ON-(ON) Toggle Switches 5

Reset All

Part	Manufacturer	Switch Type	Mounting Feature	Switch Function	Type (Actuator)	Contact Function	Solderability	AC Maximum Rating R Load (Contact)	Center Contact Plating	Housing Material	Angle (Actuator)	Dielectric Withstand Volts (V)	Terminal Material	Electrical Life	DC Maximum Power Rating R Load (Contact)	Insulation Resistance	Body Length/Diameter	Body Width	Length (Bushing)	Sealing	Contact Timing	Insulator Material	End Contact Plating	Body Height	DC Maximum Rating R Load (Contact)	Finish (Actuator)	Maximum Operating Temperature	Maximum AC Contact Current	Center Contact Material	Minimum Operating Temperature	Length (Actuator)	Terminal Finish	Switch Action	Maximum DC Contact Current	Termination Type	Contact Resistance	Diameter (Bushing)	End Contact Material	PCB Hole Count	Maximum DC Contact Voltage	Maximum AC Contact Voltage	JESD-609 Code	Type (Bushing)	Terminal Length	Material (Actuator)
B15AV	Nkk Switches	TOGGLE SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	TOGGLE BAT	ON-(ON)			GOLD		26 deg	500VAC	COPPER ALLOY	50000 Cycle(s)	0.4VA@28VDC	500000000 ohm	8.7884 mm	8.001 inch	.106 inch	EPOXY	BREAK-BEFORE-MAKE	GLASS FILLED POLYAMIDE	GOLD	16.256 mm		NICKEL	85 Cel		PHOSPHOR BRONZE	-30 Cel	.394 inch	GOLD	MOMENTARY		SOLDER	50 mohm	.236 inch	COPPER ALLOY	5			e4	UNTHREADED	.122 inch	BRASS
B25AH	Nkk Switches	TOGGLE SWITCH	THROUGH HOLE-RIGHT ANGLE	DPDT	TOGGLE BAT	ON-(ON)			GOLD		26 deg	500VAC	COPPER ALLOY	50000 Cycle(s)	0.4VA@28VDC	500000000 ohm	8.7884 mm	8.7884 inch	.106 inch	EPOXY	BREAK-BEFORE-MAKE	GLASS FILLED POLYAMIDE	GOLD	13.716 mm		NICKEL	85 Cel		PHOSPHOR BRONZE	-30 Cel	.394 inch	GOLD	MOMENTARY		SOLDER	50 mohm	.236 inch	COPPER ALLOY	8			e4	UNTHREADED	.122 inch	BRASS
B25AV	Nkk Switches	TOGGLE SWITCH	THROUGH HOLE-RIGHT ANGLE	DPDT	TOGGLE BAT	ON-(ON)			GOLD		26 deg	500VAC	COPPER ALLOY	50000 Cycle(s)	0.4VA@28VDC	500000000 ohm	8.7884 mm	8.7884 inch	.106 inch	EPOXY	BREAK-BEFORE-MAKE	GLASS FILLED POLYAMIDE	GOLD	16.256 mm		NICKEL	85 Cel		PHOSPHOR BRONZE	-30 Cel	.394 inch	GOLD	MOMENTARY		SOLDER	50 mohm	.236 inch	COPPER ALLOY	8			e4	UNTHREADED	.122 inch	BRASS
M2015SS1W01	Nkk Switches	TOGGLE SWITCH	PANEL MOUNT	SPDT	TOGGLE BAT	ON-(ON)	WAVE	3A@250VAC	SILVER	STAINLESS STEEL	25 deg	1500VAC	COPPER ALLOY	25000 Cycle(s)		1000000000 ohm	13.0048 mm	7.8994 inch	.35 inch	EPOXY		DIALLYL PHTHALATE	SILVER	32.7914 mm		CHROME	85 Cel	3 A	SILVER	-15 Cel	.413 inch	GOLD OVER NICKEL/SILVER	HORIZONTAL		SOLDER LUG	10 mohm	.25 inch	SILVER			250 V	e4	1/4-40	.157 inch	BRASS
34ASP23B1M1QT	Grayhill	TOGGLE SWITCH	PANEL MOUNT	SPDT	TOGGLE	ON-(ON)		2A@250VAC	SILVER	STAINLESS STEEL		1400VAC		40000 Cycle(s)		1000000000 ohm	16.51 mm	12.7 inch	.35 inch	EPOXY		DIALLYL PHTHALATE	SILVER	10.541 mm	5A@28VDC	CHROME	85 Cel	2 A	COPPER ALLOY	-30 Cel	.55 inch		MOMENTARY	5 A	SOLDER LUG	10 mohm		COPPER ALLOY		28 V	250 V		1/4-40	.156 inch	BRASS

Toggle Switches

Toggle switches are electronic switches that are activated by flipping a lever up or down. They are commonly used in a variety of applications, such as industrial control systems, automotive electronics, and home appliances.

Toggle switches typically consist of a housing, a lever, and a set of electrical contacts. When the lever is flipped in one direction, it completes a circuit between the contacts, allowing electrical current to flow through the switch. When the lever is flipped in the opposite direction, the circuit is broken and the current stops flowing.

Toggle switches come in different configurations, including single-pole, double-pole, and multi-pole switches. They also come in different contact arrangements, such as make-before-break, break-before-make, and center-off switches.

Toggle switches offer several advantages over other types of switches. They provide a simple and intuitive means of controlling circuits, and they offer tactile feedback that can help to ensure reliable operation. They are also highly durable and can withstand frequent use and harsh environments.

However, toggle switches also have some limitations, such as the need for physical contact to activate the switch and susceptibility to damage from external factors such as dust and debris.