INDUSTRIAL Line Drivers & Receivers 1,832

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Nominal Output Peak Current Limit	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
ADS58C28IRGCT	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.9 V	2		CMOS		GENERAL PURPOSE	163 mA	DIFFERENTIAL	1.8 V	1.9 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.75 V		.00001 Amp	1.7 V	.5 mm	85 Cel	1.8 V		-40 Cel		NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N64	3	1 mm		9 mm	Not Qualified		TRUE	2			e4	30	260	9 mm		0 ns
DIX9211PT	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1				GENERAL PURPOSE	38 mA	SCHMITT TRIGGER	3.3 V	3.6 V			FLATPACK, LOW PROFILE, FINE PITCH		2.9 V			2.9 V	.5 mm	85 Cel	3.3 V		-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G48	1	1.6 mm		7 mm	Not Qualified			1		NO	e4	30	260	7 mm		0 ns
ADA4960-1ACPZ-R2	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	5.25 V	1				GENERAL PURPOSE		DIFFERENTIAL	5 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					4.75 V	.5 mm	85 Cel			-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N16	3	.8 mm		3 mm	Not Qualified					YES	e3	30	260	3 mm		0 ns
ADA4960-1ACPZ-RL	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	5.25 V	1				GENERAL PURPOSE		DIFFERENTIAL	5 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					4.75 V	.5 mm	85 Cel			-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N16	3	.8 mm		3 mm	Not Qualified					YES	e3	30	260	3 mm		0 ns
ADV7612BSWZ-P	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	100	HLFQFP	SQUARE	PLASTIC/EPOXY	YES	1.89 V	1		CMOS		I2C		STANDARD	1.8 V	3.46 V			FLATPACK, HEAT SINK/SLUG, LOW PROFILE, FINE PITCH		3.14 V			1.71 V	.5 mm	85 Cel	3.3 V		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQFP-G100	3	1.6 mm		14 mm	Not Qualified			1		NO	e3	30	260	14 mm		300 ns
MRF89XA-I/MQ	Microchip Technology	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1						SCHMITT TRIGGER	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					2.1 V	.5 mm	85 Cel			-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N32		.8 mm		5 mm	Not Qualified			1		NO	e3			5 mm
TSB81BA3EIPFP	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES		3		CMOS			150 mA			3.6 V	1.8,3.3		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ	3 V	Line Driver or Receivers			.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	6	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G80	3	1.2 mm		12 mm	Not Qualified	4 Amp	COMPLEMENTARY	6		YES	e4	30	260	12 mm	.172 V	0 ns
THS6043IPWP	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	14	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	2	2	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	12 V	15 V		-12 V	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH		5 V			5 V	.65 mm	85 Cel	12 V		-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	2	1.2 mm	.35 A	4.4 mm	Not Qualified				ALSO OPERATES AT 10V TO 30V SINGLE SUPPLY	NO	e4	NOT SPECIFIED	260	5 mm		0 ns
THS6052IDDA	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	HLSOP	RECTANGULAR	PLASTIC/EPOXY	YES	16.5 V	2	2	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	12 V	15 V	+-5/+-15	-12 V	SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE	SOP8,.25	5 V	Line Driver or Receivers		4.5 V	1.27 mm	85 Cel	12 V		-40 Cel	2	Matte Tin (Sn)	DUAL	R-PDSO-G8	1	1.68 mm	.175 A	3.9 mm	Not Qualified				ALSO OPERATES AT 9V TO 33V SINGLE SUPPLY	NO	e3	NOT SPECIFIED	260	4.89 mm		0 ns
MC100EP16VTDT	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		ECL	.35 ns	GENERAL PURPOSE	48 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.1 mm		3 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0		235	3 mm		.35 ns
MC100EL16DTR2	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.7 V	1		ECL		GENERAL PURPOSE	26 mA	DIFFERENTIAL	5 V		-4.5	-4.5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers		4.2 V	.65 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	S-PDSO-G8		1.1 mm		3 mm	Not Qualified			1	NECL MODE: VCC=0 VEE=-4.2 TO -5.7	YES	e0		235	3 mm		.325 ns
MC100EL16DT	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.7 V	1		ECL		GENERAL PURPOSE	26 mA	DIFFERENTIAL	5 V		-4.5	-4.5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers		4.2 V	.65 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	S-PDSO-G8		1.1 mm		3 mm	Not Qualified			1	NECL MODE: VCC=0 VEE=-4.2 TO -5.7	YES	e0		235	3 mm		.325 ns
MC100EP16VADT	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		ECL	.34 ns	GENERAL PURPOSE	40 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers	.00015 Amp	3 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8		1.1 mm		3 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0		235	3 mm		.34 ns
MC100EP16VBD	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		ECL	.4 ns	GENERAL PURPOSE	38 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00015 Amp	3 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0		235	4.9 mm		.4 ns
MC100EP16VCDTR2	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1		ECL	.4 ns	GENERAL PURPOSE	38 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers	.00015 Amp	3 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	S-PDSO-G8	1	1.1 mm		3 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0		235	3 mm		.4 ns
MC100EP16VCDT	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1		ECL	.4 ns	GENERAL PURPOSE	38 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers	.00015 Amp	3 V	.65 mm	85 Cel			-40 Cel	1	Tin/Lead (Sn90Pb10)	DUAL	S-PDSO-G8		1.1 mm		3 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0	30	235	3 mm		.4 ns
MC100EP16VCD	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		ECL	.4 ns	GENERAL PURPOSE	38 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00015 Amp	3 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0		235	4.9 mm		.4 ns
MC10EL16DTR2	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.7 V	1		ECL		GENERAL PURPOSE	22 mA	DIFFERENTIAL	5 V		-5.2	-5.2 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers		4.2 V	.65 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	S-PDSO-G8		1.1 mm		3 mm	Not Qualified			1	NECL MODE: VCC=0 VEE=-4.2 TO -5.7	YES	e0		235	3 mm		.325 ns
MC10EL16DT	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.7 V	1		ECL		GENERAL PURPOSE	22 mA	DIFFERENTIAL	5 V		-5.2	-5.2 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers		4.2 V	.65 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	S-PDSO-G8		1.1 mm		3 mm	Not Qualified			1	NECL MODE: VCC=0 VEE=-4.2 TO -5.7	YES	e0		235	3 mm		.325 ns
MC10EP16TDT	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1		ECL	.3 ns	GENERAL PURPOSE	31 mA	DIFFERENTIAL	3.3 V		-5.2	-5.2 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	S-PDSO-G8		1.1 mm		3 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0		235	3 mm		.3 ns
MC10EP16VADTR2	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		ECL	.34 ns	GENERAL PURPOSE	40 mA	DIFFERENTIAL	3.3 V		-5.2	-5.2 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers	.00015 Amp	3 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.1 mm		3 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0		235	3 mm		.34 ns
ADM2209EARU-REEL7	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	38	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	13.2 V	6		CMOS	1500 ns	EIA-232-E; TIA-232-E; V.28	2 mA	SCHMITT TRIGGER	12 V		12		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP38,.25,20		Line Driver or Receivers	.000025 Amp	10.8 V	.5 mm	85 Cel			-40 Cel	6	TIN LEAD	DUAL	R-PDSO-G38	1	1.1 mm		4.4 mm	Not Qualified	1.6 Amp		10	3 TO 5V STANDBY SUPPLY	NO	e0		240	9.7 mm	10 V	2000 ns
SN65LBC182D	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BICMOS	1300 ns	EIA-485-A; TIA-485-A; ISO 8482	30 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP8,.25	4.75 V	Line Driver or Receivers	.00005 Amp	4.75 V	1.27 mm	85 Cel	5 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	.05 Amp	COMPLEMENTARY	1		YES	e4	30	260	4.9 mm	1.5 V	150 ns
SN65LBC182P	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1		BICMOS	1300 ns	EIA-485-A; TIA-485-A; ISO 8482	30 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		IN-LINE	DIP8,.3	4.75 V	Line Driver or Receivers	.00005 Amp	4.75 V	2.54 mm	85 Cel	5 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T8		5.08 mm		7.62 mm	Not Qualified	.05 Amp	COMPLEMENTARY	1		YES	e4			9.81 mm	1.5 V	150 ns
SN65LVDS22PW	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2			6 ns	EIA-644; TIA-644		DIFFERENTIAL	3.3 V	3.6 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V		.00001 Amp	3 V	.65 mm	85 Cel	3.3 V		-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm		4.4 mm	Not Qualified			2		YES	e4	30	260	5 mm		6 ns
SN65LVDS32PW	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS		EIA-644; TIA-644	18 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	.65 mm	85 Cel	3.3 V		-40 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.2 mm		4.4 mm	Not Qualified	8 Amp		4		NO	e4	NOT SPECIFIED	260	5 mm		3 ns
SN65LVDS9638DGK	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2		CMOS	2.5 ns	EIA-644; TIA-644	35 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	3 V	Line Driver or Receivers	.00002 Amp	3 V	.65 mm	85 Cel	3.3 V	3-STATE	-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	S-PDSO-G8	1	1.1 mm		3 mm	Not Qualified		COMPLEMENTARY			YES	e4	NOT SPECIFIED	260	3 mm	.247 V	0 ns
SN65LVDT9637BDR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		BICMOS		EIA-644; TIA-644	12 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers		3 V	1.27 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	.01 Amp	TRUE	2		NO	e4	30	260	4.9 mm		6 ns
SN65LVDS9637DGK	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2		CMOS		EIA-644; TIA-644	18 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	3 V	Line Driver or Receivers	.00001 Amp	3 V	.65 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	S-PDSO-G8	1	1.1 mm		3 mm	Not Qualified	8 Amp	TRUE	2		NO	e4	NOT SPECIFIED	260	3 mm		3 ns
MAX9122ESE	Maxim Integrated	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS		EIA-644; TIA-644	15 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified	4 Amp		4			e0			9.9 mm		2.7 ns
MAX3221EEAE-T	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		BICMOS		EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP16,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G16	1	1.99 mm		5.29 mm	Not Qualified	1.6 Amp		1		NO	e0		245	6.2 mm	10 V	0 ns
MAX9115EXK-T	Maxim Integrated	LINE RECEIVER	INDUSTRIAL	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS		EIA-644; TIA-644	7 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G5	1	1.1 mm		1.25 mm	Not Qualified	8 Amp		1			e0			2 mm		3 ns
SN65LVDS180PW	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		BIPOLAR	2.7 ns	EIA-644; TIA-644	12 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	.65 mm	85 Cel	3.3 V		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.2 mm		4.4 mm	Not Qualified	.02 Amp		1		YES	e4	30	260	5 mm	.247 V	4.5 ns
MAX3229EBV	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	BALL	30	VFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		CMOS		EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3/5		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA30,5X6,20		Line Driver or Receivers		2.5 V	.5 mm	85 Cel			-40 Cel	1	TIN LEAD	BOTTOM	R-PBGA-B30	1	.69 mm		2.52 mm	Not Qualified	.8 Amp		1		NO	e0			3.03 mm	7.4 V	0 ns
MAX3042BESE	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		CMOS	1500 ns	EIA-422; EIA-485		STANDARD	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		4.75 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified					YES	e0			9.9 mm	1.5 V	0 ns
MAX3043ESE	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		CMOS	1500 ns	EIA-422; EIA-485		STANDARD	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		4.75 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified					YES	e0			9.9 mm	1.5 V	0 ns
MAX3044EUE	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		CMOS	1500 ns	EIA-422; EIA-485		STANDARD	5 V		5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers		4.75 V	.65 mm	85 Cel		3-STATE	-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G16	1	1.1 mm		4.4 mm	Not Qualified					YES	e0			5 mm	1.5 V	0 ns
MAX3045BESE	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		CMOS	1500 ns	EIA-422; EIA-485		STANDARD	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		4.75 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified					YES	e0			9.9 mm	1.5 V	0 ns
MAX9129EGE	Maxim Integrated	LINE DRIVER	INDUSTRIAL	NO LEAD	16	VQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	4		CMOS	3 ns	GENERAL PURPOSE		STANDARD	3.3 V				CHIP CARRIER, VERY THIN PROFILE					3 V	.65 mm	85 Cel			-40 Cel	4	TIN LEAD	QUAD	S-PQCC-N16	1	1 mm		4 mm	Not Qualified					YES	e0			4 mm		0 ns
MAX9129EUE	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS	3 ns	GENERAL PURPOSE		STANDARD	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G16	1	1.1 mm		4.4 mm	Not Qualified					YES	e0			5 mm		0 ns
MAX9321EKA-T	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.8 V	1		BIPOLAR		GENERAL PURPOSE	24 mA	DIFFERENTIAL	3.3 V		+-2.25/+-3.8		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSSOP8,.1		Line Driver or Receivers		2.25 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.45 mm		1.625 mm	Not Qualified			1	CAN OPERATE WITH A -2.25V TO -3.8V SUPPLY IN LVECL MODE	YES	e0			2.9 mm		0 ns
SN65LVDS2D	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		TTL	3.1 ns	EIA-644-A; TIA-644-A	8 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	2.5/3.3		SMALL OUTLINE	SOP8,.25	2.4 V	Line Driver or Receivers		2.4 V	1.27 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	.02 Amp	TRUE	1		NO	e4	NOT SPECIFIED	260	4.9 mm	2 V	3.6 ns
ST202BN	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	2			3500 ns	EIA-232; TIA-232; V.28	4 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers		4.5 V	2.54 mm	85 Cel			-40 Cel	2	MATTE TIN	DUAL	R-PDIP-T16		5.1 mm		7.62 mm	Not Qualified	3.2 Amp		2		NO	e3				10 V	500 ns
ST3232BN	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	2		BIPOLAR		EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		IN-LINE	DIP16,.3		Line Driver or Receivers		3 V	2.54 mm	85 Cel			-40 Cel	2	MATTE TIN	DUAL	R-PDIP-T16		5.1 mm		7.62 mm	Not Qualified	1.6 Amp		2		NO	e3				5 V	0 ns
ST3232BWR	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2		CMOS		EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	3	2.65 mm		7.5 mm	Not Qualified	1.6 Amp		2		NO	e4	30	260	10.3 mm	5 V	0 ns
ST3237BPR	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3				EIA-232; TIA-232; V.24; V.28	2 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	5	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28		2 mm		5.3 mm	Not Qualified	1.6 Amp		3		NO	e4			10.2 mm	10 V	0 ns
ST3243BTR	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3				EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28		1.2 mm		4.4 mm	Not Qualified	1.6 Amp		5		NO	e4		260	9.7 mm	10 V	0 ns
ST485BD	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1			60 ns	EIA-422; EIA-485	.9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		4.75 V	1.27 mm	85 Cel			-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	4 Amp		1		YES	e4			4.9 mm	1.5 V	210 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.