16 RF/Microwave Switches 9

Reset All

Part	Manufacturer	RF or Microwave Device Type	Mounting Feature	No. of Terminals	Package Body Material	Technology	No. of Functions	Maximum Input Power (CW)	Maximum Voltage Standing Wave Ratio	Maximum Supply Current	Compression Point (1 dB)	Construction	Power Supplies (V)	Package Equivalence Code	Characteristic Impedance	Sub-Category	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Minimum Isolation	Maximum Insertion Loss	Additional Features	Nominal On Time	JESD-609 Code	Minimum Operating Frequency	Maximum Operating Frequency	Port Termination
SKY13384-350LF	Skyworks Solutions	DIVERSITY SWITCH	SURFACE MOUNT	16	PLASTIC/EPOXY	GAAS	1	31.99 dBm			30 dBm	COMPONENT	5	LCC16,.12SQ,20	50 ohm	RF/Microwave Switches	85 Cel	-40 Cel		30 dB	1.5 dB	TTL COMPATIBLE	.1 us		20 MHz	4000 MHz	ABSORPTIVE
HMC349LP4CE	Hittite Microwave	SPDT	SURFACE MOUNT	16	PLASTIC/EPOXY	GAAS	1	30 dBm			31 dBm	COMPONENT	5	LCC16,.16SQ,25	50 ohm	RF/Microwave Switches	85 Cel	-40 Cel	Matte Tin (Sn)	55 dB	1.7 dB	HIGH ISOLATION	.12 us	e3	0 MHz	4000 MHz	ABSORPTIVE
AS204-80LF	Skyworks Solutions	SP4T	SURFACE MOUNT	16	PLASTIC/EPOXY	GAAS	1	29.03 dBm	1.5		26 dBm	COMPONENT	5	SSOP16,.25	50 ohm	RF/Microwave Switches	85 Cel	-40 Cel	Matte Tin (Sn)	22 dB	1.2 dB	HIGH ISOLATION	.125 us	e3	300 MHz	3500 MHz	ABSORPTIVE
HMC427ALP3E	Analog Devices	TRANSFER SWITCH	SURFACE MOUNT	16	PLASTIC/EPOXY		1	25.5 dBm		.01 mA	26 dBm	COMPONENT	5	LCC16,.12SQ,20	50 ohm		85 Cel	-40 Cel		35 dB	2.1 dB		.01 us		0 MHz	8000 MHz	ABSORPTIVE
ADRF5132BCPZN-R7	Analog Devices	DIVERSITY SWITCH	SURFACE MOUNT	16	PLASTIC/EPOXY		1	43 dBm				COMPONENT	5	LCC16,.12SQ,20	50 ohm		105 Cel	-40 Cel					.55 us		700 MHz	5000 MHz	REFLECTIVE
ADRF5132BCPZN	Analog Devices	DIVERSITY SWITCH	SURFACE MOUNT	16	PLASTIC/EPOXY		1	43 dBm				COMPONENT	5	LCC16,.12SQ,20	50 ohm		105 Cel	-40 Cel					.55 us		700 MHz	5000 MHz	REFLECTIVE
HMC344ATCPZ-EP-PT	Analog Devices	SP4T	SURFACE MOUNT	16		GAAS	1	19 dBm		6 mA	25 dBm	COMPONENT	-3/-5	LCC16,.12SQ,20	50 ohm		125 Cel	-55 Cel		28 dB	2.5 dB		.075 us		100 MHz	8000 MHz	ABSORPTIVE
HMC344ATCPZ-EP-R7	Analog Devices	SP4T	SURFACE MOUNT	16		GAAS	1	19 dBm		6 mA	25 dBm	COMPONENT	-3/-5	LCC16,.12SQ,20	50 ohm		125 Cel	-55 Cel		28 dB	2.5 dB		.075 us		100 MHz	8000 MHz	ABSORPTIVE
ADRF5019BCPZN	Analog Devices	DIVERSITY SWITCH	SURFACE MOUNT	16	PLASTIC/EPOXY		1	23 dBm			28 dBm	COMPONENT	3.3	LCC16,.12SQ,20	50 ohm		105 Cel	-40 Cel					.285 us		100 MHz	13000 MHz

RF/Microwave Switches

RF/microwave switches are electronic components used to selectively route high-frequency signals between input and output ports. These switches are essential building blocks in radio communication systems, test and measurement equipment, and radar systems. RF/microwave switches are designed to operate in a specific frequency range, and their performance is characterized by parameters such as insertion loss, isolation, and switching speed.

There are different types of RF/microwave switches, including electromechanical switches, PIN diode switches, and solid-state switches. Electromechanical switches use mechanical contacts to switch between input and output ports, while PIN diode switches and solid-state switches use electronic control signals to route signals between different ports. PIN diode switches are suitable for lower power applications, while solid-state switches are capable of handling higher power levels.

RF/microwave switches can be classified based on their configuration and functionality. Single-pole single-throw (SPST) switches have a single input and a single output and can switch between two states, while single-pole double-throw (SPDT) switches have a single input and two outputs and can switch between two output ports. Multi-throw switches have more than two output ports and can switch between multiple states. Switches can also be classified as absorptive or reflective, depending on their ability to absorb or reflect the input signal when it is not being routed to the output port.