DPDT Slide Switches 22

Reset All

Part	Manufacturer	Switch Type	Mounting Feature	Switch Function	Type (Actuator)	Contact Function	Solderability	AC Maximum Rating R Load (Contact)	Center Contact Plating	Color (Actuator)	Housing Material	Body Color	Angle (Actuator)	Dielectric Withstand Volts (V)	Terminal Material	Electrical Life	DC Maximum Power Rating R Load (Contact)	Insulation Resistance	Packing Method	Body Length/Diameter	Body Width	Sealing	Contact Timing	Maximum Operating Force	Insulator Material	End Contact Plating	Body Height	DC Maximum Rating R Load (Contact)	Washability	Maximum Operating Temperature	Maximum AC Contact Current	Center Contact Material	Minimum Operating Temperature	Length (Actuator)	Terminal Finish	Switch Action	Maximum DC Contact Current	Termination Type	No. of Independent Keys	Manufacturer Series	Contact Resistance	Actuator Travel (mm)	End Contact Material	PCB Hole Count	No. of Positions	Maximum DC Contact Voltage	Additional Features	Maximum AC Contact Voltage	JESD-609 Code	Terminal Length	AC Maximum Power Rating R Load (Contact)	Material (Actuator)
EG1390A	E-switch		SURFACE MOUNT-STRAIGHT	DPDT	SLIDE				SILVER					100VAC		10000 Cycle(s)		100000000 ohm		7.1882 mm	3.5052 inch					SILVER	1.4986 mm	0.3A@4VDC		60 Cel			-10 Cel	.039 inch			.3 A	SOLDER		EG	70 mohm				1	4 V
L202011MS02B	C & K Components	SLIDE SWITCH	THROUGH HOLE-STRAIGHT	DPDT	HIGH TYPE			.02A@20VAC	GOLD OVER NICKEL		NYLON	BLACK		1000VRMS	COPPER	10000 Cycle(s)		1000000000 ohm		19.3 mm	10.79 inch				NYLON	GOLD OVER NICKEL	7.32 mm	.02A@20VDC		65 Cel	.02 A	COPPER	-30 Cel	.2 inch	GOLD OVER NICKEL	LATCHED	.02 A	SOLDER			10 mohm		COPPER		1	20 V		20 V	e4	.166 inch	0.4VA@20VAC	NYLON
L202011SS03Q	C & K Components	SLIDE SWITCH	PANEL MOUNT	DPDT	HIGH TYPE			4A@125VAC	SILVER		NYLON	BLACK		1000VRMS	COPPER	10000 Cycle(s)		1000000000 ohm		19.3 mm	10.6 inch				NYLON	SILVER	9.09 mm	4A@28VDC		65 Cel	4 A	COPPER	-30 Cel	.2 inch	SILVER	LATCHED	4 A	SOLDER			10 mohm		COPPER		1	28 V		125 V	e4			NYLON
L202021MA04Q	C & K Components	SLIDE SWITCH	THROUGH HOLE-RIGHT ANGLE	DPDT	HIGH TYPE			4A@125VAC	SILVER		NYLON	BLACK		1000VRMS	COPPER	10000 Cycle(s)		1000000000 ohm		20.32 mm	13.97 inch				NYLON	SILVER	10.46 mm	4A@28VDC		65 Cel	4 A	COPPER	-30 Cel	.335 inch	SILVER	LATCHED	4 A	SOLDER			10 mohm		COPPER		1	28 V		125 V	e4	.171 inch		NYLON
CAS-220B	Nidec Copal Electronics	SLIDE SWITCH	SURFACE MOUNT-STRAIGHT	DPDT															BULK	5.4 mm	3.9 inch	TAPE SEALED; WATER PROOF		5 N			2.5 mm	.025A@24VDC		85 Cel			-40 Cel		Gold (Au)	LATCHED	.025 A	SOLDER								24 V	LOW PROFILE		e4
CAS-220B2	Nidec Copal Electronics	SLIDE SWITCH	SURFACE MOUNT-STRAIGHT	DPDT															BULK	5.4 mm	3.9 inch	TAPE SEALED		5 N			2.5 mm	.025A@24VDC		85 Cel			-40 Cel		Gold (Au)	LATCHED	.025 A	SOLDER								24 V	LOW PROFILE		e4
CAS-220A	Nidec Copal Electronics	SLIDE SWITCH	SURFACE MOUNT-STRAIGHT	DPDT															BULK	5.4 mm	3.9 inch	TAPE SEALED; WATER PROOF		5 N			2.5 mm	.025A@24VDC		85 Cel			-40 Cel		Gold (Au)	LATCHED	.025 A	SOLDER								24 V	LOW PROFILE		e4
CAS-220TB2	Nidec Copal Electronics	SLIDE SWITCH	SURFACE MOUNT-STRAIGHT	DPDT															TAPE AND REEL	5.4 mm	3.9 inch	TAPE SEALED		5 N			2.5 mm	.025A@24VDC		85 Cel			-40 Cel		Gold (Au)	LATCHED	.025 A	SOLDER								24 V	LOW PROFILE		e4
CAS-220TA2	Nidec Copal Electronics	SLIDE SWITCH	SURFACE MOUNT-STRAIGHT	DPDT															TAPE AND REEL	5.4 mm	3.9 inch	TAPE SEALED		5 N			2.5 mm	.025A@24VDC		85 Cel			-40 Cel		Gold (Au)	LATCHED	.025 A	SOLDER								24 V	LOW PROFILE		e4
CAS-220A1	Nidec Copal Electronics	SLIDE SWITCH	SURFACE MOUNT-STRAIGHT	DPDT															BULK	5.4 mm	3.9 inch			5 N			2.5 mm	.025A@24VDC		85 Cel			-40 Cel		Gold (Au)	LATCHED	.025 A	SOLDER								24 V	LOW PROFILE		e4
CAS-220B1	Nidec Copal Electronics	SLIDE SWITCH	SURFACE MOUNT-STRAIGHT	DPDT															BULK	5.4 mm	3.9 inch			5 N			2.5 mm	.025A@24VDC		85 Cel			-40 Cel		Gold (Au)	LATCHED	.025 A	SOLDER								24 V	LOW PROFILE		e4
CAS-220A2	Nidec Copal Electronics	SLIDE SWITCH	SURFACE MOUNT-STRAIGHT	DPDT															BULK	5.4 mm	3.9 inch	TAPE SEALED		5 N			2.5 mm	.025A@24VDC		85 Cel			-40 Cel		Gold (Au)	LATCHED	.025 A	SOLDER								24 V	LOW PROFILE		e4
CAS-220TB1	Nidec Copal Electronics	SLIDE SWITCH	SURFACE MOUNT-STRAIGHT	DPDT															TAPE AND REEL	5.4 mm	3.9 inch			5 N			2.5 mm	.025A@24VDC		85 Cel			-40 Cel		Gold (Au)	LATCHED	.025 A	SOLDER								24 V	LOW PROFILE		e4
MSSA22G	Apem Components	SLIDE SWITCH	THROUGH HOLE-STRAIGHT	DPDT	SLIDE		WAVE	.02A@20VAC	GOLD		THERMOPLASTIC		0 deg	250VRMS		10000 Cycle(s)	0.4VA@20VDC	100000000 ohm		9 mm	5.5 inch	EPOXY TERMINAL SEALED		3.92 N	THERMOPLASTIC	GOLD	3.4 mm	.02A@20VDC	PARTIAL	60 Cel	.02 A		-10 Cel	.079 inch	Gold (Au)	LATCHED	.02 A	SOLDER			30 mohm			6	2	20 V		20 V	e4	.118 inch		THERMOPLASTIC
1825010-2	TE Connectivity	SLIDE SWITCH	PANEL MOUNT	DPDT	EXTENDED TOP TYPE	ON-ON		.02A@20VAC	GOLD	NATURAL						15000 Cycle(s)			TUBE	10.16 mm	7.37 inch						4.45 mm	.3A@115VDC		80 Cel	.4 A		-40 Cel	.11 inch		LATCHED	.4 A	SOLDER	1			2.794	COPPER ALLOY			20 V		20 V				NYLON
1825010-7	TE Connectivity	SLIDE SWITCH	PANEL MOUNT	DPDT	EXTENDED TOP TYPE	ON-ON		.02A@20VAC	GOLD	NATURAL						15000 Cycle(s)			TUBE	10.16 mm	7.37 inch						4.46 mm	.02A@20VDC		80 Cel	.4 A		-40 Cel	.11 inch		LATCHED	.4 A	SOLDER	1			2.794	COPPER ALLOY			20 V		20 V				NYLON
SSA-22G	Abb Installation Products	SLIDE SWITCH	THROUGH HOLE-STRAIGHT	DPDT												10000 Cycle(s)				9 mm	5.5 inch	EPOXY TERMINAL SEALED		3.43 N			3.5 mm	.02A@20VDC		70 Cel			-20 Cel		GOLD	LATCHED	.02 A	SOLDER		SSA-22						20 V			e4
1571984-3	TE Connectivity	SLIDE SWITCH	PANEL MOUNT	DPDT	SIDE TYPE	ON-ON		.02A@20VAC	GOLD	BLACK		BLACK	0 deg	1000VAC	COPPER ALLOY	60000 Cycle(s)	0.4VA@20VDC	100000000 ohm		10.16 mm	5.74 inch			5.88 N		GOLD OVER NICKEL	9.7 mm	.02A@20VDC		80 Cel	.4 A	COPPER ALLOY	-20 Cel	.11 inch		LATCHED	.4 A	SOLDER	1		40 mohm		COPPER ALLOY	8	2	20 V		20 V		.13 inch		POLYESTER
ASE2D-6M-10-Z	Nidec Copal Electronics	SLIDE SWITCH	THROUGH HOLE-RIGHT ANGLE	DPDT	SLIDE	ON-ON		0.05A@60VAC	GOLD				0 deg	250VAC		50000 Cycle(s)	0.4VA@48VDC	500000000 ohm		9.4996 mm	5.588 inch					GOLD	10.541 mm	0.05A@60VDC		85 Cel	.05 A		-20 Cel	.11 inch			.05 A	SOLDER			50 mohm			8	1	60 V		60 V		.13 inch
MS22AFW01	Nkk Switches	SLIDE SWITCH	PANEL MOUNT	DPDT	SLIDE	ON-ON	WAVE	3A@250VAC	SILVER		STAINLESS STEEL		0 deg	1500VAC	COPPER ALLOY	25000 Cycle(s)		1000000000 ohm		12.7 mm	11.4046 inch	EPOXY	BREAK-BEFORE-MAKE		GLASS FILLED DIALLYL PHTHALATE	SILVER	17.1958 mm			70 Cel	3 A	SILVER	-10 Cel	.201 inch		HORIZONTAL		SOLDER LUG			10 mohm		SILVER		2			250 V		.177 inch
500SDP1S1M2QEA	E-switch	SLIDE SWITCH	THROUGH HOLE-STRAIGHT	DPDT	SLIDE	ON-OFF		2A@250VAC	SILVER		STAINLESS STEEL		0 deg		COPPER ALLOY			1000000000 ohm		12.7 mm	11.43 inch	EPOXY				SILVER	7.6962 mm	5A@28VDC		85 Cel	2 A	COPPER ALLOY	-30 Cel	.2 inch	Silver (Ag)	HORIZONTAL	5 A	SOLDER			100 mohm		COPPER ALLOY		2	28 V		250 V	e4	.189 inch		NYLON
452404020202	Wurth Elektronik	SLIDE SWITCH	THROUGH HOLE-STRAIGHT	DPDT												20000 Cycle(s)			BULK	9 mm	3.8 inch			4.41 N			3.5 mm	.3A@6VDC		85 Cel			-40 Cel			LATCHED	.3 A	SOLDER								6 V

Slide Switches

Slide switches are electronic switches that are activated by sliding a lever back and forth. They are commonly used in a variety of applications, such as consumer electronics, industrial control systems, and home appliances.

Slide switches typically consist of a housing, a slider lever, and a set of electrical contacts. When the lever is slid in one direction, it completes a circuit between the contacts, allowing electrical current to flow through the switch. When the lever is slid in the opposite direction, the circuit is broken and the current stops flowing.

Slide switches come in different configurations, including single-pole, double-pole, and multi-pole switches. They also come in different contact arrangements, such as make-before-break, break-before-make, and center-off switches.

Slide switches offer several advantages over other types of switches. They provide a simple and intuitive means of controlling circuits, and they offer tactile feedback that can help to ensure reliable operation. They are also highly durable and can withstand frequent use and harsh environments.