NXP Semiconductors Microcontrollers 1,833

Reset All

Part	Manufacturer	Peripheral IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	Address Bus Width	DAC Channels	Bit Size	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage	Maximum Operating Temperature	CPU Family	Minimum Operating Temperature	Terminal Finish	ADC Channels	Terminal Position	DMA Channels	Maximum Seated Height	ROM Words	Width	Additional Features	External Data Bus Width	Maximum Clock Frequency	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	RAM Bytes	Technology	Maximum Supply Current	Nominal Supply Voltage	PWM Channels	Sub-Category	ROM Programmability	Terminal Pitch	JESD-30 Code	Moisture Sensitivity Level (MSL)	Qualification	Speed	JESD-609 Code	No. of I/O Lines
LPC3250FET296,551	NXP Semiconductors	MICROCONTROLLER, RISC	INDUSTRIAL	BALL	296	TFBGA	SQUARE	PLASTIC/EPOXY	YES	1.39 V	0	NO	32	1.3,3.3	GRID ARRAY, THIN PROFILE, FINE PITCH	BGA296,18X18,32	1.31 V	85 Cel		-40 Cel	TIN SILVER COPPER	YES	BOTTOM	YES	1.2 mm	16384	15 mm		0	20 MHz			15 mm	262144	CMOS		1.35 V	YES	Microcontrollers	FLASH	.8 mm	S-PBGA-B296	3	Not Qualified	266 rpm	e1	87
P87C51MB2BA/02,529	NXP Semiconductors	MICROCONTROLLER	COMMERCIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.5 V	23	NO	8		CHIP CARRIER		4.5 V	70 Cel		0 Cel	TIN	NO	QUAD	NO	4.57 mm		16.5862 mm	ALSO OPERATES AT 2.7V MINIMUM SUPPLY	8	24 MHz			16.5862 mm		CMOS		5 V	YES		OTPROM	1.27 mm	S-PQCC-J44	3	Not Qualified	24 rpm	e3	34
P87C51MC2BA/02,529	NXP Semiconductors	MICROCONTROLLER	COMMERCIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.5 V	23	NO	8		CHIP CARRIER		4.5 V	70 Cel		0 Cel	TIN	NO	QUAD	NO	4.57 mm		16.5862 mm	ALSO OPERATES AT 2.7V MINIMUM SUPPLY	8	24 MHz		245	16.5862 mm		CMOS		5 V	YES		OTPROM	1.27 mm	S-PQCC-J44	3	Not Qualified	24 rpm	e3	34
P87C591VFA/00,512	NXP Semiconductors	MICROCONTROLLER	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.5 V	16	NO	8		CHIP CARRIER		4.5 V	85 Cel		-40 Cel	TIN	YES	QUAD	NO	4.57 mm		16.5862 mm		8	12 MHz			16.5862 mm		CMOS		5 V	NO		OTPROM	1.27 mm	S-PQCC-J44	3	Not Qualified	12 rpm	e3	32
P87C654X2FA,529	NXP Semiconductors	MICROCONTROLLER	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.5 V	16	NO	8		CHIP CARRIER		4.5 V	85 Cel		-40 Cel	TIN	NO	QUAD	NO	4.57 mm		16.585 mm	ALSO OPERATES AT 2.7V MINIMUM SUPPLY @ 16MHZ	8	33 MHz			16.585 mm		CMOS		5 V	NO		OTPROM	1.27 mm	S-PQCC-J44	3	Not Qualified	33 rpm	e3	32
P87C660X2FA,529	NXP Semiconductors	MICROCONTROLLER	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.5 V	16	NO	8		CHIP CARRIER		4.5 V	85 Cel		-40 Cel	TIN	NO	QUAD	NO	4.57 mm		16.5862 mm	OPERATES AT 2.7 V MINIMUM SUPPLY @ 16 MHZ	8	33 MHz			16.5862 mm		CMOS		5 V	YES		OTPROM	1.27 mm	S-PQCC-J44	3	Not Qualified	33 rpm	e3	32
P89C51RC2FA/01,529	NXP Semiconductors	MICROCONTROLLER	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.5 V	16	NO	8		CHIP CARRIER		4.5 V	85 Cel		-40 Cel		NO	QUAD	NO	4.57 mm		16.5862 mm		8	33 MHz			16.5862 mm		CMOS		5 V	YES		FLASH	1.27 mm	S-PQCC-J44		Not Qualified	33 rpm		32
P89C54X2FA/00,529	NXP Semiconductors	MICROCONTROLLER	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.5 V	16	NO	8		CHIP CARRIER		4.5 V	85 Cel		-40 Cel		NO	QUAD	NO	4.57 mm		16.5862 mm		8	33 MHz			16.5862 mm		CMOS		5 V	NO		FLASH	1.27 mm	S-PQCC-J44		Not Qualified	33 rpm		32
P89LPC901FN,129	NXP Semiconductors	MICROCONTROLLER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	3.6 V	0	NO	8		IN-LINE		3 V	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	NO	DUAL	NO	4.2 mm		7.62 mm		0	18 MHz			9.5 mm		CMOS		3.3 V	YES		FLASH	2.54 mm	R-PDIP-T8		Not Qualified	18 rpm	e4	6
P89LPC902FN,129	NXP Semiconductors	MICROCONTROLLER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	3.6 V	0	NO	8		IN-LINE		3 V	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	NO	DUAL	NO	4.2 mm		7.62 mm		0	7.3728 MHz			9.5 mm		CMOS		3.3 V	NO		FLASH	2.54 mm	R-PDIP-T8		Not Qualified	7.3728 rpm	e4	6
P89LPC9103FTK,115	NXP Semiconductors	MICROCONTROLLER	INDUSTRIAL	NO LEAD	10	VSON	SQUARE	PLASTIC/EPOXY	YES	3.6 V	0	YES	8		SMALL OUTLINE, VERY THIN PROFILE		3 V	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	YES	DUAL	NO	1 mm		3 mm	OPERATES AT 2.4V MINIMUM SUPPLY AT 12 MHZ	0	18 MHz			3 mm		CMOS		3.3 V	YES		FLASH	.5 mm	S-PDSO-N10	1	Not Qualified	18 rpm	e4	8
P89LPC9107FDH,129	NXP Semiconductors	MICROCONTROLLER	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	0	YES	8		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	YES	DUAL	NO	1.1 mm		4.4 mm	OPERATES AT 2.4V MINIMUM SUPPLY AT 12 MHZ	0	18 MHz			5 mm		CMOS		3.3 V	YES		FLASH	.65 mm	R-PDSO-G14	1	Not Qualified	18 rpm	e4	10
P89LPC912FDH,129	NXP Semiconductors	MICROCONTROLLER	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	0	NO	8		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	NO	DUAL	NO	1.1 mm		4.4 mm	OPERATES AT 2.4V MINIMUM SUPPLY AT 12 MHZ	0	18 MHz			5 mm		CMOS		3.3 V	YES		FLASH	.65 mm	R-PDSO-G14	1	Not Qualified	18 rpm	e4	12
P89LPC913FDH,129	NXP Semiconductors	MICROCONTROLLER	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	0	NO	8		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	NO	DUAL	NO	1.1 mm		4.4 mm	OPERATES AT 2.4V MINIMUM SUPPLY AT 12 MHZ	0	18 MHz			5 mm		CMOS		3.3 V	NO		FLASH	.65 mm	R-PDSO-G14	1	Not Qualified	18 rpm	e4	12
P89LPC915FDH,129	NXP Semiconductors	MICROCONTROLLER	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	0	YES	8	2.5/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	3 V	85 Cel	8051	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	YES	DUAL	NO	1.1 mm	2048	4.4 mm	OPERATES AT 2.4V MINIMUM SUPPLY	0	18 MHz	30	260	5 mm	256	CMOS	16 mA	3.3 V	YES	Microcontrollers	FLASH	.65 mm	R-PDSO-G14	1	Not Qualified	18 rpm	e4	12
P89LPC916FDH,118	NXP Semiconductors	MICROCONTROLLER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	0	YES	8	2.5/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	85 Cel	8051	-40 Cel	NICKEL PALLADIUM GOLD	YES	DUAL	NO	1.1 mm	2048	4.4 mm	OPERATES AT 2.4V MINIMUM SUPPLY	0	18 MHz	30	260	5 mm	256	CMOS	16 mA	3.3 V	YES	Microcontrollers	FLASH	.65 mm	R-PDSO-G16	1	Not Qualified	18 rpm	e4	14
P89LPC916FDH,129	NXP Semiconductors	MICROCONTROLLER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	0	YES	8	2.5/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	85 Cel	8051	-40 Cel	NICKEL PALLADIUM GOLD	YES	DUAL	NO	1.1 mm	2048	4.4 mm	OPERATES AT 2.4V MINIMUM SUPPLY	0	18 MHz	30	260	5 mm	256	CMOS	8 mA	3.3 V	YES	Microcontrollers	FLASH	.65 mm	R-PDSO-G16	1	Not Qualified	18 rpm	e4	14
P89LPC917FDH,129	NXP Semiconductors	MICROCONTROLLER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	0	YES	8	2.5/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	85 Cel	8051	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	YES	DUAL	NO	1.1 mm	2048	4.4 mm	OPERATES AT 2.4V MINIMUM SUPPLY	0	18 MHz	30	260	5 mm	256	CMOS	16 mA	3.3 V	YES	Microcontrollers	FLASH	.65 mm	R-PDSO-G16	1	Not Qualified	18 rpm	e4	14
P89LPC920FDH,529	NXP Semiconductors	MICROCONTROLLER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	0	NO	8		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	NO	DUAL	NO	1.1 mm		4.4 mm	OPERATES AT 2.4V MINIMUM SUPPLY @ 12 MHZ	0	18 MHz			6.5 mm		CMOS		3.3 V	YES		FLASH	.65 mm	R-PDSO-G20		Not Qualified	18 rpm	e4	18
P89LPC922FDH,529	NXP Semiconductors	MICROCONTROLLER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	0	NO	8		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	NO	DUAL	NO	1.1 mm		4.4 mm	OPERATES AT 2.4V MINIMUM SUPPLY @ 12 MHZ	0	18 MHz			6.5 mm		CMOS		3.3 V	YES		FLASH	.65 mm	R-PDSO-G20		Not Qualified	18 rpm	e4	18
P89LPC924FDH,518	NXP Semiconductors	MICROCONTROLLER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	0	YES	8		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	YES	DUAL	NO	1.1 mm		4.4 mm	OPERATES AT 2.4V MINIMUM SUPPLY @ 12 MHZ	0	18 MHz			6.5 mm		CMOS		3.3 V	YES		FLASH	.65 mm	R-PDSO-G20	2	Not Qualified	18 rpm	e4	18
P89LPC924FDH,529	NXP Semiconductors	MICROCONTROLLER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	0	YES	8		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	YES	DUAL	NO	1.1 mm		4.4 mm	OPERATES AT 2.4V MINIMUM SUPPLY @ 12 MHZ	0	18 MHz			6.5 mm		CMOS		3.3 V	YES		FLASH	.65 mm	R-PDSO-G20	2	Not Qualified	18 rpm	e4	18
P89LPC925FDH,529	NXP Semiconductors	MICROCONTROLLER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	0	YES	8	2.5/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	3 V	85 Cel	8051	-40 Cel	NICKEL PALLADIUM GOLD	YES	DUAL	NO	1.1 mm	8192	4.4 mm	OPERATES AT 2.4V MINIMUM SUPPLY @ 12 MHZ	0	18 MHz	30	260	6.5 mm	256	CMOS	18 mA	3.3 V	YES	Microcontrollers	FLASH	.65 mm	R-PDSO-G20	1	Not Qualified	18 rpm	e4	18
P89LPC930FDH,129	NXP Semiconductors	MICROCONTROLLER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	0	NO	8		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V	85 Cel		-45 Cel	NICKEL PALLADIUM GOLD	NO	DUAL	NO	1.1 mm		4.4 mm	OPERATES AT 2.4V MINIMUM SUPPLY @ 12 MHZ	0	18 MHz			9.7 mm		CMOS		3.3 V	YES		FLASH	.65 mm	R-PDSO-G28	1	Not Qualified	18 rpm	e4	26
P89LPC9321FA,112	NXP Semiconductors	MICROCONTROLLER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	3.6 V	0	NO	8	2.5/3.3	CHIP CARRIER	LDCC28,.5SQ	2.4 V	85 Cel	8051	-40 Cel	TIN	NO	QUAD	NO	4.57 mm	8192	11.505 mm		0	18 MHz			11.505 mm	768	CMOS	23 mA	3 V	YES	Microcontrollers	FLASH	1.27 mm	S-PQCC-J28	3	Not Qualified	18 rpm	e3	26
P89LPC9321FDH,518	NXP Semiconductors	MICROCONTROLLER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	0	NO	8	2.5/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	2.4 V	85 Cel	8051	-40 Cel	NICKEL PALLADIUM GOLD	NO	DUAL	NO	1.1 mm	8192	4.4 mm		0	18 MHz	30	260	9.7 mm	768	CMOS	23 mA	3 V	YES	Microcontrollers	FLASH	.65 mm	R-PDSO-G28	2	Not Qualified	18 rpm	e4	26
P89LPC9321FN,112	NXP Semiconductors	MICROCONTROLLER	INDUSTRIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	3.6 V	0	NO	8	2.5/3.3	IN-LINE	DIP28,.6	2.4 V	85 Cel	8051	-40 Cel	MATTE TIN	NO	DUAL	NO	5.1 mm	8192	15.24 mm		0	18 MHz			35.5 mm	768	CMOS	23 mA	3 V	YES	Microcontrollers	FLASH	2.54 mm	R-PDIP-T28		Not Qualified	18 rpm	e3	26
P89LPC932A1FA,129	NXP Semiconductors	MICROCONTROLLER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	3.6 V	0	NO	8	2.5/3.3	CHIP CARRIER	LDCC28,.5SQ	2.4 V	85 Cel	8051	-40 Cel	TIN	NO	QUAD	NO	4.57 mm	8192	11.505 mm		0	12 MHz			11.505 mm	768	CMOS	18 mA	3 V	YES	Microcontrollers	FLASH	1.27 mm	S-PQCC-J28	1	Not Qualified	12 rpm	e3	26
P89LPC932A1FDH,529	NXP Semiconductors	MICROCONTROLLER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	0	NO	8		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		2.4 V	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	NO	DUAL	NO	1.1 mm		4.4 mm		0	12 MHz			9.7 mm		CMOS		3 V	YES		FLASH	.65 mm	R-PDSO-G28	3	Not Qualified	12 rpm	e4	26
P89LPC932A1FHN,151	NXP Semiconductors	MICROCONTROLLER	INDUSTRIAL	NO LEAD	28	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	0	NO	8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		2.4 V	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	NO	QUAD	NO	1 mm		6 mm		0	12 MHz			6 mm		CMOS		3 V	YES		FLASH	.65 mm	S-PQCC-N28	1	Not Qualified	12 rpm	e4	26
P89LPC933FDH,529	NXP Semiconductors	MICROCONTROLLER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	0	YES	8	2.5/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	2.4 V	85 Cel	8051	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	YES	DUAL	NO	1.1 mm	4096	4.4 mm		0	12 MHz	30	260	9.7 mm	768	CMOS	23 mA	3 V	YES	Microcontrollers	FLASH	.65 mm	R-PDSO-G28	2	Not Qualified	12 rpm	e4	26
P89LPC934FDH,529	NXP Semiconductors	MICROCONTROLLER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	0	YES	8	2.5/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	2.4 V	85 Cel	8051	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	YES	DUAL	NO	1.1 mm	8192	4.4 mm		0	12 MHz	30	260	9.7 mm	768	CMOS	23 mA	3 V	YES	Microcontrollers	FLASH	.65 mm	R-PDSO-G28	2	Not Qualified	12 rpm	e4	26
P89LPC9351FDH,518	NXP Semiconductors	MICROCONTROLLER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	0	YES	8	2.5/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	2.4 V	85 Cel	8051	-40 Cel	NICKEL PALLADIUM GOLD	YES	DUAL	NO	1.1 mm	8192	4.4 mm		0	18 MHz	30	260	9.7 mm	768	CMOS	23 mA	3 V	YES	Microcontrollers	FLASH	.65 mm	R-PDSO-G28	2	Not Qualified	18 rpm	e4	26
P89LPC935FA,129	NXP Semiconductors	MICROCONTROLLER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	3.6 V	0	YES	8	2.5/3.3	CHIP CARRIER	LDCC28,.5SQ	2.4 V	85 Cel	8051	-40 Cel	Matte Tin (Sn)	YES	QUAD	NO	4.57 mm	8192	11.505 mm		0	12 MHz	30	245	11.505 mm	768	CMOS	23 mA	3 V	YES	Microcontrollers	FLASH	1.27 mm	S-PQCC-J28	1	Not Qualified	12 rpm	e3	26
P89LPC935FDH,529	NXP Semiconductors	MICROCONTROLLER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	0	YES	8	2.5/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	2.4 V	85 Cel	8051	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	YES	DUAL	NO	1.1 mm	8192	4.4 mm		0	12 MHz	30	260	9.7 mm	768	CMOS	23 mA	3 V	YES	Microcontrollers	FLASH	.65 mm	R-PDSO-G28	2	Not Qualified	12 rpm	e4	26
P89LPC936FDH,518	NXP Semiconductors	MICROCONTROLLER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	0	YES	8	2.5/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	2.4 V	85 Cel	8051	-40 Cel	NICKEL PALLADIUM GOLD	YES	DUAL	NO	1.1 mm	16384	4.4 mm		0	12 MHz	30	260	9.7 mm	768	CMOS	23 mA	3 V	YES	Microcontrollers	FLASH	.65 mm	R-PDSO-G28	2	Not Qualified	12 rpm	e4	26
P89LPC936FDH,529	NXP Semiconductors	MICROCONTROLLER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	0	YES	8	2.5/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	2.4 V	85 Cel	8051	-40 Cel	NICKEL PALLADIUM GOLD	YES	DUAL	NO	1.1 mm	16384	4.4 mm		0	12 MHz	30	260	9.7 mm	768	CMOS	18 mA	3 V	YES	Microcontrollers	FLASH	.65 mm	R-PDSO-G28	2	Not Qualified	12 rpm	e4	26
P89LPC938FA,129	NXP Semiconductors	MICROCONTROLLER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	3.6 V	0	NO	8		CHIP CARRIER		3 V	85 Cel		-40 Cel	TIN	YES	QUAD	NO	4.57 mm		11.505 mm	OPERATES AT 2.4V MINIMUM SUPPLY AT 12 MHZ	0	18 MHz			11.505 mm		CMOS		3.3 V	YES		FLASH	1.27 mm	S-PQCC-J28	1	Not Qualified	18 rpm	e3	26
P89LPC938FDH,529	NXP Semiconductors	MICROCONTROLLER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	0	NO	8		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	YES	DUAL	NO	1.1 mm		4.4 mm	OPERATES AT 2.4V MINIMUM SUPPLY AT 12 MHZ	0	18 MHz	40	260	9.7 mm		CMOS		3.3 V	YES		FLASH	.65 mm	R-PDSO-G28	1	Not Qualified	18 rpm	e4	26
P89LPC938FHN,151	NXP Semiconductors	MICROCONTROLLER	INDUSTRIAL	NO LEAD	28	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	0	NO	8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	YES	QUAD	NO	1 mm		6 mm	OPERATES AT 2.4V MINIMUM SUPPLY AT 12 MHZ	0	18 MHz			6 mm		CMOS		3.3 V	YES		FLASH	.65 mm	S-PQCC-N28	1	Not Qualified	18 rpm	e4	26
P89LPC9401FBD,551	NXP Semiconductors	MICROCONTROLLER	INDUSTRIAL	GULL WING	64	LQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	0	NO	8		FLATPACK, LOW PROFILE		3 V	85 Cel		-40 Cel	TIN	NO	QUAD	NO	1.6 mm		14 mm	OPERATES AT 2.4V MINIMUM SUPPLY @ 12 MHZ	0	18 MHz			14 mm		CMOS		3.3 V	YES		FLASH	.8 mm	S-PQFP-G64	2	Not Qualified	18 rpm	e3	23
P89LPC954FA,529	NXP Semiconductors	MICROCONTROLLER	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	3.6 V	0	YES	8	2.5/3.3	CHIP CARRIER	LDCC44,.7SQ	3 V	85 Cel	8051	-40 Cel	TIN	YES	QUAD	NO	4.57 mm	16384	16.585 mm	ALSO OPERATES AT 2.4V SUPPLY	0	18 MHz	30	245	16.585 mm	512	CMOS	23 mA	3.3 V	YES	Microcontrollers	FLASH	1.27 mm	S-PQCC-J44	3	Not Qualified	18 rpm	e3	40
P89LPC954FBD44,151	NXP Semiconductors	MICROCONTROLLER	INDUSTRIAL	GULL WING	44	LQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	0	YES	8	2.5/3.3	FLATPACK, LOW PROFILE	QFP44,.47SQ,32	3 V	85 Cel	8051	-40 Cel	TIN	YES	QUAD	NO	1.6 mm	16384	10 mm	ALSO OPERATES AT 2.4V SUPPLY	0	18 MHz	30	260	10 mm	512	CMOS	23 mA	3.3 V	YES	Microcontrollers	FLASH	.8 mm	S-PQFP-G44	1	Not Qualified	18 rpm	e3	40
P89V51RB2FA,529	NXP Semiconductors	MICROCONTROLLER	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.5 V	16	NO	8	5	CHIP CARRIER	LDCC44,.7SQ	4.5 V	85 Cel	8051	-40 Cel		NO	QUAD	NO	4.57 mm	16384	16.5862 mm		8	40 MHz			16.5862 mm	1024	CMOS	50 mA	5 V	YES	Microcontrollers	FLASH	1.27 mm	S-PQCC-J44		Not Qualified	40 rpm		32
PXAG30KBA,529	NXP Semiconductors	MICROCONTROLLER	COMMERCIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.5 V	20	NO	16		CHIP CARRIER		2.7 V	70 Cel		0 Cel	TIN	NO	QUAD	NO	4.57 mm		16.5862 mm		16	30 MHz			16.5862 mm		CMOS		3 V	YES			1.27 mm	S-PQCC-J44	3	Not Qualified	30 rpm	e3	32
PXAG30KFA,529	NXP Semiconductors	MICROCONTROLLER	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.5 V	20	NO	16		CHIP CARRIER		2.85 V	85 Cel		-40 Cel	TIN	NO	QUAD	NO	4.57 mm		16.5862 mm	CAN ALSO OPERATE AT 2.7V MIN SUPPLY	16	30 MHz			16.5862 mm		CMOS		3 V	YES			1.27 mm	S-PQCC-J44	3	Not Qualified	30 rpm	e3	32
TDA8029HL/C206,118	NXP Semiconductors	MICROCONTROLLER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	6 V	0	NO	8	1.8/5,3/5	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	2.7 V	90 Cel		-40 Cel	Tin (Sn)	NO	QUAD	NO	1.6 mm		7 mm		0	27 MHz			7 mm		CMOS		3.3 V	NO	Other Microprocessor ICs	MROM	.8 mm	S-PQFP-G32		Not Qualified	20 rpm	e3	8
TDA8029HL/C207,118	NXP Semiconductors	MICROCONTROLLER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	6 V	0	NO	8	1.8/5,3/5	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	2.7 V	90 Cel		-40 Cel	TIN	NO	QUAD	NO	1.6 mm		7 mm		0	27 MHz	30	260	7 mm		CMOS		3.3 V	NO	Other Microprocessor ICs	MROM	.8 mm	S-PQFP-G32	1	Not Qualified	20 rpm	e3	8

Microcontrollers

A microcontroller is a type of integrated circuit (IC) that is designed to control a specific task or set of tasks within a larger system. Unlike a microprocessor, which is designed to be a general-purpose computing device, a microcontroller is optimized for embedded applications that require real-time control and processing.

Microcontrollers typically contain a processor core, memory, input/output (I/O) ports, and various peripheral devices, all on a single chip. The processor core is usually a low-power, low-speed version of a microprocessor, such as an 8-bit or 16-bit processor. The memory on a microcontroller includes both volatile and non-volatile memory, such as random-access memory (RAM) and flash memory, respectively. The I/O ports are used to interface with external devices such as sensors, switches, and displays.

Microcontrollers are used in a wide range of applications, including automotive systems, medical devices, consumer electronics, and industrial automation. They are particularly well-suited for applications that require real-time control and processing, such as motor control, temperature sensing, and data acquisition.

One of the key advantages of microcontrollers is their low cost and small size. Because all of the necessary components are integrated onto a single chip, microcontrollers are much smaller and less expensive than other types of computing devices. This makes them ideal for use in small, battery-powered devices such as handheld calculators and remote controls.