HEXADECIMAL Rotary Switches 7

Reset All

Part	Manufacturer	Switch Type	Mounting Feature	Switch Function	Type (Actuator)	Contact Function	Solderability	AC Maximum Rating R Load (Contact)	Center Contact Plating	Housing Material	Dielectric Withstand Volts (V)	Terminal Material	Electrical Life	DC Maximum Power Rating R Load (Contact)	Insulation Resistance	Packing Method	Body Length/Diameter	Body Width	Length (Bushing)	Sealing	No. of Switch Sections	Contact Timing	Insulator Material	End Contact Plating	Body Height	DC Maximum Rating R Load (Contact)	Washability	Maximum Operating Temperature	Maximum AC Contact Current	Center Contact Material	Minimum Operating Temperature	Length (Actuator)	Terminal Finish	Switch Action	Maximum DC Contact Current	Termination Type	Manufacturer Series	Contact Resistance	End Contact Material	PCB Hole Count	No. of Positions	Maximum DC Contact Voltage	Additional Features	Maximum AC Contact Voltage	JESD-609 Code	Indexing Angle	Terminal Length	Material (Actuator)
A6A-16RF	Omron	ROTARY CODED SWITCH	THROUGH HOLE-STRAIGHT	HEXADECIMAL	FLAT TYPE	ON-ON			GOLD OVER SILVER		500VAC	BERYLLIUM COPPER	2000 Cycle(s)		10000000 ohm		10 mm	10 inch	0 inch		1	BREAK-BEFORE-MAKE	POLYBUTYLENE TEREPHTHALATE	GOLD OVER SILVER	5.9 mm	.1A@28VDC		70 Cel		PHOSPHOR BRONZE	-10 Cel	0 inch		LATCHED	.1 A	SOLDER		200 mohm	PHOSPHOR BRONZE	5	16	28 V	WITH O-RING			22.5 deg	.126 inch	POLYACETAL
A6A-16RS	Omron	ROTARY CODED SWITCH	THROUGH HOLE-STRAIGHT	HEXADECIMAL	SHAFT TYPE	ON-ON			GOLD OVER SILVER		500VAC	BERYLLIUM COPPER	2000 Cycle(s)		10000000 ohm		10 mm	10 inch	0 inch		1	BREAK-BEFORE-MAKE	POLYBUTYLENE TEREPHTHALATE	GOLD OVER SILVER	5.9 mm	.1A@28VDC		70 Cel		PHOSPHOR BRONZE	-10 Cel	.287 inch		LATCHED	.1 A	SOLDER		200 mohm	PHOSPHOR BRONZE	5	16	28 V	WITH O-RING			22.5 deg	.126 inch	POLYACETAL
A6A-16RW	Omron	ROTARY CODED SWITCH	THROUGH HOLE-STRAIGHT	HEXADECIMAL	THUMBWHEEL TYPE	ON-ON			GOLD OVER SILVER		500VAC	BERYLLIUM COPPER	2000 Cycle(s)		10000000 ohm		10 mm	10 inch	0 inch		1	BREAK-BEFORE-MAKE	POLYBUTYLENE TEREPHTHALATE	GOLD OVER SILVER	5.9 mm	.1A@28VDC		70 Cel		PHOSPHOR BRONZE	-10 Cel	.287 inch		LATCHED	.1 A	SOLDER		200 mohm	PHOSPHOR BRONZE	5	16	28 V	WITH O-RING				.126 inch	POLYACETAL
PT65503L254	Apem Components	ROTARY CODED SWITCH	THROUGH HOLE-RIGHT ANGLE	HEXADECIMAL	SEGMENT WHEEL	ON-OFF	WAVE		GOLD OVER NICKEL			BRASS	10000 Cycle(s)	1.5VA@24VDC	100000000 ohm	TRAY	10 mm	6.5 inch	0 inch	MOLDED	1	BREAK-BEFORE-MAKE	THERMOPLASTIC	GOLD OVER NICKEL	10 mm	.4A@24VDC	SOLVENT	70 Cel		PHOSPHOR BRONZE	-20 Cel	.173 inch	Matte Tin (Sn)	LATCHED	.4 A	SOLDER	PT65	80 mohm	PHOSPHOR BRONZE	6	16	24 V	O-RING Si RUBBER ACTUATOR SEAL		e3	22.5 deg		NYLON
P36S103TR	Apem Components	ROTARY CODED SWITCH	SURFACE MOUNT-STRAIGHT	HEXADECIMAL	SCREW DRIVER											TAPE AND REEL	7.4 mm	7.4 inch		WATERPROOF	1				3.65 mm	.4A@24VDC		90 Cel			-30 Cel		Matte Tin (Sn)	LATCHED	.4 A	SOLDER	P36				16	24 V			e3
3-1825033-1	TE Connectivity	ROTARY CODED SWITCH	PANEL MOUNT	HEXADECIMAL	WHEEL			.02A@20VAC	GOLD OVER NICKEL	POLYETHYLENE			10000 Cycle(s)			TUBE	10.01 mm	10.01 inch			16			GOLD OVER NICKEL	5.99 mm	.02A@20VDC		85 Cel	.4 A		-30 Cel			LATCHED	.4 A	WIRE			COPPER ALLOY		16	20 V		20 V
2-1825007-0	TE Connectivity	ROTARY CODED SWITCH	PANEL MOUNT	HEXADECIMAL	FLUSH TYPE			.02A@20VAC	GOLD OVER NICKEL	POLYETHYLENE			10000 Cycle(s)			TR	10.01 mm	10.01 inch			16			GOLD OVER NICKEL	5.99 mm	.02A@20VDC		85 Cel	.4 A		-30 Cel			LATCHED	.4 A	WIRE			COPPER ALLOY		16	20 V		20 V

Rotary Switches

Rotary switches are electronic switches that are activated by rotating a dial or knob. They are commonly used in a variety of applications, such as audio equipment, industrial control systems, and consumer electronics.

Rotary switches typically consist of a housing, a dial or knob, and a set of electrical contacts. When the dial or knob is rotated, it completes a circuit between the contacts, allowing electrical current to flow through the switch. Some rotary switches also include detents or stops that provide tactile feedback as the dial is rotated.

Rotary switches come in different configurations, including single-pole, double-pole, and multi-pole switches. They also come in different contact arrangements, such as make-before-break, break-before-make, and center-off switches.

Rotary switches offer several advantages over other types of switches. They provide a simple and intuitive means of controlling circuits, and they offer tactile feedback that can help to ensure reliable operation. They are also highly durable and can withstand frequent use and harsh environments.