DP3T Rotary Switches 5

Reset All

Part	Manufacturer	Switch Type	Mounting Feature	Switch Function	Type (Actuator)	Contact Function	Solderability	AC Maximum Rating R Load (Contact)	Center Contact Plating	Color (Actuator)	Housing Material	Dielectric Withstand Volts (V)	Terminal Material	Electrical Life	DC Maximum Power Rating R Load (Contact)	Insulation Resistance	Body Length/Diameter	Body Width	Length (Bushing)	Sealing	No. of Switch Sections	Contact Timing	Insulator Material	End Contact Plating	Body Height	DC Maximum Rating R Load (Contact)	Maximum Operating Temperature	Maximum AC Contact Current	Center Contact Material	Minimum Operating Temperature	Length (Actuator)	Terminal Finish	Switch Action	Maximum DC Contact Current	Termination Type	Contact Resistance	Diameter (Bushing)	End Contact Material	PCB Hole Count	No. of Positions	Maximum DC Contact Voltage	Additional Features	Maximum AC Contact Voltage	JESD-609 Code	Indexing Angle	Type (Bushing)	Terminal Length	Material (Actuator)
MRB24B	Nkk Switches	ROTARY SWITCH	THROUGH HOLE-STRAIGHT	DP3T	ROTARY	ON-ON-ON	WAVE		GOLD			500VAC	BRASS	10000 Cycle(s)	0.4VA@28VDC	100000000 ohm	15.748 mm	14.5034 inch	.276 inch			BREAK-BEFORE-MAKE		GOLD	10.9982 mm		70 Cel		BERYLLIUM COPPER	-10 Cel	.394 inch	TIN	CIRCULAR		SOLDER	80 mohm		COPPER	12					e3	45 deg	M6P0.75	.138 inch	BRASS
MRB24H	Nkk Switches	ROTARY SWITCH	THROUGH HOLE-RIGHT ANGLE	DP3T	ROTARY	ON-ON-ON	WAVE		GOLD			500VAC	BRASS	10000 Cycle(s)	0.4VA@28VDC	100000000 ohm	15.748 mm	16.3068 inch	.276 inch			BREAK-BEFORE-MAKE		GOLD	15.0876 mm		70 Cel		BERYLLIUM COPPER	-10 Cel	.394 inch	TIN	CIRCULAR		SOLDER	80 mohm		COPPER	12					e3	45 deg	M6P0.75	.138 inch	BRASS
75CP36-01-2-03N	Grayhill	ROTARY SWITCH	THROUGH HOLE-STRAIGHT	DP3T	INTEGRAL KNOB TYPE			.2A@115VAC	GOLD	RED		500VRMS	BRASS	10000 Cycle(s)		10000000000 ohm	7.57 mm				1		DIALLYL PHTHALATE	GOLD	9.5 mm	.2A@30VDC		.2 A	SILVER CADMIUM OXIDE		.115 inch	GOLD	LATCHED	.2 A	SOLDER	50 mohm		BRASS	10	3	30 V		115 V	e4	36 deg		.109 inch
42M36-01-2-03N	Grayhill	ROTARY SWITCH	PANEL MOUNT	DP3T	SINGLE SHAFT TYPE			.075A@115VAC						25000 Cycle(s)			25.4 mm				1				26.04 mm	.25A@28VDC		.075 A				TIN	LATCHED	.25 A	SCREW					3	28 V		115 V	e3	36 deg
56S36-01-2-03N	Grayhill	ROTARY SWITCH	PANEL MOUNT	DP3T	ROTARY SHAFT			.2A@115VAC	SILVER OVER NICKEL		ZINC DIE CAST	600VAC	BRASS	10000 Cycle(s)		10000000000 ohm	12.7 mm		.25 inch	SHAFT AND PANEL SEALED	1		THERMOSET 94V-0	GOLD	9.01 mm	.2A@30VDC		.2 A	BRASS		.375 inch	GOLD	LATCHED	.2 A	SOLDER	100 mohm	.25 inch	BRASS		3	30 V	INDUSTRIAL QUALITY	115 V	e4	36 deg	1/4-28	.125 inch	ZINC DIE CAST

Rotary Switches

Rotary switches are electronic switches that are activated by rotating a dial or knob. They are commonly used in a variety of applications, such as audio equipment, industrial control systems, and consumer electronics.

Rotary switches typically consist of a housing, a dial or knob, and a set of electrical contacts. When the dial or knob is rotated, it completes a circuit between the contacts, allowing electrical current to flow through the switch. Some rotary switches also include detents or stops that provide tactile feedback as the dial is rotated.

Rotary switches come in different configurations, including single-pole, double-pole, and multi-pole switches. They also come in different contact arrangements, such as make-before-break, break-before-make, and center-off switches.

Rotary switches offer several advantages over other types of switches. They provide a simple and intuitive means of controlling circuits, and they offer tactile feedback that can help to ensure reliable operation. They are also highly durable and can withstand frequent use and harsh environments.