THROUGH HOLE-RIGHT ANGLE Snap Action & Limit Switches 63

Reset All

Part	Manufacturer	Switch Type	Mounting Feature	Switch Function	Type (Actuator)	AC Maximum Rating R Load (Contact)	Center Contact Plating	Dielectric Withstand Volts (V)	Terminal Material	Electrical Life	Insulation Resistance	Packing Method	Body Length/Diameter	Body Width	Sealing	Contact Timing	Maximum Operating Force	Body Height	DC Maximum Rating R Load (Contact)	Maximum Operating Temperature	Maximum AC Contact Current	Center Contact Material	Minimum Operating Temperature	Terminal Finish	Switch Action	Maximum DC Contact Current	Termination Type	Manufacturer Series	Actuator Travel (mm)	Maximum DC Contact Voltage	Additional Features	Maximum AC Contact Voltage	Maximum Pre Travel	JESD-609 Code
D2F-01L30-A1	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	SIMULATED ROLLER LEVER					30000 Cycle(s)			12.8 mm	6.5 inch	IP40		1.47 N	5.8 mm	.1A@30VDC	65 Cel			-25 Cel		MOMENTARY	.1 A	SOLDER			30 V
D2F-01L30-A	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	SIMULATED ROLLER LEVER					30000 Cycle(s)			12.8 mm	6.5 inch	IP40		1.47 N	5.8 mm	.1A@30VDC	65 Cel			-25 Cel		MOMENTARY	.1 A	SOLDER			30 V
D2F-FL30-A	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	SIMULATED ROLLER LEVER	1A@125VAC				30000 Cycle(s)			12.8 mm	6.5 inch	IP40		.74 N	5.8 mm	.5A@30VDC	65 Cel	1 A		-25 Cel		MOMENTARY	.5 A	SOLDER			30 V		125 V
D2F-L30-A1	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	SIMULATED ROLLER LEVER	3A@125VAC				30000 Cycle(s)			12.8 mm	6.5 inch	IP40		1.47 N	5.8 mm	2A@30VDC	65 Cel	3 A		-25 Cel		MOMENTARY	2 A	SOLDER			30 V		125 V
ZM10D20D01	Honeywell Sensing And Control	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	LONG STRAIGHT LEVER	.1A@125VAC				1000000 Cycle(s)			19.8 mm	10.6 inch			1.02 N	6.4 mm		120 Cel	.1 A		-40 Cel	Matte Tin (Sn)	MOMENTARY		SOLDER				MICRO SWITCH	125 V		e3
ZM50E20A01	Honeywell Sensing And Control	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	PIN PLUNGER	5A@250VAC				6000 Cycle(s)			19.8 mm	10.6 inch			1.43 N	6.4 mm		120 Cel	5 A		-40 Cel		MOMENTARY		SOLDER				MICRO SWITCH	250 V
ZM50E60B01	Honeywell Sensing And Control	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	SHORT STRAIGHT LEVER	5A@250VAC				6000 Cycle(s)			19.8 mm	10.6 inch			1.43 N	6.4 mm		120 Cel	5 A		-40 Cel	Matte Tin (Sn)	MOMENTARY		SOLDER	ZM			MICRO SWITCH	250 V		e3
ZX10C60A01	Honeywell Sensing And Control	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	PIN PLUNGER					1000000 Cycle(s)			12.7 mm	6.5 inch			.88 N	5.8 mm	.1A@48VDC	120 Cel			-40 Cel	GOLD	MOMENTARY	.1 A	SOLDER			48 V	MICRO SWITCH			e4
ZX40E50E01	Honeywell Sensing And Control	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	SIMULATED ROLLER LEVER	3A@125VAC				10000 Cycle(s)			12.7 mm	6.5 inch			1.47 N	5.8 mm		120 Cel	3 A		-40 Cel	Matte Tin (Sn)	MOMENTARY		SOLDER				MICRO SWITCH	125 V		e3
D2A-1110	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	PIN PLUNGER					50000 Cycle(s)			8 mm	4.2 inch	IP00		.98 N	6 mm	.1A@30VDC	80 Cel			-10 Cel		MOMENTARY	.1 A	SOLDER	D2A		30 V
AV452461	Panasonic	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	HINGE LEVER					200000 Cycle(s)			7.5 mm	4.5 inch			.25 N	2.5 mm	.1A@30VDC	80 Cel			-25 Cel		MOMENTARY	.1 A	SOLDER		2.8	30 V			2.4 mm
AV464461	Panasonic	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	SIMULATED ROLLER LEVER					200000 Cycle(s)			7.5 mm	2.5 inch			.29 N	4.5 mm	.1A@30VDC	80 Cel			-25 Cel		MOMENTARY	.1 A	SOLDER	AV4	2.5	30 V			2.2 mm
D2F-01-A1	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	PIN PLUNGER					30000 Cycle(s)			12.8 mm	6.5 inch	IP40		1.47 N	5.8 mm	.1A@30VDC	65 Cel			-25 Cel		MOMENTARY	.1 A	SOLDER		.75	30 V			.5 mm
D2F-01FL3-A	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	SIMULATED ROLLER LEVER					30000 Cycle(s)			12.8 mm	6.5 inch	IP40		.74 N	5.8 mm	.1A@30VDC	65 Cel			-25 Cel		MOMENTARY	.1 A	SOLDER		.5	30 V
D2F-01FL-A	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	HINGE LEVER					30000 Cycle(s)			12.8 mm	6.5 inch	IP40		.74 N	5.8 mm	.1A@30VDC	65 Cel			-25 Cel		MOMENTARY	.1 A	SOLDER		.55	30 V
D2F-01L2-A	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	HINGE ROLLER LEVER					30000 Cycle(s)			12.8 mm	6.5 inch	IP40		1.47 N	5.8 mm	.1A@30VDC	65 Cel			-25 Cel		MOMENTARY	.1 A	SOLDER		.55	30 V
D2F-01L3-A	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	SIMULATED ROLLER LEVER					30000 Cycle(s)			12.8 mm	6.5 inch	IP40		1.47 N	5.8 mm	.1A@30VDC	65 Cel			-25 Cel		MOMENTARY	.1 A	SOLDER		.5	30 V
D2F-F-A	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	PIN PLUNGER	1A@125VAC				30000 Cycle(s)			12.8 mm	6.5 inch	IP40		.74 N	5.8 mm	.5A@30VDC	65 Cel	1 A		-25 Cel		MOMENTARY	.5 A	SOLDER		.75	30 V		125 V	.5 mm
D2F-FL3-A	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	SIMULATED ROLLER LEVER	1A@125VAC				30000 Cycle(s)			12.8 mm	6.5 inch	IP40		.74 N	5.8 mm	.5A@30VDC	65 Cel	1 A		-25 Cel		MOMENTARY	.5 A	SOLDER		.5	30 V		125 V
D2F-FL3-A1	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	SIMULATED ROLLER LEVER	1A@125VAC				30000 Cycle(s)			12.8 mm	6.5 inch	IP40		.74 N	5.8 mm	.5A@30VDC	65 Cel	1 A		-25 Cel		MOMENTARY	.5 A	SOLDER		.5	30 V		125 V
D2F-L2-A	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	HINGE ROLLER LEVER	3A@125VAC				30000 Cycle(s)			12.8 mm	6.5 inch	IP40		1.47 N	5.8 mm	2A@30VDC	65 Cel	3 A		-25 Cel		MOMENTARY	2 A	SOLDER		.55	30 V		125 V
D2MQ-1L-TR	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	LEAF LEVER					10000 Cycle(s)		TR	8.2 mm	2.7 inch	IP40		.59 N	6.5 mm	.5A@30VDC	70 Cel			-15 Cel		MOMENTARY	.5 A	SOLDER		2.7	30 V			2.4 mm
D2MQ-1-TR	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	PIN PLUNGER					10000 Cycle(s)		TR	8.2 mm	6.5 inch	IP40		1.18 N	2.7 mm	.5A@30VDC	70 Cel			-15 Cel		MOMENTARY	.5 A	SOLDER		.5	30 V			.4 mm
D2F-01FL-A1	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	HINGE LEVER	A@VAC				30000 Cycle(s)			12.8 mm	6.5 inch	IP40		.74 N	5.8 mm	.1A@30VDC	65 Cel			-25 Cel		MOMENTARY	.1 A	SOLDER		.55	30 V
D2F-01FL3-A1	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	SIMULATED ROLLER LEVER	A@VAC				30000 Cycle(s)			12.8 mm	6.5 inch	IP40		.74 N	5.8 mm	.1A@30VDC	65 Cel			-25 Cel		MOMENTARY	.1 A	SOLDER		.5	30 V
D2F-01L2-A1	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	HINGE ROLLER LEVER	A@VAC				30000 Cycle(s)			12.8 mm	6.5 inch	IP40		1.47 N	5.8 mm	.1A@30VDC	65 Cel			-25 Cel		MOMENTARY	.1 A	SOLDER		.55	30 V
D2F-01L3-A1	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	SIMULATED ROLLER LEVER	A@VAC				30000 Cycle(s)			12.8 mm	6.5 inch	IP40		1.47 N	5.8 mm	.1A@30VDC	65 Cel			-25 Cel		MOMENTARY	.1 A	SOLDER		.5	30 V
D2F-F-A1	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	PIN PLUNGER	1A@125VAC				30000 Cycle(s)			12.8 mm	6.5 inch	IP40		.74 N	5.8 mm	.5A@30VDC	65 Cel	1 A		-25 Cel		MOMENTARY	.5 A	SOLDER		.75	30 V		125 V	.5 mm
D2F-FL2-A1	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	HINGE ROLLER LEVER	1A@125VAC				30000 Cycle(s)			12.8 mm	6.5 inch	IP40		.74 N	5.8 mm	.5A@30VDC	65 Cel	1 A		-25 Cel		MOMENTARY	.5 A	SOLDER		.55	30 V		125 V
D2F-L2-A1	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	HINGE ROLLER LEVER	3A@125VAC				30000 Cycle(s)			12.8 mm	6.5 inch	IP40		1.47 N	5.8 mm	2A@30VDC	65 Cel	3 A		-25 Cel		MOMENTARY	2 A	SOLDER		.55	30 V		125 V
LCGHF5A10LC	C & K Components	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	LEVER ROLLER HIGH FORCE	1A@125VAC	GOLD	1000VRMS	COPPER ALLOY	6000 Cycle(s)	1000000000 ohm		19.84 mm	9.32 inch		SNAP ACTION	.56 N	6.1 mm	1A@30VDC	85 Cel	1 A	SILVER	-25 Cel		MOMENTARY	1 A	SOLDER		4.3	30 V		125 V	3.56 mm
LCGHF5A10RC	C & K Components	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	LEVER ROLLER HIGH FORCE	1A@125VAC	GOLD	1000VRMS	COPPER ALLOY	6000 Cycle(s)	1000000000 ohm		19.84 mm	9.32 inch		SNAP ACTION	.56 N	6.1 mm	1A@30VDC	85 Cel	1 A	SILVER	-25 Cel		MOMENTARY	1 A	SOLDER		4.3	30 V		125 V	3.56 mm
SS-01D1	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	PIN PLUNGER	.1A@125VAC				200000 Cycle(s)			19.8 mm	6.4 inch	IP40		1.47 N	10.2 mm	.1A@30VDC	85 Cel	.1 A		-25 Cel		MOMENTARY	.1 A	SOLDER	SS	1	30 V		125 V	.5 mm
SS-01GLD1	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	HINGE LEVER	.1A@125VAC				200000 Cycle(s)			19.8 mm	6.4 inch	IP40		.49 N	10.2 mm	.1A@30VDC	85 Cel	.1 A		-25 Cel		MOMENTARY	.1 A	SOLDER	SS	2	30 V		125 V	1.2 mm
SS-01GLD2	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	HINGE LEVER	.1A@125VAC				200000 Cycle(s)			19.8 mm	6.4 inch	IP40		.49 N	10.2 mm	.1A@30VDC	85 Cel	.1 A		-25 Cel		MOMENTARY	.1 A	SOLDER	SS	2	30 V		125 V	1.2 mm
SS-5-FD1	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	PIN PLUNGER	5A@125VAC				200000 Cycle(s)			19.8 mm	6.4 inch	IP40		.49 N	10.2 mm	5A@14VDC	85 Cel	5 A		-25 Cel		MOMENTARY	5 A	SOLDER	SS	1	14 V		125 V	.5 mm
SS-5-FD2	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	PIN PLUNGER	5A@125VAC				200000 Cycle(s)			19.8 mm	6.4 inch	IP40		.49 N	10.2 mm	5A@14VDC	85 Cel	5 A		-25 Cel		MOMENTARY	5 A	SOLDER	SS	1	14 V		125 V	.5 mm
SS-5D1	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	PIN PLUNGER	5A@125VAC				200000 Cycle(s)			19.8 mm	6.4 inch	IP40		1.47 N	10.2 mm	5A@14VDC	85 Cel	5 A		-25 Cel		MOMENTARY	5 A	SOLDER	SS	1	14 V		125 V	.5 mm
SS-5GL-FD1	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	HINGE LEVER	5A@125VAC				200000 Cycle(s)			19.8 mm	6.4 inch	IP40		.49 N	10.2 mm	5A@14VDC	85 Cel	5 A		-25 Cel		MOMENTARY	5 A	SOLDER	SS	2	14 V		125 V	1.2 mm
SS-5GL-FD2	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	HINGE LEVER	5A@125VAC				200000 Cycle(s)			19.8 mm	6.4 inch	IP40		.49 N	10.2 mm	5A@14VDC	85 Cel	5 A		-25 Cel		MOMENTARY	5 A	SOLDER	SS	2	14 V		125 V	1.2 mm
SS-5GL13-FD2	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	SIMULATED ROLLER LEVER	5A@125VAC				200000 Cycle(s)			19.8 mm	6.4 inch	IP40		.49 N	10.2 mm	5A@14VDC	85 Cel	5 A		-25 Cel		MOMENTARY	5 A	SOLDER	SS	2	14 V		125 V	1.2 mm
SS-5GL13D1	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	SIMULATED ROLLER LEVER	5A@125VAC				200000 Cycle(s)			19.8 mm	6.4 inch	IP40		.49 N	10.2 mm	5A@14VDC	85 Cel	5 A		-25 Cel		MOMENTARY	5 A	SOLDER	SS	2	14 V		125 V	1.2 mm
SS-5GL13D2	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	SIMULATED ROLLER LEVER	5A@125VAC				200000 Cycle(s)			19.8 mm	6.4 inch	IP40		.49 N	10.2 mm	5A@14VDC	85 Cel	5 A		-25 Cel		MOMENTARY	5 A	SOLDER	SS	2	14 V		125 V	1.2 mm
SS-5GL2-FD1	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	HINGE ROLLER LEVER	5A@125VAC				200000 Cycle(s)			19.8 mm	6.4 inch	IP40		.49 N	10.2 mm	5A@14VDC	85 Cel	5 A		-25 Cel		MOMENTARY	5 A	SOLDER	SS	2	14 V		125 V	1.2 mm
SS-5GL2-FD2	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	HINGE ROLLER LEVER	5A@125VAC				200000 Cycle(s)			19.8 mm	6.4 inch	IP40		.49 N	10.2 mm	5A@14VDC	85 Cel	5 A		-25 Cel		MOMENTARY	5 A	SOLDER	SS	2	14 V		125 V	1.2 mm
SS-5GL2D2	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	HINGE ROLLER LEVER	5A@125VAC				200000 Cycle(s)			19.8 mm	6.4 inch	IP40		.49 N	10.2 mm	5A@14VDC	85 Cel	5 A		-25 Cel		MOMENTARY	5 A	SOLDER	SS	2	14 V		125 V	1.2 mm
SS-5GLD1	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	HINGE LEVER	5A@125VAC				200000 Cycle(s)			19.8 mm	6.4 inch	IP40		.49 N	10.2 mm	5A@14VDC	85 Cel	5 A		-25 Cel		MOMENTARY	5 A	SOLDER	SS	2	14 V		125 V	1.2 mm
D2HW-BL201H	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	PIN PLUNGER					100000 Cycle(s)			13.3 mm	6.5 inch	IP50		.75 N	5.3 mm	2A@12VDC	85 Cel			-40 Cel		MOMENTARY	2 A	SOLDER		1.4	12 V

Snap Action & Limit Switches

Snap action switches and limit switches are electronic switches that are commonly used in industrial control systems and other applications that require precise and reliable control of mechanical processes.

Snap action switches, also known as micro switches, are electrical switches that use a spring-loaded lever to activate the switch when a certain force or pressure is applied. They are commonly used in applications where a small and precise switch is needed, such as in appliances, vending machines, and automotive control systems.

Limit switches, on the other hand, are electrical switches that are activated when a moving object, such as a conveyor belt or door, reaches a specific position or limit. They are commonly used in industrial control systems to monitor the position of mechanical components and to prevent damage or accidents caused by overrunning or overshooting.

Both snap action switches and limit switches come in a variety of configurations, including normally open or normally closed switches, and can be wired to operate in a variety of ways, such as momentary or latching operation.