Comparator Comparators 862

Reset All
Part RoHS Manufacturer Amplifier Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material Nominal Unity Gain Bandwidth Maximum Negative Supply Voltage Limit Maximum Input Offset Voltage Maximum Average Bias Current (IIB) Surface Mount No. of Functions Minimum Common Mode Reject Ratio Technology Screening Level Nominal Common Mode Reject Ratio Maximum Supply Current Nominal Negative Supply Voltage (Vsup) Minimum Isolation Voltage Packing Method Nominal Supply Voltage / Vsup (V) Power Supplies (V) Package Style (Meter) Package Equivalence Code Sub-Category Nominal Slow Rate Maximum Supply Voltage Limit Terminal Pitch Maximum Operating Temperature Maximum Bias Current (IIB) @25C Maximum Common Mode Voltage Nominal Response Time Output Type Minimum Operating Temperature Terminal Finish Terminal Position JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Nominal Bandwidth (3dB) JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length

MAX9021AUK-T

Maxim Integrated

Comparator

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

0 V

8 mV

80 nA

Yes

1

5 μA

0 V

5 V

±1.25/±2.75/2.5/5.5 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

6 V

0.037 in (0.95 mm)

125 °C (257 °F)

8 µs

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.064 in (1.625 mm)

No

e0

0.114 in (2.9 mm)

MAX9021AXK-T

Maxim Integrated

Comparator

Automotive

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

0 V

8 mV

80 nA

Yes

1

5 μA

0 V

5 V

±1.25/±2.75/2.5/5.5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

8 µs

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e0

0.079 in (2 mm)

MAX9022AKA-T

Maxim Integrated

Comparator

Automotive

Gull Wing

8

LSSOP

Rectangular

Plastic/Epoxy

0 V

8 mV

80 nA

Yes

2

10 μA

0 V

5 V

±1.25/±2.75/2.5/5.5 V

Small Outline, Low Profile, Shrink Pitch

TSSOP8,.1

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

8 µs

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

1

0.057 in (1.45 mm)

0.064 in (1.625 mm)

No

e0

0.114 in (2.9 mm)

MAX9022AKA

Maxim Integrated

Comparator

Automotive

Gull Wing

8

LSSOP

Rectangular

Plastic/Epoxy

0 V

8 mV

80 nA

Yes

2

5 μA

0 V

5 V

±1.25/±2.75/2.5/5.5 V

Small Outline, Low Profile, Shrink Pitch

TSSOP8,.1

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

80 nA

8 µs

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

1

0.057 in (1.45 mm)

0.064 in (1.625 mm)

No

e0

0.114 in (2.9 mm)

MAX9022ASA-T

Maxim Integrated

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

8 mV

80 nA

Yes

2

10 μA

0 V

5 V

±1.25/±2.75/2.5/5.5 V

Small Outline

SOP8,.25

Comparators

6 V

0.05 in (1.27 mm)

125 °C (257 °F)

8 µs

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

0.193 in (4.9 mm)

MAX9022ASA

Maxim Integrated

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

8 mV

80 nA

Yes

2

10 μA

0 V

5 V

±1.25/±2.75/2.5/5.5 V

Small Outline

SOP8,.25

Comparators

6 V

0.05 in (1.27 mm)

125 °C (257 °F)

8 µs

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

0.193 in (4.9 mm)

MAX9022AUA-T

Maxim Integrated

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

0 V

8 mV

80 nA

Yes

2

10 μA

0 V

5 V

±1.25/±2.75/2.5/5.5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

8 µs

-40 °C (-40 °F)

Tin Lead

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e0

245 °C (473 °F)

0.118 in (3 mm)

MAX9022AUA

Maxim Integrated

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

0 V

8 mV

80 nA

Yes

2

10 μA

0 V

5 V

±1.25/±2.75/2.5/5.5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

8 µs

-40 °C (-40 °F)

Tin Lead

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e0

245 °C (473 °F)

0.118 in (3 mm)

MAX9024ASD-T

Maxim Integrated

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

0 V

8 mV

80 nA

Yes

4

5 μA

0 V

5 V

±1.25/±2.75/2.5/5.5 V

Small Outline

SOP14,.25

Comparators

6 V

0.05 in (1.27 mm)

125 °C (257 °F)

80 nA

8 µs

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

0.341 in (8.65 mm)

MAX9024ASD

Maxim Integrated

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

0 V

8 mV

80 nA

Yes

4

20 μA

0 V

5 V

±1.25/±2.75/2.5/5.5 V

Small Outline

SOP14,.25

Comparators

6 V

0.05 in (1.27 mm)

125 °C (257 °F)

8 µs

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

0.341 in (8.65 mm)

MAX9024AUD-T

Maxim Integrated

Comparator

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

0 V

8 mV

80 nA

Yes

4

5 μA

0 V

5 V

±1.25/±2.75/2.5/5.5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

80 nA

8 µs

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G14

1

0.043 in (1.1 mm)

0.173 in (4.4 mm)

No

e0

0.197 in (5 mm)

MAX9024AUD

Maxim Integrated

Comparator

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

0 V

8 mV

80 nA

Yes

4

20 μA

0 V

5 V

±1.25/±2.75/2.5/5.5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

8 µs

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G14

1

0.043 in (1.1 mm)

0.173 in (4.4 mm)

No

e0

245 °C (473 °F)

0.197 in (5 mm)

MAX9119EXK-T

Maxim Integrated

Comparator

Industrial

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

0 V

10 mV

2 nA

Yes

1

1.2 μA

0 V

5 V

2/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

6 V

0.026 in (0.65 mm)

85 °C (185 °F)

1 nA

40 µs

Push-Pull

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e0

245 °C (473 °F)

0.079 in (2 mm)

MAX9120EXK-T

Maxim Integrated

Comparator

Industrial

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

0 V

10 mV

2 nA

Yes

1

1.2 μA

0 V

5 V

2/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

6 V

0.026 in (0.65 mm)

85 °C (185 °F)

1 nA

45 µs

Open-Drain

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e0

0.079 in (2 mm)

TS861AID

STMicroelectronics

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

10 mV

600 pA

Yes

1

BICMOS

5 V

2.7/10 V

Small Outline

SOP8,.25

Comparators

12 V

0.05 in (1.27 mm)

85 °C (185 °F)

300 pA

2 µs

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

0.193 in (4.9 mm)

TS861AIN

STMicroelectronics

Comparator

Industrial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

10 mV

600 pA

No

1

BICMOS

5 V

2.7/10 V

In-Line

DIP8,.3

Comparators

12 V

0.1 in (2.54 mm)

85 °C (185 °F)

300 pA

2 µs

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

R-PDIP-T8

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

e3

TS3022ID

STMicroelectronics

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

10 mV

300 nA

Yes

2

135 μA

2 V

1.8/5 V

Small Outline

SOP8,.25

Comparators

5.5 V

0.05 in (1.27 mm)

125 °C (257 °F)

160 nA

42 ns

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

0.193 in (4.9 mm)

TLC372CPSRG4

Texas Instruments

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

6.5 mV

600 pA

Yes

2

CMOS

300 μA

Tape And Reel

5 V

5 V

Small Outline

SOP8,.3

Comparators

18 V

0.05 in (1.27 mm)

70 °C (158 °F)

30 pA

650 ns

Open-Drain

0 °C (32 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e4

260 °C (500 °F)

0.244 in (6.2 mm)

TLV3402CDG4

Texas Instruments

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

4.4 mV

1.5 nA

Yes

2

1.28 μA

0 V

Tube

2.7 V

±1.25/±8/2.5/16 V

Small Outline

SOP8,.25

Comparators

17 V

0.05 in (1.27 mm)

70 °C (158 °F)

100 pA

175 µs

Open-Drain

0 °C (32 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.193 in (4.9 mm)

ADCMP370AKS-REEL7

Analog Devices

Comparator

Industrial

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

9 mV

50 nA

Yes

1

7 μA

Tape And Reel, 7 Inch

2.5/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

6 V

0.026 in (0.65 mm)

85 °C (185 °F)

5 µs

Open-Drain

-40 °C (-40 °F)

Tin Lead Over Silver

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e0

240 °C (464 °F)

0.079 in (2 mm)

ADCMP370AKS-REEL

Analog Devices

Comparator

Industrial

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

9 mV

50 nA

Yes

1

7 μA

Tape And Reel

2.5/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

6 V

0.026 in (0.65 mm)

85 °C (185 °F)

5 µs

Open-Drain

-40 °C (-40 °F)

Tin/Lead (Sn85Pb15) - with Silver barrier

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e0

0.079 in (2 mm)

ADCMP371AKS-REEL7

Analog Devices

Comparator

Industrial

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

9 mV

50 nA

Yes

1

7 μA

Tape And Reel, 7 Inch

2.5/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

6 V

0.026 in (0.65 mm)

85 °C (185 °F)

5 µs

Push-Pull

-40 °C (-40 °F)

Tin Lead Over Silver

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e0

0.079 in (2 mm)

ADCMP371AKS-REEL

Analog Devices

Comparator

Industrial

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

9 mV

50 nA

Yes

1

7 μA

Tape And Reel

2.5/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

6 V

0.026 in (0.65 mm)

85 °C (185 °F)

5 µs

Push-Pull

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e0

0.079 in (2 mm)

ADCMP371AKSZ-REEL7

Analog Devices

Comparator

Industrial

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

9 mV

50 nA

Yes

1

7 μA

Tape And Reel, 7 Inch

2.5/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

6 V

0.026 in (0.65 mm)

85 °C (185 °F)

5 µs

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e3

260 °C (500 °F)

0.079 in (2 mm)

ADCMP600BKSZ-RL

Analog Devices

Comparator

Automotive

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

5 mV

5 uA

Yes

1

BIPOLAR

Tape And Reel

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

5 uA

5 ns

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e3

260 °C (500 °F)

0.079 in (2 mm)

ADCMP600BRJZ-RL

Analog Devices

Comparator

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

5 mV

5 uA

Yes

1

BIPOLAR

Tape And Reel

3/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

6 V

0.037 in (0.95 mm)

125 °C (257 °F)

5 uA

5 ns

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e3

260 °C (500 °F)

0.114 in (2.9 mm)

ADCMP601BKSZ-RL

Analog Devices

Comparator

Automotive

Gull Wing

6

TSSOP

Rectangular

Plastic/Epoxy

5 mV

5 uA

Yes

1

BIPOLAR

Tape And Reel

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP6,.08

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

5 uA

5 ns

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G6

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e4

260 °C (500 °F)

0.079 in (2 mm)

MAX9961ALCCQ

Maxim Integrated

Comparator

Commercial

Gull Wing

100

HTFQFP

Square

Plastic/Epoxy

-7 V

20 mV

25 uA

Yes

2

BIPOLAR

-5.25 V

9.75 V

Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch

Comparators

11.5 V

0.02 in (0.5 mm)

70 °C (158 °F)

2.2 ns

Open-Collector

0 °C (32 °F)

Tin Lead

Quad

S-PQFP-G100

3

0.047 in (1.2 mm)

0.551 in (14 mm)

No

e0

0.551 in (14 mm)

MAX9961BDCCQ

Maxim Integrated

Comparator

Commercial

Gull Wing

100

HTFQFP

Square

Plastic/Epoxy

-7 V

100 mV

25 uA

Yes

2

BIPOLAR

-5.25 V

9.75 V

Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch

Comparators

11.5 V

0.02 in (0.5 mm)

70 °C (158 °F)

2.2 ns

Open-Collector

0 °C (32 °F)

Tin Lead

Quad

S-PQFP-G100

3

0.047 in (1.2 mm)

0.551 in (14 mm)

No

e0

0.551 in (14 mm)

ADCMP604BKSZ-RL

Analog Devices

Comparator

Automotive

Gull Wing

6

TSSOP

Rectangular

Plastic/Epoxy

5 mV

5 uA

Yes

1

21 mA

Tape And Reel

2.5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP6,.08

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

5 uA

3 ns

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G6

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e4

260 °C (500 °F)

0.079 in (2 mm)

ADCMP605BCPZ-R2

Analog Devices

Comparator

Automotive

No Lead

12

HVQCCN

Square

5 mV

5 uA

Yes

1

3 mA

Tape And Reel

2.5 V

3/5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC12,.12SQ,20

Comparators

6 V

0.02 in (0.5 mm)

125 °C (257 °F)

5 uA

3 ns

-40 °C (-40 °F)

Matte Tin

Quad

S-XQCC-N12

3

0.039 in (1 mm)

0.118 in (3 mm)

No

e3

260 °C (500 °F)

0.118 in (3 mm)

ADCMP605BCPZ-WP

Analog Devices

Comparator

Automotive

No Lead

12

HVQCCN

Square

5 mV

5 uA

Yes

1

3 mA

2.5 V

3/5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC12,.12SQ,20

Comparators

6 V

0.02 in (0.5 mm)

125 °C (257 °F)

5 uA

3 ns

-40 °C (-40 °F)

Matte Tin

Quad

S-XQCC-N12

3

0.039 in (1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

AP393NG-U

Diodes Incorporated

Comparator

Commercial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

5 mV

250 nA

No

1

CMOS

2.5 mA

5 V

5 V

In-Line

DIP8,.3

Comparators

36 V

0.1 in (2.54 mm)

70 °C (158 °F)

250 nA

1.3 µs

Open-Collector

0 °C (32 °F)

Matte Tin

Dual

R-PDIP-T8

1

0.21 in (5.33 mm)

0.3 in (7.62 mm)

No

e3

260 °C (500 °F)

0.365 in (9.275 mm)

AP393NL-U

Diodes Incorporated

Comparator

Commercial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

9 mV

400 nA

No

2

CMOS

2.5 mA

5 V

±1/±18/2/36 V

In-Line

DIP8,.3

Comparators

36 V

0.1 in (2.54 mm)

70 °C (158 °F)

250 nA

1.3 µs

Open-Collector

0 °C (32 °F)

Matte Tin

Dual

R-PDIP-T8

1

0.21 in (5.33 mm)

0.3 in (7.62 mm)

No

e3

260 °C (500 °F)

0.365 in (9.275 mm)

TLV3491AIDG4

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

15 mV

10 pA

Yes

1

CMOS

1.2 μA

Tube

5 V

2/5 V

Small Outline

SOP8,.25

Comparators

5.5 V

0.05 in (1.27 mm)

125 °C (257 °F)

10 pA

12 µs

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

2

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.193 in (4.9 mm)

MAX913EUA-T

Maxim Integrated

Comparator

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-7 V

3 mV

8 uA

Yes

1

BIPOLAR

10 mA

-5 V

5 V

5/±5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

7 V

0.026 in (0.65 mm)

85 °C (185 °F)

5 uA

10 ns

-40 °C (-40 °F)

Tin Lead

Dual

S-PDSO-G8

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e0

0.118 in (3 mm)

TLV3011AIDBVRG4

Texas Instruments

Comparator

Automotive

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

12 mV

10 pA

Yes

1

CMOS

5 μA

Tape And Reel

5 V

2/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP6,.11,37

Comparators

7 V

0.037 in (0.95 mm)

125 °C (257 °F)

10 pA

12 µs

Open-Drain

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G6

2

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

260 °C (500 °F)

0.114 in (2.9 mm)

ADCMP603BCPZ-R2

Analog Devices

Comparator

Automotive

No Lead

12

HVQCCN

Square

5 mV

5 uA

Yes

1

CMOS

Tape And Reel

3/5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC12,.12SQ,20

Comparators

5.5 V

0.02 in (0.5 mm)

125 °C (257 °F)

5 uA

5 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Quad

S-XQCC-N12

3

0.039 in (1 mm)

0.118 in (3 mm)

No

e3

260 °C (500 °F)

0.118 in (3 mm)

ADCMP603BCPZ-WP

Analog Devices

Comparator

Automotive

No Lead

12

HVQCCN

Square

5 mV

5 uA

Yes

1

CMOS

3/5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC12,.12SQ,20

Comparators

5.5 V

0.02 in (0.5 mm)

125 °C (257 °F)

5 uA

5 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Quad

S-XQCC-N12

3

0.039 in (1 mm)

0.118 in (3 mm)

No

e3

260 °C (500 °F)

0.118 in (3 mm)

ADCMP607BCPZ-R2

Analog Devices

Comparator

Automotive

No Lead

12

HVQCCN

Square

5 mV

5 uA

Yes

1

BIPOLAR

1.5 mA

Tape And Reel

2.5 V

3/5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC12,.12SQ,20

Comparators

6 V

0.02 in (0.5 mm)

125 °C (257 °F)

5 uA

2.1 ns

-40 °C (-40 °F)

Matte Tin

Quad

S-XQCC-N12

3

0.039 in (1 mm)

0.118 in (3 mm)

No

e3

260 °C (500 °F)

0.118 in (3 mm)

ADCMP607BCPZ-WP

Analog Devices

Comparator

Automotive

No Lead

12

HVQCCN

Square

5 mV

5 uA

Yes

1

BIPOLAR

1.5 mA

2.5 V

3/5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC12,.12SQ,20

Comparators

6 V

0.02 in (0.5 mm)

125 °C (257 °F)

5 uA

2.1 ns

-40 °C (-40 °F)

Matte Tin

Quad

S-XQCC-N12

3

0.039 in (1 mm)

0.118 in (3 mm)

No

e3

260 °C (500 °F)

0.118 in (3 mm)

LMV331IDCKTG4

Texas Instruments

Comparator

Automotive

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

9 mV

400 nA

Yes

1

BIPOLAR

120 μA

Tape And Reel

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

250 nA

600 ns

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e4

260 °C (500 °F)

0.079 in (2 mm)

LM239ADRG4

Texas Instruments

Comparator

Other

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

3 mV

400 nA

Yes

4

BIPOLAR

2 mA

Tape And Reel

5 V

5 V

Small Outline

SOP14,.24

Comparators

36 V

0.05 in (1.27 mm)

85 °C (185 °F)

250 nA

1.3 µs

Open-Collector

-25 °C (-13 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.341 in (8.65 mm)

LP211DRG4

Texas Instruments

Comparator

Other

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

7.5 mV

150 nA

Yes

1

300 μA

-15 V

Tape And Reel

15 V

±15 V

Small Outline

SOP8,.25

Comparators

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

100 nA

1.2 µs

Open-Collector

-25 °C (-13 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

TL712CDG4

Texas Instruments

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

5 mV

600 uA

Yes

1

BIPOLAR

20 mA

Tube

5 V

5 V

Small Outline

SOP8,.25

Comparators

7 V

0.05 in (1.27 mm)

70 °C (158 °F)

600 uA

25 ns

Push-Pull

0 °C (32 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

TLV3702CDGKG4

Texas Instruments

Comparator

Commercial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

0 V

7 mV

1.5 nA

Yes

2

CMOS

1.6 μA

0 V

Tube

2.7 V

±1.25/±8/2.5/16 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

17 V

0.026 in (0.65 mm)

70 °C (158 °F)

100 pA

240 µs

Push-Pull

0 °C (32 °F)

Nickel Palladium Gold

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

INA209AIPW

Texas Instruments

Comparator

Automotive

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

5.5 kHz

100 uV

Yes

1

120 dB

1.5 mA

Tube

3.3 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

26 V

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G16

2

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

TLC372MDRG4

Texas Instruments

Comparator

Military

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

10 mV

20 nA

Yes

2

CMOS

MIL-STD-883

300 μA

Tape And Reel

5 V

5 V

Small Outline

SOP8,.25

Comparators

18 V

0.05 in (1.27 mm)

125 °C (257 °F)

30 pA

650 ns

Open-Collector

-55 °C (-67 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.