600 OHMS Telecom Transformers 9

Reset All

Part	Manufacturer	Transformer Type	Mounting Feature	Approvals (V)	Impedance (Primary)	Impedance (Secondary)	Packing Method	Maximum DC Unbalance Current	Dimensions	Maximum Operating Temperature	Minimum Operating Temperature	Height	Width	Additional Features	Minimum Operating Frequency	Length	Maximum Operating Frequency
T6003NLT	Pulse Electronics	TELECOM TRANSFORMER	SURFACE MOUNT		600 OHMS	600 OHMS	TRAY		L13.46XB17.65XH12.32 (mm)			12.32 mm	17.65 mm	TURNS RATIO: 1:1		13.46 mm
MET-59	Tamura	TELECOM TRANSFORMER	THROUGH HOLE MOUNTED		600 OHMS	600 OHMS CT		3 mA	L10.4XB7.87XH11.8 (mm)			11.8 mm	7.87 mm		.3 KHz	10.4 mm	100 KHz
TTC-02	Tamura	TELECOM TRANSFORMER	THROUGH HOLE MOUNTED	CSA, UL	600 OHMS							12.4 mm	16.5 mm		.3 KHz	20.3 mm	3.5 KHz
TTC-105-1	Tamura	TELECOM TRANSFORMER	THROUGH HOLE MOUNTED	CSA, UL	600 OHMS							19 mm	16 mm	TURNS RATIO: 1:1	.66 KHz	20.7 mm	3.5 KHz
TTC-5020	Tamura	TELECOM TRANSFORMER	THROUGH HOLE MOUNTED	CSA, UL	600 OHMS							13.8 mm	22.5 mm	TURNS RATIO: 1:1	.6 KHz	23.1 mm	3.5 KHz
LM-LP-1004L	Bourns	TELECOM TRANSFORMER	THROUGH HOLE MOUNTED	UL	600 OHMS	600 OHMS			L17.7XB17.7XH12.6 (mm)	60 Cel	-10 Cel	12.6 mm	17.7 mm	TURNS RATIO: 1:1	.2 KHz	17.7 mm	3.5 KHz
TTC-5024	Tamura	TELECOM TRANSFORMER	SURFACE MOUNT	EN, UL	600 OHMS					85 Cel	-20 Cel	5.08 mm	8.5 mm	TURNS RATIO: 1:1	.2 KHz	16.3 mm	4 KHz
TTC-5035	Tamura	TELECOM TRANSFORMER	SURFACE MOUNT	EN, UL	600 OHMS	346 OHMS				85 Cel	-20 Cel	7.6 mm	9.6 mm	TURNS RATIO: 1:1	.2 KHz	12.5 mm	4 KHz
TTC-5036	Tamura	TELECOM TRANSFORMER	SURFACE MOUNT	EN, UL	600 OHMS	287 OHMS				85 Cel	-20 Cel	7.6 mm	9.6 mm	TURNS RATIO: 1:1	.2 KHz	12.5 mm	4 KHz

Telecom Transformers

Telecom transformers are a type of transformer used in telecommunications equipment to isolate and match impedance between different parts of a circuit. They are commonly used in applications such as modems, routers, switches, and telephone systems.

The primary function of a telecom transformer is to isolate the AC signal from the equipment to prevent noise and interference from other components in the circuit. Telecom transformers are also used to match impedance between the input and output stages of the circuit to ensure maximum power transfer and signal integrity.

Telecom transformers are typically designed to operate at low frequencies, ranging from a few Hz to several kHz, depending on the specific application. They are designed to handle low power levels and have low losses. The design of a telecom transformer is usually optimized for a specific frequency range and bandwidth.

Telecom transformers are typically constructed with a magnetic core made of ferrite or powdered iron, and one or more coils wound around the core. The coils are usually made of copper wire with a thin insulating layer. The number of turns and the size of the wire are determined by the required impedance transformation and the frequency range of the circuit.