INDUSTRIAL Switching Regulators & Controllers 2,228

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Maximum Switching Frequency	Package Body Material	Maximum Supply Current (Isup)	Maximum Output Current	Trim or Adjustable Output (V)	No. of Functions	Technology	Terminal Form	Control Technique	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Switcher Config	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Output Voltage	Control Mode	Minimum Operating Temperature	Terminal Finish	Maximum Output Voltage	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width (mm)	Qualification	Maximum Load Regulation	Minimum Supply Voltage (Vsup)	Nominal Input Voltage	Additional Features	Minimum Input Voltage	Maximum Negative Input Voltage	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	No. of Outputs	Peak Reflow Temperature (C)	Length	Nominal Output Voltage	Maximum Input Voltage
UC2854DWTRG4	Texas Instruments	POWER FACTOR CONTROLLER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	118 kHz	PLASTIC/EPOXY	10 mA	1.5 A		1	BIPOLAR	GULL WING	PULSE WIDTH MODULATION	18 V		BOOST	SMALL OUTLINE	SOP16,.4	Switching Regulator or Controllers	1.27 mm	85 Cel	7.4 V	CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD	7.6 V	DUAL	R-PDSO-G16	2	30 V	2.65 mm	7.49 mm	Not Qualified			18 V		15 V		e4	30		260	10.285 mm	7.5 V	35 V
UC2854BDWG4	Texas Instruments	POWER FACTOR CONTROLLER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	120 kHz	PLASTIC/EPOXY	12 mA	1.5 A		1	BIPOLAR	GULL WING	PULSE WIDTH MODULATION	18 V		BOOST	SMALL OUTLINE	SOP16,.4	Switching Regulator or Controllers	1.27 mm	85 Cel	7.4 V	CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	7.6 V	DUAL	R-PDSO-G16	2	20 V	2.65 mm	7.5 mm	Not Qualified			18 V		10 V		e4	NOT SPECIFIED		260	10.3 mm	7.5 V	20 V
UCC2570DTRG4	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	14	SOP	RECTANGULAR	YES	500 kHz	PLASTIC/EPOXY		1.2 A		1	BICMOS	GULL WING	PULSE WIDTH MODULATION			SINGLE	SMALL OUTLINE	SOP14,.25	Switching Regulator or Controllers	1.27 mm	85 Cel		VOLTAGE-MODE	-40 Cel			DUAL	R-PDSO-G14			1.75 mm	3.9 mm	Not Qualified			11 V	ALSO OPERATES IN CURRENT MODE	10 V			NOT SPECIFIED		NOT SPECIFIED	8.65 mm		13 V
UCC25705PG4	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	8	DIP	RECTANGULAR	NO	4000 kHz	PLASTIC/EPOXY	5 mA	.02 A		1		THROUGH-HOLE	PULSE WIDTH MODULATION	11 V		BUCK-BOOST	IN-LINE	DIP8,.3	Switching Regulator or Controllers	2.54 mm	85 Cel		VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDIP-T8		15 V	5.08 mm	7.62 mm	Not Qualified			11 V		9 V		e4				9.81 mm		15 V
UCC2805DTRG4	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	8	SOP	RECTANGULAR	YES	1000 kHz	PLASTIC/EPOXY	25 mA	1 A		1	BICMOS	GULL WING	PULSE WIDTH MODULATION	10 V		SINGLE	SMALL OUTLINE	SOP8,.25	Switching Regulator or Controllers	1.27 mm	85 Cel		CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G8	1	12 V	1.75 mm	3.9 mm	Not Qualified		4.1 V	10 V		4 V		e4	NOT SPECIFIED		260	4.9 mm		12 V
UCC2806PWTRG4	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	1000 kHz	PLASTIC/EPOXY		.5 A		1	BICMOS	GULL WING	PULSE WIDTH MODULATION			PUSH-PULL	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Switching Regulator or Controllers	.65 mm	85 Cel	5.02 V	CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5.17 V	DUAL	R-PDSO-G16	2	14.5 V	1.2 mm	4.4 mm	Not Qualified		8 V	12 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 2.5V TO 15V	8 V		e4	NOT SPECIFIED		260	5 mm		14.5 V
UCC2808DTR-2G4	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	8	SOP	RECTANGULAR	YES	1000 kHz	PLASTIC/EPOXY	20 mA	1 A		1	BICMOS	GULL WING	PULSE WIDTH MODULATION	10 V		PUSH-PULL	SMALL OUTLINE	SOP8,.25	Switching Regulator or Controllers	1.27 mm	85 Cel		CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G8	1	14 V	1.75 mm	3.9 mm	Not Qualified		5 V	10 V		4.3 V		e4	30		260	4.9 mm		14 V
UCC28083DRG4	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	8	SOP	RECTANGULAR	YES	1000 kHz	PLASTIC/EPOXY		1 A		1	BICMOS	GULL WING	PULSE WIDTH MODULATION			PUSH-PULL	SMALL OUTLINE	SOP8,.25	Switching Regulator or Controllers	1.27 mm	85 Cel		CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G8	1	15 V	1.75 mm	3.9 mm	Not Qualified		12.5 V	10 V		9.3 V		e4	NOT SPECIFIED		260	4.9 mm		15 V
UCC2813DTR-0G4	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	8	SOP	RECTANGULAR	YES	1000 kHz	PLASTIC/EPOXY	30 mA	1 A		1	BICMOS	GULL WING	PULSE WIDTH MODULATION	10 V		SINGLE	SMALL OUTLINE	SOP8,.25	Switching Regulator or Controllers	1.27 mm	85 Cel	4.925 V	CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5.075 V	DUAL	R-PDSO-G8	1	11 V	1.75 mm	3.9 mm	Not Qualified		7.2 V	10 V		7.5 V		e4	NOT SPECIFIED		260	4.9 mm	5 V	11 V
UCC2960PG4	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	8	DIP	RECTANGULAR	NO	360 kHz	PLASTIC/EPOXY		2 A		1	BICMOS	THROUGH-HOLE	PULSE WIDTH MODULATION			SINGLE	IN-LINE	DIP8,.3	Switching Regulator or Controllers	2.54 mm	85 Cel		VOLTAGE-MODE	-40 Cel			DUAL	R-PDIP-T8			5.08 mm	7.62 mm	Not Qualified			12 V		8.5 V			NOT SPECIFIED		NOT SPECIFIED	9.81 mm		16 V
MC33067PG	Onsemi	SWITCHING CONTROLLER	INDUSTRIAL	16	DIP	RECTANGULAR	NO	2200 kHz	PLASTIC/EPOXY		1.5 A		1	BIPOLAR	THROUGH-HOLE	RESONANT CONTROL			PUSH-PULL	IN-LINE	DIP16,.3	Switching Regulator or Controllers	2.54 mm	85 Cel		VOLTAGE-MODE	-40 Cel	MATTE TIN		DUAL	R-PDIP-T16			4.44 mm	7.62 mm	Not Qualified			12 V		10 V		e3				19.175 mm		18 V
NCP1400ASN30T1G	Onsemi	SWITCHING REGULATOR	INDUSTRIAL	5	TSSOP	RECTANGULAR	YES	216 kHz	PLASTIC/EPOXY		.4 A		1		GULL WING	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Switching Regulator or Controllers	.95 mm	85 Cel		VOLTAGE-MODE	-40 Cel	TIN		DUAL	R-PDSO-G5	1		1.1 mm	1.5 mm	Not Qualified			5 V		.95 V		e3	30		260	3 mm		5 V
NCP1402SN30T1G	Onsemi	SWITCHING REGULATOR	INDUSTRIAL	5	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY		.4 A		1	CMOS	GULL WING	PULSE FREQUENCY MODULATION			BOOST	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Switching Regulator or Controllers	.95 mm	85 Cel		VOLTAGE-MODE	-40 Cel	TIN		DUAL	R-PDSO-G5	1		1.1 mm	1.5 mm	Not Qualified			6 V		.95 V		e3	30		260	3 mm		6 V
NCP1403SNT1G	Onsemi	SWITCHING REGULATOR	INDUSTRIAL	5	TSSOP	RECTANGULAR	YES	300 kHz	PLASTIC/EPOXY		.6 A		1		GULL WING	PULSE FREQUENCY MODULATION			BOOST	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Switching Regulator or Controllers	.95 mm	85 Cel		VOLTAGE-MODE	-40 Cel	MATTE TIN		DUAL	R-PDSO-G5	1		1.1 mm	1.5 mm	Not Qualified			3 V		1.2 V		e3	30		260	3 mm		5.5 V
UCC28070DW	Texas Instruments	POWER FACTOR CONTROLLER	INDUSTRIAL	20	SOP	RECTANGULAR	YES	300 kHz	PLASTIC/EPOXY	20 mA	.75 A		1	BICMOS	GULL WING	PULSE WIDTH MODULATION	12 V	12	BOOST	SMALL OUTLINE	SOP20,.4	Switching Regulator or Controllers	1.27 mm	85 Cel		CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G20	1	21 V	2.65 mm	7.5 mm	Not Qualified			12 V		10.5 V		e4	30		260	12.8 mm		21 V
L6920DB	STMicroelectronics	SWITCHING REGULATOR	INDUSTRIAL	8	TSSOP	SQUARE	YES	1000 kHz	PLASTIC/EPOXY		.9 A		1		GULL WING	PULSE FREQUENCY MODULATION			BOOST	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Switching Regulator or Controllers	.65 mm	85 Cel		VOLTAGE-MODE	-40 Cel	Matte Tin (Sn) - annealed		DUAL	S-PDSO-G8	1		1.1 mm	3 mm	Not Qualified			2 V		.8 V		e3	30		260	3 mm		5.5 V
CS51021AEDR16G	Onsemi	SWITCHING CONTROLLER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	1000 kHz	PLASTIC/EPOXY		1 A		1	BIPOLAR	GULL WING	PULSE WIDTH MODULATION			SINGLE	SMALL OUTLINE	SOP16,.25	Switching Regulator or Controllers	1.27 mm	85 Cel		CURRENT-MODE	-40 Cel	MATTE TIN		DUAL	R-PDSO-G16	1		1.75 mm	3.9 mm	Not Qualified			14 V		8.2 V		e3	30		260	9.9 mm		20 V
TPS51116PWPG4	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	20	TSSOP	RECTANGULAR	YES	400 kHz	PLASTIC/EPOXY		6 A		1		GULL WING	PULSE WIDTH MODULATION			PUSH-PULL	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Switching Regulator or Controllers	.65 mm	85 Cel		CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G20	2		1.2 mm	4.4 mm	Not Qualified			5 V		3 V		e4	NOT SPECIFIED		260	6.5 mm		28 V
TPS54010PWPRG4	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	28	HTSSOP	RECTANGULAR	YES	700 kHz	PLASTIC/EPOXY		14 A		1		GULL WING	PULSE WIDTH MODULATION			BUCK	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	.9 V	VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD	2.5 V	DUAL	R-PDSO-G28	2		1.2 mm	4.4 mm	Not Qualified			2.5 V	ALSO REQUIRES 3V TO 4V SUPPLY	2.2 V		e4	30	1	260	9.7 mm		4 V
TPS54312PWPG4	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	20	HTSSOP	RECTANGULAR	YES	700 kHz	PLASTIC/EPOXY		6 A		1		GULL WING	PULSE WIDTH MODULATION			BUCK	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	1.2 V	VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD	1.2 V	DUAL	R-PDSO-G20	2		1.2 mm	4.4 mm	Not Qualified			5 V		3 V		e4	30	1	260	6.5 mm		6 V
TPS54316PWPG4	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	20	HTSSOP	RECTANGULAR	YES	700 kHz	PLASTIC/EPOXY		6 A		1		GULL WING	PULSE WIDTH MODULATION			BUCK	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	3.3 V	VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD	3.3 V	DUAL	R-PDSO-G20	2		1.2 mm	4.4 mm	Not Qualified			5 V		4 V		e4	30	1	260	6.5 mm		6 V
TPS60210DGSRG4	Texas Instruments	SWITCHED CAPACITOR REGULATOR	INDUSTRIAL	10	TSSOP	SQUARE	YES	400 kHz	PLASTIC/EPOXY		.1 A		1		GULL WING				BOOST	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Other Analog ICs	.5 mm	85 Cel	3.3 V		-40 Cel	NICKEL PALLADIUM GOLD	3.3 V	DUAL	S-PDSO-G10	1		1.1 mm	3 mm	Not Qualified			2.4 V		1.8 V		e4	30	1	260	3 mm	3.3 V	3.6 V
TPS61010DRCRG4	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	10	VSON	SQUARE	YES	780 kHz	PLASTIC/EPOXY		1.3 A		1		NO LEAD	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE, VERY THIN PROFILE	SOLCC10,.12,20	Switching Regulator or Controllers	.5 mm	85 Cel		CURRENT-MODE	-40 Cel			DUAL	S-PDSO-N10			1 mm	3 mm	Not Qualified			1.2 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 1.5V TO 3.3V	.8 V			NOT SPECIFIED		NOT SPECIFIED	3 mm		3.3 V
TPS61011DGSG4	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	10	TSSOP	SQUARE	YES	780 kHz	PLASTIC/EPOXY		1.3 A		1		GULL WING	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Switching Regulator or Controllers	.5 mm	85 Cel		CURRENT-MODE	-40 Cel			DUAL	S-PDSO-G10			1.1 mm	3 mm	Not Qualified			1.2 V		.8 V			NOT SPECIFIED		NOT SPECIFIED	3 mm	1.5 V	1.55 V
TPS65105RGERG4	Texas Instruments	SWITCHED CAPACITOR REGULATOR	INDUSTRIAL	24	HVQCCN	SQUARE	YES	2100 kHz	PLASTIC/EPOXY	.9 mA	1.56 A		1	CMOS	NO LEAD	PULSE WIDTH MODULATION	3.3 V	3.3	BOOST	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	Power Management Circuits	.5 mm	85 Cel	5 V	VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD	15 V	QUAD	S-PQCC-N24	2		1 mm	4 mm	Not Qualified			3.3 V		2.7 V	-2 V	e4	30		260	4 mm	10 V	5.8 V
UC28023NG4	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	16	DIP	RECTANGULAR	NO	1000 kHz	PLASTIC/EPOXY		2 A		1		THROUGH-HOLE	PULSE WIDTH MODULATION			PUSH-PULL	IN-LINE	DIP16,.3	Switching Regulator or Controllers	2.54 mm	105 Cel		VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDIP-T16			5.08 mm	7.62 mm	Not Qualified			15 V	CAN ALSO BE CONFIGURED IN PEAK CURRENT OR AVERAGE CURRENT MODE	9 V		e4				19.305 mm		30 V
UCC2813D-0G4	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	8	SOP	RECTANGULAR	YES	52 kHz	PLASTIC/EPOXY	30 mA	1 A		1	BICMOS	GULL WING	PULSE WIDTH MODULATION	10 V		SINGLE	SMALL OUTLINE	SOP8,.25	Switching Regulator or Controllers	1.27 mm	85 Cel	4.925 V	CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5.075 V	DUAL	R-PDSO-G8	1	11 V	1.75 mm	3.9 mm	Not Qualified		7.2 V	10 V		7.5 V		e4	NOT SPECIFIED		260	4.9 mm	5 V	12 V
UCC2813D-2G4	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	8	SOP	RECTANGULAR	YES	1000 kHz	PLASTIC/EPOXY	30 mA	1 A		1	BICMOS	GULL WING	PULSE WIDTH MODULATION	10 V		SINGLE	SMALL OUTLINE	SOP8,.25	Switching Regulator or Controllers	1.27 mm	85 Cel	4.925 V	CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5.075 V	DUAL	R-PDSO-G8	1	11 V	1.75 mm	3.9 mm	Not Qualified		12.5 V	10 V		9.3 V		e4	NOT SPECIFIED		260	4.9 mm	5 V	11 V
UCC2813DTR-3G4	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	8	SOP	RECTANGULAR	YES	36 kHz	PLASTIC/EPOXY	30 mA	1 A		1	BICMOS	GULL WING	PULSE WIDTH MODULATION	10 V		SINGLE	SMALL OUTLINE	SOP8,.25	Switching Regulator or Controllers	1.27 mm	85 Cel	3.94 V	CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	4.06 V	DUAL	R-PDSO-G8	1	11 V	1.75 mm	3.9 mm	Not Qualified		4.1 V	10 V		4 V		e4	NOT SPECIFIED		260	4.9 mm	4 V	12 V
UCC2813PW-3G4	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	8	TSSOP	RECTANGULAR	YES	36 kHz	PLASTIC/EPOXY	30 mA	1 A		1	BICMOS	GULL WING	PULSE WIDTH MODULATION	10 V		SINGLE	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	Switching Regulator or Controllers	.65 mm	85 Cel	3.94 V	CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	4.06 V	DUAL	R-PDSO-G8	2	11 V	1.2 mm	3 mm	Not Qualified		4.1 V	10 V		4 V		e4	NOT SPECIFIED		260	4.4 mm	4 V	12 V
UCC2813PW-5G4	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	8	TSSOP	RECTANGULAR	YES	36 kHz	PLASTIC/EPOXY	30 mA	1 A		1	BICMOS	GULL WING	PULSE WIDTH MODULATION	10 V		SINGLE	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	Switching Regulator or Controllers	.65 mm	85 Cel	3.94 V	CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	4.06 V	DUAL	R-PDSO-G8	2	11 V	1.2 mm	3 mm	Not Qualified		4.1 V	10 V		4 V		e4	NOT SPECIFIED		260	4.4 mm	4 V	12 V
PTN78020AAH	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	7		RECTANGULAR	NO	660 kHz	PLASTIC/EPOXY		4 A		1	HYBRID	PIN/PEG	PULSE WIDTH MODULATION			INVERTER	MICROELECTRONIC ASSEMBLY				85 Cel	-15 V		-40 Cel	MATTE TIN	-3 V	DUAL	R-PDMA-P7			9 mm	22.1 mm	Not Qualified			20 V	OPERATES IN ADJUSTABLE MODE FROM -15V TO -3V OUTPUT	9 V		e3		1		37.97 mm	-5 V	29 V
PTN78020AAST	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	7		RECTANGULAR	NO	660 kHz	PLASTIC/EPOXY		4 A		1	HYBRID	UNSPECIFIED	PULSE WIDTH MODULATION			BUCK-BOOST	MICROELECTRONIC ASSEMBLY				85 Cel			-40 Cel	TIN LEAD		DUAL	R-PDMA-X7	3		9 mm	22.1 mm	Not Qualified			20 V	OPERATES IN ADJUSTABLE MODE FROM -15V TO -3V OUTPUT	9 V		e0				37.97 mm		29 V
PTN78020AAS	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	7		RECTANGULAR	NO	660 kHz	PLASTIC/EPOXY		4 A		1	HYBRID	UNSPECIFIED	PULSE WIDTH MODULATION			INVERTER	MICROELECTRONIC ASSEMBLY				85 Cel	-15 V		-40 Cel	TIN LEAD	-3 V	DUAL	R-PDMA-X7	1		9 mm	22.1 mm	Not Qualified			20 V	OPERATES IN ADJUSTABLE MODE FROM -15V TO -3V OUTPUT	9 V		e0	20	1	235	37.97 mm	-5 V	29 V
PTN78020AAZT	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	7		RECTANGULAR	NO	660 kHz	PLASTIC/EPOXY		4 A		1	HYBRID	UNSPECIFIED	PULSE WIDTH MODULATION			INVERTER	MICROELECTRONIC ASSEMBLY				85 Cel	-15 V		-40 Cel	TIN SILVER COPPER	-3 V	DUAL	R-PDMA-X7	3		9 mm	22.1 mm	Not Qualified			20 V	OPERATES IN ADJUSTABLE MODE FROM -15V TO -3V OUTPUT	9 V		e1	30	1	260	37.97 mm	-5 V	29 V
PTN78020AAZ	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	7		RECTANGULAR	NO	660 kHz	PLASTIC/EPOXY		4 A	YES	1	HYBRID	UNSPECIFIED	PULSE WIDTH MODULATION			INVERTER	MICROELECTRONIC ASSEMBLY				85 Cel	-15 V		-40 Cel	TIN SILVER COPPER	-3 V	DUAL	R-PDMA-X7	3		9 mm	22.1 mm	Not Qualified	25 %		20 V	OPERATES IN ADJUSTABLE MODE FROM -15V TO -3V OUTPUT	9 V		e1	30	1	260	37.97 mm	-5 V	29 V
PTN78020HAH	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	7		RECTANGULAR	NO	660 kHz	PLASTIC/EPOXY		6 A		1	HYBRID	PIN/PEG	PULSE WIDTH MODULATION			BUCK	MICROELECTRONIC ASSEMBLY				85 Cel	11.85 V		-40 Cel	MATTE TIN	22 V	DUAL	R-PDMA-P7			9 mm	22.1 mm	Not Qualified			20 V	OPERATES IN ADJUSTABLE MODE FROM 11.85V TO 22V	15 V		e3		1		37.97 mm	5 V	36 V
PTN78020HAS	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	7		RECTANGULAR	NO	660 kHz	PLASTIC/EPOXY		6 A		1	HYBRID	UNSPECIFIED	PULSE WIDTH MODULATION			BUCK	MICROELECTRONIC ASSEMBLY				85 Cel	11.85 V		-40 Cel	TIN LEAD	22 V	DUAL	R-PDMA-X7	1		9 mm	22.1 mm	Not Qualified			20 V	OPERATES IN ADJUSTABLE MODE FROM 11.85V TO 22V	15 V		e0	20	1	235	37.97 mm	5 V	36 V
PTN78020HAZ	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	7		RECTANGULAR	NO	660 kHz	PLASTIC/EPOXY		6 A		1	HYBRID	UNSPECIFIED	PULSE WIDTH MODULATION			BUCK	MICROELECTRONIC ASSEMBLY				85 Cel	11.85 V		-40 Cel	TIN SILVER COPPER	22 V	DUAL	R-PDMA-X7	3		9 mm	22.1 mm	Not Qualified			20 V	OPERATES IN ADJUSTABLE MODE FROM 11.85V TO 22V	15 V		e1	30	1	260	37.97 mm	5 V	36 V
PTN78020WAZT	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	7		RECTANGULAR	NO	660 kHz	PLASTIC/EPOXY		6 A		1	HYBRID	UNSPECIFIED	PULSE WIDTH MODULATION			BUCK	MICROELECTRONIC ASSEMBLY				85 Cel	2.5 V		-40 Cel	TIN SILVER COPPER	12.6 V	DUAL	R-PDMA-X7	3		9 mm	22.1 mm	Not Qualified			20 V	OPERATES IN ADJUSTABLE MODE FROM 2.5V TO 12.6V	7 V		e1	30	1	260	37.97 mm	24 V	36 V
PTN78020WAZ	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	7		RECTANGULAR	NO	660 kHz	PLASTIC/EPOXY		6 A		1	HYBRID	UNSPECIFIED	PULSE WIDTH MODULATION			BUCK	MICROELECTRONIC ASSEMBLY				85 Cel	2.5 V		-40 Cel	TIN SILVER COPPER	12.6 V	DUAL	R-PDMA-X7	3		9 mm	22.1 mm	Not Qualified			20 V	OPERATES IN ADJUSTABLE MODE FROM 2.5V TO 12.6V	7 V		e1	30	1	260	37.97 mm	24 V	36 V
CS2841BEBN8	Onsemi	SWITCHING CONTROLLER	INDUSTRIAL	8	DIP	RECTANGULAR	NO	60 kHz	PLASTIC/EPOXY		1 A		1		THROUGH-HOLE	PULSE WIDTH MODULATION			SINGLE	IN-LINE	DIP8,.3	Switching Regulator or Controllers	2.54 mm	85 Cel		CURRENT-MODE	-40 Cel	TIN LEAD		DUAL	R-PDIP-T8			4.45 mm	7.62 mm	Not Qualified			15 V		8.4 V		e0			235	9.78 mm		16 V
CS2841BEDR14G	Onsemi	SWITCHING CONTROLLER	INDUSTRIAL	14	SOP	RECTANGULAR	YES	60 kHz	PLASTIC/EPOXY		1 A		1	BIPOLAR	GULL WING	PULSE WIDTH MODULATION			SINGLE	SMALL OUTLINE	SOP14,.25	Switching Regulator or Controllers	1.27 mm	85 Cel		CURRENT-MODE	-40 Cel	TIN		DUAL	R-PDSO-G14			1.75 mm	3.9 mm	Not Qualified			15 V		8.4 V		e3			260	8.65 mm		16 V
CS5124XD8G	Onsemi	SWITCHING CONTROLLER	INDUSTRIAL	8	SOP	RECTANGULAR	YES	440 kHz	PLASTIC/EPOXY		1.5 A		1	BICMOS	GULL WING	PULSE WIDTH MODULATION			SINGLE	SMALL OUTLINE	SOP8,.25	Switching Regulator or Controllers	1.27 mm	105 Cel		CURRENT-MODE	-40 Cel	MATTE TIN		DUAL	R-PDSO-G8	1		1.75 mm	3.9 mm	Not Qualified			12 V		7.6 V		e3	30		260	4.9 mm		20 V
TPS53124PWR	Texas Instruments	DUAL SWITCHING CONTROLLER	INDUSTRIAL	28	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY				1		GULL WING	PULSE WIDTH MODULATION			PUSH-PULL	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	Switching Regulator or Controllers	.65 mm	85 Cel		VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G28	1		1.2 mm	4.4 mm	Not Qualified			12 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 0.76V TO 5.5V	4.5 V		e4	30		260	9.7 mm	5 V	24 V
TPS53124PW	Texas Instruments	DUAL SWITCHING CONTROLLER	INDUSTRIAL	28	TSSOP	RECTANGULAR	YES	350 kHz	PLASTIC/EPOXY		15 A		1		GULL WING	PULSE WIDTH MODULATION			PUSH-PULL	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	.76 V		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5.5 V	DUAL	R-PDSO-G28	1		1.2 mm	4.4 mm	Not Qualified			12 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 0.76V TO 5.5V	4.5 V		e4	NOT SPECIFIED	2	260	9.7 mm	5 V	24 V
ADM8830ARUZ	Analog Devices	SWITCHED CAPACITOR REGULATOR	INDUSTRIAL	20	TSSOP	RECTANGULAR	YES	140 kHz	PLASTIC/EPOXY				1	CMOS	GULL WING				TRIPLER	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-G20	1		1.2 mm	4.4 mm	Not Qualified			3 V		2.6 V		e3			260	6.5 mm		3.6 V
ADM8660ANZ	Analog Devices	SWITCHED CAPACITOR CONVERTER	INDUSTRIAL	8	DIP	RECTANGULAR	NO	120 kHz	PLASTIC/EPOXY	4.5 mA			1	CMOS	THROUGH-HOLE				DOUBLER INVERTER	IN-LINE			2.54 mm	85 Cel		VOLTAGE-MODE	-40 Cel	MATTE TIN		DUAL	R-PDIP-T8			5.33 mm	7.62 mm	Not Qualified			5 V		1.5 V		e3				9.27 mm		7 V

Switching Regulators & Controllers

Switching regulators and controllers are electronic devices used to regulate the output voltage and current of power supplies. They operate by rapidly switching a power supply circuit between on and off states, resulting in a high-frequency waveform that can be filtered and smoothed to produce a stable output voltage.

Switching regulators and controllers offer several advantages over traditional linear regulators, including higher efficiency and the ability to handle a wider range of input voltages. They are commonly used in applications such as power supplies for computers, LED lighting, and motor control.

Switching regulators and controllers come in a variety of forms, including step-up (boost), step-down (buck), and step-up/down (buck-boost) configurations. They may be designed as integrated circuits (ICs) or as standalone modules.

Switching regulators and controllers typically include feedback control circuits to adjust the output voltage and current, as well as protection circuits to prevent overvoltage, overcurrent, and overtemperature conditions. They may also include features such as soft-start to reduce inrush currents and synchronization with external clock signals.