SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL Serial Communication Controllers 7

Reset All

Part	Manufacturer	Peripheral IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	On Chip Data RAM Width	Address Bus Width	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage	Maximum Operating Temperature	Maximum Data Transfer Rate	Minimum Operating Temperature	Terminal Finish	Terminal Position	Maximum Seated Height	RAM Words	Width	Additional Features	Boundary Scan	External Data Bus Width	Data Encoding or Decoding Method	Communication Protocol	Maximum Clock Frequency	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Technology	Maximum Supply Current	Nominal Supply Voltage	No. of DMA Channels	No. of Serial I/Os	Sub-Category	Bus Compatibility	Terminal Pitch	JESD-30 Code	Moisture Sensitivity Level (MSL)	Qualification	Low Power Mode	JESD-609 Code	No. of I/O Lines
TMS38021NL	Texas Instruments	SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL	COMMERCIAL	THROUGH-HOLE	48	DIP	RECTANGULAR	PLASTIC/EPOXY	NO				5	IN-LINE	DIP48,.6		70 Cel		0 Cel		DUAL													MOS	175 mA	5 V			Serial IO/Communication Controllers		2.54 mm	R-PDIP-T48		Not Qualified
UPD6708GS-E2-A	Renesas Electronics	SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES				5	SMALL OUTLINE	SOP16,.3		85 Cel		-40 Cel		DUAL													CMOS	10 mA	5 V			Serial IO/Communication Controllers		1.27 mm	R-PDSO-G16		Not Qualified
SC26C562C1A,512	NXP Semiconductors	SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL	COMMERCIAL	J BEND	52	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.5 V	0	6	5	CHIP CARRIER	LDCC52,.8SQ	4.5 V	70 Cel	1.25 MBps	0 Cel		QUAD	4.57 mm	0	19.125 mm		NO	8	NRZ; NRZI; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER)	ASYNC, BIT; SYNC, BYTE; SYNC, HDLC; SYNC, SDLC; X.25; X.75; BISYNC; EXT SYNC; ADCCP; DDCMP	16 MHz	40	245	19.125 mm	CMOS	80 mA	5 V	0	2	Other Microprocessor ICs	8086; IAPX 86	1.27 mm	S-PQCC-J52		Not Qualified	NO		8
Z85C3008PSG	IXYS Corporation	SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL	COMMERCIAL	THROUGH-HOLE	40	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	0	1	5	IN-LINE	DIP40,.6	4.5 V	70 Cel	.5125 MBps	0 Cel	MATTE TIN	DUAL	4.24 mm	0	15.24 mm	TWO MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFO	NO	8	NRZ; NRZI-SPACE; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER)	ASYNC, BIT; SYNC, BYTE; SYNC, HDLC; SYNC, SDLC; X.25; BISYNC; EXT SYNC	8 MHz			52.325 mm	CMOS	12 mA	5 V	0	2	Other Microprocessor ICs	Z80	2.54 mm	R-PDIP-T40		Not Qualified	NO	e3	0
Z85C3010PSG	IXYS Corporation	SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL	COMMERCIAL	THROUGH-HOLE	40	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	0	1	5	IN-LINE	DIP40,.6	4.5 V	70 Cel	.5125 MBps	0 Cel	MATTE TIN	DUAL	4.24 mm	0	15.24 mm	TWO MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFO	NO	8	NRZ; NRZI-SPACE; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER)	ASYNC, BIT; SYNC, BYTE; SYNC, HDLC; SYNC, SDLC; X.25; BISYNC; EXT SYNC	10 MHz			52.325 mm	CMOS	12 mA	5 V	0	2	Other Microprocessor ICs	Z80	2.54 mm	R-PDIP-T40		Not Qualified	NO	e3	0
Z85C3016VSG	IXYS Corporation	SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL	COMMERCIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.5 V	0	1	5	CHIP CARRIER	LDCC44,.7SQ	4.5 V	70 Cel	.5125 MBps	0 Cel	MATTE TIN	QUAD	4.57 mm	0	16.5862 mm	TWO MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFO	NO	8	NRZ; NRZI-SPACE; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER)	ASYNC, BIT; SYNC, BYTE; SYNC, HDLC; SYNC, SDLC; X.25; BISYNC; EXT SYNC	16 MHz			16.5862 mm	CMOS	15 mA	5 V	0	2	Other Microprocessor ICs	Z80	1.27 mm	S-PQCC-J44	3	Not Qualified	NO	e3	0
W6100	Wiznet	SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL		GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.63 V	8			FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20	2.97 V	85 Cel	12.5 MBps	-40 Cel		QUAD	1.6 mm		7 mm		NO	8		SYNC, BYTE; ETHERNET	70 MHz			7 mm	CMOS		3.3 V				SPI	.5 mm	S-PQFP-G48			YES

Serial Communication Controllers

Serial communication controllers are electronic devices that manage the input/output operations between a computer or microcontroller and other devices through serial communication protocols such as UART, SPI, I2C, and USB. These controllers provide an interface that allows the computer or microcontroller to send and receive data over a serial connection and manage the communication operations.

Serial communication controllers can be integrated into the computer or microcontroller's chipset or added as an external module. They typically include a serial interface that connects to the device and a host interface that connects to the computer or microcontroller's bus system. The serial interface can be based on various standards such as UART, SPI, or I2C, while the host interface can be based on various standards such as PCI, PCIe, or USB.

Serial communication controllers offer various benefits such as increased data transfer rates, improved reliability, and increased compatibility with a wide range of devices. They also provide advanced features such as error checking, flow control, and clock synchronization that can improve the accuracy and reliability of the communication.