Gull Wing Comparators 690

Reset All
Part RoHS Manufacturer Amplifier Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material Nominal Unity Gain Bandwidth Maximum Negative Supply Voltage Limit Maximum Input Offset Voltage Maximum Average Bias Current (IIB) Surface Mount No. of Functions Minimum Common Mode Reject Ratio Technology Screening Level Nominal Common Mode Reject Ratio Maximum Supply Current Nominal Negative Supply Voltage (Vsup) Minimum Isolation Voltage Packing Method Nominal Supply Voltage / Vsup (V) Power Supplies (V) Package Style (Meter) Package Equivalence Code Sub-Category Nominal Slow Rate Maximum Supply Voltage Limit Terminal Pitch Maximum Operating Temperature Maximum Bias Current (IIB) @25C Maximum Common Mode Voltage Nominal Response Time Output Type Minimum Operating Temperature Terminal Finish Terminal Position JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Nominal Bandwidth (3dB) JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length

MAX9053AEUB

Maxim Integrated

Comparator

Industrial

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

7 mV

10 nA

Yes

2

5 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

6 V

0.02 in (0.5 mm)

85 °C (185 °F)

450 ns

Push-Pull

-40 °C (-40 °F)

Tin Lead

Dual

S-PDSO-G10

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e0

245 °C (473 °F)

0.118 in (3 mm)

MAX9053BEUB

Maxim Integrated

Comparator

Industrial

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

9 mV

25 nA

Yes

2

5 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

6 V

0.02 in (0.5 mm)

85 °C (185 °F)

450 ns

Push-Pull

-40 °C (-40 °F)

Tin Lead

Dual

S-PDSO-G10

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e0

0.118 in (3 mm)

LM2903QDR

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

15 mV

-500 nA

Yes

2

BIPOLAR

2.5 mA

5 V

5/30 V

Small Outline

SOP8,.25

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

MAX9075EUK-T

Maxim Integrated

Comparator

Industrial

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

8 mV

-20 nA

Yes

1

6.6 μA

5 V

2.1/5.5 V

Small Outline, Low Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

6 V

0.037 in (0.95 mm)

85 °C (185 °F)

20 nA

580 ns

Push-Pull

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.064 in (1.625 mm)

No

e0

40

260 °C (500 °F)

0.114 in (2.9 mm)

MAX9075EXK-T

Maxim Integrated

Comparator

Industrial

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

8 mV

-20 nA

Yes

1

6.6 μA

5 V

2.1/5.5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

6 V

0.026 in (0.65 mm)

85 °C (185 °F)

20 nA

580 ns

Push-Pull

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e0

245 °C (473 °F)

0.079 in (2 mm)

MAX9077ESA

Maxim Integrated

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

8 mV

-20 nA

Yes

2

6.6 μA

5 V

2.1/5.5 V

Small Outline

SOP8,.25

Comparators

6 V

0.05 in (1.27 mm)

85 °C (185 °F)

20 nA

580 ns

Push-Pull

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

40

260 °C (500 °F)

0.193 in (4.9 mm)

TL3116IPWR

Texas Instruments

Comparator

Industrial

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

-7 V

3 mV

1.5 uA

Yes

1

BIPOLAR

14.7 mA

-5 V

Tape And Reel

5 V

5/±5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.25

Comparators

7 V

0.026 in (0.65 mm)

85 °C (185 °F)

1.1 uA

9.9 ns

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.047 in (1.2 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.173 in (4.4 mm)

TS861ID

STMicroelectronics

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

18 mV

600 pA

Yes

1

BICMOS

16 μA

5 V

2.7/10 V

Small Outline

SOP8,.25

Comparators

12 V

0.05 in (1.27 mm)

85 °C (185 °F)

2 µs

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

0.193 in (4.9 mm)

TLC3702CPSR

Texas Instruments

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

6.5 mV

600 pA

Yes

2

CMOS

40 μA

Tape And Reel

5 V

5 V

Small Outline

SOP8,.3

Comparators

18 V

0.05 in (1.27 mm)

70 °C (158 °F)

30 pA

2.7 µs

Push-Pull

0 °C (32 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e4

260 °C (500 °F)

0.244 in (6.2 mm)

TLC3702CPS

Texas Instruments

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

6.5 mV

600 pA

Yes

2

CMOS

40 μA

5 V

Small Outline

Comparators

18 V

0.05 in (1.27 mm)

70 °C (158 °F)

30 pA

2.7 µs

Push-Pull

0 °C (32 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e4

260 °C (500 °F)

0.244 in (6.2 mm)

TLC3702IPW

Texas Instruments

Comparator

Industrial

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

7 mV

2 nA

Yes

2

CMOS

40 μA

Tube

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.25

Comparators

18 V

0.026 in (0.65 mm)

85 °C (185 °F)

30 pA

2.7 µs

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.047 in (1.2 mm)

0.118 in (3 mm)

No

e4

260 °C (500 °F)

0.173 in (4.4 mm)

LM2903PS

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

15 mV

-500 nA

Yes

2

BIPOLAR

2.5 mA

0 V

5 V

5 V

Small Outline

SOP8,.3

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e4

30 s

260 °C (500 °F)

0.244 in (6.2 mm)

LM393APS

Texas Instruments

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

4 mV

-400 nA

Yes

2

BIPOLAR

2.5 mA

0 V

5 V

5 V

Small Outline

SOP8,.3

Comparators

36 V

0.05 in (1.27 mm)

70 °C (158 °F)

250 nA

1.3 µs

Open-Collector

0 °C (32 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e4

30 s

260 °C (500 °F)

0.244 in (6.2 mm)

TLC3704CNS

Texas Instruments

Comparator

Commercial

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

6.5 mV

600 pA

Yes

4

CMOS

5 V

Small Outline

Comparators

18 V

0.05 in (1.27 mm)

70 °C (158 °F)

2.7 µs

Push-Pull

0 °C (32 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

1

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e4

30 s

260 °C (500 °F)

0.402 in (10.2 mm)

TLC3704IPW

Texas Instruments

Comparator

Industrial

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

-18 V

7 mV

2 nA

Yes

4

CMOS

80 μA

Tube

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

18 V

0.026 in (0.65 mm)

85 °C (185 °F)

30 pA

2.7 µs

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G14

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

260 °C (500 °F)

0.197 in (5 mm)

AD8612ARU

Analog Devices

Comparator

Industrial

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

0 V

7 mV

-4 uA

Yes

1

10 mA

0 V

3 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

7 V

0.026 in (0.65 mm)

85 °C (185 °F)

4.5 ns

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G14

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e0

240 °C (464 °F)

0.197 in (5 mm)

MAX923CSA-T

Maxim Integrated

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-0.3 V

10 mV

Yes

2

CMOS

6 μA

3 V

±1.25/±5.5/2.5/11 V

Small Outline

SOP8,.25

Comparators

12 V

0.05 in (1.27 mm)

70 °C (158 °F)

14 µs

0 °C (32 °F)

Tin Lead

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

0.193 in (4.9 mm)

MAX996ESD-T

Maxim Integrated

Comparator

Industrial

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

0 V

7 mV

10 nA

Yes

4

96 μA

0 V

2.7 V

±1.5/±2.5/3/5 V

Small Outline

SOP14,.25

Comparators

6 V

0.05 in (1.27 mm)

85 °C (185 °F)

10 nA

210 ns

Open-Drain

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

0.341 in (8.65 mm)

MC3302DR2

Onsemi

Comparator

Industrial

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

0 V

40 mV

1 uA

Yes

4

BIPOLAR

2.5 mA

0 V

5 V

5 V

Small Outline

SOP14,.25

Comparators

30 V

0.05 in (1.27 mm)

85 °C (185 °F)

500 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

235 °C (455 °F)

0.341 in (8.65 mm)

TLC339CNS

Texas Instruments

Comparator

Commercial

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

6.5 mV

600 pA

Yes

4

CMOS

5 V

Small Outline

Comparators

18 V

0.05 in (1.27 mm)

70 °C (158 °F)

2.5 µs

Open-Drain

0 °C (32 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

1

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e4

30 s

260 °C (500 °F)

0.402 in (10.2 mm)

TLC374CPWR

Texas Instruments

Comparator

Commercial

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

6.5 mV

600 pA

Yes

4

CMOS

600 μA

Tape And Reel

5 V

5/10 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

18 V

0.026 in (0.65 mm)

70 °C (158 °F)

30 pA

650 ns

Open-Collector

0 °C (32 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G14

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

260 °C (500 °F)

0.197 in (5 mm)

TL3016CPWR

Texas Instruments

Comparator

Commercial

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

-7 V

3 mV

10 uA

Yes

1

BIPOLAR

12.5 mA

-5 V

Tape And Reel

5 V

±5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.25

Comparators

7 V

0.026 in (0.65 mm)

70 °C (158 °F)

10 uA

7.8 µs

0 °C (32 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.047 in (1.2 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.173 in (4.4 mm)

TL712CPSR

Texas Instruments

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

5 mV

600 uA

Yes

1

BIPOLAR

20 mA

Tape And Reel

5 V

5 V

Small Outline

SOP8,.3

Comparators

7 V

0.05 in (1.27 mm)

70 °C (158 °F)

600 uA

25 ns

Push-Pull

0 °C (32 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e4

30 s

260 °C (500 °F)

0.244 in (6.2 mm)

TLV3401CDBVR

Texas Instruments

Comparator

Commercial

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

0 V

4.4 mV

1.5 nA

Yes

1

640 nA

0 V

Tape And Reel

2.7 V

±1.25/±8/2.5/16 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

17 V

0.037 in (0.95 mm)

70 °C (158 °F)

100 pA

175 µs

Open-Drain

0 °C (32 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

260 °C (500 °F)

0.114 in (2.9 mm)

TLV3401CD

Texas Instruments

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

4.4 mV

1.5 nA

Yes

1

640 nA

0 V

Tube

2.7 V

±1.25/±8/2.5/16 V

Small Outline

SOP8,.25

Comparators

17 V

0.05 in (1.27 mm)

70 °C (158 °F)

100 pA

175 µs

Open-Drain

0 °C (32 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.193 in (4.9 mm)

TLV3401ID

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

4.4 mV

1.5 nA

Yes

1

640 nA

0 V

Tube

5 V

±1.35/±8/2.7/16 V

Small Outline

SOP8,.25

Comparators

17 V

0.05 in (1.27 mm)

125 °C (257 °F)

100 pA

175 µs

Open-Drain

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.193 in (4.9 mm)

TLV3402CD

Texas Instruments

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

4.4 mV

1.5 nA

Yes

2

1.28 μA

0 V

Tube

2.7 V

±1.25/±8/2.5/16 V

Small Outline

SOP8,.25

Comparators

17 V

0.05 in (1.27 mm)

70 °C (158 °F)

100 pA

175 µs

Open-Drain

0 °C (32 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.193 in (4.9 mm)

TLV3404CDR

Texas Instruments

Comparator

Commercial

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

0 V

4.4 mV

1.5 nA

Yes

4

2.56 μA

0 V

Tape And Reel

2.7 V

±1.25/±8/2.5/16 V

Small Outline

SOP14,.25

Comparators

17 V

0.05 in (1.27 mm)

70 °C (158 °F)

100 pA

175 µs

Open-Drain

0 °C (32 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.341 in (8.65 mm)

TLV3404CPW

Texas Instruments

Comparator

Commercial

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

0 V

4.4 mV

1.5 nA

Yes

4

2.56 μA

0 V

Tube

2.7 V

±1.25/±8/2.5/16 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

17 V

0.026 in (0.65 mm)

70 °C (158 °F)

100 pA

175 µs

Open-Drain

0 °C (32 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G14

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

260 °C (500 °F)

0.197 in (5 mm)

TLV3404ID

Texas Instruments

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

0 V

4.4 mV

1.5 nA

Yes

4

2.56 μA

0 V

Tube

5 V

±1.35/±8/2.7/16 V

Small Outline

SOP14,.25

Comparators

17 V

0.05 in (1.27 mm)

125 °C (257 °F)

100 pA

175 µs

Open-Drain

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.341 in (8.65 mm)

MAX992EUA-T

Maxim Integrated

Comparator

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

0 V

7 mV

10 nA

Yes

2

CMOS

192 μA

0 V

2.7 V

±1.5/±2.5/3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

6 V

0.026 in (0.65 mm)

85 °C (185 °F)

10 nA

210 ns

Open-Drain

-40 °C (-40 °F)

Tin Lead

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e0

245 °C (473 °F)

0.118 in (3 mm)

LM2901AS14-13

Diodes Incorporated

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

15 mV

500 nA

Yes

4

5 V

Small Outline

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

1.3 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G14

0.068 in (1.73 mm)

0.153 in (3.895 mm)

e3

260 °C (500 °F)

0.34 in (8.635 mm)

MAX9030AUT-T

Maxim Integrated

Comparator

Automotive

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

0 V

5 mV

80 nA

Yes

1

55 μA

0 V

5 V

3/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP6,.11,37

Comparators

6 V

0.037 in (0.95 mm)

125 °C (257 °F)

80 nA

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G6

1

0.057 in (1.45 mm)

0.064 in (1.625 mm)

No

e4

0.114 in (2.9 mm)

MAX9031AUK-T

Maxim Integrated

Comparator

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

0 V

5 mV

80 nA

Yes

1

55 μA

0 V

5 V

3/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

6 V

0.037 in (0.95 mm)

125 °C (257 °F)

80 nA

Push-Pull

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.064 in (1.625 mm)

No

e0

245 °C (473 °F)

0.114 in (2.9 mm)

MAX9032AKA-T

Maxim Integrated

Comparator

Automotive

Gull Wing

8

LSSOP

Rectangular

Plastic/Epoxy

0 V

5 mV

80 nA

Yes

2

110 μA

0 V

5 V

3/5 V

Small Outline, Low Profile, Shrink Pitch

TSSOP8,.1

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

80 nA

Push-Pull

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

1

0.057 in (1.45 mm)

0.064 in (1.625 mm)

No

e0

0.114 in (2.9 mm)

MAX9032ASA

Maxim Integrated

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

5 mV

80 nA

Yes

2

110 μA

0 V

5 V

3/5 V

Small Outline

SOP8,.25

Comparators

6 V

0.05 in (1.27 mm)

125 °C (257 °F)

80 nA

Push-Pull

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

0.193 in (4.9 mm)

MAX9032AUA

Maxim Integrated

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

0 V

5 mV

80 nA

Yes

2

110 μA

0 V

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

80 nA

Push-Pull

-40 °C (-40 °F)

Tin Lead

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e0

0.118 in (3 mm)

MAX9034ASD

Maxim Integrated

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

0 V

5 mV

80 nA

Yes

4

220 μA

0 V

5 V

3/5 V

Small Outline

SOP14,.25

Comparators

6 V

0.05 in (1.27 mm)

125 °C (257 °F)

80 nA

Push-Pull

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

0.341 in (8.65 mm)

MAX9034AUD

Maxim Integrated

Comparator

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

0 V

5 mV

80 nA

Yes

4

220 μA

0 V

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

80 nA

Push-Pull

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G14

1

0.043 in (1.1 mm)

0.173 in (4.4 mm)

No

e0

245 °C (473 °F)

0.197 in (5 mm)

MAX9100EUK-T

Maxim Integrated

Comparator

Industrial

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

20 mV

30 nA

Yes

1

BICMOS

13 μA

5 V

1/5.5 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

6 V

0.037 in (0.95 mm)

85 °C (185 °F)

15 nA

Push-Pull

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.064 in (1.625 mm)

No

e0

245 °C (473 °F)

0.114 in (2.9 mm)

MAX9101ESA

Maxim Integrated

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

20 mV

30 nA

Yes

1

BICMOS

13 μA

5 V

1/5.5 V

Small Outline

SOP8,.25

Comparators

6 V

0.05 in (1.27 mm)

85 °C (185 °F)

15 nA

Open-Drain

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

0.193 in (4.9 mm)

MAX9101EUK-T

Maxim Integrated

Comparator

Industrial

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

20 mV

30 nA

Yes

1

BICMOS

13 μA

5 V

1/5.5 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

6 V

0.037 in (0.95 mm)

85 °C (185 °F)

15 nA

Open-Drain

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.064 in (1.625 mm)

No

e0

0.114 in (2.9 mm)

MAX9691ESA

Maxim Integrated

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-6 V

11.5 mV

30 uA

Yes

1

36 mA

-5.2 V

5 V

5,-5.2 V

Small Outline

SOP8,.25

Comparators

6 V

0.05 in (1.27 mm)

85 °C (185 °F)

20 uA

2 ns

Open-Emitter

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

0.193 in (4.9 mm)

MAX9691EUA

Maxim Integrated

Comparator

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-6 V

11.5 mV

30 uA

Yes

1

36 mA

-5.2 V

5 V

5,-5.2 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

6 V

0.026 in (0.65 mm)

85 °C (185 °F)

20 uA

2 ns

Open-Emitter

-40 °C (-40 °F)

Tin Lead

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e0

245 °C (473 °F)

0.118 in (3 mm)

MAX9692ESE

Maxim Integrated

Comparator

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-6 V

11.5 mV

30 uA

Yes

1

36 mA

-5.2 V

5 V

5,-5.2 V

Small Outline

SOP16,.25

Comparators

6 V

0.05 in (1.27 mm)

85 °C (185 °F)

20 uA

2 ns

Open-Emitter

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

0.39 in (9.9 mm)

MAX9693EEE

Maxim Integrated

Comparator

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-6 V

11.5 mV

30 uA

Yes

2

50 mA

-5.2 V

5 V

5,-5.2 V

Small Outline

SSOP16,.25

Comparators

6 V

0.05 in (1.27 mm)

85 °C (185 °F)

20 uA

2 ns

Open-Emitter

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

0.39 in (9.9 mm)

TL3116IPW

Texas Instruments

Comparator

Industrial

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

-7 V

3 mV

1.5 uA

Yes

1

BIPOLAR

14.7 mA

-5 V

Tube

5 V

5/±5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.25

Comparators

7 V

0.026 in (0.65 mm)

85 °C (185 °F)

1.1 uA

9.9 ns

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.047 in (1.2 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.173 in (4.4 mm)

AD8561AR-REEL

Analog Devices

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-7 V

8 mV

Yes

1

BIPOLAR

-5 V

Tape And Reel

5 V

3/5/±5 V

Small Outline

SOP8,.45

Comparators

7 V

0.05 in (1.27 mm)

85 °C (185 °F)

7 ns

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

240 °C (464 °F)

0.193 in (4.9 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.