562 ohm Fixed Resistors 5

Reset All

Part	Manufacturer	Resistor Type	Mounting Type	Resistance	Rated Power Dissipation (P)	Maximum Operating Temperature	Tolerance	Rated Temperature	Technology	Shape (Package)	Construction	Packing Method	Size Code	No. of Terminals	Package Style (Meter)	Terminal Shape	Sub-Category	Minimum Operating Temperature	Temperature Coef (ppm/Cel)	Terminal Finish	Height (Package)	Operating Voltage	Additional Features	Length (Package)	JESD-609 Code	Series	Reference Standard	Width (Package)
RG1005P-5620-C-T10	Susumu	FIXED RESISTOR		562 ohm	.125 W	155 Cel	.25 %		THIN FILM		Chip	Tape, Embossed	0402	2	SMT		FIXED RESISTOR	-55 Cel	25	Matte Tin (Sn)	.35 mm	75 V		1 mm	e3	RG	AEC-Q200	.5 mm
RNCF2010BTC562R	Stackpole Electronics	FIXED RESISTOR	SURFACE MOUNT	562 ohm	.33 W	155 Cel	.1 %	70 Cel	THIN FILM	RECTANGULAR PACKAGE	Rectangular	TR, EMBOSSED PLASTIC, 7 INCH	2010	2	SMT	WRAPAROUND		-55 Cel	50	Matte Tin (Sn) - with Nickel (Ni) barrier	.55 mm	200 V		4.9 mm	e3		AEC-Q200	2.4 mm
RC1206FR-7W562RL	Yageo	FIXED RESISTOR	SURFACE MOUNT	562 ohm	.5 W	155 Cel	1 %	70 Cel	METAL GLAZE/THICK FILM		Rectangular	TR, PAPER, 7 INCH	1206	2	SMT	WRAPAROUND		-55 Cel	200	Matte Tin (Sn) - with Nickel (Ni) barrier	.55 mm	200 V	LASER TRIMMABLE	3.1 mm	e3			1.6 mm
MCR10ERTF5620	ROHM	FIXED RESISTOR	SURFACE MOUNT	562 ohm	.125 W	155 Cel	1 %	70 Cel	METAL GLAZE/THICK FILM	RECTANGULAR PACKAGE	Chip	TR, PAPER, 7 INCH	0805	2	SMT	WRAPAROUND	FIXED RESISTOR	-55 Cel	100	Tin (Sn) - with Nickel (Ni) barrier	.5 mm	150 V		2 mm	e3		TS 16949	1.25 mm
MCR03EZPFX5620	ROHM	FIXED RESISTOR	SURFACE MOUNT	562 ohm	.1 W	155 Cel	1 %	70 Cel	METAL GLAZE/THICK FILM	RECTANGULAR PACKAGE	Rectangular	TR, Paper, 7 Inch	0603	2	SMT	WRAPAROUND		-55 Cel	100	TIN OVER NICKEL	.45 mm	50 V		1.6 mm	e3			.8 mm

Fixed Resistors

Fixed resistors are passive electronic components that are used to resist the flow of electric current in a circuit. They have a fixed value of resistance, meaning their resistance cannot be adjusted once they are manufactured. They are commonly used to set the bias of transistors, control the gain of amplifiers, or limit the current flowing through an LED. Fixed resistors come in various sizes, power ratings, and tolerances.

There are two types of fixed resistors: through-hole and surface mount. Through-hole resistors have leads that are inserted into holes on the printed circuit board (PCB), while surface mount resistors have terminals that are soldered directly to the surface of the PCB. Through-hole resistors are larger and easier to work with, but surface mount resistors are smaller and more suitable for miniaturized electronic devices.

Fixed resistors can be made from a variety of materials, including carbon, metal, and wire-wound. Carbon resistors are inexpensive and widely used, but they have a lower tolerance and are more susceptible to noise than other types. Metal film resistors have a higher tolerance and better stability, making them ideal for use in precision circuits. Wire-wound resistors have a higher power rating and are used in high power applications, such as power supplies and amplifiers.