Comparator Comparators 862

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
MAX976ESA	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		3 mV	300 nA	Yes	2	CMOS	1.3 mA		5 V	3/5 V	Small Outline	SOP8,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	300 nA	28 ns	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0	20 s	240 °C (464 °F)	0.193 in (4.9 mm)
MAX976EUA	Maxim Integrated	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		3 mV	300 nA	Yes	2	CMOS	1.3 mA		5 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	300 nA	28 ns	Push-Pull	-40 °C (-40 °F)	Tin/Lead	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e0	20 s	240 °C (464 °F)	0.118 in (3 mm)
MAX998EUT-T	Maxim Integrated	Comparator	Industrial	Gull Wing	6	LSSOP	Rectangular	Plastic/Epoxy		3 mV	300 nA	Yes	1	CMOS	650 μA		5 V	3/5 V	Small Outline, Low Profile, Shrink Pitch	TSOP6,.11,37	Comparators	6 V	0.037 in (0.95 mm)	85 °C (185 °F)	300 nA	28 ns	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G6	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)	No	e0	20 s	240 °C (464 °F)	0.114 in (2.9 mm)
MAX998ESA	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		3 mV	300 nA	Yes	1	CMOS	650 μA		5 V	3/5 V	Small Outline	SOP8,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	300 nA	28 ns	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.193 in (4.9 mm)
MAX907C/D	Maxim Integrated	Comparator	Commercial	No Lead	8	DIE	Rectangular			2 mV	300 nA	Yes	2	CMOS	2 mA		5 V	5 V	Uncased Chip	DIE OR CHIP	Comparators	14 V		70 °C (158 °F)	300 nA	30 ns		0 °C (32 °F)	Tin Lead	Upper	R-XUUC-N8	1			No	e0
MAX907CPA	Maxim Integrated	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy		3.5 mV	500 nA	No	2	BIPOLAR	1.2 mA		5 V	5 V	In-Line	DIP8,.3	Comparators	6 V	0.1 in (2.54 mm)	70 °C (158 °F)	300 nA	45 ns		0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T8	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e0			0.369 in (9.375 mm)
MAX907CSA	Maxim Integrated	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		3.5 mV	500 nA	Yes	2	BIPOLAR	1.2 mA		5 V	5 V	Small Outline	SOP8,.25	Comparators	6 V	0.05 in (1.27 mm)	70 °C (158 °F)	300 nA	45 ns		0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0	20 s	240 °C (464 °F)	0.193 in (4.9 mm)
MAX907EPA	Maxim Integrated	Comparator	Industrial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy		3.5 mV	500 nA	No	2	BIPOLAR	1.2 mA		5 V	5 V	In-Line	DIP8,.3	Comparators	6 V	0.1 in (2.54 mm)	85 °C (185 °F)	300 nA	45 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDIP-T8	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e0		245 °C (473 °F)	0.369 in (9.375 mm)
MAX907ESA	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		3.5 mV	500 nA	Yes	2	BIPOLAR	1.2 mA		5 V	5 V	Small Outline	SOP8,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	300 nA	45 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0		245 °C (473 °F)	0.193 in (4.9 mm)
MAX908CPD	Maxim Integrated	Comparator	Commercial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy		3.5 mV	500 nA	No	4	BIPOLAR	1.2 mA		5 V	5 V	In-Line	DIP14,.3	Comparators	6 V	0.1 in (2.54 mm)	70 °C (158 °F)	300 nA	45 ns		0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T14	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e0			0.75 in (19.05 mm)
MAX908CSD	Maxim Integrated	Comparator	Commercial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		3.5 mV	500 nA	Yes	4	BIPOLAR	1.2 mA		5 V	5 V	Small Outline	SOP14,.25	Comparators	6 V	0.05 in (1.27 mm)	70 °C (158 °F)	300 nA	45 ns		0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.341 in (8.65 mm)
MAX908EPD	Maxim Integrated	Comparator	Industrial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy		3.5 mV	500 nA	No	4	BIPOLAR	1.2 mA		5 V	5 V	In-Line	DIP14,.3	Comparators	6 V	0.1 in (2.54 mm)	85 °C (185 °F)	300 nA	45 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDIP-T14	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e0			0.75 in (19.05 mm)
MAX961ESA	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		2 mV	15 uA	Yes	1	CMOS	11 mA		3 V	3/5 V	Small Outline	SOP8,.25	Comparators	5.5 V	0.05 in (1.27 mm)	85 °C (185 °F)	15 uA	4.5 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0	20 s	240 °C (464 °F)	0.193 in (4.9 mm)
MAX963ESD	Maxim Integrated	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		2 mV	15 uA	Yes	2	CMOS	22 mA		3 V	3/5 V	Small Outline	SOP14,.25	Comparators	5.5 V	0.05 in (1.27 mm)	85 °C (185 °F)	15 uA	4.5 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.341 in (8.65 mm)
MAX964EEE	Maxim Integrated	Comparator	Industrial	Gull Wing	16	SSOP	Rectangular	Plastic/Epoxy		2 mV	15 uA	Yes	4	CMOS	36 mA		3 V	3/5 V	Small Outline, Shrink Pitch	SSOP16,.25	Comparators	5.5 V	0.025 in (0.635 mm)	85 °C (185 °F)	15 uA	4.5 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G16	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0	20 s	240 °C (464 °F)	0.193 in (4.89 mm)
MAX964ESE	Maxim Integrated	Comparator	Industrial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy		2 mV	15 uA	Yes	4	CMOS	36 mA		3 V	3/5 V	Small Outline	SOP16,.25	Comparators	5.5 V	0.05 in (1.27 mm)	85 °C (185 °F)	15 uA	4.5 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G16	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.39 in (9.9 mm)
MAX997ESA	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		2 mV	15 uA	Yes	1	CMOS	650 μA		3 V	3/5 V	Small Outline	SOP8,.25	Comparators	5.5 V	0.05 in (1.27 mm)	85 °C (185 °F)	15 uA	4.5 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.193 in (4.9 mm)
MAX961EUA	Maxim Integrated	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		4.5 mV	30 uA	Yes	1	CMOS	11 mA		3 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	5.5 V	0.026 in (0.65 mm)	85 °C (185 °F)	30 uA	4.5 ns		-40 °C (-40 °F)	Tin Lead	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e0		245 °C (473 °F)	0.118 in (3 mm)
MAX962EUA	Maxim Integrated	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		4.5 mV	30 uA	Yes	2	CMOS	18 mA		3 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	5.5 V	0.026 in (0.65 mm)	85 °C (185 °F)	15 uA	4.5 ns		-40 °C (-40 °F)	Tin Lead	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e0	20 s	240 °C (464 °F)	0.118 in (3 mm)
MAX997EUA	Maxim Integrated	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		4.5 mV	30 uA	Yes	1	CMOS	650 μA		3 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	5.5 V	0.026 in (0.65 mm)	85 °C (185 °F)	15 uA	4.5 ns		-40 °C (-40 °F)	Tin Lead	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e0			0.118 in (3 mm)
MAX999EUK-T	Maxim Integrated	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy		4.5 mV	30 uA	Yes	1	CMOS	6.5 mA		3 V	3/5 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	5.5 V	0.037 in (0.95 mm)	85 °C (185 °F)	15 uA	4.5 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)	No	e0	20 s	240 °C (464 °F)	0.114 in (2.9 mm)
MAX921CPA	Maxim Integrated	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	-0.3 V	10 mV		No	1	CMOS	4 μA		3 V	±1.25/±5.5/2.5/11 V	In-Line	DIP8,.3	Comparators	12 V	0.1 in (2.54 mm)	70 °C (158 °F)		14 µs		0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T8	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e0			0.369 in (9.375 mm)
MAX921CSA	Maxim Integrated	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-0.3 V	10 mV		Yes	1	CMOS	4 μA		3 V	±1.25/±5.5/2.5/11 V	Small Outline	SOP8,.25	Comparators	12 V	0.05 in (1.27 mm)	70 °C (158 °F)		14 µs		0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.193 in (4.9 mm)
MAX921CUA	Maxim Integrated	Comparator	Commercial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy	-0.3 V	10 mV		Yes	1	CMOS	4 μA		3 V	±1.25/±5.5/2.5/11 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	12 V	0.026 in (0.65 mm)	70 °C (158 °F)		14 µs		0 °C (32 °F)	Tin Lead	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e0	20 s	240 °C (464 °F)	0.118 in (3 mm)
MAX921EPA	Maxim Integrated	Comparator	Industrial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	-0.3 V	10 mV		No	1	CMOS	4 μA		3 V	±1.25/±5.5/2.5/11 V	In-Line	DIP8,.3	Comparators	12 V	0.1 in (2.54 mm)	85 °C (185 °F)		14 µs		-40 °C (-40 °F)	Tin Lead	Dual	R-PDIP-T8	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e0			0.369 in (9.375 mm)
MAX921ESA	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-0.3 V	10 mV		Yes	1	CMOS	4 μA		3 V	±1.25/±5.5/2.5/11 V	Small Outline	SOP8,.25	Comparators	12 V	0.05 in (1.27 mm)	85 °C (185 °F)		14 µs		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0	20 s	240 °C (464 °F)	0.193 in (4.9 mm)
MAX922CPA	Maxim Integrated	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	-0.3 V	10 mV		No	2	CMOS	4 μA		3 V	±1.25/±5.5/2.5/11 V	In-Line	DIP8,.3	Comparators	12 V	0.1 in (2.54 mm)	70 °C (158 °F)		14 µs		0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T8	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e0		245 °C (473 °F)	0.369 in (9.375 mm)
MAX922CUA	Maxim Integrated	Comparator	Commercial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy	-0.3 V	10 mV		Yes	2	CMOS	4 μA		3 V	±1.25/±5.5/2.5/11 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	12 V	0.026 in (0.65 mm)	70 °C (158 °F)		14 µs		0 °C (32 °F)	Tin Lead	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e0			0.118 in (3 mm)
MAX922EPA	Maxim Integrated	Comparator	Industrial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	-0.3 V	10 mV		No	2	CMOS	4 μA		3 V	±1.25/±5.5/2.5/11 V	In-Line	DIP8,.3	Comparators	12 V	0.1 in (2.54 mm)	85 °C (185 °F)		14 µs		-40 °C (-40 °F)	Tin Lead	Dual	R-PDIP-T8	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e0			0.369 in (9.375 mm)
MAX922ESA	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-0.3 V	10 mV		Yes	2	CMOS	4 μA		3 V	±1.25/±5.5/2.5/11 V	Small Outline	SOP8,.25	Comparators	12 V	0.05 in (1.27 mm)	85 °C (185 °F)		14 µs		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0	20 s	240 °C (464 °F)	0.193 in (4.9 mm)
MAX923CPA	Maxim Integrated	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	-0.3 V	10 mV		No	2	CMOS	6 μA		3 V	±1.25/±5.5/2.5/11 V	In-Line	DIP8,.3	Comparators	12 V	0.1 in (2.54 mm)	70 °C (158 °F)		14 µs		0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T8	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e0			0.369 in (9.375 mm)
MAX923CSA	Maxim Integrated	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-0.3 V	10 mV		Yes	2	CMOS	6 μA		3 V	±1.25/±5.5/2.5/11 V	Small Outline	SOP8,.25	Comparators	12 V	0.05 in (1.27 mm)	70 °C (158 °F)		14 µs		0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.193 in (4.9 mm)
MAX923EPA	Maxim Integrated	Comparator	Industrial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	-0.3 V	10 mV		No	2	CMOS	6 μA		3 V	±1.25/±5.5/2.5/11 V	In-Line	DIP8,.3	Comparators	12 V	0.1 in (2.54 mm)	85 °C (185 °F)		14 µs		-40 °C (-40 °F)	Tin Lead	Dual	R-PDIP-T8	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e0			0.369 in (9.375 mm)
MAX923ESA	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-0.3 V	10 mV		Yes	2	CMOS	6 μA		3 V	±1.25/±5.5/2.5/11 V	Small Outline	SOP8,.25	Comparators	12 V	0.05 in (1.27 mm)	85 °C (185 °F)		14 µs		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.193 in (4.9 mm)
MAX924CPE	Maxim Integrated	Comparator	Commercial	Through-Hole	16	DIP	Rectangular	Plastic/Epoxy	-0.3 V	10 mV		No	4	CMOS	9 μA		3 V	3/5 V	In-Line	DIP16,.3	Comparators	12 V	0.1 in (2.54 mm)	70 °C (158 °F)		14 µs		0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T16	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e0			0.755 in (19.175 mm)
MAX924CSE	Maxim Integrated	Comparator	Commercial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	-0.3 V	10 mV		Yes	4	CMOS	9 μA		3 V	3/5 V	Small Outline	SOP16,.25	Comparators	12 V	0.05 in (1.27 mm)	70 °C (158 °F)		14 µs		0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G16	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.39 in (9.9 mm)
MAX924EPE	Maxim Integrated	Comparator	Industrial	Through-Hole	16	DIP	Rectangular	Plastic/Epoxy	-0.3 V	10 mV		No	4	CMOS	9 μA		3 V	3/5 V	In-Line	DIP16,.3	Comparators	12 V	0.1 in (2.54 mm)	85 °C (185 °F)		14 µs		-40 °C (-40 °F)	Tin Lead	Dual	R-PDIP-T16	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e0			0.755 in (19.175 mm)
MAX924ESE	Maxim Integrated	Comparator	Industrial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	-0.3 V	10 mV		Yes	4	CMOS	9 μA		3 V	3/5 V	Small Outline	SOP16,.25	Comparators	12 V	0.05 in (1.27 mm)	85 °C (185 °F)		14 µs		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G16	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.39 in (9.9 mm)
MAX516ACNG	Maxim Integrated	Comparator	Commercial	Through-Hole	24	DIP	Rectangular	Plastic/Epoxy		10 mV	400 nA	No	4	CMOS	10 mA		4.75 V	5/15 V	In-Line	DIP24,.3	Comparators	17 V	0.1 in (2.54 mm)	70 °C (158 °F)	300 nA	800 ns		0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T24	1	0.225 in (5.72 mm)	0.3 in (7.62 mm)	No	e0
MAX516AENG	Maxim Integrated	Comparator	Industrial	Through-Hole	24	DIP	Rectangular	Plastic/Epoxy		10 mV	400 nA	No	4	CMOS	10 mA		4.75 V	5/15 V	In-Line	DIP24,.3	Comparators	17 V	0.1 in (2.54 mm)	85 °C (185 °F)	300 nA	800 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDIP-T24	1	0.225 in (5.72 mm)	0.3 in (7.62 mm)	No	e0		245 °C (473 °F)
MAX516ACWG	Maxim Integrated	Comparator	Commercial	Gull Wing	24	SOP	Rectangular	Plastic/Epoxy		10 mV	400 nA	Yes	4	CMOS	10 mA		4.75 V	5/15 V	Small Outline	SOP24,.4	Comparators	17 V	0.05 in (1.27 mm)	70 °C (158 °F)	300 nA	800 ns		0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G24	1			No	e0
MAX516AEWG	Maxim Integrated	Comparator	Industrial	Gull Wing	24	SOP	Rectangular	Plastic/Epoxy		10 mV	400 nA	Yes	4	CMOS	10 mA		4.75 V	5/15 V	Small Outline	SOP24,.4	Comparators	17 V	0.05 in (1.27 mm)	85 °C (185 °F)	300 nA	800 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G24	1			No	e0		245 °C (473 °F)
MAX516BCNG	Maxim Integrated	Comparator	Commercial	Through-Hole	24	DIP	Rectangular	Plastic/Epoxy		15 mV	400 nA	No	4	CMOS	10 mA		4.75 V	5/15 V	In-Line	DIP24,.3	Comparators	17 V	0.1 in (2.54 mm)	70 °C (158 °F)	300 nA	800 ns		0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T24	1	0.225 in (5.72 mm)	0.3 in (7.62 mm)	No	e0		245 °C (473 °F)
MAX516BENG	Maxim Integrated	Comparator	Industrial	Through-Hole	24	DIP	Rectangular	Plastic/Epoxy		15 mV	400 nA	No	4	CMOS	10 mA		4.75 V	5/15 V	In-Line	DIP24,.3	Comparators	17 V	0.1 in (2.54 mm)	85 °C (185 °F)	300 nA	800 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDIP-T24	1	0.225 in (5.72 mm)	0.3 in (7.62 mm)	No	e0		245 °C (473 °F)
MAX516BCWG	Maxim Integrated	Comparator	Commercial	Gull Wing	24	SOP	Rectangular	Plastic/Epoxy		15 mV	400 nA	Yes	4	CMOS	10 mA		4.75 V	5/15 V	Small Outline	SOP24,.4	Comparators	17 V	0.05 in (1.27 mm)	70 °C (158 °F)	300 nA	800 ns		0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G24	1			No	e0		245 °C (473 °F)
MAX516BEWG	Maxim Integrated	Comparator	Industrial	Gull Wing	24	SOP	Rectangular	Plastic/Epoxy		15 mV	400 nA	Yes	4	CMOS	10 mA		4.75 V	5/15 V	Small Outline	SOP24,.4	Comparators	17 V	0.05 in (1.27 mm)	85 °C (185 °F)	300 nA	800 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G24	1			No	e0		245 °C (473 °F)
MXL1016CN8	Maxim Integrated	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	-7 V	3.5 mV	13 uA	No	1	TTL	35 mA	-5 V	5 V	5/±5 V	In-Line	DIP8,.3	Comparators	7 V	0.1 in (2.54 mm)	70 °C (158 °F)	10 uA	10 ns	Push-Pull	0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T8	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e0		245 °C (473 °F)	0.369 in (9.375 mm)
MXL1016CS8	Maxim Integrated	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-7 V	3.5 mV	13 uA	Yes	1	TTL	35 mA	-5 V	5 V	5/±5 V	Small Outline	SOP8,.25	Comparators	7 V	0.05 in (1.27 mm)	70 °C (158 °F)	10 uA	10 ns	Push-Pull	0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.193 in (4.9 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.