6 RF/Microwave Switches 13

Reset All

Part	Manufacturer	RF or Microwave Device Type	Mounting Feature	No. of Terminals	Package Body Material	Technology	No. of Functions	Maximum Input Power (CW)	Compression Point (1 dB)	Construction	Power Supplies (V)	Package Equivalence Code	Sub-Category	Maximum Operating Temperature	Minimum Operating Temperature	Minimum Isolation	Maximum Insertion Loss	Additional Features	Nominal On Time	Minimum Operating Frequency	Maximum Operating Frequency
UPG2189TB-E4-A	Renesas Electronics	SPST	SURFACE MOUNT	6	PLASTIC/EPOXY	GAAS	1				2.6	TSSOP6,.08	RF/Microwave Switches	85 Cel	-45 Cel	7.5 dB	.65 dB		1.5 us		2500 MHz
UPG2406TB-A	Renesas Electronics	SPDT	SURFACE MOUNT	6	PLASTIC/EPOXY	GAAS	1		25 dBm		1.8/2.7	TSSOP6,.08	RF/Microwave Switches	85 Cel	-45 Cel	14 dB	.62 dB		.05 us		3000 MHz
UPG2409TB-A	Renesas Electronics	SPDT	SURFACE MOUNT	6	PLASTIC/EPOXY	GAAS	1		35 dBm		3	TSSOP6,.08	RF/Microwave Switches	85 Cel	-45 Cel	16 dB	.85 dB		.1 us		3800 MHz
UPG2415T6X-A	Renesas Electronics	SPDT	SURFACE MOUNT	6	PLASTIC/EPOXY	GAAS	1		35 dBm		3	SOLCC6,.06,20	RF/Microwave Switches	85 Cel	-45 Cel	22 dB	.8 dB		.05 us		6000 MHz
UPG2164T5N-A	Renesas Electronics	DPDT	SURFACE MOUNT	6	PLASTIC/EPOXY	GAAS	1		29 dBm		3	SOLCC6,.06,20	RF/Microwave Switches	85 Cel	-45 Cel	14 dB	1 dB				6000 MHz
UPG2162T5N-A	Renesas Electronics	DPDT	SURFACE MOUNT	6	PLASTIC/EPOXY	GAAS	1		29 dBm		3	SOLCC6,.06,20	RF/Microwave Switches	85 Cel	-45 Cel	24 dB	1.1 dB		.15 us		6000 MHz
UPG2155TB-A	Renesas Electronics	SPDT	SURFACE MOUNT	6	PLASTIC/EPOXY	GAAS	1		37.5 dBm		2.6	TSSOP6,.08	RF/Microwave Switches	85 Cel	-45 Cel	15 dB	.55 dB				2500 MHz
UPG2415TK-A	Renesas Electronics	SPDT	SURFACE MOUNT	6	PLASTIC/EPOXY	GAAS	1		34 dBm		3	FL6,.047,20	RF/Microwave Switches	85 Cel	-45 Cel	22 dB	.9 dB		.05 us		6000 MHz
UPG2176T5N-A	Renesas Electronics	SPDT	SURFACE MOUNT	6	PLASTIC/EPOXY	GAAS	1		37 dBm		3	SOLCC6,.06,20	RF/Microwave Switches	85 Cel	-45 Cel	17 dB	.95 dB		.1 us		5850 MHz
UPG2163T5N-A	Renesas Electronics	SPDT	SURFACE MOUNT	6	PLASTIC/EPOXY	GAAS	1		29 dBm		3	SOLCC6,.06,20	RF/Microwave Switches	85 Cel	-45 Cel	27 dB	.8 dB		.05 us		6000 MHz
UPG2406TK-A	Renesas Electronics	SPDT	SURFACE MOUNT	6	PLASTIC/EPOXY	GAAS	1		30.5 dBm		1.8/2.7	FL6,.047,20	RF/Microwave Switches	85 Cel	-45 Cel	14 dB	.62 dB		.05 us		3000 MHz
UPG2408TK-E2-A	Renesas Electronics	DIVERSITY SWITCH	SURFACE MOUNT	6	PLASTIC/EPOXY	GAAS	1	32.99 dBm		COMPONENT	3	FL6,.047,20	RF/Microwave Switches	85 Cel	-45 Cel	14 dB	.7 dB	HIGH ISOLATION		50 MHz	3000 MHz
UPD5713TK-A	Renesas Electronics	DIVERSITY SWITCH	SURFACE MOUNT	6	PLASTIC/EPOXY	CMOS	1	23.01 dBm	21 dBm	COMPONENT	2.8	FL6,.047,20	RF/Microwave Switches	85 Cel	-45 Cel	20 dB	1.2 dB	HIGH ISOLATION		50 MHz	2500 MHz

RF/Microwave Switches

RF/microwave switches are electronic components used to selectively route high-frequency signals between input and output ports. These switches are essential building blocks in radio communication systems, test and measurement equipment, and radar systems. RF/microwave switches are designed to operate in a specific frequency range, and their performance is characterized by parameters such as insertion loss, isolation, and switching speed.

There are different types of RF/microwave switches, including electromechanical switches, PIN diode switches, and solid-state switches. Electromechanical switches use mechanical contacts to switch between input and output ports, while PIN diode switches and solid-state switches use electronic control signals to route signals between different ports. PIN diode switches are suitable for lower power applications, while solid-state switches are capable of handling higher power levels.

RF/microwave switches can be classified based on their configuration and functionality. Single-pole single-throw (SPST) switches have a single input and a single output and can switch between two states, while single-pole double-throw (SPDT) switches have a single input and two outputs and can switch between two output ports. Multi-throw switches have more than two output ports and can switch between multiple states. Switches can also be classified as absorptive or reflective, depending on their ability to absorb or reflect the input signal when it is not being routed to the output port.