Analog Devices DSP Peripherals 69

Reset All

Part	Manufacturer	Peripheral IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	Output Data Bus Width	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	Maximum Seated Height	Width	Additional Features	Boundary Scan	External Data Bus Width	Maximum Clock Frequency	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Technology	Maximum Supply Current	Nominal Supply Voltage	Sub-Category	Terminal Pitch	JESD-30 Code	Moisture Sensitivity Level (MSL)	Qualification	Low Power Mode	JESD-609 Code
ADSP-3128AJG	Analog Devices	DSP PERIPHERAL, PIPELINE REGISTER	COMMERCIAL	PIN/PEG	144	PGA	SQUARE	CERAMIC, METAL-SEALED COFIRED	NO	5.25 V	16		GRID ARRAY		4.75 V	70 Cel	0 Cel	TIN LEAD	PERPENDICULAR	4.19 mm	40 mm		NO	16	20 MHz			40 mm	CMOS		5 V		2.54 mm	S-CPGA-P144		Not Qualified	NO	e0
ADSP-3128ASG/883B	Analog Devices	DSP PERIPHERAL, PIPELINE REGISTER	MILITARY	PIN/PEG	144	PGA	SQUARE	CERAMIC, METAL-SEALED COFIRED	NO	5.5 V	16		GRID ARRAY		4.5 V	125 Cel	-55 Cel	TIN LEAD	PERPENDICULAR	4.19 mm	40 mm		NO	16	20 MHz			40 mm	CMOS		5 V		2.54 mm	S-CPGA-P144		Not Qualified	NO	e0
AD9835BRU-REEL7	Analog Devices	DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	4.25 V	85 Cel	-40 Cel	TIN LEAD	DUAL	1.1 mm	4.4 mm		NO	1	50 MHz		240	5 mm	CMOS		5 V	DSP Peripherals	.65 mm	R-PDSO-G16	1	Not Qualified	YES	e0
AD9850BRS	Analog Devices	DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V			SMALL OUTLINE, SHRINK PITCH		4.75 V	85 Cel	-40 Cel	TIN LEAD	DUAL	2 mm	5.3 mm		NO	8	125 MHz		240	10.2 mm	CMOS	96 mA	5 V		.65 mm	R-PDSO-G28	1	Not Qualified	YES	e0
AD9959BCPZ	Analog Devices	DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR	INDUSTRIAL	NO LEAD	56	HVQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	10		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V	85 Cel	-40 Cel	MATTE TIN	QUAD	1 mm	8 mm	ALSO REQUIRES 3.3V SUPPLY	NO	32	500 MHz		260	8 mm	CMOS		1.8 V		.5 mm	S-XQCC-N56	3	Not Qualified	YES	e3
AD9834BRU	Analog Devices	DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V		2.5/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	2.3 V	105 Cel	-40 Cel	TIN LEAD	DUAL	1.2 mm	4.4 mm		NO		50 MHz		240	6.5 mm	CMOS		2.5 V	DSP Peripherals	.65 mm	R-PDSO-G20	1	Not Qualified	YES	e0
AD9850BRS-REEL	Analog Devices	DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V			SMALL OUTLINE, SHRINK PITCH		4.75 V	85 Cel	-40 Cel	TIN LEAD	DUAL	2 mm	5.3 mm		NO	8	125 MHz		240	10.2 mm	CMOS	96 mA	5 V		.65 mm	R-PDSO-G28	1	Not Qualified	YES	e0
AD9834BRU-REEL7	Analog Devices	DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V		2.5/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	2.3 V	105 Cel	-40 Cel	TIN LEAD	DUAL	1.2 mm	4.4 mm		NO		50 MHz		240	6.5 mm	CMOS		2.5 V	DSP Peripherals	.65 mm	R-PDSO-G20	1	Not Qualified	YES	e0
AD9834BRU-REEL	Analog Devices	DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V		2.5/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	2.3 V	105 Cel	-40 Cel	TIN LEAD	DUAL	1.2 mm	4.4 mm		NO		50 MHz		240	6.5 mm	CMOS		2.5 V	DSP Peripherals	.65 mm	R-PDSO-G20	1	Not Qualified	YES	e0
AD9850BRSZ	Analog Devices	DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V			SMALL OUTLINE, SHRINK PITCH		4.75 V	85 Cel	-40 Cel	MATTE TIN	DUAL	2 mm	5.3 mm		NO	8	125 MHz		260	10.2 mm	CMOS		5 V		.65 mm	R-PDSO-G28	1	Not Qualified	YES	e3
AD9830ASTZ	Analog Devices	DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	5.25 V			FLATPACK, LOW PROFILE, FINE PITCH		4.75 V	85 Cel	-40 Cel	MATTE TIN	QUAD	1.6 mm	7 mm		NO	16	50 MHz	30	260	7 mm	CMOS		5 V		.5 mm	S-PQFP-G48	3	Not Qualified	YES	e3
AD9831ASTZ-REEL	Analog Devices	DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.63 V			FLATPACK, LOW PROFILE, FINE PITCH		2.97 V	85 Cel	-40 Cel	MATTE TIN	QUAD	1.6 mm	7 mm		NO	16	25 MHz	30	260	7 mm	CMOS		3.3 V		.5 mm	S-PQFP-G48	3	Not Qualified	YES	e3
AD9834BRUZ-REEL	Analog Devices	DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V		2.5/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	2.3 V	105 Cel	-40 Cel	MATTE TIN	DUAL	1.2 mm	4.4 mm		NO		50 MHz		260	6.5 mm	CMOS		2.5 V	DSP Peripherals	.65 mm	R-PDSO-G20	1	Not Qualified	YES	e3
AD9835BRUZ	Analog Devices	DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	4.25 V	85 Cel	-40 Cel	MATTE TIN	DUAL	1.1 mm	4.4 mm		NO	1	50 MHz	30	260	5 mm	CMOS		5 V	DSP Peripherals	.65 mm	R-PDSO-G16	1	Not Qualified	YES	e3
AD9835BRUZ-REEL	Analog Devices	DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	4.25 V	85 Cel	-40 Cel	MATTE TIN	DUAL	1.1 mm	4.4 mm		NO	1	50 MHz	30	260	5 mm	CMOS		5 V	DSP Peripherals	.65 mm	R-PDSO-G16	1	Not Qualified	YES	e3
AD9858BSVZ	Analog Devices	DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR	INDUSTRIAL	GULL WING	100	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.465 V			FLATPACK, THIN PROFILE, FINE PITCH		3.135 V	85 Cel	-40 Cel	MATTE TIN	QUAD	1.2 mm	14 mm		NO		2000 MHz		260	14 mm	CMOS		3.3 V		.5 mm	S-PQFP-G100	3	Not Qualified	YES	e3
AD9951YSVZ	Analog Devices	DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR	INDUSTRIAL	GULL WING	48	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	1.89 V			FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH		1.71 V	105 Cel	-40 Cel	MATTE TIN	QUAD	1.2 mm	7 mm		NO		400 MHz	30	260	7 mm	CMOS		1.8 V		.5 mm	S-PQFP-G48	3	Not Qualified	YES	e3
AD9859YSVZ	Analog Devices	DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	1.89 V			FLATPACK, THIN PROFILE, FINE PITCH		1.71 V	105 Cel	-40 Cel	MATTE TIN	QUAD	1.2 mm	7 mm		NO		400 MHz		260	7 mm	CMOS		1.8 V		.5 mm	S-PQFP-G48	3	Not Qualified	YES	e3
AD9953YSVZ	Analog Devices	DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	1.89 V			FLATPACK, THIN PROFILE, FINE PITCH		1.71 V	105 Cel	-40 Cel	MATTE TIN	QUAD	1.2 mm	7 mm		NO		400 MHz		260	7 mm	CMOS		1.8 V		.5 mm	S-PQFP-G48	3	Not Qualified	YES	e3
AD9953YSVZ-REEL7	Analog Devices	DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	1.89 V			FLATPACK, THIN PROFILE, FINE PITCH		1.71 V	105 Cel	-40 Cel	MATTE TIN	QUAD	1.2 mm	7 mm		NO		400 MHz	40	260	7 mm	CMOS		1.8 V		.5 mm	S-PQFP-G48	3	Not Qualified	YES	e3
AD9954YSVZ	Analog Devices	DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR	INDUSTRIAL	GULL WING	48	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	1.89 V			FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH		1.71 V	105 Cel	-40 Cel	MATTE TIN	QUAD	1.2 mm	7 mm		NO		400 MHz	30	260	7 mm	CMOS		1.8 V		.5 mm	S-PQFP-G48	3	Not Qualified	YES	e3

DSP Peripherals

DSP (Digital Signal Processing) peripherals are electronic circuits that are designed to be used with DSP processors to perform specific tasks related to signal processing. DSP processors are used in a variety of applications, including audio and video processing, telecommunications, and image processing. DSP peripherals are designed to enhance the functionality of DSP processors by providing additional capabilities such as data acquisition, signal conditioning, and data conversion.

DSP peripherals can include analog-to-digital converters (ADCs), digital-to-analog converters (DACs), amplifiers, filters, and other signal conditioning circuits. These peripherals are used to acquire and condition signals before they are processed by the DSP processor. ADCs are used to convert analog signals, such as audio or video signals, into digital signals that can be processed by the DSP processor. DACs are used to convert digital signals back into analog signals, such as audio or video signals, for output.

DSP peripherals can also include hardware accelerators, which are used to offload computationally intensive tasks from the DSP processor. These hardware accelerators can include digital signal processors, graphics processing units, and other specialized hardware. By offloading these tasks, the DSP processor can focus on other tasks, resulting in improved performance and efficiency.