INDUSTRIAL Line Drivers & Receivers 1,832

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
MAX3241EEWI-T	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	BICMOS		EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE	SOP28,.4		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	3	TIN LEAD	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp		5		NO	e0			17.9 mm	10 V	0 ns
ST3384EBDR	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	18	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2			EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE	SOP18,.4		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G18		2.65 mm	7.5 mm	Not Qualified	2 Amp		2		NO	e4			11.55 mm	5 V	0 ns
ST485ERBN	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1		60 ns	EIA-422; EIA-485	.9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers		4.75 V	2.54 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDIP-T8	1	4.8 mm	7.62 mm	Not Qualified	4 Amp		1		YES	e3	30	260		1.5 V	210 ns
ST490ABN	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1		16 ns	EIA-422; EIA-485	5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers		4.5 V	2.54 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDIP-T8		4.8 mm	7.62 mm	Not Qualified	8 Amp		1		YES	e3				1.5 V	30 ns
FIN1027AM	Fairchild Semiconductor	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		1.5 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified					YES	e3			4.9 mm	.25 V	0 ns
SN65C3223PW	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2	BIPOLAR		EIA-232	1 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	3 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel	3.3 V		-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G20	1	1.2 mm	4.4 mm	Not Qualified	1.6 Amp	INVERTED	2	ALSO OPERATES AT 5V SUPPLY	NO	e4	NOT SPECIFIED	260	6.5 mm	10 V	0 ns
SN65LVDT101DGKR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	BIPOLAR	.9 ns	EIA-644-A; TIA-644-A	61 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	3 V	Line Driver or Receivers		3 V	.65 mm	85 Cel	3.3 V		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified			1		YES	e4	30	260	3 mm		.9 ns
MAX9179EUE	Maxim Integrated	LINE RECEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS		EIA-644; TIA-644	15 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G16	1	1.1 mm	4.4 mm	Not Qualified	4 Amp		4			e0			5 mm		4.6 ns
SN65LBC172A16DWR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BICMOS	11 ns	EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482	23 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.4	4.75 V	Line Driver or Receivers		4.75 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified					YES	e4	30	260	10.3 mm	1 V	0 ns
TSB41BA3IPFP	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	6			IEEE 1394		DIFFERENTIAL	3.3 V		1.8,3.3		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	6		QUAD	S-PQFP-G80		1.2 mm	12 mm	Not Qualified	4 Amp		6		YES		NOT SPECIFIED	NOT SPECIFIED	12 mm	.172 V	0 ns
ST3232EBPR	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2			EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP16,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	3	2 mm	5 mm	Not Qualified	1.6 Amp		2		NO	e4			6.2 mm	10 V	0 ns
MAX211IDB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4			EIA-232-F; TIA-232-F; V.28	20 mA	SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	4.5 V	Line Driver or Receivers	.0002 Amp	4.5 V	.65 mm	85 Cel	5 V		-40 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G28	1	2 mm	5.3 mm	Not Qualified	1.6 Amp		5		NO	e4	NOT SPECIFIED	260	10.2 mm	10 V	1000 ns
MAX211IDWR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4			EIA-232-F; TIA-232-F; V.28	20 mA	SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP28,.4	4.5 V	Line Driver or Receivers	.0002 Amp	4.5 V	1.27 mm	85 Cel	5 V		-40 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp		5		NO	e4	NOT SPECIFIED	260	17.9 mm	10 V	1000 ns
MAX211IDW	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4			EIA-232-F; TIA-232-F; V.28	20 mA	SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP28,.4	4.5 V	Line Driver or Receivers	.0002 Amp	4.5 V	1.27 mm	85 Cel	5 V		-40 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp		5		NO	e4	NOT SPECIFIED	260	17.9 mm	10 V	1000 ns
STLVDS9637BDR	STMicroelectronics	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2			EIA-644; TIA-644; EIA-422-B; TIA-422-B	10 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp		2		NO	e4			4.9 mm		3.3 ns
74LVC161284TTR	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	9 ns	IEEE 1284		SCHMITT TRIGGER	3.3 V	5.5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V			3 V	.5 mm	85 Cel			-40 Cel	8	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G48	3	1.2 mm	6.1 mm	Not Qualified			8		NO	e3	30	260	12.5 mm		9 ns
EL5172IS	Intersil	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BIPOLAR		GENERAL PURPOSE	7 mA	DIFFERENTIAL	5 V		+-5	-5 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		2.375 V	1.27 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G8	1	1.7272 mm	3.9116 mm	Not Qualified			1		NO	e0			4.9022 mm		0 ns
MAX202IDW	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2			EIA-232-F; TIA-232-F; V.28	15 mA	SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP16,.4	4.5 V	Line Driver or Receivers	.00001 Amp	4.5 V	1.27 mm	85 Cel	5 V		-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	2		NO	e4	NOT SPECIFIED	260	10.3 mm	10 V	10000 ns
MAX202ID	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2			EIA-232-F; TIA-232-F; V.28	15 mA	SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP16,.25	4.5 V	Line Driver or Receivers	.00001 Amp	4.5 V	1.27 mm	85 Cel	5 V		-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	1.6 Amp	INVERTED	2		NO	e4	NOT SPECIFIED	260	9.9 mm	10 V	10000 ns
MAX202IN	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	2			EIA-232-F; TIA-232-F; V.28	15 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00001 Amp	4.5 V	2.54 mm	85 Cel			-40 Cel	2		DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	1.6 Amp		2		NO				19.305 mm	10 V	10000 ns
ADM2587EBRWZ-REEL7	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		700 ns	EIA-485-A; TIA-485-A; ISO 8482E	120 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G20	3	2.65 mm	7.5 mm	Not Qualified	1.5 Amp		1		YES	e3	30	260	12.8 mm	1.5 V	200 ns
ADN4663BRZ	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2	CMOS	1.5 ns	EIA-644; TIA-644			3.3 V				SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified					YES	e3	30	260	4.9 mm		1.5 ns
MAX207IDW	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS	10000 ns	EIA-232-F; TIA-232-F; V.28	20 mA	SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP24,.4	4.5 V	Line Driver or Receivers	.0002 Amp	4.5 V	1.27 mm	85 Cel	5 V		-40 Cel	5	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	3		NO	e4	NOT SPECIFIED	260	15.4 mm	10 V	10000 ns
MAX9395EHJ	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	32	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	BIPOLAR	.72 ns	EIA-644; TIA-644		DIFFERENTIAL	3.3 V				FLATPACK, THIN PROFILE, FINE PITCH					3 V	.5 mm	85 Cel			-40 Cel	1	TIN LEAD	QUAD	S-PQFP-G32	1	1.2 mm	5 mm	Not Qualified			1		YES	e0			5 mm		.72 ns
TB5D1MD	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		3.5 ns	GENERAL PURPOSE	40 mA	STANDARD	3.3 V	3.6 V	3.3/5		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.0001 Amp	4.5 V	1.27 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	2	1.75 mm	3.9 mm	Not Qualified				ALSO OPERATES WITH 5V SUPPLY	YES	e4	NOT SPECIFIED	250	9.9 mm	.5 V	0 ns
TB5D2HDW	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		3.5 ns	GENERAL PURPOSE	40 mA	STANDARD	3.3 V	3.6 V	3.3/5		SMALL OUTLINE	SOP16,.4	3 V	Line Driver or Receivers	.0001 Amp	4.5 V	1.27 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	2	2.65 mm	7.5 mm	Not Qualified				ALSO OPERATES WITH 5V SUPPLY	YES	e4	NOT SPECIFIED	250	10.3 mm	.5 V	0 ns
TB5D2HD	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		3.5 ns	GENERAL PURPOSE	40 mA	STANDARD	3.3 V	3.6 V	3.3/5		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.0001 Amp	4.5 V	1.27 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	2	1.75 mm	3.9 mm	Not Qualified				ALSO OPERATES WITH 5V SUPPLY	YES	e4	NOT SPECIFIED	250	9.9 mm	.5 V	0 ns
TSB81BA3IPFP	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	2.05 V	6	CMOS		IEEE 1394		DIFFERENTIAL	1.95 V	3.6 V	1.8,3.3		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ	3 V	Line Driver or Receivers		1.85 V	.5 mm	85 Cel	3.3 V		-40 Cel	6		QUAD	S-PQFP-G80		1.2 mm	12 mm	Not Qualified	4 Amp		6		YES		NOT SPECIFIED	NOT SPECIFIED	12 mm	.172 V	0 ns
MAX3362EKA-T	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.465 V	1	BICMOS	50 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, LOW PROFILE, SHRINK PITCH					3.135 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.45 mm	1.625 mm	Not Qualified			1		YES	e0			2.9 mm		50 ns
MAX3224EUP	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	BICMOS		EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G20	1	1.1 mm	4.4 mm	Not Qualified	1.6 Amp		2		NO	e0			6.5 mm	10 V	0 ns
MAX202EUE	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING		TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	CMOS		EIA-232-E; TIA-232-E; V.28		SCHMITT TRIGGER	5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					4.5 V	.65 mm	85 Cel			-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G	1	1.1 mm	4.4 mm	Not Qualified			5		NO	e0			5 mm		40000 ns
EL5373IU	Intersil	LINE DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	5 V		5	-5 V	SMALL OUTLINE, SHRINK PITCH	SSOP24,.24		Line Driver or Receivers		2.375 V	.635 mm	85 Cel		3-STATE	-40 Cel	3	TIN LEAD	DUAL	R-PDSO-G24	1	1.7272 mm	3.9116 mm	Not Qualified					YES	e0			8.6614 mm	3.7 V	0 ns
NBSG16MMNR2	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.465 V	1		.155 ns	GENERAL PURPOSE		DIFFERENTIAL	2.5 V		+-2.5/+-3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20		Line Driver or Receivers	.0001 Amp	2.375 V	.5 mm	85 Cel			-40 Cel	1	TIN LEAD	QUAD	S-PQCC-N16		1 mm	3 mm	Not Qualified			1		YES	e0		235	3 mm		.155 ns
NBSG16MMN	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.465 V	1		.155 ns	GENERAL PURPOSE		DIFFERENTIAL	2.5 V		+-2.5/+-3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20		Line Driver or Receivers	.0001 Amp	2.375 V	.5 mm	85 Cel			-40 Cel	1	Tin/Lead (Sn90Pb10)	QUAD	S-PQCC-N16		1 mm	3 mm	Not Qualified			1		YES	e0	30	235	3 mm		.155 ns
TB5R1DW	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4			GENERAL PURPOSE	40 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP16,.4	4.5 V	Line Driver or Receivers	.00002 Amp	4.5 V	1.27 mm	85 Cel	5 V		-40 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	2	2.65 mm	7.5 mm	Not Qualified	8 Amp	TRUE	4		NO	e4	NOT SPECIFIED	250	10.3 mm		5 ns
MAX3453EEUD	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	BICMOS	18 ns	GENERAL PURPOSE		DIFFERENTIAL	2.5 V	5.5 V	1.8/3.3,5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	4 V	Line Driver or Receivers		1.65 V	.65 mm	85 Cel	5 V		-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G14	1	1.1 mm	4.4 mm	Not Qualified	2 Amp		1		YES	e0			5 mm		22 ns
MAX3465EPD	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	BICMOS	15 ns	EIA-422-B; TIA-422-B; EIA-485-A; TIA-485-A; V.11; X.27	4 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers		4.75 V	2.54 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDIP-T14	1	4.572 mm	7.62 mm	Not Qualified	4 Amp		1		YES	e0			19.05 mm	2.1 V	20 ns
MAX3466EPD	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	BICMOS	15 ns	EIA-422-B; TIA-422-B; EIA-485-A; TIA-485-A; V.11; X.27	4 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers		4.75 V	2.54 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDIP-T14	1	4.572 mm	7.62 mm	Not Qualified	4 Amp		1		YES	e0			19.05 mm	2.1 V	20 ns
MAX3466ESD	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS	15 ns	EIA-422-B; TIA-422-B; EIA-485-A; TIA-485-A; V.11; X.27	4 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		4.75 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	4 Amp		1		YES	e0			8.65 mm	2.1 V	20 ns
MAX3467EPA	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	BICMOS	15 ns	EIA-422-B; TIA-422-B; EIA-485-A; TIA-485-A; V.11; X.27	4 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers		4.75 V	2.54 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDIP-T8	1	4.572 mm	7.62 mm	Not Qualified	4 Amp		1		YES	e0			9.375 mm	2.1 V	20 ns
MAX9220EUM	Maxim Integrated	LINE RECEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS		EIA-644; TIA-644		DIFFERENTIAL	3.3 V		3.3,3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G48	3	1.1 mm	6.1 mm	Not Qualified			4		NO	e0			12.5 mm		0 ns
TSB41BA3DIPFP	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	80	HQCCN	SQUARE	PLASTIC/EPOXY	YES	2 V	2			IEEE 1394B	150 mA	DIFFERENTIAL	1.85 V	3.6 V	1.8,3.3		CHIP CARRIER, HEAT SINK/SLUG	TQFP80,.55SQ	3 V	Line Driver or Receivers		1.75 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	2	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N80	3	1.2 mm	12 mm	Not Qualified	4 Amp	COMPLEMENTARY	2		YES	e4	30	260	12 mm	.172 V	0 ns
74ACT1284TTR	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS	8.5 ns	IEEE 1284		SCHMITT TRIGGER	5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					4.5 V	.65 mm	85 Cel			-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20		1.2 mm	4.4 mm	Not Qualified			7		NO	e4			6.5 mm		8.5 ns
ADM1485ARZ-REEL7	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS	15 ns	EIA-422; EIA-485	2.2 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.000001 Amp	4.75 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	4 Amp		1	THERMAL SHUTDOWN PROTECTION	YES	e3	30	260	4.9 mm	1.5 V	30 ns
SN65MLVD204AD	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	BICMOS	3.5 ns	EIA-899; TIA-899	24 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm	3.899 mm	Not Qualified	.01 Amp	COMPLEMENTARY	1		YES	e4	NOT SPECIFIED	260	4.9 mm	.48 V	6 ns
TSB81BA3IPFPEP	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	2.05 V	6	CMOS		IEEE 1394		DIFFERENTIAL	1.95 V	3.6 V	1.8,3.3		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ	3 V	Line Driver or Receivers		1.85 V	.5 mm	85 Cel	3.3 V		-40 Cel	6	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G80	3	1.2 mm	12 mm	Not Qualified	4 Amp		6		YES	e4	30	260	12 mm	.172 V	0 ns
GD65232PW	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	BIPOLAR	175 ns	EIA-232-F; TIA-232-F; V.28		SCHMITT TRIGGER	5 V	15 V	5,+-9	-9 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	7.5 V	Line Driver or Receivers	.00001 Amp	4.5 V	.65 mm	85 Cel	9 V		-40 Cel	3		DUAL	R-PDSO-G20		1.2 mm	4.4 mm	Not Qualified	10 Amp		5	EASY INTERFACE BETWEEN UART, SERIAL-PORT CONNECTOR OF IBM PC/AT	NO		NOT SPECIFIED	NOT SPECIFIED	6.5 mm	12 V	150 ns
MAX207IDB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS	10000 ns	EIA-232-F; TIA-232-F; V.28	20 mA	SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE, SHRINK PITCH	SSOP24,.3	4.5 V	Line Driver or Receivers	.0002 Amp	4.5 V	.65 mm	85 Cel	5 V		-40 Cel	5	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G24	1	2 mm	5.3 mm	Not Qualified	1.6 Amp		3		NO	e4	NOT SPECIFIED	260	8.2 mm	10 V	10000 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.