Comparator Comparators 862

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Minimum Common Mode Reject Ratio	Technology	Screening Level	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Minimum Isolation Voltage	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Nominal Slow Rate	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Maximum Common Mode Voltage	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
TSX393IYDT	STMicroelectronics	Comparator	Automotive	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		6 mV	1.2 nA	Yes	2		CMOS	AEC-Q100				Tape And Reel	3 V		Small Outline	SOP8,.23	Comparators		18 V	0.05 in (1.27 mm)	125 °C (257 °F)	10 pA		2.5 µs	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)					0.193 in (4.9 mm)
RT2901HYDT	STMicroelectronics	Comparator	Automotive	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		15 mV	400 nA	Yes	4		BIPOLAR						5 V		Small Outline		Comparators		36 V	0.05 in (1.27 mm)	150 °C (302 °F)			1.3 µs	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G14		0.069 in (1.75 mm)	0.154 in (3.9 mm)					0.341 in (8.65 mm)
NCX2200GF3,132	NXP Semiconductors	Comparator	Industrial	No Lead	6	VSON	Square	Plastic/Epoxy		30 mV		Yes	1				9 μA			Tape And Reel, 7 Inch	1.6 V	1.6/5.5 V	Small Outline, Very Think Profile	SOLCC8,.04,14	Comparators		7 V	0.014 in (0.35 mm)	85 °C (185 °F)			800 ns	Push-Pull	-40 °C (-40 °F)	Tin	Dual	S-PDSO-N6	1	0.02 in (0.5 mm)	0.039 in (1 mm)	No	e3	30 s	260 °C (500 °F)	0.039 in (1 mm)
NCX2202GM,115	NXP Semiconductors	Comparator	Industrial	No Lead	6	VSON	Rectangular	Plastic/Epoxy		30 mV		Yes	1				9 μA			Tape And Reel, 7 Inch	1.6 V	1.6/5.5 V	Small Outline, Very Think Profile	SOLCC6,.04,20	Comparators		7 V	0.02 in (0.5 mm)	85 °C (185 °F)			800 ns	Open-Drain	-40 °C (-40 °F)	Tin	Dual	R-PDSO-N6	1	0.02 in (0.5 mm)	0.039 in (1 mm)	No	e3	30 s	260 °C (500 °F)	0.057 in (1.45 mm)
NCX2220GF,115	NXP Semiconductors	Comparator	Industrial	No Lead	8	VSON	Rectangular	Plastic/Epoxy		30 mV		Yes	1				7 μA	0 V			3 V	1.6/5.5 V	Small Outline, Very Think Profile	SOLCC6,.04,14	Comparators		7 V	0.014 in (0.35 mm)	85 °C (185 °F)			10 ns		-40 °C (-40 °F)	Tin	Dual	R-PDSO-N8	1	0.02 in (0.5 mm)	0.039 in (1 mm)	No	e3	30 s	260 °C (500 °F)	0.053 in (1.35 mm)
NCX2220GT,115	NXP Semiconductors	Comparator	Industrial	No Lead	8	VSON	Rectangular	Plastic/Epoxy		30 mV		Yes	1				7 μA	0 V			3 V	1.6/5.5 V	Small Outline, Very Think Profile	SOLCC8,.04,20	Comparators		7 V	0.02 in (0.5 mm)	85 °C (185 °F)			10 ns		-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-N8	1	0.02 in (0.5 mm)	0.039 in (1 mm)	No	e4	30 s	260 °C (500 °F)	0.077 in (1.95 mm)
RT2903HYDT	STMicroelectronics	Comparator	Automotive	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		15 mV	400 nA	Yes	2								5 V		Small Outline		Comparators		36 V	0.05 in (1.27 mm)	150 °C (302 °F)			1.3 µs	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)					0.193 in (4.9 mm)
MAX942MSA/PR-T	Maxim Integrated	Comparator	Military	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		3 mV	400 nA	Yes	2		BIPOLAR		600 μA			Tape And Reel	3 V		Small Outline	SOP8,.24	Comparators		6.5 V	0.05 in (1.27 mm)	125 °C (257 °F)			80 ns		-55 °C (-67 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)		e0	20 s	240 °C (464 °F)	0.193 in (4.9 mm)
INA301A2QDGKRQ1	Texas Instruments	Comparator	Automotive	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		50 uV		Yes	1	100 dB		AEC-Q100	700 μA			Tape And Reel	5 V		Small Outline, Thin Profile, Shrink Pitch		Comparators	4 V/us	6 V	0.026 in (0.65 mm)	125 °C (257 °F)		36 V	750 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold Silver	Dual	S-PDSO-G8	2	0.043 in (1.1 mm)	0.118 in (3 mm)		e4	30 s	260 °C (500 °F)	0.118 in (3 mm)
INA301A3QDGKRQ1	Texas Instruments	Comparator	Automotive	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		35 uV		Yes	1	100 dB		AEC-Q100	700 μA			Tape And Reel	5 V		Small Outline, Thin Profile, Shrink Pitch		Comparators	4 V/us	6 V	0.026 in (0.65 mm)	125 °C (257 °F)		36 V	750 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold Silver	Dual	S-PDSO-G8	2	0.043 in (1.1 mm)	0.118 in (3 mm)		e4	30 s	260 °C (500 °F)	0.118 in (3 mm)
INA301A3QDGKTQ1	Texas Instruments	Comparator	Automotive	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		35 uV		Yes	1	100 dB		AEC-Q100	700 μA			Tape And Reel	5 V		Small Outline, Thin Profile, Shrink Pitch		Comparators	4 V/us	6 V	0.026 in (0.65 mm)	125 °C (257 °F)		36 V	750 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold Silver	Dual	S-PDSO-G8	2	0.043 in (1.1 mm)	0.118 in (3 mm)		e4	30 s	260 °C (500 °F)	0.118 in (3 mm)
LM119MD8	Texas Instruments	Comparator	Military	No Lead		DIE			-18 V	6.8 mV	5 uA	Yes	1		BIPOLAR	MIL-STD-883	11 mA	-15 V					Uncased Chip		Comparators		36 V		125 °C (257 °F)	500 nA		80 ns	Open-Collector	-55 °C (-67 °F)		Upper	X-XUUC-N	1
LM111-MDE	Texas Instruments	Comparator	Military	No Lead		DIE	Rectangular		-30 V	3 mV	100 nA	Yes	1		BIPOLAR		6 mA	-15 V			15 V		Uncased Chip		Comparators		30 V		125 °C (257 °F)	100 nA		200 ns	Open-Collector, Open-Drain	-55 °C (-67 °F)		Upper	R-XUUC-N	1
BA2903YFVM-MGTR	ROHM	Comparator	Automotive	Gull Wing	8	VSSOP	Rectangular	Plastic/Epoxy		15 mV	500 nA	Yes	2		BIPOLAR					Tape And Reel	5 V		Small Outline, Very Thin Profile, Shrink Pitch		Comparators		36 V	0.026 in (0.65 mm)	125 °C (257 °F)			1.3 µs	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.035 in (0.9 mm)	0.11 in (2.8 mm)					0.114 in (2.9 mm)
UPC393GR(5)-9LG-E1-A	Renesas Electronics	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		2.5 mV	60 nA	Yes	2		BIPOLAR		1 mA				5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators		32 V	0.026 in (0.65 mm)	85 °C (185 °F)	60 nA		1.8 µs	Open-Collector	-40 °C (-40 °F)	Tin Bismuth	Dual	R-PDSO-G8		0.047 in (1.2 mm)	0.118 in (3 mm)	No	e6			0.173 in (4.4 mm)
UPC393GR-9LG-E2-A	Renesas Electronics	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		5 mV	250 nA	Yes	2		BIPOLAR		1 mA				5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators		32 V	0.026 in (0.65 mm)	85 °C (185 °F)	250 nA		1.8 µs	Open-Collector	-40 °C (-40 °F)	Tin Bismuth	Dual	R-PDSO-G8		0.047 in (1.2 mm)	0.118 in (3 mm)	No	e6			0.173 in (4.4 mm)
HMC674LC3CTR-R5	Analog Devices	Comparator	Industrial	No Lead	16	HVQCCN	Square	Ceramic, Metal-Sealed Cofired	-3.3 V			Yes	1					-3 V			3.3 V		Chip Carrier, Heat Sink/Slug, Very Thin Profile		Comparators		4 V	0.02 in (0.5 mm)	85 °C (185 °F)			0.085 ns		-40 °C (-40 °F)		Quad	S-CQCC-N16		0.036 in (0.92 mm)	0.114 in (2.9 mm)					0.114 in (2.9 mm)
HMC974LC3CTR-R5	Analog Devices	Comparator	Industrial	No Lead	16	HVQCCN	Square	Ceramic, Metal-Sealed Cofired	-3.3 V	10 mV	30 uA	Yes	1					-3 V			3.3 V		Chip Carrier, Heat Sink/Slug, Very Thin Profile		Comparators		4 V	0.02 in (0.5 mm)	85 °C (185 °F)			0.088 ns		-40 °C (-40 °F)		Quad	S-CQCC-N16		0.035 in (0.9 mm)	0.114 in (2.9 mm)					0.114 in (2.9 mm)
TLV7011DCKR	Texas Instruments	Comparator	Automotive	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		8 mV	5 pA	Yes	1				10 μA				1.8 V		Small Outline, Thin Profile, Shrink Pitch		Comparators		6 V	0.026 in (0.65 mm)	125 °C (257 °F)	5 pA		310 ns	Push-Pull	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G5	2	0.043 in (1.1 mm)	0.049 in (1.25 mm)		e4		260 °C (500 °F)	0.079 in (2 mm)
TLV1704AMPWPSEP	Texas Instruments	Comparator	Military	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		2.5 mV	20 nA	Yes	4		BIPOLAR								Small Outline, Thin Profile, Shrink Pitch		Comparators		40 V	0.026 in (0.65 mm)	125 °C (257 °F)	15 nA		560 ns	Open-Collector	-55 °C (-67 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	2	0.047 in (1.2 mm)	0.173 in (4.4 mm)		e4	30 s	260 °C (500 °F)	0.197 in (5 mm)
MCP6542T-E/MSVAO	Microchip Technology	Comparator	Automotive	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		7 mV	5 nA	Yes	2		CMOS	TS 16949	2 μA				5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators		7 V	0.026 in (0.65 mm)	125 °C (257 °F)			4 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	S-PDSO-G8		0.043 in (1.1 mm)	0.118 in (3 mm)		e3			0.118 in (3 mm)
MCP6541T-E/OTGVAO	Microchip Technology	Comparator	Automotive	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy		7 mV	5 nA	Yes	1		CMOS	TS 16949	1 μA				5 V		Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators		7 V	0.037 in (0.95 mm)	125 °C (257 °F)			4 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G5		0.057 in (1.45 mm)	0.061 in (1.55 mm)		e3			0.114 in (2.9 mm)
MCP6566T-E/LTVAO	Microchip Technology	Comparator	Automotive	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		10 mV	5 nA	Yes	1		CMOS	TS 16949	130 μA			Tape And Reel	1.8 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators		6.5 V	0.026 in (0.65 mm)	125 °C (257 °F)			80 ns	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G5		0.043 in (1.1 mm)	0.049 in (1.25 mm)		e3			0.079 in (2 mm)
MCP6567-E/MSVAO	Microchip Technology	Comparator	Automotive	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		10 mV	5 nA	Yes	2		CMOS	TS 16949	260 μA			Tube	1.8 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators		6.5 V	0.026 in (0.65 mm)	125 °C (257 °F)			80 ns	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8		0.043 in (1.1 mm)	0.118 in (3 mm)		e3			0.118 in (3 mm)
MCP6567T-E/MSVAO	Microchip Technology	Comparator	Automotive	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		10 mV	5 nA	Yes	2		CMOS	TS 16949	260 μA			Tape And Reel	1.8 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators		6.5 V	0.026 in (0.65 mm)	125 °C (257 °F)			80 ns	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8		0.043 in (1.1 mm)	0.118 in (3 mm)		e3			0.118 in (3 mm)
MCP6541T-E/OTVAO	Microchip Technology	Comparator	Automotive	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy		7 mV	5 nA	Yes	1		CMOS	AEC-Q100; TS 16949	1 μA			Tape And Reel	5 V		Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators		7 V	0.037 in (0.95 mm)	125 °C (257 °F)			4 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G5		0.057 in (1.45 mm)	0.061 in (1.55 mm)		e3			0.114 in (2.9 mm)
MCP6542T-E/SNVAO	Microchip Technology	Comparator	Automotive	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		7 mV	5 nA	Yes	2		CMOS	AEC-Q100; TS 16949	2 μA			Tape And Reel	5 V		Small Outline	SOP8,.25	Comparators		7 V	0.05 in (1.27 mm)	125 °C (257 °F)			4 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)		e3			0.193 in (4.9 mm)
MCP6546T-E/OTVAO	Microchip Technology	Comparator	Automotive	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy		7 mV	5 nA	Yes	1		CMOS	AEC-Q100	1 μA			Tape And Reel	5 V		Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators		7 V	0.037 in (0.95 mm)	125 °C (257 °F)			3 µs	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G5		0.057 in (1.45 mm)	0.059 in (1.5 mm)		e3			0.114 in (2.9 mm)
MCP6547T-E/MSVAO	Microchip Technology	Comparator	Automotive	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		7 mV	5 nA	Yes	2		CMOS	AEC-Q100	2 μA			Tape And Reel	5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators		7 V	0.026 in (0.65 mm)	125 °C (257 °F)			3 µs	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	S-PDSO-G8		0.043 in (1.1 mm)	0.118 in (3 mm)		e3			0.118 in (3 mm)
MCP6561T-E/LTVAO	Microchip Technology	Comparator	Automotive	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		10 mV	5 nA	Yes	1		CMOS	AEC-Q100	130 μA			Tape And Reel	1.8 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators		6.5 V	0.026 in (0.65 mm)	125 °C (257 °F)			56 ns	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G5		0.043 in (1.1 mm)	0.049 in (1.25 mm)					0.079 in (2 mm)
MCP6561T-E/OTVAO	Microchip Technology	Comparator	Automotive	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy		10 mV	5 nA	Yes	1		CMOS	AEC-Q100	130 μA			Tape And Reel	1.8 V		Small Outline, Low Profile, Shrink Pitch	TSOP6,.11,37	Comparators		6.5 V	0.037 in (0.95 mm)	125 °C (257 °F)			56 ns	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G5		0.057 in (1.45 mm)	0.1 in (2.55 mm)					0.114 in (2.9 mm)
MCP6562T-E/MSVAO	Microchip Technology	Comparator	Automotive	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		10 mV	5 nA	Yes	2		CMOS	AEC-Q100	260 μA			Tape And Reel	1.8 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators		6.5 V	0.026 in (0.65 mm)	125 °C (257 °F)			56 ns	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	S-PDSO-G8		0.043 in (1.1 mm)	0.118 in (3 mm)		e3			0.118 in (3 mm)
MCP6566T-E/OTVAO	Microchip Technology	Comparator	Automotive	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy		10 mV	5 nA	Yes	1		CMOS	AEC-Q100; TS 16949	130 μA			Tape And Reel	1.8 V		Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators		6.5 V	0.037 in (0.95 mm)	125 °C (257 °F)			56 ns	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G5		0.057 in (1.45 mm)	0.061 in (1.55 mm)		e3			0.114 in (2.9 mm)
TLV3604DCKT	Texas Instruments	Comparator	Automotive	Gull Wing	6	TSSOP	Rectangular	Plastic/Epoxy		5 mV	5 uA	Yes	1				17.5 mA				2.5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP6,.08			5.5 V	0.026 in (0.65 mm)	125 °C (257 °F)	5 uA		0.8 ns		-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G6	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)		e4	30 s	260 °C (500 °F)	0.079 in (2 mm)
TLV7022DSGR	Texas Instruments	Comparator	Automotive	No Lead	8	HVSON	Square	Plastic/Epoxy		8 mV	2 pA	Yes	2				18 μA			Tape And Reel	5 V		Small Outline, Heat Sink/Slug, Very Thin Profile	SOLCC8,.08,20	Comparators		7 V	0.02 in (0.5 mm)	125 °C (257 °F)	2 pA		260 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	S-PDSO-N8	1	0.031 in (0.8 mm)	0.079 in (2 mm)		e4	30 s	260 °C (500 °F)	0.079 in (2 mm)
LM393LVQDRQ1	Texas Instruments	Comparator	Automotive	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		3 mV		Yes	2			AEC-Q100	100 μA			Tape And Reel, 13 Inch	5 V		Small Outline	SOP8,.25	Comparators		6 V	0.05 in (1.27 mm)	125 °C (257 °F)			600 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.153 in (3.895 mm)		e4	30 s	260 °C (500 °F)	0.193 in (4.905 mm)
TLV3605RVKT	Texas Instruments	Comparator	Automotive	No Lead	12		Square			5 mV	5 uA	Yes	1				17.5 mA			Tape And Reel	2.5 V						6 V		125 °C (257 °F)	5 uA		0.8 ns		-40 °C (-40 °F)	Nickel Palladium Gold	Quad	S-XQCC-N12	1				e4	30 s	260 °C (500 °F)
PLM393LVQPWRQ1	Texas Instruments	Comparator		Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		2 mV		Yes	2			AEC-Q100	70 μA			Tape And Reel	5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators		6 V	0.026 in (0.65 mm)	125 °C (257 °F)	5 pA		600 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)		e4	30 s	260 °C (500 °F)	0.173 in (4.4 mm)
TLV3601DCKT	Texas Instruments	Comparator		Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		5 mV	5 uA	Yes	1				7 mA			Tape And Reel	2.5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08			6 V	0.026 in (0.65 mm)	125 °C (257 °F)	5 uA		2.5 ns	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)		e4		260 °C (500 °F)	0.079 in (2 mm)
TLV3801DSGT	Texas Instruments	Comparator		No Lead	8	HVSON	Square	Plastic/Epoxy		5 mV	10 uA	Yes	1				26.6 mA			Tape And Reel	3.3 V		Small Outline, Heat Sink/Slug, Very Thin Profile	SOLCC8,.08,20			5.5 V	0.02 in (0.5 mm)	125 °C (257 °F)			0.225 ns		-40 °C (-40 °F)	Matte Tin	Dual	S-PDSO-N8	2	0.031 in (0.8 mm)	0.079 in (2 mm)		e3		260 °C (500 °F)	0.079 in (2 mm)
TLV3601DBVT	Texas Instruments	Comparator		Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy		5 mV	5 uA	Yes	1				7 mA			Tape And Reel	2.5 V		Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37			6 V	0.037 in (0.95 mm)	125 °C (257 °F)	5 uA		2.5 ns	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.063 in (1.6 mm)		e4		260 °C (500 °F)	0.114 in (2.9 mm)
AMC23C14DWV	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular	Plastic/Epoxy			25 nA	Yes	2				2.2 mA		750 V		3.3 V		Small Outline	SOP8,.45			6.5 V	0.05 in (1.27 mm)	125 °C (257 °F)			280 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	3	0.11 in (2.8 mm)	0.23 in (5.85 mm)		e4		260 °C (500 °F)	0.295 in (7.5 mm)
AMC23C12DWVR	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular	Plastic/Epoxy			25 nA	Yes	1				4.3 mA		750 V	Tape And Reel	5 V		Small Outline	SOP8,.45			30 V	0.05 in (1.27 mm)	125 °C (257 °F)			280 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	3	0.11 in (2.8 mm)	0.23 in (5.85 mm)		e4		260 °C (500 °F)	0.295 in (7.5 mm)
TLV3811YBGT	Texas Instruments	Comparator		Ball	6	VFBGA	Rectangular			5 mV	10 uA	Yes	1				23 mA			Tape And Reel	3.3 V		Grid Array, Very Thin Profile, Fine Pitch	BGA6,2X3,16			5.5 V	0.016 in (0.4 mm)	125 °C (257 °F)			0.225 ns		-40 °C (-40 °F)	Tin Silver Copper	Bottom	R-XBGA-B6	1	0.02 in (0.5 mm)	0.032 in (0.818 mm)		e1		260 °C (500 °F)	0.048 in (1.218 mm)
TLV3602DGKT	Texas Instruments	Comparator		Gull Wing	8	TSSOP	Square	Plastic/Epoxy		5 mV	5 uA	Yes	2				14 mA			Tape And Reel	2.5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19			6 V	0.026 in (0.65 mm)	125 °C (257 °F)	5 uA		2.5 ns	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)		e4		260 °C (500 °F)	0.118 in (3 mm)
TLV3811CYBGT	Texas Instruments	Comparator		Ball	6	VFBGA	Rectangular			5 mV	10 uA	Yes	1				23 mA			Tape And Reel	3.3 V		Grid Array, Very Thin Profile, Fine Pitch	BGA6,2X3,16			5.5 V	0.016 in (0.4 mm)	125 °C (257 °F)			0.225 ns		-40 °C (-40 °F)	Tin/Silver/Copper	Bottom	R-XBGA-B6	1	0.02 in (0.5 mm)	0.032 in (0.818 mm)		e1			0.048 in (1.218 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.