AP7341-135FS4-7 by Diodes Incorporated | Regulators

Image shown is a representation only.

Manufacturer	Diodes Incorporated
Manufacturer's Part Number	AP7341-135FS4-7
Description	FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 4; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Input Voltage Absolute: 6 V; Maximum Voltage Tolerance: 1.5 %;
Datasheet	AP7341-135FS4-7 Datasheet

NAME	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Maximum Line Regulation:	.004615 %
Maximum Time At Peak Reflow Temperature (s):	30
Maximum Seated Height:	.4 mm
Surface Mount:	YES
Regulator Type:	FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR
Terminal Finish:	MATTE TIN
No. of Outputs:	1
Maximum Output Current-1:	.3 A
No. of Terminals:	4
Terminal Position:	DUAL
Package Style (Meter):	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
Technology:	CMOS
Maximum Load Regulation:	.03 %
JESD-30 Code:	S-PDSO-N4
Package Shape:	SQUARE
Terminal Form:	NO LEAD
Nominal Output Voltage-1:	1.3 V
Maximum Operating Temperature:	85 Cel
Package Code:	HVSON
Width:	1 mm
Maximum Dropout Voltage-1:	.62 V
Maximum Input Voltage Absolute:	6 V
Minimum Input Voltage:	1.7 V
Maximum Output Voltage-1:	1.3195 V
Maximum Input Voltage:	5.25 V
Packing Method:	TR
Minimum Output Voltage-1:	1.2805 V
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
Maximum Voltage Tolerance:	1.5 %
No. of Functions:	1
Package Equivalence Code:	SOLCC4,.04,25
Nominal Dropout Voltage-1:	.5 V
Length:	1 mm
Adjustability:	FIXED
Peak Reflow Temperature (C):	260
Terminal Pitch:	.65 mm

Popular Products

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.

The Onsemi NC7WZ17P6X is a logic gate with 2 functions, featuring a propagation delay of 13.1 ns at 1.8V supply voltage. Ideal for industrial applications, it operates b/w -40 to 85°C and has a max power supply current of 100mA. With Schmitt Trigger technology and small outline packaging, it suits compact electronic designs requiring fast signal processing.

TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.

USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;

SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.