Fair-rite Products - 2773003111

Murata Manufacturing's BLM18BB331SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers an output impedance of 330Ω and max DC resistance of 0.58Ω. Ideal for surface mount applications, this ferrite chip filter has a rated current of 0.4A and is commonly used in electronic devices for noise suppression at frequencies up to 100MHz.

RB8532-16-1M3 by Schaffner Holding Ag is a Data Line Filter with 3 functions, rated voltage of 1000V, and inductance of 1300uH. It operates b/w -40 to 125 °C and has a max DC resistance of 0.0057 ohm. Ideal for applications requiring noise suppression in data lines.

BK1005HM121-T by Taiyo Yuden is a chip bead data line filter with 2 terminals, 0402 case code, and ferrite chip construction. It operates b/w -55 to 125 °C, has a DC resistance of 0.18 ohm, and output impedance of 120 OHM. Ideal for applications requiring noise suppression in circuits up to 100 MHz frequency range.

FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .35 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .3 A;

The Bourns 7116 is a data line filter with two functions. It has a maximum operating temperature of 105°C and a minimum operating temperature of -55°C. The inductance is 8000 uH and the maximum DC resistance is 0.2 ohm. It is a through-hole mount and rated for a current of 2 A.

TDK's MPZ1608R391ATA00 is a 0603 chip bead filter with 2 terminals. It offers a max operating temperature of 125°C and min frequency of 100 MHz. Ideal for data line filtering applications, it has an output impedance of 390 ohms and can handle a rated current of 1.2A.

Murata Manufacturing's BLM18KG300TN1D is a 0603 chip bead filter with 2 terminals. It offers a max operating temperature of 125°C and min frequency of 100 MHz. Ideal for data line filtering applications, it has a DC resistance of 0.01 ohm and output impedance of 30 ohm.

FERRITE CHIP; Maximum DC Resistance: .1 ohm; Rated Current: 2 A; Mounting Type: SURFACE MOUNT; Output Impedance (ohm): 60 OHM; Terminal Finish: Nickel (Ni);

FLTR75V05Z by Abb is a 2-function data line filter module with UL, CAN, CSA, VDE, EN approvals. It operates at 75V and 5A with max DC resistance of 0.02 ohm. Ideal for applications requiring filtering in data lines due to its compact dimensions and wide temperature range (-40°C to 100°C).

Murata Manufacturing's BLM15AX102SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1x0.5x0.5mm, it offers a DC resistance of 0.49 ohm and output impedance of 1000 ohm at frequencies up to 100 MHz. Ideal for surface mount applications in electronic devices requiring noise suppression on data lines.

Laird Technologies' MI0603J601R-10 is a chip bead data line filter with 2 terminals, operating from -40 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a DC resistance of 0.2 ohm and an output impedance of 600 ohm for frequencies ranging from 25MHz to 1000MHz. Ideal for surface mount applications, this ferrite chip filter has a rated current of 1A and is commonly used in electronic devices requiring noise suppression on data lines.

DLW21SN900HQ2L by Murata Mfg. is a Data Line Filter with 2 functions, rated at 20V and 0.28A. It offers high insulation resistance of 10 Mohm, ideal for applications requiring noise suppression in data lines within a temperature range of -40 to 85°C.

Wurth Elektronik 74270057 is a FERRITE BEAD Data Line Filter with 808 OHM Output Impedance. Operating temperature ranges from -25 to 125 °C, with a diameter of 19mm and dimensions D19.0XH50.8 (mm). Ideal for applications requiring noise suppression in data lines or signal filtering in electronic circuits.

Wurth Elektronik 744212331 is a UL-approved data line filter with 2 functions, rated at 80V. With inductance of 330uH and max DC resistance of 0.3 ohm, it operates b/w -40 to 105 °C. Ideal for surface mount applications, dimensions are L6.5xB3.6xH1.65 mm, suitable for filtering data lines with an output impedance of 2000 OHM.

Murata Manufacturing's BLM18AG102SN1B is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a max frequency of 100MHz and DC resistance of 0.5 ohm. Ideal for surface mount applications, this ferrite chip filter has an output impedance of 1000 ohm and rated current of 0.4A.

Semtech's ECLAMP2422N.TCT is a 5V data line filter with 2 functions and 6 terminals. It operates b/w -40°C to 85°C, offering 0.003uH inductance and 100uF capacitance. Ideal for IEC-approved applications requiring surface mount filters with dimensions of L1.45xB1.0xH0.58mm.

Murata Manufacturing's NFM18PC225B1A3D is a FEED THROUGH CAPACITOR with 200 Mohm Min Insulation Resistance, 10 V Rated Voltage, and 2200000 uF Capacitance. It operates b/w -40 to 85 °C and is ideal for data line filtering applications due to its compact size (L1.6XB0.8XH0.8 mm) and high rated current of 4 A.

Murata Manufacturing's NFM18CC223R1C3D is a data line filter with 1 function, rated for 16V and 1A. Featuring FEED THROUGH CAPACITOR type, it offers high insulation resistance of 1000 Mohm. Ideal for applications requiring filtering in compact spaces with temperatures ranging from -55 to 125°C.

Taiyo Yuden's FBMH3216HM221NTV is a Ferrite Chip Data Line Filter with 2 terminals, rated for 4A current. It offers an output impedance of 220 ohm and operates b/w -40°C to 125°C. Ideal for surface mount applications requiring effective noise filtering in compact spaces.

TDK MMZ1608S400ATA00 is a 0603 chip bead filter with 2 terminals. It offers max operating temp of 125°C, min of -55°C, and DC resistance of 0.1 ohm. Ideal for data line filtering applications due to its compact size (L1.6xB0.8xH0.8 mm) and output impedance of 40 ohm at rated current of 0.6 A.