator or Controllers	.5 mm	70 Cel		VOLTAGE-MODE	0 Cel	MATTE TIN		DUAL	S-PDSO-N10	1		1 mm	3 mm	Not Qualified				5 V	e3	30		260	3 mm		12 V
ADP1823ACPZ-R7	Analog Devices	DUAL SWITCHING CONTROLLER	INDUSTRIAL	32	HVQCCN	SQUARE	YES	720 kHz	UNSPECIFIED			1			NO LEAD	PULSE WIDTH MODULATION				PHASE-SHIFT	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Switching Regulator or Controllers	.5 mm	85 Cel		VOLTAGE-MODE	-40 Cel	MATTE TIN		QUAD	S-XQCC-N32	3		1 mm	5 mm	Not Qualified		5 V	ALSO OPERATES FROM 5.5V TO 20V SUPPLY USING INTERNAL REGULATOR	3.7 V	e3				5 mm		5.5 V
TPS40130RHBRG4	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	32	HVQCCN	SQUARE	YES	1200 kHz	PLASTIC/EPOXY			1			NO LEAD	PULSE WIDTH MODULATION				PHASE-SHIFT	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Switching Regulator or Controllers	.5 mm	85 Cel		CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N32	2		1 mm	5 mm	Not Qualified		5 V		4.5 V	e4	30		260	5 mm		5.5 V
TPS61012DGSG4	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	10	TSSOP	SQUARE	YES	780 kHz	PLASTIC/EPOXY		1.3 A	1			GULL WING	PULSE WIDTH MODULATION				BOOST	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Switching Regulator or Controllers	.5 mm	85 Cel	1.8 V	CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD SILVER	1.8 V	DUAL	S-PDSO-G10	1		1.1 mm	3 mm	Not Qualified		1.2 V		.8 V	e4	30	1	260	3 mm	1.8 V	1.8 V

Switching Regulators & Controllers

Switching regulators and controllers are electronic devices used to regulate the output voltage and current of power supplies. They operate by rapidly switching a power supply circuit between on and off states, resulting in a high-frequency waveform that can be filtered and smoothed to produce a stable output voltage.

Switching regulators and controllers offer several advantages over traditional linear regulators, including higher efficiency and the ability to handle a wider range of input voltages. They are commonly used in applications such as power supplies for computers, LED lighting, and motor control.

Switching regulators and controllers come in a variety of forms, including step-up (boost), step-down (buck), and step-up/down (buck-boost) configurations. They may be designed as integrated circuits (ICs) or as standalone modules.

Switching regulators and controllers typically include feedback control circuits to adjust the output voltage and current, as well as protection circuits to prevent overvoltage, overcurrent, and overtemperature conditions. They may also include features such as soft-start to reduce inrush currents and synchronization with external clock signals.