Laird Technologies - CMX1616Z171B-10

USBUF02W6 by STMicroelectronics is a DATA LINE FILTER with 6 terminals, UL approved, and MIL-STD-883E screened. It has a max operating temperature of 125°C and min of -40°C. With a capacitance of 100uF, it is ideal for data line filtering applications in various electronic devices.

Murata Manufacturing's NFE31PT222Z1E9B is a 3-terminal data line filter with 1000 Mohm insulation resistance and 25V rated voltage. With dimensions of L3.2XB1.6XH1.6 (mm), it operates b/w -40 to 85 °C, making it ideal for applications requiring up to 6A rated current and 2200uF capacitance in surface mount configurations.

DATA LINE FILTER; Maximum DC Resistance: .3 ohm; Rated Current: .7 A; No. of Terminals: 4; Mounting Type: SURFACE MOUNT; Width (mm): 5.9;

MI0603J680R-10 by Laird Technologies is a chip bead data line filter with 2 terminals, FERRITE CHIP type, and 68 OHM output impedance. It operates b/w -40 to 125 °C, has a DC resistance of 0.1 ohm, and supports frequencies from 25 MHz to 1000 MHz. Ideal for surface mount applications in electronics requiring noise suppression and signal filtering.

BLM18PG471SH1D by Murata is a chip bead data line filter with AEC-Q200 screening. It has 2 terminals, measures 1.6x0.8x0.8mm, and offers an output impedance of 470 ohm at a rated current of 1A. Ideal for surface mount applications, it operates b/w -55 to 125°C and is designed for frequencies ranging from 100 MHz with max DC resistance of 0.2 ohm.

Laird Technologies' HZ1206E601R-10 is a chip bead data line filter with 2 terminals, operating b/w -40 to 125 °C. With dimensions of L3.2XB1.6XH1.1 (mm), it offers an output impedance of 600 OHM and a max frequency of 1000 MHz. Ideal for surface mount applications, this ferrite chip filter has a DC resistance of 0.3 ohm and rated current of 0.5 A.

Wurth Elektronik 742792622 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It operates b/w -55 to 125 °C, has a DC resistance of 0.3 ohm, and an output impedance of 180 OHM. Dimensions are L1.6xB0.8xH0.8 mm, rated for 1.5 A current with surface mounting type.

FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .035 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 3 A;

Murata's BLM18HE601SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a DC resistance of 0.25 ohm and an output impedance of 600 ohm for frequencies ranging from 100 MHz to 1000 MHz. Ideal for surface mount applications in electronic devices requiring noise suppression on data lines.

Murata's BLM18BD252SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a max DC resistance of 1.5 ohm and output impedance of 2500 ohm at frequencies ranging from 100 MHz. Ideal for surface mount applications in electronic devices requiring noise suppression on data lines.

FEED THROUGH CAPACITOR; Rated Current: 10 A; Manufacturer Series: 2463-002; Diameter (mm): 2.51; Dimensions: D2.51XL3.94 (mm)/D0.099XL0.155 (inch); Mounting Type: THROUGH HOLE MOUNT;

The KEMET Corporation D-08C2A is a data line filter with 4 functions, rated at 50V and 0.5A. It offers a min insulation resistance of 10 Mohm and operates b/w -25 to 65°C. With dimensions of L21.0xB16.0xH14.0 mm, it is ideal for applications requiring noise filtering in electronic circuits.

Murata Manufacturing's DLW21HN181SQ2L is a data line filter with 2 functions, rated at 50V and 0.25A. It offers a max DC resistance of 0.5 ohm and an output impedance of 180 ohm, suitable for applications requiring noise suppression in data lines. With dimensions of L2.0xB1.2xH0.9 (mm), it is designed for surface mount installation in electronic devices operating b/w -40°C to 85°C.

The TDK MMZ2012R102A is a chip bead data line filter with FERRITE CHIP technology. It has a max operating temperature of 125°C and min of -55°C, with dimensions of L2.0xB1.25xH0.85 (mm). Ideal for applications requiring a rated current of 0.5A and output impedance of 1000Ω in surface mount configurations.

TDK's MMZ1608Y601BTA00 is a 0603 chip bead data line filter with 2 terminals. Featuring ferrite chip construction, it has a max operating temp of 125°C and min of -55°C. With dimensions of L1.6xB0.8xH0.8 mm, it offers an output impedance of 600 ohm and rated current of 0.5 A, ideal for surface mount applications in electronics.

NFE31PT221D1E9L by Murata Manufacturing is a data line filter with a rated voltage of 25V and a capacitance of 220uF. It has a min insulation resistance of 1000 Mohm and is suitable for surface mount applications.

Murata Manufacturing's BLM15BB121SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. With dimensions of L1.0XB0.5XH0.5 (mm), it offers a max frequency of 100 MHz and output impedance of 120 OHM. Ideal for surface mount applications, this ferrite chip filter has a rated current of 0.3 A and DC resistance of 0.55 ohm, making it suitable for noise suppression in electronic circuits.

Taiyo Yuden's FBMH3225HM601NT is a chip bead data line filter with 2 terminals. It operates b/w -40 to 85°C, offering 600 OHM impedance at 100 MHz. Ideal for surface mount applications, it measures L3.2xB2.5xH2.5 mm and has a max DC resistance of 0.042 ohm.

Murata Manufacturing's BLM18AG601SH1D is an AEC-Q200 compliant chip bead filter with 2 terminals, ideal for data line applications. With a max operating temperature of 125°C and DC resistance of 0.38 ohm, it offers effective filtering at frequencies ranging from 100 MHz. This surface mount ferrite chip measures L1.6xB0.8xH0.8 (mm) and is suitable for use in automotive electronics due to its high output impedance of 600 OHM.

FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .08 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 1.5 A;