Comparator Comparators 862

Reset All
Part RoHS Manufacturer Amplifier Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material Nominal Unity Gain Bandwidth Maximum Negative Supply Voltage Limit Maximum Input Offset Voltage Maximum Average Bias Current (IIB) Surface Mount No. of Functions Minimum Common Mode Reject Ratio Technology Screening Level Nominal Common Mode Reject Ratio Maximum Supply Current Nominal Negative Supply Voltage (Vsup) Minimum Isolation Voltage Packing Method Nominal Supply Voltage / Vsup (V) Power Supplies (V) Package Style (Meter) Package Equivalence Code Sub-Category Nominal Slow Rate Maximum Supply Voltage Limit Terminal Pitch Maximum Operating Temperature Maximum Bias Current (IIB) @25C Maximum Common Mode Voltage Nominal Response Time Output Type Minimum Operating Temperature Terminal Finish Terminal Position JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Nominal Bandwidth (3dB) JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length

TLV3702IDGKG4

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

0 V

7 mV

1.5 nA

Yes

2

CMOS

1.6 μA

0 V

Tube

5 V

±1.35/±8/2.7/16 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

17 V

0.026 in (0.65 mm)

125 °C (257 °F)

100 pA

240 µs

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

260 °C (500 °F)

0.118 in (3 mm)

TLV3704IPWRG4

Texas Instruments

Comparator

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

0 V

7 mV

1.5 nA

Yes

4

CMOS

3.2 μA

0 V

Tape And Reel

5 V

±1.35/±8/2.7/16 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

17 V

0.026 in (0.65 mm)

125 °C (257 °F)

100 pA

240 µs

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G14

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

260 °C (500 °F)

0.197 in (5 mm)

TLV3501AIDBVRG4

Texas Instruments

Comparator

Automotive

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

6.5 mV

10 pA

Yes

1

5 mA

Tape And Reel

5 V

3/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP6,.11,37

Comparators

5.5 V

0.037 in (0.95 mm)

125 °C (257 °F)

10 pA

7.5 ns

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G6

2

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

TLV3501AIDBVTG4

Texas Instruments

Comparator

Automotive

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

6.5 mV

10 pA

Yes

1

5 mA

Tape And Reel

5 V

3/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP6,.11,37

Comparators

5.5 V

0.037 in (0.95 mm)

125 °C (257 °F)

10 pA

7.5 ns

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G6

2

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

TLV3502AIDG4

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

6.5 mV

10 pA

Yes

2

10 mA

Tube

5 V

3/5 V

Small Outline

SOP8,.25

Comparators

5.5 V

0.05 in (1.27 mm)

125 °C (257 °F)

10 pA

7.5 ns

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

2

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

TLV3502AID

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

6.5 mV

10 pA

Yes

2

10 mA

Tube

5 V

3/5 V

Small Outline

SOP8,.25

Comparators

5.5 V

0.05 in (1.27 mm)

125 °C (257 °F)

10 pA

7.5 ns

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

2

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LM239DG4

Texas Instruments

Comparator

Other

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

5 mV

400 nA

Yes

4

BIPOLAR

2 mA

Tube

5 V

5 V

Small Outline

SOP14,.24

Comparators

36 V

0.05 in (1.27 mm)

85 °C (185 °F)

250 nA

1.3 µs

Open-Collector

-25 °C (-13 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.341 in (8.65 mm)

LM2903DGKRG4

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

15 mV

-500 nA

Yes

2

BIPOLAR

1 mA

Tape And Reel

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

36 V

0.026 in (0.65 mm)

125 °C (257 °F)

50 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold/Silver

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

260 °C (500 °F)

0.118 in (3 mm)

TLV1391CDBVRE4

Texas Instruments

Comparator

Commercial

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

9 mV

-400 nA

Yes

1

BIPOLAR

150 μA

3 V

3/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

7 V

0.037 in (0.95 mm)

70 °C (158 °F)

250 nA

700 ns

Open-Collector

0 °C (32 °F)

Nickel Palladium Gold

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

TLV1391CDBVTE4

Texas Instruments

Comparator

Commercial

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

9 mV

-400 nA

Yes

1

BIPOLAR

150 μA

3 V

3/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

7 V

0.037 in (0.95 mm)

70 °C (158 °F)

250 nA

700 ns

Open-Collector

0 °C (32 °F)

Nickel Palladium Gold

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

TLV3404IDG4

Texas Instruments

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

0 V

4.4 mV

1.5 nA

Yes

4

2.56 μA

0 V

Tube

5 V

±1.35/±8/2.7/16 V

Small Outline

SOP14,.25

Comparators

17 V

0.05 in (1.27 mm)

125 °C (257 °F)

100 pA

175 µs

Open-Drain

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.341 in (8.65 mm)

TS339IYDT

STMicroelectronics

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

0 V

6.5 mV

600 pA

Yes

4

CMOS

25 μA

0 V

3 V

3/5 V

Small Outline

SOP14,.25

Comparators

18 V

0.05 in (1.27 mm)

125 °C (257 °F)

600 pA

1.5 µs

Open-Drain

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

0.341 in (8.65 mm)

LM293DGKRG4

Texas Instruments

Comparator

Other

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

9 mV

-400 nA

Yes

2

BIPOLAR

1 mA

Tape And Reel

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

36 V

0.026 in (0.65 mm)

85 °C (185 °F)

50 nA

1.3 µs

Open-Collector

-25 °C (-13 °F)

Nickel/Palladium/Gold/Silver

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

260 °C (500 °F)

0.118 in (3 mm)

TLV3494AIDRG4

Texas Instruments

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

15 mV

10 pA

Yes

4

CMOS

1.2 μA

5 V

2/5 V

Small Outline

SOP14,.25

Comparators

5.5 V

0.05 in (1.27 mm)

125 °C (257 °F)

10 pA

12 µs

Push-Pull

-40 °C (-40 °F)

Dual

R-PDSO-G14

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

0.341 in (8.65 mm)

TLV3502AIDCNRG4

Texas Instruments

Comparator

Automotive

Gull Wing

8

LSSOP

Rectangular

Plastic/Epoxy

6.5 mV

10 pA

Yes

2

10 mA

Tape And Reel

5 V

3/5 V

Small Outline, Low Profile, Shrink Pitch

TSSOP8,.1

Comparators

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

10 pA

7.5 ns

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

2

0.057 in (1.45 mm)

0.064 in (1.625 mm)

No

e4

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

TLV3702CDGKRG4

Texas Instruments

Comparator

Commercial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

0 V

7 mV

1.5 nA

Yes

2

CMOS

1.6 μA

0 V

Tape And Reel

2.7 V

±1.25/±8/2.5/16 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

17 V

0.026 in (0.65 mm)

70 °C (158 °F)

100 pA

240 µs

Push-Pull

0 °C (32 °F)

Nickel Palladium Gold

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

TL331IDBVTE4

Texas Instruments

Comparator

Industrial

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

9 mV

-400 nA

Yes

1

BIPOLAR

700 μA

5 V

5/30 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

36 V

0.037 in (0.95 mm)

85 °C (185 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

ADCMP551BRQZ

Analog Devices

Comparator

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

10 mV

10 uA

Yes

1

BIPOLAR

17 mA

3.3 V

3.3 V

Small Outline, Shrink Pitch

SSOP16,.25

Comparators

6 V

0.025 in (0.635 mm)

85 °C (185 °F)

5 uA

Open-Emitter

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G16

1

0.069 in (1.7526 mm)

0.154 in (3.9116 mm)

No

e3

260 °C (500 °F)

0.193 in (4.9022 mm)

ADCMP552BRQZ

Analog Devices

Comparator

Industrial

Gull Wing

20

SSOP

Rectangular

Plastic/Epoxy

10 mV

10 uA

Yes

1

BIPOLAR

17 mA

3.3 V

3.3 V

Small Outline, Shrink Pitch

SSOP20,.25

Comparators

6 V

0.025 in (0.635 mm)

85 °C (185 °F)

5 uA

Open-Emitter

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G20

1

0.069 in (1.7526 mm)

0.154 in (3.9116 mm)

No

e3

260 °C (500 °F)

0.341 in (8.6614 mm)

ADCMP572BCPZ-WP

Analog Devices

Comparator

Industrial

No Lead

16

HVQCCN

Square

5 mV

Yes

1

BIPOLAR

52 mA

3.3 V

3.3/5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC16,.12SQ,20

Comparators

6 V

0.02 in (0.5 mm)

85 °C (185 °F)

50 uA

0.165 ns

-40 °C (-40 °F)

Matte Tin

Quad

S-XQCC-N16

3

0.039 in (1 mm)

0.118 in (3 mm)

No

e3

260 °C (500 °F)

0.118 in (3 mm)

ADCMP573BCPZ-WP

Analog Devices

Comparator

Industrial

No Lead

16

HVQCCN

Square

5 mV

Yes

1

BIPOLAR

80 mA

3.3 V

3.3/5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC16,.12SQ,20

Comparators

6 V

0.02 in (0.5 mm)

85 °C (185 °F)

50 uA

0.165 ns

-40 °C (-40 °F)

Matte Tin

Quad

S-XQCC-N16

3

0.039 in (1 mm)

0.118 in (3 mm)

No

e3

260 °C (500 °F)

0.118 in (3 mm)

ADCMP580BCPZ-WP

Analog Devices

Comparator

Automotive

No Lead

16

HVQCCN

Square

-6 V

10 mV

30 uA

Yes

1

BIPOLAR

-5 V

5 V

±5,3.3 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC16,.12SQ,20

Comparators

6 V

0.02 in (0.5 mm)

125 °C (257 °F)

30 uA

0.18 ns

-40 °C (-40 °F)

Matte Tin

Quad

S-XQCC-N16

3

0.035 in (0.9 mm)

0.118 in (3 mm)

No

e3

260 °C (500 °F)

0.118 in (3 mm)

ADCMP581BCPZ-WP

Analog Devices

Comparator

Automotive

No Lead

16

HVQCCN

Square

-6 V

10 mV

30 uA

Yes

1

BIPOLAR

-5 V

5 V

±5,3.3 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC16,.12SQ,20

Comparators

6 V

0.02 in (0.5 mm)

125 °C (257 °F)

30 uA

0.18 ns

-40 °C (-40 °F)

Matte Tin

Quad

S-XQCC-N16

3

0.035 in (0.9 mm)

0.118 in (3 mm)

No

e3

260 °C (500 °F)

0.118 in (3 mm)

ADCMP582BCPZ-WP

Analog Devices

Comparator

Automotive

No Lead

16

HVQCCN

Square

-6 V

10 mV

30 uA

Yes

1

BIPOLAR

-5 V

5 V

±5,3.3 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC16,.12SQ,20

Comparators

6 V

0.02 in (0.5 mm)

125 °C (257 °F)

30 uA

0.18 ns

-40 °C (-40 °F)

Matte Tin

Quad

S-XQCC-N16

3

0.035 in (0.9 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

ADCMP565BPZ

Analog Devices

Comparator

Industrial

J Bend

20

QCCJ

Square

Plastic/Epoxy

-6 V

6 mV

40 uA

Yes

2

-5.2 V

5 V

Chip Carrier

Comparators

6 V

0.05 in (1.27 mm)

85 °C (185 °F)

0.375 ns

Open-Emitter

-40 °C (-40 °F)

Matte Tin - annealed

Quad

S-PQCC-J20

1

0.18 in (4.57 mm)

0.353 in (8.965 mm)

No

e3

260 °C (500 °F)

0.353 in (8.965 mm)

TLC372CPWRG4

Texas Instruments

Comparator

Commercial

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

6.5 mV

600 pA

Yes

2

CMOS

300 μA

Tape And Reel

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.25

Comparators

18 V

0.026 in (0.65 mm)

70 °C (158 °F)

30 pA

650 ns

Open-Drain

0 °C (32 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.047 in (1.2 mm)

0.118 in (3 mm)

No

e4

260 °C (500 °F)

0.173 in (4.4 mm)

TLV3012AIDBVTG4

Texas Instruments

Comparator

Industrial

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

15 mV

Yes

1

5 μA

Tape And Reel

5 V

2/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP6,.11,37

Comparators

7 V

0.037 in (0.95 mm)

125 °C (257 °F)

12 µs

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G6

2

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

260 °C (500 °F)

0.114 in (2.9 mm)

TLV3502AIDCNTG4

Texas Instruments

Comparator

Automotive

Gull Wing

8

LSSOP

Rectangular

Plastic/Epoxy

6.5 mV

10 pA

Yes

2

10 mA

Tape And Reel

5 V

3/5 V

Small Outline, Low Profile, Shrink Pitch

TSSOP8,.1

Comparators

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

10 pA

7.5 ns

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

2

0.057 in (1.45 mm)

0.064 in (1.625 mm)

No

e4

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

NCS2202SQ2T2G

Onsemi

Comparator

Industrial

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

0 V

8 mV

Yes

1

CMOS

17 μA

0 V

Tape And Reel

3 V

1/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

6 V

0.026 in (0.65 mm)

105 °C (221 °F)

1.1 µs

Open-Drain

-40 °C (-40 °F)

Matte Tin - annealed

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e3

40

260 °C (500 °F)

0.079 in (2 mm)

TLV3402IDRG4

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

4.4 mV

1.5 nA

Yes

2

1.28 μA

0 V

Tape And Reel

5 V

±1.35/±8/2.7/16 V

Small Outline

SOP8,.25

Comparators

17 V

0.05 in (1.27 mm)

125 °C (257 °F)

100 pA

175 µs

Open-Drain

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.193 in (4.9 mm)

TLV3704IDG4

Texas Instruments

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

0 V

7 mV

1.5 nA

Yes

4

CMOS

3.2 μA

0 V

Tube

5 V

±1.35/±8/2.7/16 V

Small Outline

SOP14,.25

Comparators

17 V

0.05 in (1.27 mm)

125 °C (257 °F)

100 pA

240 µs

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.341 in (8.65 mm)

MCP6542-E/P

Microchip Technology

Comparator

Automotive

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

7 mV

5 nA

No

2

CMOS

1 μA

Tube

5 V

1.6/5.5 V

In-Line

DIP8,.3

Comparators

7 V

0.1 in (2.54 mm)

125 °C (257 °F)

4 µs

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

R-PDIP-T8

0.21 in (5.334 mm)

0.3 in (7.62 mm)

No

e3

0.365 in (9.271 mm)

MCP6544-E/SL

Microchip Technology

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

7 mV

5 nA

Yes

4

CMOS

1 μA

Tube

5 V

1.6/5.5 V

Small Outline

SOP14,.25

Comparators

7 V

0.05 in (1.27 mm)

125 °C (257 °F)

4 µs

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

40

260 °C (500 °F)

0.341 in (8.65 mm)

MCP6546-E/MS

Microchip Technology

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

7 mV

5 nA

Yes

1

CMOS

TS 16949

1 μA

Tube

5 V

1.6/5.5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

7 V

0.026 in (0.65 mm)

125 °C (257 °F)

3 µs

Open-Drain

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

40

260 °C (500 °F)

0.118 in (3 mm)

TLV3011AIDCKTG4

Texas Instruments

Comparator

Automotive

Gull Wing

6

TSSOP

Rectangular

Plastic/Epoxy

15 mV

Yes

1

5 μA

Tape And Reel

5 V

2/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP6,.08

Comparators

7 V

0.026 in (0.65 mm)

125 °C (257 °F)

12 µs

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G6

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e4

260 °C (500 °F)

0.079 in (2 mm)

MAX9967ALCCQ

Maxim Integrated

Comparator

Commercial

Gull Wing

100

HTFQFP

Square

Plastic/Epoxy

-7 V

20 mV

25 uA

Yes

2

BIPOLAR

-5.25 V

9.75 V

Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch

Comparators

11.5 V

0.02 in (0.5 mm)

70 °C (158 °F)

2.2 ns

Open-Collector

0 °C (32 °F)

Tin Lead

Quad

S-PQFP-G100

3

0.047 in (1.2 mm)

0.551 in (14 mm)

No

e0

0.551 in (14 mm)

MAX9967BDCCQ

Maxim Integrated

Comparator

Commercial

Gull Wing

100

HTFQFP

Square

Plastic/Epoxy

-7 V

100 mV

25 uA

Yes

2

BIPOLAR

-5.25 V

9.75 V

Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch

Comparators

11.5 V

0.02 in (0.5 mm)

70 °C (158 °F)

2.2 ns

Open-Collector

0 °C (32 °F)

Tin Lead

Quad

S-PQFP-G100

3

0.047 in (1.2 mm)

0.551 in (14 mm)

No

e0

0.551 in (14 mm)

TLV3011AIDBVTG4

Texas Instruments

Comparator

Automotive

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

15 mV

Yes

1

5 μA

Tape And Reel

5 V

2/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP6,.11,37

Comparators

7 V

0.037 in (0.95 mm)

125 °C (257 °F)

12 µs

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G6

2

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

260 °C (500 °F)

0.114 in (2.9 mm)

TLV3012AIDCKRG4

Texas Instruments

Comparator

Industrial

Gull Wing

6

TSSOP

Rectangular

Plastic/Epoxy

15 mV

Yes

1

5 μA

Tape And Reel

5 V

2/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP6,.08

Comparators

7 V

0.026 in (0.65 mm)

125 °C (257 °F)

12 µs

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G6

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e4

260 °C (500 °F)

0.079 in (2 mm)

TLV3704IDRG4

Texas Instruments

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

0 V

7 mV

1.5 nA

Yes

4

CMOS

3.2 μA

0 V

Tape And Reel

5 V

±1.35/±8/2.7/16 V

Small Outline

SOP14,.25

Comparators

17 V

0.05 in (1.27 mm)

125 °C (257 °F)

100 pA

240 µs

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.341 in (8.65 mm)

TLC339CPWG4

Texas Instruments

Comparator

Commercial

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

6.5 mV

600 pA

Yes

4

CMOS

80 μA

Tube

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

18 V

0.026 in (0.65 mm)

70 °C (158 °F)

2 pA

2.5 µs

Open-Drain

0 °C (32 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G14

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

260 °C (500 °F)

0.197 in (5 mm)

TLV1704AMPWTPSEP

Texas Instruments

Comparator

Military

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

2.5 mV

20 nA

Yes

4

BIPOLAR

Small Outline, Thin Profile, Shrink Pitch

Comparators

40 V

0.026 in (0.65 mm)

125 °C (257 °F)

15 nA

560 ns

Open-Collector

-55 °C (-67 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

2

0.047 in (1.2 mm)

0.173 in (4.4 mm)

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

TS880ILT

STMicroelectronics

Comparator

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

6 mV

100 pA

Yes

1

630 nA

Tape And Reel

1.2 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

6 V

0.037 in (0.95 mm)

125 °C (257 °F)

10 pA

20 µs

Open-Drain

-40 °C (-40 °F)

Dual

R-PDSO-G5

0.057 in (1.45 mm)

0.063 in (1.6 mm)

0.114 in (2.9 mm)

UPC277MP(20)-KAA-E1-A

Renesas Electronics

Comparator

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

Yes

2

BIPOLAR

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.16

Comparators

36 V

0.026 in (0.65 mm)

125 °C (257 °F)

Open-Collector

-40 °C (-40 °F)

Tin Bismuth

Dual

R-PDSO-G8

0.041 in (1.03 mm)

0.11 in (2.8 mm)

e6

0.114 in (2.9 mm)

MAX920EUK

Maxim Integrated

Comparator

Industrial

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

10 mV

2 nA

Yes

1

5 V

Small Outline, Low Profile, Shrink Pitch

Comparators

6 V

0.037 in (0.95 mm)

85 °C (185 °F)

120 µs

Open-Drain

-40 °C (-40 °F)

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.064 in (1.625 mm)

0.114 in (2.9 mm)

MAX985EUK-TG002

Maxim Integrated

Comparator

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

7 mV

10 nA

Yes

1

24 μA

Tape And Reel

2.7 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

6 V

0.037 in (0.95 mm)

85 °C (185 °F)

10 nA

450 ns

Push-Pull

-40 °C (-40 °F)

Dual

R-PDSO-G5

0.057 in (1.45 mm)

0.064 in (1.625 mm)

0.114 in (2.9 mm)

ADCMP394ARZ-RL7

Analog Devices

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

5 mV

80 nA

Yes

1

5 V

Small Outline

Comparators

6 V

0.05 in (1.27 mm)

125 °C (257 °F)

4.9 µs

Open-Drain

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

ADCMP395ARMZ-RL7

Analog Devices

Comparator

Automotive

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

5 mV

80 nA

Yes

2

5 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

6 V

0.02 in (0.5 mm)

125 °C (257 °F)

9.7 µs

Open-Drain

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G10

1

0.043 in (1.1 mm)

0.118 in (3 mm)

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.