Texas Instruments Switching Regulators & Controllers 2,398

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Maximum Switching Frequency	Package Body Material	Maximum Supply Current (Isup)	Maximum Output Current	No. of Functions	Technology	Screening Level	Terminal Form	Control Technique	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Switcher Config	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Output Voltage	Control Mode	Minimum Operating Temperature	Terminal Finish	Maximum Output Voltage	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width (mm)	Qualification	Minimum Supply Voltage (Vsup)	Nominal Input Voltage	Additional Features	Minimum Input Voltage	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	No. of Outputs	Peak Reflow Temperature (C)	Length	Nominal Output Voltage	Maximum Input Voltage
TL1451AQD	Texas Instruments	DUAL SWITCHING CONTROLLER	AUTOMOTIVE	16	SOP	RECTANGULAR	YES	500 kHz	PLASTIC/EPOXY	2.4 mA	.021 A	1	CMOS		GULL WING	PULSE WIDTH MODULATION	6 V		BUCK-BOOST	SMALL OUTLINE	SOP16,.25	Switching Regulator or Controllers	1.27 mm	125 Cel	1 V	VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD	50 V	DUAL	R-PDSO-G16	1		1.75 mm	3.9 mm	Not Qualified		6 V		3.6 V	e4	30	2	260	9.9 mm	2.5 V	50 V
TPS60120PWP	Texas Instruments	SWITCHED CAPACITOR REGULATOR	INDUSTRIAL	20	HTSSOP	RECTANGULAR	YES	450 kHz	PLASTIC/EPOXY		.2 A	1			GULL WING				DOUBLER INVERTER	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Other Analog ICs	.65 mm	85 Cel	3.3 V	CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	3.3 V	DUAL	R-PDSO-G20	2		1.2 mm	4.4 mm	Not Qualified		2 V		1.8 V	e4	NOT SPECIFIED	1	260	6.5 mm	3.3 V	3.6 V
TPS60131PWP	Texas Instruments	SWITCHED CAPACITOR REGULATOR	INDUSTRIAL	20	HTSSOP	RECTANGULAR	YES	450 kHz	PLASTIC/EPOXY		.3 A	1			GULL WING				DOUBLER INVERTER	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Other Analog ICs	.65 mm	85 Cel	5 V		-40 Cel	NICKEL PALLADIUM GOLD	5 V	DUAL	R-PDSO-G20	2		1.2 mm	4.4 mm	Not Qualified		3 V		2.7 V	e4	30	1	260	6.5 mm	5 V	5.4 V
TPS544B20RVFT	Texas Instruments	SWITCHING REGULATOR	AUTOMOTIVE	40	HQCCN	RECTANGULAR	YES	1000 kHz	PLASTIC/EPOXY		20 A	1			NO LEAD				BUCK	CHIP CARRIER, HEAT SINK/SLUG			.5 mm	125 Cel	.6 V		-40 Cel	NICKEL PALLADIUM GOLD	5.5 V	QUAD	R-PQCC-N40	2		1.52 mm	5 mm			12 V	REGULATING NOMINAL VOLTAGE OF 6.5V ALSO AVAILABLE; OUTPUT VOLTAGE RANGE IS 0.6V TO 5.5V	4.5 V	e4	30	1	260	7 mm	3.3 V	18 V
TPS62150AQRGTTQ1	Texas Instruments	SWITCHING REGULATOR	AUTOMOTIVE	16	HVQCCN	SQUARE	YES	2500 kHz	PLASTIC/EPOXY		1 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	125 Cel	.9 V		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	6.3 V	QUAD	S-PQCC-N16	2		1 mm	3 mm			12 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 0.9 TO 6V	3 V	e4	NOT SPECIFIED	1	260	3 mm		17 V
TPS62153AQRGTRQ1	Texas Instruments	SWITCHING REGULATOR	AUTOMOTIVE	16	HVQCCN	SQUARE	YES	2500 kHz	PLASTIC/EPOXY		1 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	125 Cel	5 V		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5 V	QUAD	S-PQCC-N16	2		1 mm	3 mm			12 V		3 V	e4	NOT SPECIFIED	1	260	3 mm	5 V	17 V
TPS56300PWPR	Texas Instruments	DUAL SWITCHING CONTROLLER	AUTOMOTIVE	28	HTSSOP	RECTANGULAR	YES	400 kHz	PLASTIC/EPOXY		2 A	1	CMOS		GULL WING	HYSTERETIC CURRENT MODE			PUSH-PULL	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	Switching Regulator or Controllers	.65 mm	125 Cel		CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G28	2		1.2 mm	4.4 mm	Not Qualified		3.3 V		2.8 V	e4	30		260	9.7 mm		5.5 V
TPS61280AYFFT	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	16	VFBGA	SQUARE	YES	2300 kHz	UNSPECIFIED			1			BALL	PULSE WIDTH MODULATION			BOOST	GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.4 mm	85 Cel	2.85 V	CURRENT-MODE	-40 Cel	TIN SILVER COPPER	4.4 V	BOTTOM	S-XBGA-B16	1		.625 mm	1.666 mm			3.2 V	ALSO OPERATES IN PFM CONTROL TECHNIQUE	2.3 V	e1	30	1	260	1.666 mm	3.4 V	4.85 V
TPS61282AYFFR	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	16	VFBGA	SQUARE	YES	2300 kHz	UNSPECIFIED			1			BALL	PULSE WIDTH MODULATION			BOOST	GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.4 mm	85 Cel	2.85 V	CURRENT-MODE	-40 Cel	TIN SILVER COPPER	4.4 V	BOTTOM	S-XBGA-B16	1		.625 mm	1.666 mm			3.2 V	ALSO OPERATES IN PFM CONTROL TECHNIQUE	2.3 V	e1	30	1	260	1.666 mm	3.4 V	4.85 V
UCC2960D	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	8	SOP	RECTANGULAR	YES	400 kHz	PLASTIC/EPOXY		2 A	1	BICMOS		GULL WING	PULSE WIDTH MODULATION			BUCK-BOOST	SMALL OUTLINE	SOP8,.25	Switching Regulator or Controllers	1.27 mm	85 Cel		CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G8	2	19 V	1.75 mm	3.9 mm	Not Qualified	16 V	12 V		8.5 V	e4	30		260	4.9 mm		19 V
TPS65980RHFT	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	24	HVQCCN	RECTANGULAR	YES		PLASTIC/EPOXY		3.5 A	1			NO LEAD				BUCK-BOOST	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		QUAD	R-PQCC-N24	2		1 mm	4 mm			12 V		2.5 V	e4	NOT SPECIFIED	3	260	5 mm	3.3 V	15.75 V
TL2842DR-8	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	8	SOP	RECTANGULAR	YES	500 kHz	PLASTIC/EPOXY	30 mA	1 A	1	BIPOLAR		GULL WING	PULSE WIDTH MODULATION	15 V		BUCK-BOOST	SMALL OUTLINE	SOP8,.25	Switching Regulator or Controllers	1.27 mm	85 Cel	4.95 V	CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5.05 V	DUAL	R-PDSO-G8	2	30 V	1.75 mm	3.9 mm	Not Qualified		15 V		12 V	e4	NOT SPECIFIED		260	4.9 mm	5 V	30 V
TL3842P	Texas Instruments	SWITCHING REGULATOR	COMMERCIAL	8	DIP	RECTANGULAR	NO	500 kHz	PLASTIC/EPOXY	30 mA	1 A	1	BIPOLAR		THROUGH-HOLE	PULSE WIDTH MODULATION	15 V		BUCK-BOOST	IN-LINE	DIP8,.3	Switching Regulator or Controllers	2.54 mm	70 Cel	4.9 V	CURRENT-MODE	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5.1 V	DUAL	R-PDIP-T8		30 V	5.08 mm	7.62 mm	Not Qualified		15 V		12 V	e4	NOT SPECIFIED		NOT SPECIFIED	9.81 mm	5 V	30 V
TL3843D-8	Texas Instruments	SWITCHING REGULATOR	COMMERCIAL	8	SOP	RECTANGULAR	YES	500 kHz	PLASTIC/EPOXY	30 mA	1 A	1	BIPOLAR		GULL WING	PULSE WIDTH MODULATION	15 V		SINGLE	SMALL OUTLINE	SOP8,.25	Switching Regulator or Controllers	1.27 mm	70 Cel	4.9 V	CURRENT-MODE	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5.1 V	DUAL	R-PDSO-G8	1	30 V	1.75 mm	3.9 mm	Not Qualified		15 V		12 V	e4	NOT SPECIFIED		260	4.9 mm	5 V	30 V
TL3845DR	Texas Instruments	SWITCHING REGULATOR	COMMERCIAL	14	SOP	RECTANGULAR	YES	500 kHz	PLASTIC/EPOXY	30 mA	1 A	1	BIPOLAR		GULL WING	PULSE WIDTH MODULATION	15 V		SINGLE	SMALL OUTLINE	SOP14,.25	Switching Regulator or Controllers	1.27 mm	70 Cel	4.9 V	CURRENT-MODE	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5.1 V	DUAL	R-PDSO-G14	1	30 V	1.75 mm	3.9 mm	Not Qualified		15 V		12 V	e4	NOT SPECIFIED		260	8.65 mm	5 V	30 V
TPS61002DGSR	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	10	TSSOP	SQUARE	YES	840 kHz	PLASTIC/EPOXY		1.3 A	1			GULL WING	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Switching Regulator or Controllers	.5 mm	85 Cel	1.8 V	CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD	1.8 V	DUAL	S-PDSO-G10	1		1.1 mm	3 mm	Not Qualified		1.2 V		.8 V	e4	30	1	260	3 mm	1.8 V	1.8 V
TPS61005DGSR	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	10	TSSOP	SQUARE	YES	840 kHz	PLASTIC/EPOXY		1.3 A	1			GULL WING	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Switching Regulator or Controllers	.5 mm	85 Cel	3 V	CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD	3 V	DUAL	S-PDSO-G10	1		1.1 mm	3 mm	Not Qualified		1.2 V		.8 V	e4	30	1	260	3 mm	3 V	3 V
TPS61006DGS	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	10	TSSOP	SQUARE	YES	840 kHz	PLASTIC/EPOXY		1.3 A	1			GULL WING	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Switching Regulator or Controllers	.5 mm	85 Cel	3.3 V	CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD	3.3 V	DUAL	S-PDSO-G10	1		1.1 mm	3 mm	Not Qualified		1.2 V		.8 V	e4	30	1	260	3 mm	3.3 V	3.3 V
TPS60200DGS	Texas Instruments	SWITCHED CAPACITOR REGULATOR	INDUSTRIAL	10	TSSOP	SQUARE	YES	400 kHz	PLASTIC/EPOXY		.1 A	1			GULL WING				DOUBLER INVERTER	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Other Analog ICs	.5 mm	85 Cel	3.3 V		-40 Cel	NICKEL PALLADIUM GOLD SILVER	3.3 V	DUAL	S-PDSO-G10	1		1.07 mm	3 mm	Not Qualified		2.4 V		1.8 V	e4	30	1	260	3 mm	3.3 V	3.6 V
TPS60201DGS	Texas Instruments	SWITCHED CAPACITOR REGULATOR	INDUSTRIAL	10	TSSOP	SQUARE	YES	400 kHz	PLASTIC/EPOXY		.1 A	1			GULL WING				DOUBLER INVERTER	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Other Analog ICs	.5 mm	85 Cel	3.3 V		-40 Cel	NICKEL PALLADIUM GOLD	3.3 V	DUAL	S-PDSO-G10	1		1.07 mm	3 mm	Not Qualified		2.4 V		1.8 V	e4	30	1	260	3 mm	3.3 V	3.6 V
TPS60202DGS	Texas Instruments	SWITCHED CAPACITOR REGULATOR	INDUSTRIAL	10	TSSOP	SQUARE	YES	400 kHz	PLASTIC/EPOXY		.05 A	1			GULL WING				DOUBLER INVERTER	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Other Analog ICs	.5 mm	85 Cel	3.3 V		-40 Cel	NICKEL PALLADIUM GOLD	3.3 V	DUAL	S-PDSO-G10	1		1.07 mm	3 mm	Not Qualified		2.4 V		1.8 V	e4	30	1	260	3 mm	3.3 V	3.6 V
TL497ACNS	Texas Instruments	SWITCHING REGULATOR	COMMERCIAL	14	SOP	RECTANGULAR	YES	50 kHz	PLASTIC/EPOXY		.5 A	1			GULL WING	PULSE FREQUENCY MODULATION			SINGLE	SMALL OUTLINE			1.27 mm	70 Cel		VOLTAGE-MODE	0 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G14	1		2 mm	5.3 mm	Not Qualified		6 V		4.5 V	e4	30		260	10.2 mm		12 V
PT6931A	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	23		RECTANGULAR	NO	725 kHz	UNSPECIFIED		6 A	1	HYBRID		THROUGH-HOLE				SINGLE	MICROELECTRONIC ASSEMBLY	SIP23H,1.0	Switching Regulator or Controllers	2.54 mm	85 Cel		VOLTAGE-MODE	-40 Cel			SINGLE	R-XSMA-T23					Not Qualified		5 V		4.5 V		NOT SPECIFIED		NOT SPECIFIED			5.5 V
PT6932A	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	23		RECTANGULAR	NO	725 kHz	UNSPECIFIED		6 A	1	HYBRID		THROUGH-HOLE				SINGLE	MICROELECTRONIC ASSEMBLY	SIP23H,1.0	Switching Regulator or Controllers	2.54 mm	85 Cel		VOLTAGE-MODE	-40 Cel			SINGLE	R-XSMA-T23					Not Qualified		5 V		4.5 V		NOT SPECIFIED		NOT SPECIFIED			5.5 V
PT6932C	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	23		RECTANGULAR	YES	725 kHz	UNSPECIFIED		6 A	1	HYBRID		GULL WING				SINGLE	MICROELECTRONIC ASSEMBLY	SMSIP23H,1.0	Switching Regulator or Controllers	2.54 mm	85 Cel		VOLTAGE-MODE	-40 Cel			SINGLE	R-XSMA-G23	3				Not Qualified		5 V		4.5 V				215			5.5 V
SG3524NS	Texas Instruments	SWITCHING CONTROLLER	COMMERCIAL	16	SOP	RECTANGULAR	YES	450 kHz	PLASTIC/EPOXY		.1 A	1	BIPOLAR		GULL WING	PULSE WIDTH MODULATION			PUSH-PULL	SMALL OUTLINE	SOP16,.3	Switching Regulator or Controllers	1.27 mm	70 Cel		VOLTAGE-MODE	0 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G16	1		2 mm	5.3 mm	Not Qualified		20 V		8 V	e4	30		260	10.2 mm		40 V
TL1451AMFKB	Texas Instruments	DUAL SWITCHING CONTROLLER	MILITARY	20	QCCN	SQUARE	YES	500 kHz	CERAMIC, METAL-SEALED COFIRED		.021 A	1	CMOS	MIL-STD-883	NO LEAD	PULSE WIDTH MODULATION			PHASE-SHIFT	CHIP CARRIER			1.27 mm	125 Cel		VOLTAGE-MODE	-55 Cel			QUAD	S-CQCC-N20			2.03 mm	8.89 mm	Not Qualified		6 V		3.6 V					8.89 mm	2.5 V	50 V
TPS56100PWPR	Texas Instruments	SWITCHING CONTROLLER	OTHER	28	HTSSOP	RECTANGULAR	YES	500 kHz	PLASTIC/EPOXY		1.4 A	1			GULL WING	HYSTERETIC CURRENT MODE			PUSH-PULL	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	Switching Regulator or Controllers	.65 mm	125 Cel		CURRENT-MODE	0 Cel			DUAL	R-PDSO-G28			1.2 mm	4.4 mm	Not Qualified		5 V		4.5 V		NOT SPECIFIED		NOT SPECIFIED	9.7 mm		6 V
TPS56100PWP	Texas Instruments	SWITCHING CONTROLLER	COMMERCIAL	28	HTSSOP	RECTANGULAR	YES	500 kHz	PLASTIC/EPOXY		1.4 A	1			GULL WING	HYSTERETIC CURRENT MODE			PUSH-PULL	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH			.65 mm	70 Cel	1.3 V	CURRENT-MODE	0 Cel	NICKEL PALLADIUM GOLD	2.6 V	DUAL	R-PDSO-G28	2		1.2 mm	4.4 mm	Not Qualified		5 V		4.5 V	e4	30	1	260	9.7 mm		5.5 V
UCC2305TDWRQ1	Texas Instruments	FLUORESCENT LIGHT CONTROLLER	INDUSTRIAL	28	SOP	RECTANGULAR	YES	120 kHz	PLASTIC/EPOXY		.01 A	1		AEC-Q100	GULL WING	PULSE WIDTH MODULATION	6.6 V	6.6	SINGLE	SMALL OUTLINE	SOP28,.4	Switching Regulator or Controllers	1.27 mm	105 Cel		CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G28	2	12 V	2.65 mm	7.5 mm	Not Qualified	8 V	6.6 V		5 V	e4	30		260	17.9 mm		18 V
TL1453CNSR	Texas Instruments	DUAL SWITCHING CONTROLLER	OTHER	16	SOP	RECTANGULAR	YES	500 kHz	PLASTIC/EPOXY		.021 A	1	BIPOLAR		GULL WING	PULSE WIDTH MODULATION			BUCK-BOOST	SMALL OUTLINE	SOP16,.25	Switching Regulator or Controllers	1.27 mm	85 Cel	2.5 V	VOLTAGE-MODE	-20 Cel	NICKEL PALLADIUM GOLD	50 V	DUAL	R-PDSO-G16	1		2 mm	5.3 mm	Not Qualified		6 V		3.6 V	e4	30	2	260	10.2 mm		40 V
TL5001AMFKB	Texas Instruments	SWITCHING CONTROLLER	MILITARY	20	QCCN	SQUARE	YES	500 kHz	CERAMIC, METAL-SEALED COFIRED	2.1 mA	.1 A	1	BIPOLAR		NO LEAD	PULSE WIDTH MODULATION	6 V		BUCK-BOOST	CHIP CARRIER	LCC20,.35SQ	Switching Regulator or Controllers	1.27 mm	125 Cel	1 V	VOLTAGE-MODE	-55 Cel	TIN LEAD	50 V	QUAD	S-CQCC-N20			2.03 mm	8.89 mm	Not Qualified		6 V		3.6 V	e0		1		8.89 mm	1 V	40 V
TL5001AMJGB	Texas Instruments	SWITCHING CONTROLLER	MILITARY	8	DIP	RECTANGULAR	NO	500 kHz	CERAMIC, GLASS-SEALED	2.1 mA	.1 A	1	BIPOLAR		THROUGH-HOLE	PULSE WIDTH MODULATION	6 V		BUCK-BOOST	IN-LINE	DIP8,.3	Switching Regulator or Controllers	2.54 mm	125 Cel	1 V	VOLTAGE-MODE	-55 Cel	Tin/Lead (Sn/Pb)	50 V	DUAL	R-GDIP-T8			5.08 mm	7.62 mm	Not Qualified		6 V		3.6 V	e0	NOT SPECIFIED	1	NOT SPECIFIED	9.58 mm	1 V	40 V
TL5001CPSR	Texas Instruments	SWITCHING CONTROLLER	OTHER	8	SOP	RECTANGULAR	YES	400 kHz	PLASTIC/EPOXY		.1 A	1			GULL WING	PULSE WIDTH MODULATION			BUCK-BOOST	SMALL OUTLINE			1.27 mm	85 Cel	1 V	VOLTAGE-MODE	-25 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	50 V	DUAL	R-PDSO-G8	1		2 mm	5.3 mm	Not Qualified		6 V		3.6 V	e4	NOT SPECIFIED	1	260	6.2 mm		40 V
TL5001MJGB	Texas Instruments	SWITCHING CONTROLLER	MILITARY	8	DIP	RECTANGULAR	NO	400 kHz	CERAMIC, GLASS-SEALED		.1 A	1			THROUGH-HOLE	PULSE WIDTH MODULATION			BUCK-BOOST	IN-LINE			2.54 mm	125 Cel	1 V	VOLTAGE-MODE	-55 Cel	Tin/Lead (Sn/Pb)	50 V	DUAL	R-GDIP-T8			5.08 mm	7.62 mm	Not Qualified		6 V		3.6 V	e0	NOT SPECIFIED	1	NOT SPECIFIED	9.58 mm		40 V
UCC3803PWTR	Texas Instruments	SWITCHING CONTROLLER	COMMERCIAL	8	TSSOP	RECTANGULAR	YES	1000 kHz	PLASTIC/EPOXY	25 mA	1 A	1	BICMOS		GULL WING	PULSE WIDTH MODULATION	10 V		BUCK-BOOST	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	Switching Regulator or Controllers	.65 mm	70 Cel		CURRENT-MODE	0 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G8	2	12 V	1.2 mm	3 mm	Not Qualified	0 V	10 V		4 V	e4	30		260	4.4 mm		12 V
TL594IPW	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	300 kHz	PLASTIC/EPOXY		.25 A	1	BIPOLAR		GULL WING	PULSE WIDTH MODULATION			PUSH-PULL	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Switching Regulator or Controllers	.65 mm	85 Cel		VOLTAGE-MODE	-40 Cel			DUAL	R-PDSO-G16			1.2 mm	4.4 mm	Not Qualified		15 V		7 V		NOT SPECIFIED		NOT SPECIFIED	5 mm		40 V
UCC2817DTR	Texas Instruments	POWER FACTOR CONTROLLER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	120 kHz	PLASTIC/EPOXY	4 mA	1.2 A	1	BICMOS		GULL WING	PULSE WIDTH MODULATION	12 V		BOOST	SMALL OUTLINE	SOP16,.25	Switching Regulator or Controllers	1.27 mm	85 Cel		CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G16	1	18 V	1.75 mm	3.9 mm	Not Qualified		12 V		10.3 V	e4	30		260	9.9 mm		18 V
UCC2818DWTR	Texas Instruments	POWER FACTOR CONTROLLER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	120 kHz	PLASTIC/EPOXY	4 mA	1.2 A	1	BICMOS		GULL WING	PULSE WIDTH MODULATION	12 V		BOOST	SMALL OUTLINE	SOP16,.4	Switching Regulator or Controllers	1.27 mm	85 Cel		CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G16	2	18 V	2.65 mm	7.5 mm	Not Qualified		12 V		10.3 V	e4	NOT SPECIFIED		260	10.3 mm		18 V
UCC3817DTR	Texas Instruments	POWER FACTOR CONTROLLER	COMMERCIAL	16	SOP	RECTANGULAR	YES	120 kHz	PLASTIC/EPOXY	4 mA	1.2 A	1	BICMOS		GULL WING	PULSE WIDTH MODULATION	12 V		BOOST	SMALL OUTLINE	SOP16,.25	Switching Regulator or Controllers	1.27 mm	70 Cel		CURRENT-MODE	0 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G16	1	18 V	1.75 mm	3.9 mm	Not Qualified		12 V		10.3 V	e4	30		260	9.9 mm		18 V
UCC3817DWTR	Texas Instruments	POWER FACTOR CONTROLLER	COMMERCIAL	16	SOP	RECTANGULAR	YES	120 kHz	PLASTIC/EPOXY	4 mA	1.2 A	1	BICMOS		GULL WING	PULSE WIDTH MODULATION	12 V		BOOST	SMALL OUTLINE	SOP16,.4	Switching Regulator or Controllers	1.27 mm	70 Cel		CURRENT-MODE	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G16	2	18 V	2.65 mm	7.5 mm	Not Qualified		12 V		10.3 V	e4	NOT SPECIFIED		260	10.3 mm		18 V
UCC39412PWTR	Texas Instruments	SWITCHING REGULATOR	COMMERCIAL	8	TSSOP	RECTANGULAR	YES	500 kHz	PLASTIC/EPOXY		.715 A	1	CMOS		GULL WING				BOOST	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	Switching Regulator or Controllers	.65 mm	70 Cel		CURRENT-MODE	0 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G8	2		1.2 mm	3 mm	Not Qualified		1.25 V		1.1 V	e4	30		260	4.4 mm		3.2 V
UC2874QTR-2	Texas Instruments	SWITCHING CONTROLLER	OTHER	20	QCCJ	SQUARE	YES	300 kHz	PLASTIC/EPOXY		1 A	1	BIPOLAR		J BEND	PULSE WIDTH MODULATION			PUSH-PULL	CHIP CARRIER	LDCC20,.4SQ	Switching Regulator or Controllers	1.27 mm	85 Cel		CURRENT-MODE	-25 Cel			QUAD	S-PQCC-J20			4.57 mm	8.965 mm	Not Qualified		12 V		12 V		NOT SPECIFIED		NOT SPECIFIED	8.965 mm		24 V
UCC2800PWTR	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	8	TSSOP	RECTANGULAR	YES	1000 kHz	PLASTIC/EPOXY		1 A	1	BICMOS		GULL WING	PULSE WIDTH MODULATION			SINGLE	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	Switching Regulator or Controllers	.65 mm	85 Cel		CURRENT-MODE	-40 Cel			DUAL	R-PDSO-G8			1.2 mm	3 mm	Not Qualified		10 V		7.5 V		NOT SPECIFIED		NOT SPECIFIED	4.4 mm		12 V
UCC28500DWTR	Texas Instruments	POWER FACTOR CONTROLLER WITH POST REGULATOR	INDUSTRIAL	20	SOP	RECTANGULAR	YES	200 kHz	PLASTIC/EPOXY		1.2 A	1	BICMOS		GULL WING	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE	SOP20,.4	Switching Regulator or Controllers	1.27 mm	85 Cel		CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G20	2	18 V	2.65 mm	7.5 mm	Not Qualified		12 V	CAN ALSO BE PROGRAMMED FOR CURRENT MODE AND VOLTAGE MODE	10.3 V	e4	30		260	12.8 mm		18 V
UCC28501DWTR	Texas Instruments	POWER FACTOR CONTROLLER WITH POST REGULATOR	INDUSTRIAL	20	SOP	RECTANGULAR	YES	120 kHz	PLASTIC/EPOXY		1.2 A	1	BICMOS		GULL WING	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE	SOP20,.4	Switching Regulator or Controllers	1.27 mm	85 Cel		CURRENT-MODE	-40 Cel			DUAL	R-PDSO-G20			2.65 mm	7.5 mm	Not Qualified		12 V	CAN ALSO BE PROGRAMMED FOR CURRENT MODE AND VOLTAGE MODE	10.3 V		NOT SPECIFIED		NOT SPECIFIED	12.8 mm		15 V
UCC28502DWTR	Texas Instruments	POWER FACTOR CONTROLLER WITH POST REGULATOR	INDUSTRIAL	20	SOP	RECTANGULAR	YES	120 kHz	PLASTIC/EPOXY		1.2 A	1	BICMOS		GULL WING	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE	SOP20,.4	Switching Regulator or Controllers	1.27 mm	85 Cel		CURRENT-MODE	-40 Cel			DUAL	R-PDSO-G20			2.65 mm	7.5 mm	Not Qualified		12 V	CAN ALSO BE PROGRAMMED FOR CURRENT MODE AND VOLTAGE MODE	10.3 V		NOT SPECIFIED		NOT SPECIFIED	12.8 mm		15 V
UCC28503DWTR	Texas Instruments	POWER FACTOR CONTROLLER WITH POST REGULATOR	INDUSTRIAL	20	SOP	RECTANGULAR	YES	120 kHz	PLASTIC/EPOXY		1.2 A	1	BICMOS		GULL WING	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE	SOP20,.4	Switching Regulator or Controllers	1.27 mm	85 Cel		CURRENT-MODE	-40 Cel			DUAL	R-PDSO-G20			2.65 mm	7.5 mm	Not Qualified		12 V	CAN ALSO BE PROGRAMMED FOR CURRENT MODE AND VOLTAGE MODE	10.3 V		NOT SPECIFIED		NOT SPECIFIED	12.8 mm		15 V

Switching Regulators & Controllers

Switching regulators and controllers are electronic devices used to regulate the output voltage and current of power supplies. They operate by rapidly switching a power supply circuit between on and off states, resulting in a high-frequency waveform that can be filtered and smoothed to produce a stable output voltage.

Switching regulators and controllers offer several advantages over traditional linear regulators, including higher efficiency and the ability to handle a wider range of input voltages. They are commonly used in applications such as power supplies for computers, LED lighting, and motor control.

Switching regulators and controllers come in a variety of forms, including step-up (boost), step-down (buck), and step-up/down (buck-boost) configurations. They may be designed as integrated circuits (ICs) or as standalone modules.

Switching regulators and controllers typically include feedback control circuits to adjust the output voltage and current, as well as protection circuits to prevent overvoltage, overcurrent, and overtemperature conditions. They may also include features such as soft-start to reduce inrush currents and synchronization with external clock signals.