PANEL MOUNT-THREADED Rotary Switches 58

Reset All

Part	Manufacturer	Switch Type	Mounting Feature	Switch Function	Type (Actuator)	AC Maximum Rating R Load (Contact)	Center Contact Plating	Dielectric Withstand Volts (V)	Terminal Material	Electrical Life	Insulation Resistance	Body Length/Diameter	Body Width	Sealing	No. of Switch Sections	Contact Timing	Insulator Material	End Contact Plating	Body Height	DC Maximum Rating R Load (Contact)	Maximum Operating Temperature	Maximum AC Contact Current	Center Contact Material	Minimum Operating Temperature	Terminal Finish	Switch Action	Maximum DC Contact Current	Termination Type	Contact Resistance	End Contact Material	No. of Positions	Maximum DC Contact Voltage	Maximum AC Contact Voltage	JESD-609 Code	Indexing Angle	Type (Bushing)
44S30-06-1-12N-F	Grayhill	ROTARY SWITCH	PANEL MOUNT-THREADED	SP12T	SINGLE SHAFT TYPE	1A@115VAC				6000 Cycle(s)		29.51 mm			6				76.33 mm	1A@28VDC		1 A			TIN	LATCHED	1 A	SCREW			12	28 V	115 V	e3	30 deg
56S36-01-1-10S-C	Grayhill	ROTARY SWITCH	PANEL MOUNT-THREADED	SP10T	SHAFT TYPE	.2A@115VAC						12.7 mm		SHAFT AND PANEL SEALED	1				9.01 mm	.2A@30VDC		.2 A			Gold (Au) - with Nickel (Ni) barrier	LATCHED	.2 A	SOLDER			10	30 V	115 V	e4	36 deg
50KST36-01-1-10N	Grayhill	ROTARY SWITCH	PANEL MOUNT-THREADED	SP10T	SHAFT TYPE	.15A@115VAC				25000 Cycle(s)		12.7 mm		SHAFT AND PANEL SEALED	1				14.63 mm	.2A@28VDC		.15 A			GOLD OVER NICKEL	LATCHED	.2 A	SOLDER			10	28 V	115 V	e4	36 deg
51A22-01-1-16N-F	Grayhill	ROTARY SWITCH	PANEL MOUNT-THREADED	SP16T	SHAFT TYPE	.15A@115VAC				25000 Cycle(s)		14.27 mm			1				13.64 mm	.2A@28VDC		.15 A			GOLD OVER NICKEL	LATCHED	.2 A	SOLDER			10	28 V	115 V	e4	22.5 deg
53HS15-02-12-02S	Grayhill	ROTARY SWITCH	PANEL MOUNT-THREADED	12PDT	SHAFT TYPE	.15A@115VAC				10000 Cycle(s)		32.54 mm		SHAFT AND PANEL SEALED	1				30.91 mm	.25A@28VDC		.15 A			GOLD OVER NICKEL	LATCHED	.25 A	SOLDER			2	28 V	115 V	e4	15 deg
D7C0405N	Electro Switch	ROTARY SWITCH	PANEL MOUNT-THREADED	DP6T	ROUND TYPE	2.25A@115VAC	SILVER	1500VAC	BRASS	25000 Cycle(s)	1000000000000 ohm	1.875 mm	1.719 inch		2	BREAK-BEFORE-MAKE	CERAMIC	SILVER	1.722 mm	2.25A@28VDC	125 Cel	2.25 A	BRASS	-65 Cel		LATCHED	2.25 A	SOLDER	3 mohm	BRASS	6	28 V	115 V		30 deg	3/8-32
09A30-07-1-06N	Grayhill	ROTARY SWITCH	PANEL MOUNT-THREADED	SP6T	STANDARD TYPE	.25A@115VAC				50000 Cycle(s)		15.88 mm			1				71.58 mm	.25A@28VDC		.25 A			Gold (10) Over Silver (300)	LATCHED	.25 A	SOLDER			6	28 V	115 V		30 deg
42A36-04-1-09N	Grayhill	ROTARY SWITCH	PANEL MOUNT-THREADED	SPST		1A@115VAC						25.4 mm			1				52.4 mm	1A@28VDC		1 A				LATCHED	1 A	SOLDER			9	28 V	115 V		36 deg
M3786/4-0957	Defense Logistics Agency	ROTARY SWITCH	PANEL MOUNT-THREADED	SP6T	FLAT SHAFT TYPE	2A@115VAC				10000 Cycle(s)		29.97 mm		EXPLOSION PROOF	2				34.83 mm	1.25A@28VDC		2 A				LATCHED	1.25 A	SOLDER			6	28 V	115 V		45 deg
093121-5-02N	Grayhill	ROTARY SWITCH	PANEL MOUNT-THREADED		FLAT SHAFT TYPE					10000 Cycle(s)									24.38 mm						GOLD			WIRE

Rotary Switches

Rotary switches are electronic switches that are activated by rotating a dial or knob. They are commonly used in a variety of applications, such as audio equipment, industrial control systems, and consumer electronics.

Rotary switches typically consist of a housing, a dial or knob, and a set of electrical contacts. When the dial or knob is rotated, it completes a circuit between the contacts, allowing electrical current to flow through the switch. Some rotary switches also include detents or stops that provide tactile feedback as the dial is rotated.

Rotary switches come in different configurations, including single-pole, double-pole, and multi-pole switches. They also come in different contact arrangements, such as make-before-break, break-before-make, and center-off switches.

Rotary switches offer several advantages over other types of switches. They provide a simple and intuitive means of controlling circuits, and they offer tactile feedback that can help to ensure reliable operation. They are also highly durable and can withstand frequent use and harsh environments.