28 Digital Signal Processors (DSPs) 203

Reset All

Part	Manufacturer	Peripheral IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Integrated Cache	Surface Mount	Maximum Supply Voltage	On Chip Data RAM Width	Screening Level	Address Bus Width	DAC Channels	Bit Size	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage	Maximum Operating Temperature	No. of External Interrupts	Minimum Operating Temperature	Terminal Finish	ADC Channels	Terminal Position	DMA Channels	Maximum Seated Height	ROM Words	RAM Words	Width	Data EEPROM Size	Additional Features	Boundary Scan	Peripherals	External Data Bus Width	Maximum Clock Frequency	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Internal Bus Architecture	Length	No. of Timers	RAM Bytes	Technology	Analog To Digital Convertors	Maximum Supply Current	Nominal Supply Voltage	No. of DMA Channels	PWM Channels	No. of Serial I/Os	Sub-Category	Connectivity	ROM Programmability	Terminal Pitch	Format	JESD-30 Code	Moisture Sensitivity Level (MSL)	Qualification	Speed	Low Power Mode	Barrel Shifter	JESD-609 Code	On Chip Program ROM Width	No. of I/O Lines
DSPIC30F2020-30I/SO	Microchip Technology		INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	5.5 V	8	TS 16949	24		16	3.3/5	SMALL OUTLINE	SOP28,.4	3 V	85 Cel	3	-40 Cel	MATTE TIN		DUAL		2.65 mm		512	7.5 mm			NO		16				MULTIPLE	17.9 mm	5		CMOS		273 mA	3.3 V			2	Digital Signal Processors		FLASH	1.27 mm	FIXED POINT	R-PDSO-G28		Not Qualified		YES	YES	e3	24
DSPIC30F2020-30I/MM	Microchip Technology		INDUSTRIAL	NO LEAD	28	QCCN	SQUARE	PLASTIC/EPOXY	NO	YES	5.5 V	8	TS 16949	24		16	3.3/5	CHIP CARRIER	LCC28,.24SQ,25	3 V	85 Cel	3	-40 Cel	MATTE TIN		QUAD		1 mm		512	6 mm			NO		16				MULTIPLE	6 mm	5		CMOS		273 mA	3.3 V			2	Digital Signal Processors		FLASH	.65 mm	FIXED POINT	S-PQCC-N28		Not Qualified		YES	YES	e3	24
DSPIC33FJ06GS202T-I/MM	Microchip Technology		INDUSTRIAL	NO LEAD	28	QCCN	SQUARE	PLASTIC/EPOXY	NO	YES	3.6 V	8	TS 16949			16	3.3	CHIP CARRIER	LCC28,.24SQ,25	3 V	85 Cel	3	-40 Cel	MATTE TIN		QUAD		1 mm		1024	6 mm			YES			40 MHz			MULTIPLE	6 mm	5		CMOS		160 mA	3.3 V			1	Digital Signal Processors		FLASH	.65 mm	FIXED POINT	S-PQCC-N28		Not Qualified		YES	YES	e3	24
DSPIC33FJ06GS102A-E/MM	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	AUTOMOTIVE	NO LEAD	28	HVQCCN	SQUARE	PLASTIC/EPOXY	NO	YES	3.6 V	16		0		16	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.24SQ,25	3 V	125 Cel	3	-40 Cel	MATTE TIN		QUAD		1 mm			6 mm			YES		0					6 mm	2		CMOS		125 mA	3.3 V	0		1	Digital Signal Processors		FLASH	.65 mm		S-PQCC-N28		Not Qualified		NO		e3	24
DSPIC33FJ16GP102-I/SO	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	3.6 V			0		16	3.3	SMALL OUTLINE	SOP28,.4	3 V	85 Cel		-40 Cel	MATTE TIN		DUAL		2.65 mm			7.5 mm					16	32 MHz	40	250		17.9 mm			CMOS		21 mA	3.3 V				Digital Signal Processors		FLASH	1.27 mm	FIXED POINT	R-PDSO-G28	1	Not Qualified				e3	24
DSPIC33FJ16MC102-I/SS	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY		YES	3.6 V			0		16		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	3 V	85 Cel		-40 Cel	MATTE TIN		DUAL		2 mm			5.3 mm					16	32 MHz	40	260		10.2 mm			CMOS			3.3 V						FLASH	.65 mm		R-PDSO-G28	2	Not Qualified				e3	24
DSPIC33EP64GP502-I/SO	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	3.6 V	8	TS 16949	0		16	3.3	SMALL OUTLINE	SOP28,.4	3 V	85 Cel	3	-40 Cel	MATTE TIN		DUAL		2.65 mm		8192	7.5 mm			YES		0	60 MHz	40	250		17.9 mm	5		CMOS		55 mA	3.3 V	4			Digital Signal Processors		FLASH	1.27 mm	FIXED POINT	R-PDSO-G28	1	Not Qualified		YES		e3	8
DSPIC33EP64MC202-I/SP	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	INDUSTRIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	NO	3.6 V	8	TS 16949	0		16	3.3	IN-LINE	DIP28,.3	3 V	85 Cel	3	-40 Cel	MATTE TIN		DUAL		5.08 mm		8192	7.62 mm			YES		0	60 MHz				34.671 mm	5		CMOS		55 mA	3.3 V	4			Digital Signal Processors		FLASH	2.54 mm	FIXED POINT	R-PDIP-T28		Not Qualified		YES		e3	8
DSPIC33EP64MC202-I/SS	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	3.6 V	8	TS 16949	0	NO	16	3.3	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	3 V	85 Cel	3	-40 Cel	MATTE TIN	YES	DUAL	YES	2 mm	21845	8192	5.3 mm	0		YES	BOD, COMPARATOR(3), DMA(4), POR, PWM(4), RTCC, TIMER(5), WDT	0	60 MHz	40	260	MULTIPLE	10.2 mm	5	8192	CMOS	6-Ch 12-Bit	55 mA	3.3 V	4	YES		Digital Signal Processors	I2C(2), IRDA, LIN, SPI(2), UART(2)	FLASH	.65 mm	FIXED POINT	R-PDSO-G28	2	Not Qualified	70 rpm	YES	YES	e3	8	21
DSPIC33EP128GP502-E/SO	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	AUTOMOTIVE	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	3.6 V			0		16	3.3	SMALL OUTLINE	SOP28,.4	3 V	125 Cel		-40 Cel	MATTE TIN		DUAL		2.65 mm			7.5 mm					0	60 MHz	40	260		17.9 mm			CMOS		150 mA	3.3 V				Digital Signal Processors		FLASH	1.27 mm	FLOATING POINT	R-PDSO-G28	1	Not Qualified				e3	24
DSPIC33EP128GP502-I/SO	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	3.6 V	8	TS 16949	0		16	3.3	SMALL OUTLINE	SOP28,.4	3 V	85 Cel	3	-40 Cel	MATTE TIN		DUAL		2.65 mm		16384	7.5 mm			YES		0	60 MHz	40	250		17.9 mm	5		CMOS		55 mA	3.3 V	4			Digital Signal Processors		FLASH	1.27 mm	FIXED POINT	R-PDSO-G28	1	Not Qualified		YES		e3	8
DSPIC33EP128GP502T-I/SO	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	3.6 V			0		16	3.3	SMALL OUTLINE	SOP28,.4	3 V	85 Cel		-40 Cel	MATTE TIN		DUAL		2.65 mm			7.5 mm					0	60 MHz	40	250		17.9 mm			CMOS		150 mA	3.3 V				Digital Signal Processors		FLASH	1.27 mm	FLOATING POINT	R-PDSO-G28	1	Not Qualified				e3	24
DSPIC33EP128MC202-E/SO	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	AUTOMOTIVE	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	3.6 V	8	TS 16949	0		16	3.3	SMALL OUTLINE	SOP28,.4	3 V	125 Cel	3	-40 Cel	MATTE TIN		DUAL		2.65 mm		16384	7.5 mm			YES		0	60 MHz	40	250		17.9 mm	5		CMOS		55 mA	3.3 V	4			Digital Signal Processors		FLASH	1.27 mm	FIXED POINT	R-PDSO-G28	1	Not Qualified		YES		e3	8
DSPIC33EP128MC502-E/SS	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	AUTOMOTIVE	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	3.6 V	8	TS 16949	0		16	3.3	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	3 V	125 Cel	3	-40 Cel	MATTE TIN		DUAL		2 mm		16384	5.3 mm			YES		0	60 MHz	40	260		10.2 mm	5		CMOS		55 mA	3.3 V	4			Digital Signal Processors		FLASH	.65 mm	FIXED POINT	R-PDSO-G28	2	Not Qualified		YES		e3	8
DSPIC33EP128MC502-I/SO	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	3.6 V	8	TS 16949	0		16	3.3	SMALL OUTLINE	SOP28,.4	3 V	85 Cel	3	-40 Cel	MATTE TIN		DUAL		2.65 mm		16384	7.5 mm			YES		0	60 MHz	40	250		17.9 mm	5		CMOS		55 mA	3.3 V	4			Digital Signal Processors		FLASH	1.27 mm	FIXED POINT	R-PDSO-G28	1	Not Qualified		YES		e3	8
DSPIC33EP256GP502-E/MM	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	AUTOMOTIVE	NO LEAD	28	HVQCCN	SQUARE	PLASTIC/EPOXY	NO	YES	3.6 V	8	TS 16949	0		16	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.24SQ,25	3 V	125 Cel	3	-40 Cel	MATTE TIN		QUAD		1 mm		32768	6 mm			YES		0	60 MHz	40	260		6 mm	5		CMOS		55 mA	3.3 V	4			Digital Signal Processors		FLASH	.65 mm	FIXED POINT	S-PQCC-N28	1	Not Qualified		YES		e3	8
DSPIC33EP256GP502-E/SO	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	AUTOMOTIVE	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	3.6 V	8	TS 16949	0		16	3.3	SMALL OUTLINE	SOP28,.4	3 V	125 Cel	3	-40 Cel	Matte Tin (Sn) - annealed		DUAL		2.65 mm		32768	7.5 mm			YES		0	60 MHz	40	250		17.9 mm	5		CMOS		55 mA	3.3 V	4			Digital Signal Processors		FLASH	1.27 mm	FIXED POINT	R-PDSO-G28	1	Not Qualified		YES		e3	8
DSPIC33EP256GP502-E/SS	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	AUTOMOTIVE	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	3.6 V	8	TS 16949	0		16	3.3	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	3 V	125 Cel	3	-40 Cel	Matte Tin (Sn) - annealed		DUAL		2 mm		32768	5.3 mm			YES		0	60 MHz	40	260		10.2 mm	5		CMOS		55 mA	3.3 V	4			Digital Signal Processors		FLASH	.65 mm	FIXED POINT	R-PDSO-G28	2	Not Qualified		YES		e3	8
DSPIC33EP256GP502-I/SO	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	3.6 V	8	TS 16949	0		16	3.3	SMALL OUTLINE	SOP28,.4	3 V	85 Cel	3	-40 Cel	MATTE TIN		DUAL		2.65 mm		32768	7.5 mm			YES		0	60 MHz	40	250		17.9 mm	5		CMOS		55 mA	3.3 V	4			Digital Signal Processors		FLASH	1.27 mm	FIXED POINT	R-PDSO-G28	1	Not Qualified		YES		e3	8
DSPIC33EP256GP502-I/SP	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	INDUSTRIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	NO	3.6 V	8	TS 16949	0		16	3.3	IN-LINE	DIP28,.3	3 V	85 Cel	3	-40 Cel	MATTE TIN		DUAL		5.08 mm		32768	7.62 mm			YES		0	60 MHz				34.671 mm	5		CMOS		55 mA	3.3 V	4			Digital Signal Processors		FLASH	2.54 mm	FIXED POINT	R-PDIP-T28		Not Qualified		YES		e3	8
DSPIC33EP256GP502-I/SS	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	3.6 V	8	TS 16949	0	NO	16	3.3	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	3 V	85 Cel	3	-40 Cel	MATTE TIN	YES	DUAL	YES	2 mm	87381	32768	5.3 mm	0		YES	BOD, COMPARATOR(3), DMA(4), POR, PWM(4), RTCC, TIMER(5), WDT	0	60 MHz	40	260	MULTIPLE	10.2 mm	5	32768	CMOS	6-Ch 12-Bit	55 mA	3.3 V	4	YES		Digital Signal Processors	CAN, I2C(2), IRDA, LIN, SPI(2), UART(2)	FLASH	.65 mm	FIXED POINT	R-PDSO-G28	2	Not Qualified	70 rpm	YES	YES	e3	8	21
DSPIC33EP256GP502T-I/MM	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	INDUSTRIAL	NO LEAD	28	HVQCCN	SQUARE	PLASTIC/EPOXY	NO	YES	3.6 V	8	TS 16949	0		16	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.24SQ,25	3 V	85 Cel	3	-40 Cel	MATTE TIN		QUAD		1 mm		32768	6 mm			YES		0	60 MHz	40	260		6 mm	5		CMOS		55 mA	3.3 V	4			Digital Signal Processors		FLASH	.65 mm	FIXED POINT	S-PQCC-N28	1	Not Qualified		YES		e3	8
DSPIC33EP256GP502T-I/SO	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	3.6 V	8	TS 16949	0		16	3.3	SMALL OUTLINE	SOP28,.4	3 V	85 Cel	3	-40 Cel	Matte Tin (Sn) - annealed		DUAL		2.65 mm		32768	7.5 mm			YES		0	60 MHz	40	250		17.9 mm	5		CMOS		55 mA	3.3 V	4			Digital Signal Processors		FLASH	1.27 mm	FIXED POINT	R-PDSO-G28	1	Not Qualified		YES		e3	8
DSPIC33EP256GP502T-I/SS	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	3.6 V	8	TS 16949	0		16	3.3	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	3 V	85 Cel	3	-40 Cel	MATTE TIN		DUAL		2 mm		32768	5.3 mm			YES		0	60 MHz	40	260		10.2 mm	5		CMOS		55 mA	3.3 V	4			Digital Signal Processors		FLASH	.65 mm	FIXED POINT	R-PDSO-G28	2	Not Qualified		YES		e3	8
DSPIC33EP256MC202-E/MM	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	AUTOMOTIVE	NO LEAD	28	HVQCCN	SQUARE	PLASTIC/EPOXY	NO	YES	3.6 V	8	TS 16949	0		16	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.24SQ,25	3 V	125 Cel	3	-40 Cel	Matte Tin (Sn) - annealed		QUAD		1 mm		32768	6 mm			YES		0	60 MHz	40	260		6 mm	5		CMOS		55 mA	3.3 V	4			Digital Signal Processors		FLASH	.65 mm	FIXED POINT	S-PQCC-N28	1	Not Qualified		YES		e3	8
DSPIC33EP256MC202-E/SO	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	AUTOMOTIVE	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	3.6 V	8	TS 16949	0		16	3.3	SMALL OUTLINE	SOP28,.4	3 V	125 Cel	3	-40 Cel	Matte Tin (Sn) - annealed		DUAL		2.65 mm		32768	7.5 mm			YES		0	60 MHz	40	250		17.9 mm	5		CMOS		55 mA	3.3 V	4			Digital Signal Processors		FLASH	1.27 mm	FIXED POINT	R-PDSO-G28	1	Not Qualified		YES		e3	8
DSPIC33EP256MC202-I/SS	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	3.6 V	8	TS 16949	0	NO	16	3.3	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	3 V	85 Cel	3	-40 Cel	MATTE TIN	YES	DUAL	YES	2 mm	87381	32768	5.3 mm	0		YES	BOD, COMPARATOR(3), DMA(4), POR, PWM(4), RTCC, TIMER(5), WDT	0	60 MHz	40	260	MULTIPLE	10.2 mm	5	32768	CMOS	6-Ch 12-Bit	55 mA	3.3 V	4	YES		Digital Signal Processors	I2C(2), IRDA, LIN, SPI(2), UART(2)	FLASH	.65 mm	FIXED POINT	R-PDSO-G28	2	Not Qualified	70 rpm	YES	YES	e3	8	21
DSPIC33EP256MC502-E/SO	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	AUTOMOTIVE	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	3.6 V	8	TS 16949	0		16	3.3	SMALL OUTLINE	SOP28,.4	3 V	125 Cel	3	-40 Cel	Matte Tin (Sn) - annealed		DUAL		2.65 mm		32768	7.5 mm			YES		0	60 MHz	40	250		17.9 mm	5		CMOS		55 mA	3.3 V	4			Digital Signal Processors		FLASH	1.27 mm	FIXED POINT	R-PDSO-G28	1	Not Qualified		YES		e3	8
DSPIC33EP256MC502-E/SS	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	AUTOMOTIVE	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	3.6 V	8	TS 16949	0		16	3.3	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	3 V	125 Cel	3	-40 Cel	MATTE TIN		DUAL		2 mm		32768	5.3 mm			YES		0	60 MHz	40	260		10.2 mm	5		CMOS		55 mA	3.3 V	4			Digital Signal Processors		FLASH	.65 mm	FIXED POINT	R-PDSO-G28	2	Not Qualified		YES		e3	8
DSPIC33EP256MC502-I/SP	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	INDUSTRIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	NO	3.6 V	8	TS 16949	0		16	3.3	IN-LINE	DIP28,.3	3 V	85 Cel	3	-40 Cel	MATTE TIN		DUAL		5.08 mm		32768	7.62 mm			YES		0	60 MHz				34.671 mm	5		CMOS		55 mA	3.3 V	4			Digital Signal Processors		FLASH	2.54 mm	FIXED POINT	R-PDIP-T28		Not Qualified		YES		e3	8
DSPIC33EP256MC502-I/SS	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	3.6 V	8	TS 16949	0	NO	16	3.3	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	3 V	85 Cel	3	-40 Cel	MATTE TIN	YES	DUAL	YES	2 mm	87381	32768	5.3 mm	0		YES	BOD, COMPARATOR(3), DMA(4), POR, PWM(4), RTCC, TIMER(5), WDT	0	60 MHz	40	260	MULTIPLE	10.2 mm	5	32768	CMOS	6-Ch 12-Bit	55 mA	3.3 V	4	YES		Digital Signal Processors	CAN, I2C(2), IRDA, LIN, SPI(2), UART(2)	FLASH	.65 mm	FIXED POINT	R-PDSO-G28	2	Not Qualified	70 rpm	YES	YES	e3	8	21
DSPIC33EP32GP502-E/SO	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	AUTOMOTIVE	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	3.6 V	8	TS 16949	0		16	3.3	SMALL OUTLINE	SOP28,.4	3 V	125 Cel	3	-40 Cel	MATTE TIN		DUAL		2.65 mm		4096	7.5 mm			YES		0	60 MHz	40	250		17.9 mm	5		CMOS		55 mA	3.3 V	4			Digital Signal Processors		FLASH	1.27 mm	FIXED POINT	R-PDSO-G28	1	Not Qualified		YES		e3	8
DSPIC33EP32GP502-I/SS	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	3.6 V	8	TS 16949	0	NO	16	3.3	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	3 V	85 Cel	3	-40 Cel	MATTE TIN	YES	DUAL	YES	2 mm	10922	4096	5.3 mm	0		YES	BOD, COMPARATOR(3), DMA(4), POR, PWM(4), RTCC, TIMER(5), WDT	0	60 MHz	40	260	MULTIPLE	10.2 mm	5	4096	CMOS	6-Ch 12-Bit	55 mA	3.3 V	4	YES		Digital Signal Processors	CAN, I2C(2), IRDA, LIN, SPI(2), UART(2)	FLASH	.65 mm	FIXED POINT	R-PDSO-G28	2	Not Qualified	70 rpm	YES	YES	e3	8	21
DSPIC33EP32GP502T-E/SO	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	AUTOMOTIVE	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	3.6 V	8	TS 16949	0		16	3.3	SMALL OUTLINE	SOP28,.4	3 V	125 Cel	3	-40 Cel	MATTE TIN		DUAL		2.65 mm		4096	7.5 mm			YES		0	60 MHz	40	250		17.9 mm	5		CMOS		55 mA	3.3 V	4			Digital Signal Processors		FLASH	1.27 mm	FIXED POINT	R-PDSO-G28	1	Not Qualified		YES		e3	8
DSPIC33EP32MC202-E/MM	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	AUTOMOTIVE	NO LEAD	28	HVQCCN	SQUARE	PLASTIC/EPOXY	NO	YES	3.6 V	8	TS 16949	0		16	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.24SQ,25	3 V	125 Cel	3	-40 Cel	MATTE TIN		QUAD		1 mm		4096	6 mm			YES		0	60 MHz	40	260		6 mm	5		CMOS		55 mA	3.3 V	4			Digital Signal Processors		FLASH	.65 mm	FIXED POINT	S-PQCC-N28	1	Not Qualified		YES		e3	8
DSPIC33EP32MC202-E/SO	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	AUTOMOTIVE	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	3.6 V	8	TS 16949	0		16	3.3	SMALL OUTLINE	SOP28,.4	3 V	125 Cel	3	-40 Cel	MATTE TIN		DUAL		2.65 mm		4096	7.5 mm			YES		0	60 MHz	40	250		17.9 mm	5		CMOS		55 mA	3.3 V	4			Digital Signal Processors		FLASH	1.27 mm	FIXED POINT	R-PDSO-G28	1	Not Qualified		YES		e3	8
DSPIC33EP32MC202-I/SO	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	3.6 V	8	TS 16949	0		16	3.3	SMALL OUTLINE	SOP28,.4	3 V	85 Cel	3	-40 Cel	MATTE TIN		DUAL		2.65 mm		4096	7.5 mm			YES		0	60 MHz	40	250		17.9 mm	5		CMOS		55 mA	3.3 V	4			Digital Signal Processors		FLASH	1.27 mm	FIXED POINT	R-PDSO-G28	1	Not Qualified		YES		e3	8
DSPIC33EP32MC202-I/SP	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	INDUSTRIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	NO	3.6 V	8	TS 16949	0		16	3.3	IN-LINE	DIP28,.3	3 V	85 Cel	3	-40 Cel	MATTE TIN		DUAL		5.08 mm		4096	7.62 mm			YES		0	60 MHz				34.671 mm	5		CMOS		55 mA	3.3 V	4			Digital Signal Processors		FLASH	2.54 mm	FIXED POINT	R-PDIP-T28		Not Qualified		YES		e3	8
DSPIC33EP32MC202T-I/MM	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	INDUSTRIAL	NO LEAD	28	HVQCCN	SQUARE	PLASTIC/EPOXY	NO	YES	3.6 V	8	TS 16949	0		16	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.24SQ,25	3 V	85 Cel	3	-40 Cel	MATTE TIN		QUAD		1 mm		4096	6 mm			YES		0	60 MHz	40	260		6 mm	5		CMOS		55 mA	3.3 V	4			Digital Signal Processors		FLASH	.65 mm	FIXED POINT	S-PQCC-N28	1	Not Qualified		YES		e3	8
DSPIC33EP32MC502-E/MM	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	AUTOMOTIVE	NO LEAD	28	HVQCCN	SQUARE	PLASTIC/EPOXY	NO	YES	3.6 V	8	TS 16949	0		16	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.24SQ,25	3 V	125 Cel	3	-40 Cel	MATTE TIN		QUAD		1 mm		4096	6 mm			YES		0	60 MHz	40	260		6 mm	5		CMOS		55 mA	3.3 V	4			Digital Signal Processors		FLASH	.65 mm	FIXED POINT	S-PQCC-N28	1	Not Qualified		YES		e3	8
DSPIC33EP32MC502-E/SO	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	AUTOMOTIVE	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	3.6 V	8	TS 16949	0		16	3.3	SMALL OUTLINE	SOP28,.4	3 V	125 Cel	3	-40 Cel	MATTE TIN		DUAL		2.65 mm		4096	7.5 mm			YES		0	60 MHz	40	260		17.9 mm	5		CMOS		55 mA	3.3 V	4			Digital Signal Processors		FLASH	1.27 mm	FIXED POINT	R-PDSO-G28	1	Not Qualified		YES		e3	8
DSPIC33EP32MC502-E/SS	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	AUTOMOTIVE	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	3.6 V	8	TS 16949	0		16	3.3	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	3 V	125 Cel	3	-40 Cel	MATTE TIN		DUAL		2 mm		4096	5.3 mm			YES		0	60 MHz	40	260		10.2 mm	5		CMOS		55 mA	3.3 V	4			Digital Signal Processors		FLASH	.65 mm	FIXED POINT	R-PDSO-G28	2	Not Qualified		YES		e3	8
DSPIC33EP32MC502-I/SP	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	INDUSTRIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	NO	3.6 V	8	TS 16949	0		16	3.3	IN-LINE	DIP28,.3	3 V	85 Cel	3	-40 Cel	MATTE TIN		DUAL		5.08 mm		4096	7.62 mm			YES		0	60 MHz				34.671 mm	5		CMOS		55 mA	3.3 V	4			Digital Signal Processors		FLASH	2.54 mm	FIXED POINT	R-PDIP-T28		Not Qualified		YES		e3	8
DSPIC33EP64GP502-E/SO	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	AUTOMOTIVE	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	3.6 V	8	TS 16949	0		16	3.3	SMALL OUTLINE	SOP28,.4	3 V	125 Cel	3	-40 Cel	MATTE TIN		DUAL		2.65 mm		8192	7.5 mm			YES		0	60 MHz	40	250		17.9 mm	5		CMOS		55 mA	3.3 V	4			Digital Signal Processors		FLASH	1.27 mm	FIXED POINT	R-PDSO-G28	1	Not Qualified		YES		e3	8
DSPIC33EP64GP502T-I/SO	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	3.6 V	8	TS 16949	0		16	3.3	SMALL OUTLINE	SOP28,.4	3 V	85 Cel	3	-40 Cel	MATTE TIN		DUAL		2.65 mm		8192	7.5 mm			YES		0	60 MHz	40	260		17.9 mm	5		CMOS		55 mA	3.3 V	4			Digital Signal Processors		FLASH	1.27 mm	FIXED POINT	R-PDSO-G28	1	Not Qualified		YES		e3	8
DSPIC33EP64MC202-E/SS	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	AUTOMOTIVE	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	3.6 V	8	TS 16949	0		16	3.3	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	3 V	125 Cel	3	-40 Cel	MATTE TIN		DUAL		2 mm		8192	5.3 mm			YES		0	60 MHz	40	260		10.2 mm	5		CMOS		55 mA	3.3 V	4			Digital Signal Processors		FLASH	.65 mm	FIXED POINT	R-PDSO-G28	2	Not Qualified		YES		e3	8
DSPIC33EP64MC202T-I/MM	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	INDUSTRIAL	NO LEAD	28	HVQCCN	SQUARE	PLASTIC/EPOXY	NO	YES	3.6 V	8	TS 16949	0		16	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.24SQ,25	3 V	85 Cel	3	-40 Cel	MATTE TIN		QUAD		1 mm		8192	6 mm			YES		0	60 MHz	40	260		6 mm	5		CMOS		55 mA	3.3 V	4			Digital Signal Processors		FLASH	.65 mm	FIXED POINT	S-PQCC-N28	1	Not Qualified		YES		e3	8
PIC24EP128MC202-I/SP	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	INDUSTRIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	NO	3.6 V	8		0		16	3.3	IN-LINE	DIP28,.3	3 V	85 Cel	3	-40 Cel	MATTE TIN		DUAL		5.08 mm		16384	7.62 mm		ALSO WORK AS 10-BIT ADC	YES		0	60 MHz				34.671 mm	5		CMOS		60 mA	3.3 V	4			Microcontrollers		FLASH	2.54 mm	FIXED POINT	R-PDIP-T28		Not Qualified		YES		e3	8

Digital Signal Processors (DSPs)

Digital Signal Processors (DSPs) are specialized microprocessors that are designed to perform mathematical operations on digital signals. They are used in a variety of applications that require real-time signal processing, such as audio and video processing, telecommunications, and image processing. DSPs are capable of performing complex mathematical operations, such as filtering, convolution, and correlation, on digital signals at high speeds, making them an essential component of modern signal processing systems.

DSPs are optimized for digital signal processing tasks and are designed to handle large amounts of data at high speeds. They typically have a specialized architecture that includes dedicated hardware for performing mathematical operations on digital signals, as well as specialized memory and I/O interfaces that are optimized for signal processing applications.

DSPs are used in a wide range of applications, including audio and video compression, speech recognition, image and video processing, and radar and sonar systems. They are also used in telecommunications systems, such as cell phones and modems, to process signals in real time. DSPs are also used in scientific and engineering applications, such as biomedical research and industrial automation.